[pull] master from torvalds:master #24
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This event code represents the state of a removable cover of a device. Value 0 means that the cover is open or removed, value 1 means that the cover is closed. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Link: https://lore.kernel.org/r/20200612125402.18393-2-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead, expose the key via the input framework, as SW_MACHINE_COVER The chip-detect GPIO is actually detecting if the cover is closed. Technically it's possible to use the SD card with open cover. The only downside is risk of battery falling out and user being able to physically remove the card. The behaviour of SD card not being available when the device is open is unexpected and creates more problems than it solves. There is a high chance, that more people accidentally break their rootfs by opening the case without physically removing the card. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Link: https://lore.kernel.org/r/20200612125402.18393-3-merlijn@wizzup.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested on my own laptop, touchpad feels slightly more responsive with this on, though it might just be placebo. Signed-off-by: Ilya Katsnelson <me@0upti.me> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This moves the wakeup increment for elan devices to the touch report. This prevents the drivers from incorrectly reporting a wakeup when the resume callback resets then device, which causes an interrupt to occur. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
…ajor" This reverts commit 0617067 - it turns out that the resolution of 1 unit per mm was not correct for a number of touch screens, causing touch sizes to be reported as way too large. See https://crbug.com/1085648 Reported-by: Harry Cutts <hcutts@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by: David Pedersen <limero1337@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This adds more hardware IDs for Elan touchpads found in various Lenovo laptops. Signed-off-by: Dave Wang <dave.wang@emc.com.tw> Link: https://lore.kernel.org/r/000201d5a8bd$9fead3f0$dfc07bd0$@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
…/git/dtor/input Pull input fixes from Dmitry Torokhov: "A few quirks for the Elan touchpad driver, another Thinkpad is being switched over from PS/2 to native RMI4 interface, and we gave a brand new SW_MACHINE_COVER switch definition" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add more hardware ID for Lenovo laptops Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list Revert "Input: elants_i2c - report resolution information for touch major" Input: elan_i2c - only increment wakeup count on touch Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen ARM: dts: n900: remove mmc1 card detect gpio Input: add `SW_MACHINE_COVER`
pull bot
pushed a commit
that referenced
this pull request
Aug 2, 2020
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pull bot
pushed a commit
that referenced
this pull request
Aug 5, 2020
The following deadlock was captured. The first process is holding 'kernfs_mutex' and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device, this pending bio list would be flushed by second process 'md127_raid1', but it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace sysfs_notify() can fix it. There were other sysfs_notify() invoked from io path, removed all of them. PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file" #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06 #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6 #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs] #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs] #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs] #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs] #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs] #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs] #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a #16 [ffffb87c4df37958] new_slab at ffffffff9a251430 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905 RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890 RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0 R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1" #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06 #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013 #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83 #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696 #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1] #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>
pull bot
pushed a commit
that referenced
this pull request
Aug 10, 2020
For early sections, its memmap is handled specially even sub-section is
enabled. The memmap could only be populated as a whole.
Quoted from the comment of section_activate():
* The early init code does not consider partially populated
* initial sections, it simply assumes that memory will never be
* referenced. If we hot-add memory into such a section then we
* do not need to populate the memmap and can simply reuse what
* is already there.
While current section_deactivate() breaks this rule. When hot-remove a
sub-section, section_deactivate() would depopulate its memmap. The
consequence is if we hot-add this subsection again, its memmap never get
proper populated.
We can reproduce the case by following steps:
1. Hacking qemu to allow sub-section early section
: diff --git a/hw/i386/pc.c b/hw/i386/pc.c
: index 51b3050d01..c6a78d83c0 100644
: --- a/hw/i386/pc.c
: +++ b/hw/i386/pc.c
: @@ -1010,7 +1010,7 @@ void pc_memory_init(PCMachineState *pcms,
: }
:
: machine->device_memory->base =
: - ROUND_UP(0x100000000ULL + x86ms->above_4g_mem_size, 1 * GiB);
: + 0x100000000ULL + x86ms->above_4g_mem_size;
:
: if (pcmc->enforce_aligned_dimm) {
: /* size device region assuming 1G page max alignment per slot */
2. Bootup qemu with PSE disabled and a sub-section aligned memory size
Part of the qemu command would look like this:
sudo x86_64-softmmu/qemu-system-x86_64 \
--enable-kvm -cpu host,pse=off \
-m 4160M,maxmem=20G,slots=1 \
-smp sockets=2,cores=16 \
-numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \
-machine pc,nvdimm \
-nographic \
-object memory-backend-ram,id=mem0,size=8G \
-device nvdimm,id=vm0,memdev=mem0,node=0,addr=0x144000000,label-size=128k
3. Re-config a pmem device with sub-section size in guest
ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax --size=16M
Then you would see the following call trace:
pmem0: detected capacity change from 0 to 16777216
BUG: unable to handle page fault for address: ffffec73c51000b4
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 81ff8067 P4D 81ff8067 PUD 81ff7067 PMD 1437cb067 PTE 0
Oops: 0002 [#1] SMP NOPTI
CPU: 16 PID: 1348 Comm: ndctl Kdump: loaded Tainted: G W 5.8.0-rc2+ #24
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.4
RIP: 0010:memmap_init_zone+0x154/0x1c2
Code: 77 16 f6 40 10 02 74 10 48 03 48 08 48 89 cb 48 c1 eb 0c e9 3a ff ff ff 48 89 df 48 c1 e7 06 48f
RSP: 0018:ffffbdc7011a39b0 EFLAGS: 00010282
RAX: ffffec73c5100088 RBX: 0000000000144002 RCX: 0000000000144000
RDX: 0000000000000004 RSI: 007ffe0000000000 RDI: ffffec73c5100080
RBP: 027ffe0000000000 R08: 0000000000000001 R09: ffff9f8d38f6d708
R10: ffffec73c0000000 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: 0000000000144200 R15: 0000000000000000
FS: 00007efe6b65d780(0000) GS:ffff9f8d3f780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffec73c51000b4 CR3: 000000007d718000 CR4: 0000000000340ee0
Call Trace:
move_pfn_range_to_zone+0x128/0x150
memremap_pages+0x4e4/0x5a0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0x69/0x160 [device_dax]
really_probe+0x298/0x3c0
driver_probe_device+0xe1/0x150
? driver_allows_async_probing+0x50/0x50
bus_for_each_drv+0x7e/0xc0
__device_attach+0xdf/0x160
bus_probe_device+0x8e/0xa0
device_add+0x3b9/0x740
__devm_create_dev_dax+0x127/0x1c0
__dax_pmem_probe+0x1f2/0x219 [dax_pmem_core]
dax_pmem_probe+0xc/0x1b [dax_pmem]
nvdimm_bus_probe+0x69/0x1c0 [libnvdimm]
really_probe+0x147/0x3c0
driver_probe_device+0xe1/0x150
device_driver_attach+0x53/0x60
bind_store+0xd1/0x110
kernfs_fop_write+0xce/0x1b0
vfs_write+0xb6/0x1a0
ksys_write+0x5f/0xe0
do_syscall_64+0x4d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: ba72b4c ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/20200625223534.18024-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pull bot
pushed a commit
that referenced
this pull request
Nov 17, 2020
This fix is for a failure that occurred in the DWARF unwind perf test.
