[pull] master from torvalds:master #36

pull · 2020-07-22T19:13:38Z

See Commits and Changes for more details.

Created by pull[bot]. Want to support this open source service? Please star it : )

When building on allyesconfig kernel for a NO_DMA=y platform (e.g. Sun-3), CONFIG_SND_SOC_QCOM_COMMON=y, but CONFIG_SND_SOC_QDSP6_AFE=n, leading to a link failure: sound/soc/qcom/common.o: In function `qcom_snd_parse_of': common.c:(.text+0x2e2): undefined reference to `q6afe_is_rx_port' While SND_SOC_QDSP6 depends on HAS_DMA, SND_SOC_MSM8996 and SND_SOC_SDM845 don't, so the following warning is seen: WARNING: unmet direct dependencies detected for SND_SOC_QDSP6 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && HAS_DMA [=n] Selected by [y]: - SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] - SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && CROS_EC [=y] && I2C [=y] && SOUNDWIRE [=y] Until recently, this warning was harmless (from a compile-testing point-of-view), but the new user of q6afe_is_rx_port() turned this into a hard failure. As the QDSP6 driver itself builds fine if NO_DMA=y, and it depends on QCOM_APR (which in turns depends on ARCH_QCOM || COMPILE_TEST), it is safe to increase compile testing coverage. Hence fix the link failure by dropping the HAS_DMA dependency of SND_SOC_QDSP6. Fixes: a212008 ("ASoC: qcom: common: set correct directions for dailinks") Fixes: 6b1687b ("ASoC: qcom: add sdm845 sound card support") Fixes: a6f933f ("ASoC: qcom: apq8096: Add db820c machine driver") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200629122443.21736-1-geert@linux-m68k.org Signed-off-by: Mark Brown <broonie@kernel.org>

The default mode for SSP configuration is TDM 4 slot and so far we were using this for the bus format on cht-bsw-rt56732 boards. One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The second piggy-backed, output-only codec is inside the keyboard-dock (which has extra speakers). Unlike the main rt5672 codec, we cannot configure this codec, it is hard coded to use 2 channel 24 bit I2S. Using 4 channel TDM leads to the dock speakers codec (which listens in on the data send from the SSP to the rt5672 codec) emiting horribly distorted sound. Since we only support 2 channels anyways, there is no need for TDM on any cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere. This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing the bus format set in cht_codec_fixup() to I2S 2 channel. This change has been tested on the following devices with a rt5672 codec: Lenovo Miix 2 10 Lenovo Thinkpad 8 Lenovo Thinkpad 10 (gen 1) Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>

The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage, so the correct mask is 0x7 not 0x3. Because of this wrong mask we were programming the ldo bits to a setting of binary 001 (0x05 & 0x03) instead of binary 101 when moving to SND_SOC_BIAS_PREPARE. According to the datasheet 001 is a reserved value, so no idea what it did, since the driver was working fine before I guess we got lucky and it does something which is ok. Fixes: 5e8351d ("ASoC: add RT5670 CODEC driver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>

…Lenovo Miix 2 10 The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock. Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is actually used to enable the amplifier for these speakers (the IRQ to the CPU comes directly from the jack-detect switch). Add a quirk for having an ext speaker-amplifier enable pin on GPIO1 and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external speaker-amplifier as necessary. Also update the ident field for the dmi_system_id table entry, the Miix models are not Thinkpads. Fixes: 67e03ff ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk") Signed-off-by: Hans de Goede <hdegoede@redhat.com> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>

…of 10 The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB, not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace apps which translate the dB scale to a linear scale. With the logarithmic dB scale being of by a factor of 10 we loose all precision in the lower area of the range when apps translate things to a linear scale. E.g. the 0 dB default, which corresponds with a value of 47 of the 0 - 127 range for the control, would be shown as 0/100 in alsa-mixer. Since the centi-dB values used in the TLV struct cannot represent the 0.375 dB step size used by these controls, change the TLV definition for them to specify a min and max value instead of min + stepsize. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200628155231.71089-5-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>

…soundwire mode Base on https://patchwork.kernel.org/patch/11237953/ Soundwire mode also should follow it. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200701071645.32061-1-oder_chiou@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>

When snd_pci_acp3x driver loads we see: WARNING kernel:snd_pci_acp3x 0000:04:00.5: Unbalanced pm_runtime_enable! at boot time. same can be observed in /var/log/messages/. Modifying pm runtime sequence for fixing unbalanced pm issue. Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/20200630092242.7799-1-Vishnuvardhanrao.Ravulapati@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>

S8 and S24 formats does not work on this machine driver so force to use S16_LE instead. In addition, add constraint to limit the max value of rate because the rate higher than 96000(172000, 192000) is not stable either. Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Link: https://lore.kernel.org/r/20200630091615.4020059-1-yuhsuan@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>

The following build warnings are seen with 'make dt_binding_check': Documentation/devicetree/bindings/sound/simple-card.example.dts:209.46-211.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:213.37-215.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:250.42-261.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:263.42-288.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:270.32-272.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:273.23-275.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:276.23-278.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@2: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:279.23-281.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@3: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/sound/simple-card.example.dts:290.42-303.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@2: node has a unit name, but no reg or ranges property Fix them all. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200630223020.25546-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>

I hand over the maintenance of these drivers to my colleagues. Claudiu, Codrin and Tudor already have experience with these controllers and sub-systems. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200702134224.3750-1-nicolas.ferre@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>

The ASoC devm_ functions that register a component (devm_snd_soc_register_component and devm_snd_dmaengine_pcm_register) will clean their component by running snd_soc_unregister_component. snd_soc_unregister_component will then remove all the components for the device that was used to register the component in the first place. However, some drivers register several components (such as a DAI and a dmaengine PCM) on the same device, and if the dmaengine PCM is registered first, then the DAI will be cleaned up first and snd_dmaengine_pcm_unregister will be called next. snd_dmaengine_pcm_unregister will then lookup the dmaengine PCM component on the device, and if there's one unregister that component and release its dmaengine channels. That doesn't happen in practice though since the first call to snd_soc_unregister_component removed all the components, so we never get the chance to release the dmaengine channels. In order to fix this, instead of removing all the components for a given device, we can simply remove the component that was registered in the first place. We should have the same number of component registration than we have components, so it should work just fine. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200707074237.287171-1-maxime@cerno.tech Signed-off-by: Mark Brown <broonie@kernel.org>

Add Shengjiu who's actively working on the latest fsl/nxp audio drivers. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20200707045829.10002-1-nicoleotsuka@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>

Add a helper to walk through all the DAIs and set dpcm_playback and dpcm_capture flags based on the DAIs capabilities, and use this helper to avoid setting these flags arbitrarily in generic cards. The commit referenced in the Fixes tag did not introduce the configuration issue but will prevent the card from probing when detecting invalid configurations. Fixes: b73287f ('ASoC: soc-pcm: dpcm: fix playback/capture checks') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200707210439.115300-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

When SOF is used, the normal links are converted into DPCM ones. This generates an error [ 58.276668] bdw-rt5677 bdw-rt5677: CPU DAI spi-RT5677AA:00 for rtd Wake on Voice does not support playback [ 58.276676] bdw-rt5677 bdw-rt5677: ASoC: can't create pcm Wake on Voice :-22 Fix by forcing the capture direction. Fixes: b73287f ('ASoC: soc-pcm: dpcm: fix playback/capture checks') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Curtis Malainey <curtis@malainey.com> Link: https://lore.kernel.org/r/20200707210439.115300-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

This is identical with change for Intel platforms done with commit 8c05246 ("ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell") and fixes a regression on i.MX8/i.MX8M: [ 25.705750] esai-Codec: ASoC: no backend playback stream [ 27.923378] esai-Codec: ASoC: no users playback at close - state This is root-caused to the introduction of the DAI capability checks with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a requirement for all DAIs to report at least a non-zero min_channels field. Fixes: 9b5db05 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported") Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200707210439.115300-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

When errors happens while loading graph components, the kernel oopses while trying to remove all topology components. This can be root-caused to a list pointing to memory that was already freed on error. remove_route() is already called on errors and will perform the required cleanups so there's no need to free the route memory in soc_tplg_dapm_graph_elems_load() if the route was added to the list. We do however want to free the routes allocated but not added to the list. Fixes: 7df04ea ('ASoC: topology: modify dapm route loading routine and add dapm route unloading') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200707203749.113883-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

we need to free all allocated tlvs, not just the one allocated in the loop before releasing kcontrols - other the tlvs references will leak. Fixes: 9f90af3 ('ASoC: topology: Consolidate and fix asoc_tplg_dapm_widget_*_create flow') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200707203749.113883-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

…default Volume control in probe function is not necessary. Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200707205740.114927-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

Idle_bias_on is used to decide bias on/off in standby state by dapm. When Idle_bias_on is set to one, dapm will keep max98373 active at idle time. Max98373 is doing nothing in this state, so remove idle_bias_on setting to let max98373 get suspended when it is idle. Signed-off-by: randerwang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ryan Lee <ryans.lee@maximintegrated.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200707205740.114927-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

The DSP should be notified for device removal only if the probe was successful. Fixes the following KASAN bug: BUG: KASAN: null-ptr-deref in sof_ipc_tx_message+0x80/0x160 [snd_sof] Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200707204027.114169-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>

…e-Louis Bossart <pierre-louis.bossart@linux.intel.com>: V2 with a number of cleanups: split between I2C and SoundWire modes, as done for rt5682, and updated Kconfigs. removed useless initializations common to both modes removed idle_bias on fixed register classified as volatile in error fixed SPDX comments Pierre-Louis Bossart (2): ASoC: codecs: max98373: split I2C and common parts ASoC: Intel: sof-sdw: add MAX98373 I2C dependencies Ryan Lee (2): ASoC: codecs: max98373: Removed superfluous volume control from chip default ASoC: codecs: max98373: add SoundWire support randerwang (2): ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend ASoC: Intel: sdw_max98373: add card_late_probe support sound/soc/codecs/Kconfig | 20 +- sound/soc/codecs/Makefile | 4 + sound/soc/codecs/max98373-i2c.c | 612 +++++++++++++++ sound/soc/codecs/max98373-sdw.c | 887 ++++++++++++++++++++++ sound/soc/codecs/max98373-sdw.h | 72 ++ sound/soc/codecs/max98373.c | 619 +-------------- sound/soc/codecs/max98373.h | 17 +- sound/soc/intel/boards/Kconfig | 7 +- sound/soc/intel/boards/sof_sdw.c | 19 +- sound/soc/intel/boards/sof_sdw_common.h | 6 + sound/soc/intel/boards/sof_sdw_max98373.c | 12 + 11 files changed, 1668 insertions(+), 607 deletions(-) create mode 100644 sound/soc/codecs/max98373-i2c.c create mode 100644 sound/soc/codecs/max98373-sdw.c create mode 100644 sound/soc/codecs/max98373-sdw.h base-commit: a5911ac -- 2.25.1