Stack unwinders may probe memory when looking for frames.
Memory sanitizer will poison and track uninitialized memory on the
stack, and on the heap if the value is copied to the heap.
This can lead to false memory sanitizer failures for the use of an
uninitialized value.
Avoid this problem by removing the poison on the copied stack.
The full msan failure with track origins looks like:
==2168==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22
#1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13
#2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#24 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9
#1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#23 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10
#1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13
#2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18
#3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4
#4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7
#5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10
#6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17
#7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17
#8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14
#9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10
#10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8
#11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8
#12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#25 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was stored to memory at
#0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3
#1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2
#2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9
#3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6
#4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26
#5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0)
#6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2
#7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9
#8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9
#9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8
#10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9
#11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9
#12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4
#13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9
#14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11
#15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8
#16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2
#17 0x559cea95fbce in main tools/perf/perf.c:539:3
Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events'
#0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445
SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandeep Dasgupta <sdasgup@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201113182053.754625-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pull bot
pushed a commit
that referenced
this pull request
Dec 17, 2020
CHECK: Alignment should match open parenthesis #24: FILE: drivers/mfd/tps65910.c:296: + ret = regmap_clear_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_CK32K_CTRL_MASK); CHECK: Alignment should match open parenthesis #33: FILE: drivers/mfd/tps65910.c:318: + ret = regmap_set_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_DEV_SLP_MASK); CHECK: Alignment should match open parenthesis #42: FILE: drivers/mfd/tps65910.c:326: + ret = regmap_set_bits(tps65910->regmap, TPS65910_SLEEP_KEEP_RES_ON, CHECK: Alignment should match open parenthesis #51: FILE: drivers/mfd/tps65910.c:336: + ret = regmap_set_bits(tps65910->regmap, TPS65910_SLEEP_KEEP_RES_ON, CHECK: Alignment should match open parenthesis #60: FILE: drivers/mfd/tps65910.c:346: + ret = regmap_set_bits(tps65910->regmap, TPS65910_SLEEP_KEEP_RES_ON, CHECK: Alignment should match open parenthesis #69: FILE: drivers/mfd/tps65910.c:358: + regmap_clear_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_DEV_SLP_MASK); CHECK: Alignment should match open parenthesis #78: FILE: drivers/mfd/tps65910.c:440: + if (regmap_set_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_PWR_OFF_MASK) < 0) CHECK: Alignment should match open parenthesis #83: FILE: drivers/mfd/tps65910.c:444: + regmap_clear_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_DEV_ON_MASK); Signed-off-by: Lee Jones <lee.jones@linaro.org>
pull bot
pushed a commit
that referenced
this pull request
Dec 17, 2020
This patch cleared use_ack and use_map when dropping other suboptions to fix the following syzkaller BUG: [ 15.223006] BUG: unable to handle page fault for address: 0000000000223b10 [ 15.223700] #PF: supervisor read access in kernel mode [ 15.224209] #PF: error_code(0x0000) - not-present page [ 15.224724] PGD b8d5067 P4D b8d5067 PUD c0a5067 PMD 0 [ 15.225237] Oops: 0000 [#1] SMP [ 15.225556] CPU: 0 PID: 7747 Comm: syz-executor Not tainted 5.10.0-rc6+ #24 [ 15.226281] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 15.227292] RIP: 0010:skb_release_data+0x89/0x1e0 [ 15.227816] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34 [ 15.229669] RSP: 0018:ffffc900019c7c08 EFLAGS: 00010293 [ 15.230188] RAX: ffff88800daad900 RBX: 0000000000223b08 RCX: 0000000000000006 [ 15.230895] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6dc700 [ 15.231593] RBP: ffff88807f71a4c0 R08: 0000000000000001 R09: 0000000000000001 [ 15.232299] R10: ffffc900019c7c18 R11: 0000000000000000 R12: ffff88807f71a4f0 [ 15.233007] R13: 0000000000000000 R14: ffff88807f6dc700 R15: 0000000000000002 [ 15.233714] FS: 00007f65d9b5f700(0000) GS:ffff88807c400000(0000) knlGS:0000000000000000 [ 15.234509] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.235081] CR2: 0000000000223b10 CR3: 000000000b883000 CR4: 00000000000006f0 [ 15.235788] Call Trace: [ 15.236042] skb_release_all+0x28/0x30 [ 15.236419] __kfree_skb+0x11/0x20 [ 15.236768] tcp_data_queue+0x270/0x1240 [ 15.237161] ? tcp_urg+0x50/0x2a0 [ 15.237496] tcp_rcv_established+0x39a/0x890 [ 15.237997] ? mark_held_locks+0x49/0x70 [ 15.238467] tcp_v4_do_rcv+0xb9/0x270 [ 15.238915] __release_sock+0x8a/0x160 [ 15.239365] release_sock+0x32/0xd0 [ 15.239793] __inet_stream_connect+0x1d2/0x400 [ 15.240313] ? do_wait_intr_irq+0x80/0x80 [ 15.240791] inet_stream_connect+0x36/0x50 [ 15.241275] mptcp_stream_connect+0x69/0x1b0 [ 15.241787] __sys_connect+0x122/0x140 [ 15.242236] ? syscall_enter_from_user_mode+0x17/0x50 [ 15.242836] ? lockdep_hardirqs_on_prepare+0xd4/0x170 [ 15.243436] __x64_sys_connect+0x1a/0x20 [ 15.243924] do_syscall_64+0x33/0x40 [ 15.244313] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 15.244821] RIP: 0033:0x7f65d946e469 [ 15.245183] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 [ 15.247019] RSP: 002b:00007f65d9b5eda8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 15.247770] RAX: ffffffffffffffda RBX: 000000000049bf00 RCX: 00007f65d946e469 [ 15.248471] RDX: 0000000000000010 RSI: 00000000200000c0 RDI: 0000000000000005 [ 15.249205] RBP: 000000000049bf00 R08: 0000000000000000 R09: 0000000000000000 [ 15.249908] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049bf0c [ 15.250603] R13: 00007fffe8a25cef R14: 00007f65d9b3f000 R15: 0000000000000003 [ 15.251312] Modules linked in: [ 15.251626] CR2: 0000000000223b10 [ 15.251965] BUG: kernel NULL pointer dereference, address: 0000000000000048 [ 15.252005] ---[ end trace f5c51fe19123c773 ]--- [ 15.252822] #PF: supervisor read access in kernel mode [ 15.252823] #PF: error_code(0x0000) - not-present page [ 15.252825] PGD c6c6067 P4D c6c6067 PUD c0d8067 [ 15.253294] RIP: 0010:skb_release_data+0x89/0x1e0 [ 15.253910] PMD 0 [ 15.253914] Oops: 0000 [#2] SMP [ 15.253917] CPU: 1 PID: 7746 Comm: syz-executor Tainted: G D 5.10.0-rc6+ #24 [ 15.253920] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 15.254435] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34 [ 15.254899] RIP: 0010:skb_release_data+0x89/0x1e0 [ 15.254902] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34 [ 15.254905] RSP: 0018:ffffc900019bfc08 EFLAGS: 00010293 [ 15.255376] RSP: 0018:ffffc900019c7c08 EFLAGS: 00010293 [ 15.255580] [ 15.255583] RAX: ffff888004a7ac80 RBX: 0000000000000040 RCX: 0000000000000000 [ 15.255912] [ 15.256724] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6ddd00 [ 15.257620] RAX: ffff88800daad900 RBX: 0000000000223b08 RCX: 0000000000000006 [ 15.259817] RBP: ffff88800e9006c0 R08: 0000000000000000 R09: 0000000000000000 [ 15.259818] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88800e9006f0 [ 15.259820] R13: 0000000000000000 R14: ffff88807f6ddd00 R15: 0000000000000002 [ 15.259822] FS: 00007fae4a60a700(0000) GS:ffff88807c500000(0000) knlGS:0000000000000000 [ 15.259826] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.260296] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6dc700 [ 15.262514] CR2: 0000000000000048 CR3: 000000000b89c000 CR4: 00000000000006e0 [ 15.262515] Call Trace: [ 15.262519] skb_release_all+0x28/0x30 [ 15.262523] __kfree_skb+0x11/0x20 [ 15.263054] RBP: ffff88807f71a4c0 R08: 0000000000000001 R09: 0000000000000001 [ 15.263680] tcp_data_queue+0x270/0x1240 [ 15.263843] R10: ffffc900019c7c18 R11: 0000000000000000 R12: ffff88807f71a4f0 [ 15.264693] ? tcp_urg+0x50/0x2a0 [ 15.264856] R13: 0000000000000000 R14: ffff88807f6dc700 R15: 0000000000000002 [ 15.265720] tcp_rcv_established+0x39a/0x890 [ 15.266438] FS: 00007f65d9b5f700(0000) GS:ffff88807c400000(0000) knlGS:0000000000000000 [ 15.267283] ? __schedule+0x3fa/0x880 [ 15.267287] tcp_v4_do_rcv+0xb9/0x270 [ 15.267290] __release_sock+0x8a/0x160 [ 15.268049] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.268788] release_sock+0x32/0xd0 [ 15.268791] __inet_stream_connect+0x1d2/0x400 [ 15.268795] ? do_wait_intr_irq+0x80/0x80 [ 15.269593] CR2: 0000000000223b10 CR3: 000000000b883000 CR4: 00000000000006f0 [ 15.270246] inet_stream_connect+0x36/0x50 [ 15.270250] mptcp_stream_connect+0x69/0x1b0 [ 15.270253] __sys_connect+0x122/0x140 [ 15.271097] Kernel panic - not syncing: Fatal exception [ 15.271820] ? syscall_enter_from_user_mode+0x17/0x50 [ 15.283542] ? lockdep_hardirqs_on_prepare+0xd4/0x170 [ 15.284275] __x64_sys_connect+0x1a/0x20 [ 15.284853] do_syscall_64+0x33/0x40 [ 15.285369] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 15.286105] RIP: 0033:0x7fae49f19469 [ 15.286638] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 [ 15.289295] RSP: 002b:00007fae4a609da8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 15.290375] RAX: ffffffffffffffda RBX: 