…uis Bossart <pierre-louis.bossart@linux.intel.com>: While experimenting and introducing errors in Baytrail topology files until I got them right, I encountered multiple kernel oopses and memory leaks. This is a first batch to harden the code, but we should probably think of a tool to fuzz the topology... Pierre-Louis Bossart (5): ASoC: topology: fix kernel oops on route addition error ASoC: topology: fix tlvs in error handling for widget_dmixer ASoC: topology: use break on errors, not continue ASoC: topology: factor kfree(se) in error handling ASoC: topology: add more logs when topology load fails. sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++---------------- 1 file changed, 58 insertions(+), 39 deletions(-) base-commit: a5911ac -- 2.25.1

…sart <pierre-louis.bossart@linux.intel.com>: This is hopefully the last set of fixes to avoid probe errors due to stricter checks of DAI capabilities introduced late in the 5.8 cycle. Daniel Baluta (1): ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M Pierre-Louis Bossart (2): ASoC: soc-dai: set dai_link dpcm_ flags with a helper ASoC: Intel: bdw-rt5677: fix non BE conversion include/sound/soc-dai.h | 1 + sound/soc/generic/audio-graph-card.c | 4 +-- sound/soc/generic/simple-card.c | 4 +-- sound/soc/intel/boards/bdw-rt5677.c | 1 + sound/soc/soc-dai.c | 38 ++++++++++++++++++++++++++++ sound/soc/sof/imx/imx8.c | 8 ++++++ sound/soc/sof/imx/imx8m.c | 8 ++++++ 7 files changed, 60 insertions(+), 4 deletions(-) base-commit: a5911ac -- 2.25.1

Clear BIT6 of INPPGA means not muted (Switch On). Signed-off-by: Puyou Lu <puyou.lu@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1593657025-4903-1-git-send-email-puyou.lu@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>

In DSP_A mode, BIT7 of IFACE should bit 0 according to datasheet (ie. inverted frame clock is not support in this mode). Signed-off-by: Puyou Lu <puyou.lu@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1593657056-4989-1-git-send-email-puyou.lu@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>

The HV/VREF should not turn off if the headphone jack plug-in. This patch could solve the unexpected interrupt issue in some devices. Signed-off-by: Shuming Fan <shumingf@realtek.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200709101345.11449-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>

Enable Vref2 under long term using PLL2 to avoid clock unstable. Signed-off-by: derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1594721600-29994-1-git-send-email-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>

snd_byt_cht_es8316_mc_probe() misses to call put_device() in an error path. Add the missed function call to fix it. Fixes: ba49cf6 ("ASoC: Intel: bytcht_es8316: Add quirk for inverted jack detect") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200714080918.148196-1-jingxiangfeng@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>

The irq work will be manipulated by resume function, and it will report the wrong jack type while the jack type is headphone in the button event. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200716030123.27122-1-oder_chiou@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>

snd_info_get_line() has a sanity check of NULL buffer -- both buffer itself being NULL and buffer->buffer being NULL. Basically both checks are valid and necessary, but the problem is that it's with snd_BUG_ON() macro that triggers WARN_ON(). The latter condition (NULL buffer->buffer) can be met arbitrarily by user since the buffer is allocated at the first write, so it means that user can trigger WARN_ON() at will. This patch addresses it by simply moving buffer->buffer NULL check out of snd_BUG_ON() so that spurious WARNING is no longer triggered. Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>

…/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.8 An awful lot of mostly small fixes here, mainly for x86 based platforms and the CODEC drivers mainly used on them. For the most part this is either minor device specific stuff which seems to come from detailed testing or robustness against errors which comes from people having done some fuzzing runs aginst the topology code.

… Notebook Pen S Fixed no headphone sound bug on laptop Samsung Notebook Pen S (950SBE-951SBE), by using existing patch in Linus' tree, commit 14425f1 (ALSA: hda/realtek: Add quirk for Samsung Notebook). This laptop uses the same ALC298 but different subsystem id 0x144dc812. I added SND_PCI_QUIRK at sound/pci/hda/patch_realtek.c Signed-off-by: Joonho Wohn <doomsheart@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CAHcbMh291aWDKiWSZoxXB4-Eru6OYRwGA4AVEdCZeYmVLo5ZxQ@mail.gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>