000000000049bf00 RCX: 00007fae49f19469 [ 15.291403] RDX: 0000000000000010 RSI: 00000000200000c0 RDI: 0000000000000005 [ 15.292437] RBP: 000000000049bf00 R08: 0000000000000000 R09: 0000000000000000 [ 15.293456] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049bf0c [ 15.294473] R13: 00007fff0004b6bf R14: 00007fae4a5ea000 R15: 0000000000000003 [ 15.295492] Modules linked in: [ 15.295944] CR2: 0000000000000048 [ 15.296567] Kernel Offset: disabled [ 15.296941] ---[ end Kernel panic - not syncing: Fatal exception ]--- Reported-by: Christoph Paasch <cpaasch@apple.com> Fixes: 84dfe36 (mptcp: send out dedicated ADD_ADDR packet) Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/ccca4e8f01457a1b495c5d612ed16c5f7a585706.1608010058.git.geliangtang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
Feb 23, 2021
Since de78a9c ("powerpc: Add a framework for Kernel Userspace Access Protection"), user access helpers call user_{read|write}_access_{begin|end} when user space access is allowed. Commit 890274c ("powerpc/64s: Implement KUAP for Radix MMU") made the mentioned helpers program a AMR special register to allow such access for a short period of time, most of the time AMR is expected to block user memory access by the kernel. Since the code accesses the user space memory, unsafe_get_user() calls might_fault() which calls arch_local_irq_restore() if either CONFIG_PROVE_LOCKING or CONFIG_DEBUG_ATOMIC_SLEEP is enabled. arch_local_irq_restore() then attempts to replay pending soft interrupts as KUAP regions have hardware interrupts enabled. If a pending interrupt happens to do user access (performance interrupts do that), it enables access for a short period of time so after returning from the replay, the user access state remains blocked and if a user page fault happens - "Bug: Read fault blocked by AMR!" appears and SIGSEGV is sent. An example trace: Bug: Read fault blocked by AMR! WARNING: CPU: 0 PID: 1603 at /home/aik/p/kernel/arch/powerpc/include/asm/book3s/64/kup-radix.h:145 CPU: 0 PID: 1603 Comm: amr Not tainted 5.10.0-rc6_v5.10-rc6_a+fstn1 #24 NIP: c00000000009ece8 LR: c00000000009ece4 CTR: 0000000000000000 REGS: c00000000dc63560 TRAP: 0700 Not tainted (5.10.0-rc6_v5.10-rc6_a+fstn1) MSR: 8000000000021033 <SF,ME,IR,DR,RI,LE> CR: 28002888 XER: 20040000 CFAR: c0000000001fa928 IRQMASK: 1 GPR00: c00000000009ece4 c00000000dc637f0 c000000002397600 000000000000001f GPR04: c0000000020eb318 0000000000000000 c00000000dc63494 0000000000000027 GPR08: c00000007fe4de68 c00000000dfe9180 0000000000000000 0000000000000001 GPR12: 0000000000002000 c0000000030a0000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 bfffffffffffffff GPR20: 0000000000000000 c0000000134a4020 c0000000019c2218 0000000000000fe0 GPR24: 0000000000000000 0000000000000000 c00000000d106200 0000000040000000 GPR28: 0000000000000000 0000000000000300 c00000000dc63910 c000000001946730 NIP __do_page_fault+0xb38/0xde0 LR __do_page_fault+0xb34/0xde0 Call Trace: __do_page_fault+0xb34/0xde0 (unreliable) handle_page_fault+0x10/0x2c --- interrupt: 300 at strncpy_from_user+0x290/0x440 LR = strncpy_from_user+0x284/0x440 strncpy_from_user+0x2f0/0x440 (unreliable) getname_flags+0x88/0x2c0 do_sys_openat2+0x2d4/0x5f0 do_sys_open+0xcc/0x140 system_call_exception+0x160/0x240 system_call_common+0xf0/0x27c To fix it save/restore the AMR when replaying interrupts, and also add a check if AMR was not blocked prior to replaying interrupts. Originally found by syzkaller. Fixes: 890274c ("powerpc/64s: Implement KUAP for Radix MMU") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Use normal commit citation format and add full oops log to change log, move kuap_check_amr() into the restore routine to avoid warnings about unreconciled IRQ state] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210202091541.36499-1-aik@ozlabs.ru
pull bot
pushed a commit
that referenced
this pull request
Apr 29, 2021
Clean up the code to use the "mmc" directly instead of "host->mmc".
If the code sits in hot code path, this clean up also brings trvial
performance improvement. Take the sdhci_post_req() for example:
before the patch:
...
8d0: a9be7bfd stp x29, x30, [sp, #-32]!
8d4: 910003fd mov x29, sp
8d8: f9000bf3 str x19, [sp, #16]
8dc: f9400833 ldr x19, [x1, #16]
8e0: b9404261 ldr w1, [x19, #64]
8e4: 34000161 cbz w1, 910 <sdhci_post_req+0x50>
8e8: f9424400 ldr x0, [x0, #1160]
8ec: d2800004 mov x4, #0x0 // #0
8f0: b9401a61 ldr w1, [x19, #24]
8f4: b9403262 ldr w2, [x19, #48]
8f8: f9400000 ldr x0, [x0]
8fc: f278003f tst x1, #0x100
900: f9401e61 ldr x1, [x19, #56]
904: 1a9f17e3 cset w3, eq // eq = none
908: 11000463 add w3, w3, #0x1
90c: 94000000 bl 0 <dma_unmap_sg_attrs>
...
After the patch:
...
8d0: a9be7bfd stp x29, x30, [sp, #-32]!
8d4: 910003fd mov x29, sp
8d8: f9000bf3 str x19, [sp, #16]
8dc: f9400833 ldr x19, [x1, #16]
8e0: b9404261 ldr w1, [x19, #64]
8e4: 34000141 cbz w1, 90c <sdhci_post_req+0x4c>
8e8: b9401a61 ldr w1, [x19, #24]
8ec: d2800004 mov x4, #0x0 // #0
8f0: b9403262 ldr w2, [x19, #48]
8f4: f9400000 ldr x0, [x0]
8f8: f278003f tst x1, #0x100
8fc: f9401e61 ldr x1, [x19, #56]
900: 1a9f17e3 cset w3, eq // eq = none
904: 11000463 add w3, w3, #0x1
908: 94000000 bl 0 <dma_unmap_sg_attrs>
...
We saved one ldr instruction: "ldr x0, [x0, #1160]"
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20210311174046.597d1951@xhacker.debian
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
pull bot
pushed a commit
that referenced
this pull request
Jul 3, 2021
The "auxtrace_info" and "auxtrace" functions are not set in "tool" member of
"annotate". As a result, perf annotate does not support parsing itrace data.
Before:
# perf record -e arm_spe_0/branch_filter=1/ -a sleep 1
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 20.874 MB perf.data ]
# perf annotate --stdio
Error:
The perf.data data has no samples!
Solution:
1. Add itrace options in help,
2. Set hook functions of "id_index", "auxtrace_info" and "auxtrace" in perf_tool.
After:
# perf record --all-user -e arm_spe_0/branch_filter=1/ ls
Couldn't synthesize bpf events.
perf.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.010 MB perf.data ]
# perf annotate --stdio
Percent | Source code & Disassembly of libc-2.28.so for branch-miss (1 samples, percent: local period)
------------------------------------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
: 0000000000066180 <__getdelim@@GLIBC_2.17>:
0.00 : 66180: stp x29, x30, [sp, #-96]!
0.00 : 66184: cmp x0, #0x0
0.00 : 66188: ccmp x1, #0x0, #0x4, ne // ne = any
0.00 : 6618c: mov x29, sp
0.00 : 66190: stp x24, x25, [sp, #56]
0.00 : 66194: stp x26, x27, [sp, #72]
0.00 : 66198: str x28, [sp, #88]
0.00 : 6619c: b.eq 66450 <__getdelim@@GLIBC_2.17+0x2d0> // b.none
0.00 : 661a0: stp x22, x23, [x29, #40]
0.00 : 661a4: mov x22, x1
0.00 : 661a8: ldr w1, [x3]
0.00 : 661ac: mov w23, w2
0.00 : 661b0: stp x20, x21, [x29, #24]
0.00 : 661b4: mov x20, x3
0.00 : 661b8: mov x21, x0
0.00 : 661bc: tbnz w1, #15, 66360 <__getdelim@@GLIBC_2.17+0x1e0>
0.00 : 661c0: ldr x0, [x3, #136]
0.00 : 661c4: ldr x2, [x0, #8]
0.00 : 661c8: str x19, [x29, #16]
0.00 : 661cc: mrs x19, tpidr_el0
0.00 : 661d0: sub x19, x19, #0x700
0.00 : 661d4: cmp x2, x19
0.00 : 661d8: b.eq 663f0 <__getdelim@@GLIBC_2.17+0x270> // b.none
0.00 : 661dc: mov w1, #0x1 // #1
0.00 : 661e0: ldaxr w2, [x0]
0.00 : 661e4: cmp w2, #0x0
0.00 : 661e8: b.ne 661f4 <__getdelim@@GLIBC_2.17+0x74> // b.any
0.00 : 661ec: stxr w3, w1, [x0]
0.00 : 661f0: cbnz w3, 661e0 <__getdelim@@GLIBC_2.17+0x60>
0.00 : 661f4: b.ne 66448 <__getdelim@@GLIBC_2.17+0x2c8> // b.any
0.00 : 661f8: ldr x0, [x20, #136]
0.00 : 661fc: ldr w1, [x20]
0.00 : 66200: ldr w2, [x0, #4]
0.00 : 66204: str x19, [x0, #8]
0.00 : 66208: add w2, w2, #0x1
0.00 : 6620c: str w2, [x0, #4]
0.00 : 66210: tbnz w1, #5, 66388 <__getdelim@@GLIBC_2.17+0x208>
0.00 : 66214: ldr x19, [x29, #16]
0.00 : 66218: ldr x0, [x21]
0.00 : 6621c: cbz x0, 66228 <__getdelim@@GLIBC_2.17+0xa8>
0.00 : 66220: ldr x0, [x22]
0.00 : 66224: cbnz x0, 6623c <__getdelim@@GLIBC_2.17+0xbc>
0.00 : 66228: mov x0, #0x78 // #120
0.00 : 6622c: str x0, [x22]
0.00 : 66230: bl 20710 <malloc@plt>
0.00 : 66234: str x0, [x21]
0.00 : 66238: cbz x0, 66428 <__getdelim@@GLIBC_2.17+0x2a8>
0.00 : 6623c: ldr x27, [x20, #8]
0.00 : 66240: str x19, [x29, #16]
0.00 : 66244: ldr x19, [x20, #16]
0.00 : 66248: sub x19, x19, x27
0.00 : 6624c: cmp x19, #0x0
0.00 : 66250: b.le 66398 <__getdelim@@GLIBC_2.17+0x218>
0.00 : 66254: mov x25, #0x0 // #0
0.00 : 66258: b 662d8 <__getdelim@@GLIBC_2.17+0x158>
0.00 : 6625c: nop
0.00 : 66260: add x24, x19, x25
0.00 : 66264: ldr x3, [x22]
0.00 : 66268: add x26, x24, #0x1
0.00 : 6626c: ldr x0, [x21]
0.00 : 66270: cmp x3, x26
0.00 : 66274: b.cs 6629c <__getdelim@@GLIBC_2.17+0x11c> // b.hs, b.nlast