…l/git/tiwai/sound into master Pull sound fixes from Takashi Iwai: "This became fairly large, containing mostly the collection of ASoC fixes that slipped from the previous request, so I sent now a bit earlier than usual. But all changes look small and mostly device-specific, hence nothing to worry too much. Majority of changes are for x86 based platforms and their CODEC drivers, in order to address some issues hit by their recent tests and fuzzing. The rest are other ASoC device-specific fixes (imx, qcom, wm8974, amd, rockchip) as well as a trivial fix for a kernel WARNING hit by syzkaller" * tag 'sound-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S ALSA: info: Drop WARN_ON() from buffer NULL sanity check ASoC: rt5682: Report the button event in the headset type only ASoC: Intel: bytcht_es8316: Add missed put_device() ASoC: rt5682: Enable Vref2 under using PLL2 ASoC: rt286: fix unexpected interrupt happens ASoC: wm8974: remove unsupported clock mode ASoC: wm8974: fix Boost Mixer Aux Switch ASoC: SOF: core: fix null-ptr-deref bug during device removal ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend ASoC: codecs: max98373: Removed superfluous volume control from chip default ASoC: topology: fix tlvs in error handling for widget_dmixer ASoC: topology: fix kernel oops on route addition error ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M ASoC: Intel: bdw-rt5677: fix non BE conversion ASoC: soc-dai: set dai_link dpcm_ flags with a helper MAINTAINERS: Add Shengjiu to reviewer list of sound/soc/fsl ASoC: core: Remove only the registered component in devm functions MAINTAINERS: Change Maintainer for some at91 drivers ASoC: dt-bindings: simple-card: Fix 'make dt_binding_check' warnings ...

Several notifiers are registered as part of router initialization. Since some of these notifiers are registered before the end of the initialization, it is possible for them to access uninitialized or freed memory when processing notifications [1]. Additionally, some of these notifiers queue work items on a workqueue. If these work items are executed after the router was de-initialized, they will access freed memory. Fix both problems by moving the registration of the notifiers to the end of the router initialization and flush the work queue after they are unregistered. [1] BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:938 [inline] BUG: KASAN: use-after-free in __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103 Read of size 8 at addr ffff888038c3a6e0 by task kworker/u4:1/61 CPU: 1 PID: 61 Comm: kworker/u4:1 Not tainted 5.8.0-rc2+ #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mlxsw_core_ordered mlxsw_sp_inet6addr_event_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 __mutex_lock_common kernel/locking/mutex.c:938 [inline] __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103 mlxsw_sp_inet6addr_event_work+0xb3/0x1b0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7123 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 1298: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] mlxsw_sp_router_init+0xb2/0x1d20 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:8074 mlxsw_sp_init+0xbd8/0x3ac0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2932 __mlxsw_core_bus_device_register+0x657/0x10d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1375 mlxsw_core_bus_device_register drivers/net/ethernet/mellanox/mlxsw/core.c:1436 [inline] mlxsw_devlink_core_bus_device_reload_up+0xcd/0x150 drivers/net/ethernet/mellanox/mlxsw/core.c:1133 devlink_reload net/core/devlink.c:2959 [inline] devlink_reload+0x281/0x3b0 net/core/devlink.c:2944 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1348: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4063 mlxsw_sp_fini+0x340/0x4e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3132 mlxsw_core_bus_device_unregister+0x16c/0x6d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1474 mlxsw_devlink_core_bus_device_reload_down+0x8e/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:1123 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888038c3a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1760 bytes inside of 2048-byte region [ffff888038c3a000, ffff888038c3a800) The buggy address belongs to the page: page:ffffea0000e30e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea0000e30e00 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c40c000 raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888038c3a580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888038c3a600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888038c3a680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888038c3a700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888038c3a780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 965fa8e ("mlxsw: spectrum_router: Make RIF deletion more robust") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…me PM The ch->lock is used to protect the whole enable() and read() of sh_cmt's implementation of struct clocksource. The enable() implementation calls pm_runtime_get_sync() which may result in the clock source to be read() triggering a cyclic lockdep warning for the ch->lock. The sh_cmt driver implement its own balancing of calls to sh_cmt_{enable,disable}() with flags in sh_cmt_{start,stop}(). It does this to deal with that start and stop are shared between the clock source and clock event providers. While this could be improved on verifying corner cases based on any substantial rework on all devices this driver supports might prove hard. As a first step separate the PM handling for clock event and clock source. Always put/get the device when enabling/disabling the clock source but keep the clock event logic unchanged. This allows the sh_cmt implementation of struct clocksource to call PM without holding the ch->lock and avoiding the deadlock. Triggering and log of the deadlock warning, # echo e60f0000.timer > /sys/devices/system/clocksource/clocksource0/current_clocksource [ 46.948370] ====================================================== [ 46.954730] WARNING: possible circular locking dependency detected [ 46.961094] 5.10.0-rc6-arm64-renesas-00001-g0e5fd7414e8b #36 Not tainted [ 46.967985] ------------------------------------------------------ [ 46.974342] migration/0/11 is trying to acquire lock: [ 46.979543] ffff0000403ed220 (&dev->power.lock){-...}-{2:2}, at: __pm_runtime_resume+0x40/0x74 [ 46.988445] [ 46.988445] but task is already holding lock: [ 46.994441] ffff000040ad0298 (&ch->lock){....}-{2:2}, at: sh_cmt_start+0x28/0x210 [ 47.002173] [ 47.002173] which lock already depends on the new lock. [ 47.002173] [ 47.010573] [ 47.010573] the existing dependency chain (in reverse order) is: [ 47.018262] [ 47.018262] -> #3 (&ch->lock){....}-{2:2}: [ 47.024033] lock_acquire.part.0+0x120/0x330 [ 47.028970] lock_acquire+0x64/0x80 [ 47.033105] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.038130] sh_cmt_start+0x28/0x210 [ 47.042352] sh_cmt_clocksource_enable+0x28/0x50 [ 47.047644] change_clocksource+0x9c/0x160 [ 47.052402] multi_cpu_stop+0xa4/0x190 [ 47.056799] cpu_stopper_thread+0x90/0x154 [ 47.061557] smpboot_thread_fn+0x244/0x270 [ 47.066310] kthread+0x154/0x160 [ 47.070175] ret_from_fork+0x10/0x20 [ 47.074390] [ 47.074390] -> #2 (tk_core.seq.seqcount){----}-{0:0}: [ 47.081136] lock_acquire.part.0+0x120/0x330 [ 47.086070] lock_acquire+0x64/0x80 [ 47.090203] seqcount_lockdep_reader_access.constprop.0+0x74/0x100 [ 47.097096] ktime_get+0x28/0xa0 [ 47.100960] hrtimer_start_range_ns+0x210/0x2dc [ 47.106164] generic_sched_clock_init+0x70/0x88 [ 47.111364] sched_clock_init+0x40/0x64 [ 47.115853] start_kernel+0x494/0x524 [ 47.120156] [ 47.120156] -> #1 (hrtimer_bases.lock){-.-.}-{2:2}: [ 47.126721] lock_acquire.part.0+0x120/0x330 [ 47.136042] lock_acquire+0x64/0x80 [ 47.144461] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.153721] hrtimer_start_range_ns+0x68/0x2dc [ 47.163054] rpm_suspend+0x308/0x5dc [ 47.171473] rpm_idle+0xc4/0x2a4 [ 47.179550] pm_runtime_work+0x98/0xc0 [ 47.188209] process_one_work+0x294/0x6f0 [ 47.197142] worker_thread+0x70/0x45c [ 47.205661] kthread+0x154/0x160 [ 47.213673] ret_from_fork+0x10/0x20 [ 47.221957] [ 47.221957] -> #0 (&dev->power.lock){-...}-{2:2}: [ 47.236292] check_noncircular+0x128/0x140 [ 47.244907] __lock_acquire+0x13b0/0x204c [ 47.253332] lock_acquire.part.0+0x120/0x330 [ 47.262033] lock_acquire+0x64/0x80 [ 47.269826] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.278430] __pm_runtime_resume+0x40/0x74 [ 47.286758] sh_cmt_start+0x84/0x210 [ 47.294537] sh_cmt_clocksource_enable+0x28/0x50 [ 47.303449] change_clocksource+0x9c/0x160 [ 47.311783] multi_cpu_stop+0xa4/0x190 [ 47.319720] cpu_stopper_thread+0x90/0x154 [ 47.328022] smpboot_thread_fn+0x244/0x270 [ 47.336298] kthread+0x154/0x160 [ 47.343708] ret_from_fork+0x10/0x20 [ 47.351445] [ 47.351445] other info that might help us debug this: [ 47.351445] [ 47.370225] Chain exists of: [ 47.370225] &dev->power.lock --> tk_core.seq.seqcount --> &ch->lock [ 47.370225] [ 47.392003] Possible unsafe locking scenario: [ 47.392003] [ 47.405314] CPU0 CPU1 [ 47.413569] ---- ---- [ 47.421768] lock(&ch->lock); [ 47.428425] lock(tk_core.seq.seqcount); [ 47.438701] lock(&ch->lock); [ 47.447930] lock(&dev->power.lock); [ 47.455172] [ 47.455172] *** DEADLOCK *** [ 47.455172] [ 47.471433] 3 locks held by migration/0/11: [ 47.479099] #0: ffff8000113c9278 (timekeeper_lock){-.-.}-{2:2}, at: change_clocksource+0x2c/0x160 [ 47.491834] #1: ffff8000113c8f88 (tk_core.seq.seqcount){----}-{0:0}, at: multi_cpu_stop+0xa4/0x190 [ 47.504727] #2: ffff000040ad0298 (&ch->lock){....}-{2:2}, at: sh_cmt_start+0x28/0x210 [ 47.516541] [ 47.516541] stack backtrace: [ 47.528480] CPU: 0 PID: 11 Comm: migration/0 Not tainted 5.10.0-rc6-arm64-renesas-00001-g0e5fd7414e8b #36 [ 47.542147] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 47.554241] Call trace: [ 47.560832] dump_backtrace+0x0/0x190 [ 47.568670] show_stack+0x14/0x30 [ 47.576144] dump_stack+0xe8/0x130 [ 47.583670] print_circular_bug+0x1f0/0x200 [ 47.592015] check_noncircular+0x128/0x140 [ 47.600289] __lock_acquire+0x13b0/0x204c [ 47.608486] lock_acquire.part.0+0x120/0x330 [ 47.616953] lock_acquire+0x64/0x80 [ 47.624582] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.633114] __pm_runtime_resume+0x40/0x74 [ 47.641371] sh_cmt_start+0x84/0x210 [ 47.649115] sh_cmt_clocksource_enable+0x28/0x50 [ 47.657916] change_clocksource+0x9c/0x160 [ 47.666165] multi_cpu_stop+0xa4/0x190 [ 47.674056] cpu_stopper_thread+0x90/0x154 [ 47.682308] smpboot_thread_fn+0x244/0x270 [ 47.690560] kthread+0x154/0x160 [ 47.697927] ret_from_fork+0x10/0x20 [ 47.708447] clocksource: Switched to clocksource e60f0000.timer Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201205021921.1456190-2-niklas.soderlund+renesas@ragnatech.se