0.00 : 66278: lsl x3, x3, #1
0.00 : 6627c: cmp x3, x26
0.00 : 66280: csel x26, x3, x26, cs // cs = hs, nlast
0.00 : 66284: mov x1, x26
0.00 : 66288: bl 206f0 <realloc@plt>
0.00 : 6628c: cbz x0, 66438 <__getdelim@@GLIBC_2.17+0x2b8>
0.00 : 66290: str x0, [x21]
0.00 : 66294: ldr x27, [x20, #8]
0.00 : 66298: str x26, [x22]
0.00 : 6629c: mov x2, x19
0.00 : 662a0: mov x1, x27
0.00 : 662a4: add x0, x0, x25
0.00 : 662a8: bl 87390 <explicit_bzero@@GLIBC_2.25+0x50>
0.00 : 662ac: ldr x0, [x20, #8]
0.00 : 662b0: add x19, x0, x19
0.00 : 662b4: str x19, [x20, #8]
0.00 : 662b8: cbnz x28, 66410 <__getdelim@@GLIBC_2.17+0x290>
0.00 : 662bc: mov x0, x20
0.00 : 662c0: bl 73b80 <__underflow@@GLIBC_2.17>
0.00 : 662c4: cmn w0, #0x1
0.00 : 662c8: b.eq 66410 <__getdelim@@GLIBC_2.17+0x290> // b.none
0.00 : 662cc: ldp x27, x19, [x20, #8]
0.00 : 662d0: mov x25, x24
0.00 : 662d4: sub x19, x19, x27
0.00 : 662d8: mov x2, x19
0.00 : 662dc: mov w1, w23
0.00 : 662e0: mov x0, x27
0.00 : 662e4: bl 807b0 <memchr@@GLIBC_2.17>
0.00 : 662e8: cmp x0, #0x0
0.00 : 662ec: mov x28, x0
0.00 : 662f0: sub x0, x0, x27
0.00 : 662f4: csinc x19, x19, x0, eq // eq = none
0.00 : 662f8: mov x0, #0x7fffffffffffffff // #9223372036854775807
0.00 : 662fc: sub x0, x0, x25
0.00 : 66300: cmp x19, x0
0.00 : 66304: b.lt 66260 <__getdelim@@GLIBC_2.17+0xe0> // b.tstop
0.00 : 66308: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320>
0.00 : 6630c: ldr x0, [x0, #3624]
0.00 : 66310: mrs x2, tpidr_el0
0.00 : 66314: ldr x19, [x29, #16]
0.00 : 66318: mov w3, #0x4b // #75
0.00 : 6631c: ldr w1, [x20]
0.00 : 66320: mov x24, #0xffffffffffffffff // #-1
0.00 : 66324: str w3, [x2, x0]
0.00 : 66328: tbnz w1, #15, 66340 <__getdelim@@GLIBC_2.17+0x1c0>
0.00 : 6632c: ldr x0, [x20, #136]
0.00 : 66330: ldr w1, [x0, #4]
0.00 : 66334: sub w1, w1, #0x1
0.00 : 66338: str w1, [x0, #4]
0.00 : 6633c: cbz w1, 663b8 <__getdelim@@GLIBC_2.17+0x238>
0.00 : 66340: mov x0, x24
0.00 : 66344: ldr x28, [sp, #88]
0.00 : 66348: ldp x20, x21, [x29, #24]
0.00 : 6634c: ldp x22, x23, [x29, #40]
0.00 : 66350: ldp x24, x25, [sp, #56]
0.00 : 66354: ldp x26, x27, [sp, #72]
0.00 : 66358: ldp x29, x30, [sp], #96
0.00 : 6635c: ret
100.00 : 66360: tbz w1, #5, 66218 <__getdelim@@GLIBC_2.17+0x98>
0.00 : 66364: ldp x20, x21, [x29, #24]
0.00 : 66368: mov x24, #0xffffffffffffffff // #-1
0.00 : 6636c: ldp x22, x23, [x29, #40]
0.00 : 66370: mov x0, x24
0.00 : 66374: ldp x24, x25, [sp, #56]
0.00 : 66378: ldp x26, x27, [sp, #72]
0.00 : 6637c: ldr x28, [sp, #88]
0.00 : 66380: ldp x29, x30, [sp], #96
0.00 : 66384: ret
0.00 : 66388: mov x24, #0xffffffffffffffff // #-1
0.00 : 6638c: ldr x19, [x29, #16]
0.00 : 66390: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66394: nop
0.00 : 66398: mov x0, x20
0.00 : 6639c: bl 73b80 <__underflow@@GLIBC_2.17>
0.00 : 663a0: cmn w0, #0x1
0.00 : 663a4: b.eq 66438 <__getdelim@@GLIBC_2.17+0x2b8> // b.none
0.00 : 663a8: ldp x27, x19, [x20, #8]
0.00 : 663ac: sub x19, x19, x27
0.00 : 663b0: b 66254 <__getdelim@@GLIBC_2.17+0xd4>
0.00 : 663b4: nop
0.00 : 663b8: str xzr, [x0, #8]
0.00 : 663bc: ldxr w2, [x0]
0.00 : 663c0: stlxr w3, w1, [x0]
0.00 : 663c4: cbnz w3, 663bc <__getdelim@@GLIBC_2.17+0x23c>
0.00 : 663c8: cmp w2, #0x1
0.00 : 663cc: b.le 66340 <__getdelim@@GLIBC_2.17+0x1c0>
0.00 : 663d0: mov x1, #0x81 // #129
0.00 : 663d4: mov x2, #0x1 // #1
0.00 : 663d8: mov x3, #0x0 // #0
0.00 : 663dc: mov x8, #0x62 // #98
0.00 : 663e0: svc #0x0
0.00 : 663e4: ldp x20, x21, [x29, #24]
0.00 : 663e8: ldp x22, x23, [x29, #40]