…r tcpm port A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 6004071, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 111.843729] cpu_startup_entry+0x2c/0x70 [ 111.847657] rest_init+0xdc/0xec [ 111.850890] arch_call_rest_init+0x14/0x20 [ 111.854988] start_kernel+0x508/0x540 [ 111.858659] Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827) [ 111.864760] ---[ end trace 308b9a4a3dcb73ac ]--- [ 111.869381] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 111.876258] SMP: stopping secondary CPUs [ 111.880185] Kernel Offset: disabled [ 111.883673] CPU features: 0x00001001,20000846 [ 111.888031] Memory Limit: none [ 111.891090] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Fixes: 3ed8e1c ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1622627829-11070-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When optional counter support was added the allocation of the memory holding the counter descriptors was not cleared properly. This caused WARN_ON()s in the IB/sysfs code to be hit. This is because the uninitialized memory made some of the counters wrongly look like optional counters. Use kzalloc. While here change the sizeof() calls to use the pointer rather than the name of the type. WARNING: CPU: 0 PID: 32644 at drivers/infiniband/core/sysfs.c:1064 ib_setup_port_attrs+0x7e1/0x890 [ib_core] CPU: 0 PID: 32644 Comm: kworker/0:2 Tainted: G S W 5.15.0+ #36 Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 Workqueue: events work_for_cpu_fn RIP: 0010:ib_setup_port_attrs+0x7e1/0x890 [ib_core] RSP: 0018:ffffc90006ea3c40 EFLAGS: 00010202 RAX: 0000000000000068 RBX: ffff888106ad8000 RCX: 0000000000000138 RDX: ffff888126c84c00 RSI: ffff888103c41000 RDI: 0000000000000124 RBP: ffff88810f63a801 R08: ffff888126c8a000 R09: 0000000000000001 R10: ffffffffa09acf20 R11: 0000000000000065 R12: ffff88810f63a800 R13: ffff88810f63a800 R14: ffff88810f63a8e0 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff888667a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005590102cb078 CR3: 000000000240a003 CR4: 00000000001706f0 Call Trace: ib_register_device.cold.44+0x23e/0x2d0 [ib_core] rvt_register_device+0xfa/0x230 [rdmavt] hfi1_register_ib_device+0x623/0x690 [hfi1] init_one.cold.36+0x2d1/0x49b [hfi1] local_pci_probe+0x45/0x80 work_for_cpu_fn+0x16/0x20 process_one_work+0x1b1/0x360 worker_thread+0x1d4/0x3a0 kthread+0x11a/0x140 ret_from_fork+0x22/0x30 Fixes: 5e2ddd1 ("RDMA/counter: Add optional counter support") Link: https://lore.kernel.org/r/20211115200913.124104.47770.stgit@awfm-01.cornelisnetworks.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

[Why] IGT bypass test will set crc source as DPRX,and display DM didn`t check connection type, it run the test on the HDMI connector ,then the kernel will be crashed because aux->transfer is set null for HDMI connection. This patch will skip the invalid connection test and fix kernel crash issue. [How] Check the connector type while setting the pipe crc source as DPRX or auto,if the type is not DP or eDP, the crtc crc source will not be set and report error code to IGT test,IGT will show the this subtest as no valid crtc/connector combinations found. 116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode [ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 117.731001] #PF: supervisor instruction fetch in kernel mode [ 117.731003] #PF: error_code(0x0010) - not-present page [ 117.731004] PGD 0 P4D 0 [ 117.731006] Oops: 0010 [#1] SMP NOPTI [ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu [ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021 [ 117.731012] RIP: 0010:0x0 [ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246 [ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e [ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8 [ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0 [ 117.731023] PKRU: 55555554 [ 117.731024] Call Trace: [ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] [ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] [ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper] [ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu] [ 117.731149] crtc_crc_open+0x174/0x220 [drm] [ 117.731162] full_proxy_open+0x168/0x1f0 [ 117.731165] ? open_proxy_open+0x100/0x100 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Perry Yuan <Perry.Yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

…egulator The interrupt pin of the external ethernet phy is used, instead of the enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in the gpio_ao bank. This causes phy interrupt problems at system startup. [ 76.645190] irq 36: nobody cared (try booting with the "irqpoll" option) [ 76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2 [ 76.649629] Hardware name: Hardkernel ODROID-HC4 (DT) [ 76.649635] Call trace: [ 76.649638] dump_backtrace+0x0/0x1c8 [ 76.649658] show_stack+0x14/0x60 [ 76.649667] dump_stack_lvl+0x64/0x7c [ 76.649676] dump_stack+0x14/0x2c [ 76.649683] __report_bad_irq+0x38/0xe8 [ 76.649695] note_interrupt+0x220/0x3a0 [ 76.649704] handle_irq_event_percpu+0x58/0x88 [ 76.649713] handle_irq_event+0x44/0xd8 [ 76.649721] handle_fasteoi_irq+0xa8/0x130 [ 76.649730] generic_handle_domain_irq+0x38/0x58 [ 76.649738] gic_handle_irq+0x9c/0xb8 [ 76.649747] call_on_irq_stack+0x28/0x38 [ 76.649755] do_interrupt_handler+0x7c/0x80 [ 76.649763] el1_interrupt+0x34/0x80 [ 76.649772] el1h_64_irq_handler+0x14/0x20 [ 76.649781] el1h_64_irq+0x74/0x78 [ 76.649788] irq_finalize_oneshot.part.56+0x68/0xf8 [ 76.649796] irq_thread_fn+0x5c/0x98 [ 76.649804] irq_thread+0x13c/0x260 [ 76.649812] kthread+0x144/0x178 [ 76.649822] ret_from_fork+0x10/0x20 [ 76.649830] handlers: [ 76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt [ 76.661256] Disabling IRQ #36 Fixes: 1f80a5c ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator") Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: removed spurious invalid & blank lines from commit message] Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox

Inspired by commit 9fb7410("arm64/BUG: Use BRK instruction for generic BUG traps"), do similar for LoongArch to use generic BUG() handler. This patch uses the BREAK software breakpoint instruction to generate a trap instead, similarly to most other arches, with the generic BUG code generating the dmesg boilerplate. This allows bug metadata to be moved to a separate table and reduces the amount of inline code at BUG() and WARN() sites. This also avoids clobbering any registers before they can be dumped. To mitigate the size of the bug table further, this patch makes use of the existing infrastructure for encoding addresses within the bug table as 32-bit relative pointers instead of absolute pointers. (Note: this limits the max kernel size to 2GB.) Before patch: [ 3018.338013] lkdtm: Performing direct entry BUG [ 3018.342445] Kernel bug detected[#5]: [ 3018.345992] CPU: 2 PID: 865 Comm: cat Tainted: G D 6.0.0-rc6+ #35 After patch: [ 125.585985] lkdtm: Performing direct entry BUG [ 125.590433] ------------[ cut here ]------------ [ 125.595020] kernel BUG at drivers/misc/lkdtm/bugs.c:78! [ 125.600211] Oops - BUG[#1]: [ 125.602980] CPU: 3 PID: 410 Comm: cat Not tainted 6.0.0-rc6+ #36 Out-of-line file/line data information obtained compared to before. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In ata_tdev_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x3a0 lr : device_del+0x44/0x3a0 Call trace: device_del+0x48/0x3a0 attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tdev_delete+0x24/0x50 [libata] ata_tlink_delete+0x40/0xa0 [libata] ata_tport_delete+0x2c/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tdev_add(). In the error path, device_del() is called to delete the device which was added earlier in this function, and ata_tdev_free() is called to free ata_dev. Fixes: d902747 ("[libata] Add ATA transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: stable@vger.kernel.org Fixes: 7733f6c ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeout+0x181/0x300 [ 472.096136] process_one_work+0x5d2/0xe00 [ 472.096136] worker_thread+0xe1d/0x1660 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] kthread+0x2b7/0x350 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork+0x4d/0x80 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork_asm+0x11/0x20 [ 472.096136] </TASK> [ 472.096136] Modules linked in: [ 472.096136] CR2: 0000000000000158 [ 472.096136] ---[ end trace 0000000000000000 ]--- [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.132932] Kernel panic - not syncing: Fatal exception [ 472.132932] Kernel Offset: disabled [ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]--- Add a check to judge whether the conn is null in l2cap_chan_timeout() in order to mitigate the bug. Fixes: 3df91ea ("Bluetooth: Revert to mutexes from RCU list") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When I ran the repro [0] and waited a few seconds, I observed two LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1] Reproduction Steps: 1) Mount CIFS 2) Add an iptables rule to drop incoming FIN packets for CIFS 3) Unmount CIFS 4) Unload the CIFS module 5) Remove the iptables rule At step 3), the CIFS module calls sock_release() for the underlying TCP socket, and it returns quickly. However, the socket remains in FIN_WAIT_1 because incoming FIN packets are dropped. At this point, the module's refcnt is 0 while the socket is still alive, so the following rmmod command succeeds. # ss -tan State Recv-Q Send-Q Local Address:Port Peer Address:Port FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445 # lsmod | grep cifs cifs 1159168 0 This highlights a discrepancy between the lifetime of the CIFS module and the underlying TCP socket. Even after CIFS calls sock_release() and it returns, the TCP socket does not die immediately in order to close the connection gracefully. While this is generally fine, it causes an issue with LOCKDEP because CIFS assigns a different lock class to the TCP socket's sk->sk_lock using sock_lock_init_class_and_name(). Once an incoming packet is processed for the socket or a timer fires, sk->sk_lock is acquired. Then, LOCKDEP checks the lock context in check_wait_context(), where hlock_class() is called to retrieve the lock class. However, since the module has already been unloaded, hlock_class() logs a warning and returns NULL, triggering the null-ptr-deref. If LOCKDEP is enabled, we must ensure that a module calling sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded while such a socket is still alive to prevent this issue. Let's hold the module reference in sock_lock_init_class_and_name() and release it when the socket is freed in sk_prot_free(). Note that sock_lock_init() clears sk->sk_owner for svc_create_socket() that calls sock_lock_init_class_and_name() for a listening socket, which clones a socket by sk_clone_lock() without GFP_ZERO. [0]: CIFS_SERVER="10.0.0.137" CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST" DEV="enp0s3" CRED="/root/WindowsCredential.txt" MNT=$(mktemp -d /tmp/XXXXXX) mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1 iptables -A INPUT -s ${CIFS_SERVER} -j DROP for i in $(seq 10); do umount ${MNT} rmmod cifs sleep 1 done rm -r ${MNT} iptables -D INPUT -s ${CIFS_SERVER} -j DROP [1]: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) ... Call Trace: <IRQ> __lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178) lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816) _raw_spin_lock_nested (kernel/locking/spinlock.c:379) tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350) ... BUG: kernel NULL pointer dereference, address: 00000000000000c4 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire (kernel/locking/lockdep.c:4852 kernel/locking/lockdep.c:5178) Code: 15 41 09 c7 41 8b 44 24 20 25 ff 1f 00 00 41 09 c7 8b 84 24 a0 00 00 00 45 89 7c 24 20 41 89 44 24 24 e8 e1 bc ff ff 4c 89 e7 <44> 0f b6 b8 c4 00 00 00 e8 d1 bc ff ff 0f b6 80 c5 00 00 00 88 44 RSP: 0018:ffa0000000468a10 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ff1100010091cc38 RCX: 0000000000000027 RDX: ff1100081f09ca48 RSI: 0000000000000001 RDI: ff1100010091cc88 