0.00 : 663ec: b 66370 <__getdelim@@GLIBC_2.17+0x1f0>
0.00 : 663f0: ldr w2, [x0, #4]
0.00 : 663f4: add w2, w2, #0x1
0.00 : 663f8: str w2, [x0, #4]
0.00 : 663fc: tbz w1, #5, 66214 <__getdelim@@GLIBC_2.17+0x94>
0.00 : 66400: mov x24, #0xffffffffffffffff // #-1
0.00 : 66404: ldr x19, [x29, #16]
0.00 : 66408: b 66330 <__getdelim@@GLIBC_2.17+0x1b0>
0.00 : 6640c: nop
0.00 : 66410: ldr x0, [x21]
0.00 : 66414: strb wzr, [x0, x24]
0.00 : 66418: ldr w1, [x20]
0.00 : 6641c: ldr x19, [x29, #16]
0.00 : 66420: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66424: nop
0.00 : 66428: mov x24, #0xffffffffffffffff // #-1
0.00 : 6642c: ldr w1, [x20]
0.00 : 66430: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66434: nop
0.00 : 66438: mov x24, #0xffffffffffffffff // #-1
0.00 : 6643c: ldr w1, [x20]
0.00 : 66440: ldr x19, [x29, #16]
0.00 : 66444: b 66328 <__getdelim@@GLIBC_2.17+0x1a8>
0.00 : 66448: bl e3ba0 <pthread_setcanceltype@@GLIBC_2.17+0x30>
0.00 : 6644c: b 661f8 <__getdelim@@GLIBC_2.17+0x78>
0.00 : 66450: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320>
0.00 : 66454: ldr x0, [x0, #3624]
0.00 : 66458: mrs x1, tpidr_el0
0.00 : 6645c: mov w2, #0x16 // #22
0.00 : 66460: mov x24, #0xffffffffffffffff // #-1
0.00 : 66464: str w2, [x1, x0]
0.00 : 66468: b 66370 <__getdelim@@GLIBC_2.17+0x1f0>
0.00 : 6646c: ldr w1, [x20]
0.00 : 66470: mov x4, x0
0.00 : 66474: tbnz w1, #15, 6648c <__getdelim@@GLIBC_2.17+0x30c>
0.00 : 66478: ldr x0, [x20, #136]
0.00 : 6647c: ldr w1, [x0, #4]
0.00 : 66480: sub w1, w1, #0x1
0.00 : 66484: str w1, [x0, #4]
0.00 : 66488: cbz w1, 66494 <__getdelim@@GLIBC_2.17+0x314>
0.00 : 6648c: mov x0, x4
0.00 : 66490: bl 20e40 <gnu_get_libc_version@@GLIBC_2.17+0x130>
0.00 : 66494: str xzr, [x0, #8]
0.00 : 66498: ldxr w2, [x0]
0.00 : 6649c: stlxr w3, w1, [x0]
0.00 : 664a0: cbnz w3, 66498 <__getdelim@@GLIBC_2.17+0x318>
0.00 : 664a4: cmp w2, #0x1
0.00 : 664a8: b.le 6648c <__getdelim@@GLIBC_2.17+0x30c>
0.00 : 664ac: mov x1, #0x81 // #129
0.00 : 664b0: mov x2, #0x1 // #1
0.00 : 664b4: mov x3, #0x0 // #0
0.00 : 664b8: mov x8, #0x62 // #98
0.00 : 664bc: svc #0x0
0.00 : 664c0: b 6648c <__getdelim@@GLIBC_2.17+0x30c>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210615091704.259202-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pull bot
pushed a commit
that referenced
this pull request
Jul 5, 2021
When setting up a read or write to the OPB memory space, we must perform
five or six AHB writes. The ordering of these up until the trigger write
does not matter, so use writel_relaxed.
The generated code goes from (Debian GCC 10.2.1-6):
mov r8, r3
mcr 15, 0, sl, cr7, cr10, {4}
str sl, [r6, #20]
mcr 15, 0, sl, cr7, cr10, {4}
str r3, [r6, #24]
mcr 15, 0, sl, cr7, cr10, {4}
str r1, [r6, #28]
mcr 15, 0, sl, cr7, cr10, {4}
str r2, [r6, #32]
mcr 15, 0, sl, cr7, cr10, {4}
mov r1, #1
str r1, [r6, #64] ; 0x40
mcr 15, 0, sl, cr7, cr10, {4}
str r1, [r6, #4]
to this:
str r3, [r7, #20]
str r2, [r7, #24]
str r1, [r7, #28]
str r3, [r7, #64]
mov r8, #0
mcr 15, 0, r8, cr7, cr10, {4}
str r3, [r7, #4]
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210223041737.171274-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
pull bot
pushed a commit
that referenced
this pull request
Feb 24, 2022
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.
[ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called
[ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called
...
[ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
crash> bt
...
PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd"
...