RBP: ff1100010091c200 R08: ff1100083fe6e228 R09: 00000000ffffbfff R10: ff1100081eca0000 R11: ff1100083fe10dc0 R12: ff1100010091cc88 R13: 0000000000000001 R14: 0000000000000000 R15: 00000000000424b1 FS: 0000000000000000(0000) GS:ff1100081f080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c4 CR3: 0000000002c4a003 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816) _raw_spin_lock_nested (kernel/locking/spinlock.c:379) tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1)) ip_local_deliver_finish (./include/linux/rcupdate.h:878 net/ipv4/ip_input.c:234) ip_sublist_rcv_finish (net/ipv4/ip_input.c:576) ip_list_rcv_finish (net/ipv4/ip_input.c:628) ip_list_rcv (net/ipv4/ip_input.c:670) __netif_receive_skb_list_core (net/core/dev.c:5939 net/core/dev.c:5986) netif_receive_skb_list_internal (net/core/dev.c:6040 net/core/dev.c:6129) napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:519 ./include/net/gro.h:514 net/core/dev.c:6496) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3815) __napi_poll.constprop.0 (net/core/dev.c:7191) net_rx_action (net/core/dev.c:7262 net/core/dev.c:7382) handle_softirqs (kernel/softirq.c:561) __irq_exit_rcu (kernel/softirq.c:596 kernel/softirq.c:435 kernel/softirq.c:662) irq_exit_rcu (kernel/softirq.c:680) common_interrupt (arch/x86/kernel/irq.c:280 (discriminator 14)) </IRQ> <TASK> asm_common_interrupt (./arch/x86/include/asm/idtentry.h:693) RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:744) Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d c3 2b 15 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 RSP: 0018:ffa00000000ffee8 EFLAGS: 00000202 RAX: 000000000000640b RBX: ff1100010091c200 RCX: 0000000000061aa4 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff812f30c5 RBP: 000000000000000a R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325) default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118) do_idle (kernel/sched/idle.c:186 kernel/sched/idle.c:325) cpu_startup_entry (kernel/sched/idle.c:422 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:315) common_startup_64 (arch/x86/kernel/head_64.S:421) </TASK> Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CR2: 00000000000000c4 Fixes: ed07536 ("[PATCH] lockdep: annotate nfs/nfsd in-kernel sockets") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250407163313.22682-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 #10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f #11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf #12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 #13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 #14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d #15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e #16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad #17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e #18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 #19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 #20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 #21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 #22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 #23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 #24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 #25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc #26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 #27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 #28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 #29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d #30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 #31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 #32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 #33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d #34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 #35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e #36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 #37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 #38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 #39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 #40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 #41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4664267.LvFx2qVVIh@rjwysocki.net Signed-off-by: Tamir Duberstein <tamird@gmail.com> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The current code that checks for misspelling verifies, in a more complex regex, if $rawline matches [^\w]($misspellings)[^\w] Being $rawline a byte-string, a utf-8 character in $rawline can match the non-word-char [^\w]. E.g.: ./scripts/checkpatch.pl --git 81c2f05 WARNING: 'ment' may be misspelled - perhaps 'meant'? #36: FILE: MAINTAINERS:14360: +M: Clément Léger <clement.leger@bootlin.com> ^^^^ Use a utf-8 version of $rawline for spell checking. Link: https://lkml.kernel.org/r/20250616-b4-checkpatch-upstream-v2-1-5600ce4a3b43@foss.st.com Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfree+0xcf/0x350 [ 21.673700] input_dev_release+0xab/0xd0 [ 21.673700] device_release+0x9f/0x220 [ 21.673700] kobject_put+0x12b/0x220 [ 21.673700] put_device+0x12/0x20 [ 21.673700] input_free_device+0x4c/0xb0 [ 21.673700] hidinput_connect+0x1862/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] Fixes: 9ce12d8 ("HID: asus: Add i2c touchpad support") Cc: stable@vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250810181041.44874-1-qasdev00@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

geertu and others added 30 commits June 29, 2020 17:52

tiwai and others added 3 commits July 17, 2020 18:19

pull bot added the ⤵️ pull label Jul 22, 2020

pull bot merged commit 8c26c87 into vchong:master Jul 22, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

[pull] master from torvalds:master #36

[pull] master from torvalds:master #36

Uh oh!

pull bot commented Jul 22, 2020 •

edited

Loading

Uh oh!

Uh oh!

[pull] master from torvalds:master #36

[pull] master from torvalds:master #36

Uh oh!

Conversation

pull bot commented Jul 22, 2020 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

Uh oh!

pull bot commented Jul 22, 2020 •

edited

Loading