#9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
[exception RIP: dma_pool_alloc+0x1ab]
RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046
RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090
RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00
R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0
R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
#11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
#12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
#13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
#14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
#15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
#16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
#17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
#18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
#19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
#20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
#21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
#22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
#23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
#24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
#25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
#26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92
crash> net_device.state ffff89443b0c0000
state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER)
To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pull bot
pushed a commit
that referenced
this pull request
May 24, 2022
The rcutorture module is used to run torture tests that validate RCU. rcutorture takes a variety of module parameters that configure the functionality of the test. Amongst these parameters are the types of synchronization mechanisms that the rcu_torture_writer and rcu_torture_fakewriter tasks may use, and the torture_type of the run which determines what read and sync operations are used by the various writer and reader tasks that run throughout the test. When the module is configured to only use sync types for which the specified torture_type does not implement the necessary operations, we can end up in a state where nsynctypes is 0. This is not an erroneous state, but it currently crashes the kernel with a #DE due to nsynctypes being used with a modulo operator in rcu_torture_fakewriter(). Here is an example of such a #DE: $ insmod ./rcutorture.ko gp_cond=1 gp_cond_exp=0 gp_exp=0 gp_poll_exp=0 gp_normal=0 gp_poll=0 gp_poll_exp=0 verbose=9999 torture_type=trivial ... [ 8536.525096] divide error: 0000 [#1] PREEMPT SMP PTI [ 8536.525101] CPU: 30 PID: 392138 Comm: rcu_torture_fak Kdump: loaded Tainted: G S 5.17.0-rc1-00179-gc8c42c80febd #24 [ 8536.525105] Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020 [ 8536.525106] RIP: 0010:rcu_torture_fakewriter+0xf1/0x2d0 [rcutorture] [ 8536.525121] Code: 00 31 d2 8d 0c f5 00 00 00 00 48 63 c9 48 f7 f1 48 85 d2 0f 84 79 ff ff ff 48 89 e7 e8 78 78 01 00 48 63 0d 29 ca 00 00 31 d2 <48> f7 f1 8b 04 95 00 05 4e a0 83 f8 06 0f 84 ad 00 00 00 7f 1f 83 [ 8536.525124] RSP: 0018:ffffc9000777fef0 EFLAGS: 00010246 [ 8536.525127] RAX: 00000000223d006e RBX: cccccccccccccccd RCX: 0000000000000000 [ 8536.525130] RDX: 0000000000000000 RSI: ffffffff824315b9 RDI: ffffc9000777fef0 [ 8536.525132] RBP: ffffc9000487bb30 R08: 0000000000000002 R09: 000000000002a580 [ 8536.525134] R10: ffffffff82c5f920 R11: 0000000000000000 R12: ffff8881a2c35d00 [ 8536.525136] R13: ffff8881540c8d00 R14: ffffffffa04d39d0 R15: 0000000000000000 [ 8536.525137] FS: 0000000000000000(0000) GS:ffff88903ff80000(0000) knlGS:0000000000000000 [ 8536.525140] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8536.525142] CR2: 00007f839f022000 CR3: 0000000002c0a006 CR4: 00000000007706e0 [ 8536.525144] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8536.525145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8536.525147] PKRU: 55555554 [ 8536.525148] Call Trace: [ 8536.525150] <TASK> [ 8536.525153] kthread+0xe8/0x110 [ 8536.525161] ? kthread_complete_and_exit+0x20/0x20 [ 8536.525167] ret_from_fork+0x22/0x30 [ 8536.525174] </TASK> The solution is to gracefully handle the case of nsynctypes being 0 in rcu_torture_fakewriter() by not performing any work. This is already being done in rcu_torture_writer(), though there is a missing return on that path which will be fixed in a subsequent patch. Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
Aug 19, 2022
During stress test with attaching and detaching VF from KVM and simultaneously changing VFs spoofcheck and trust there was a call trace in ice_reset_vf that VF's VSI is null. [145237.352797] WARNING: CPU: 46 PID: 840629 at drivers/net/ethernet/intel/ice/ice_vf_lib.c:508 ice_reset_vf+0x3d6/0x410 [ice] [145237.352851] Modules linked in: ice(E) vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio iavf dm_mod xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTC O_vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl ipmi_si intel_cstate ipmi_devintf joydev intel_uncore m ei_me ipmi_msghandler i2c_i801 pcspkr mei lpc_ich ioatdma i2c_smbus acpi_pad acpi_power_meter ip_tables xfs libcrc32c i2c_algo_bit drm_sh mem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft syscopyarea crc64 sysfillrect sg sysimgblt fb_sys_fops drm i40e ixgbe ahci libahci libata crc32c_intel mdio dca wmi fuse [last unloaded: ice] [145237.352917] CPU: 46 PID: 840629 Comm: kworker/46:2 Tainted: G S W I E 5.19.0-rc6+ #24 [145237.352921] Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015 [145237.352923] Workqueue: ice ice_service_task [ice] [145237.352948] RIP: 0010:ice_reset_vf+0x3d6/0x410 [ice] [145237.352984] Code: 30 ec f3 cc e9 28 fd ff ff 0f b7 4b 50 48 c7 c2 48 19 9c c0 4c 89 ee 48 c7 c7 30 fe 9e c0 e8 d1 21 9d cc 31 c0 e9 a 9 fe ff ff <0f> 0b b8 ea ff ff ff e9 c1 fc ff ff 0f 0b b8 fb ff ff ff e9 91 fe [145237.352987] RSP: 0018:ffffb453e257fdb8 EFLAGS: 00010246 [145237.352990] RAX: ffff8bd0040181c0 RBX: ffff8be68db8f800 RCX: 0000000000000000 [145237.352991] RDX: 000000000000ffff RSI: 0000000000000000 RDI: ffff8be68db8f800 [145237.352993] RBP: ffff8bd0040181c0 R08: 0000000000001000 R09: ffff8bcfd520e000 [145237.352995] R10: 0000000000000000 R11: 00008417b5ab0bc0 R12: 0000000000000005 [145237.352996] R13: ffff8bcee061c0d0 R14: ffff8bd004019640 R15: 0000000000000000 [145237.352998] FS: 0000000000000000(0000) GS:ffff8be5dfb00000(0000) knlGS:0000000000000000 [145237.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [145237.353002] CR2: 00007fd81f651d68 CR3: 0000001a0fe10001 CR4: 00000000001726e0 [145237.353003] Call Trace: [145237.353008] <TASK> [145237.353011] ice_process_vflr_event+0x8d/0xb0 [ice] [145237.353049] ice_service_task+0x79f/0xef0 [ice] [145237.353074] process_one_work+0x1c8/0x390 [145237.353081] ? process_one_work+0x390/0x390 [145237.353084] worker_thread+0x30/0x360 [145237.353087] ? process_one_work+0x390/0x390 [145237.353090] kthread+0xe8/0x110 [145237.353094] ? kthread_complete_and_exit+0x20/0x20 [145237.353097] ret_from_fork+0x22/0x30 [145237.353103] </TASK> Remove WARN_ON() from check if VSI is null in ice_reset_vf. Add "VF is already removed\n" in dev_dbg(). This WARN_ON() is unnecessary and causes call trace, despite that call trace, driver still works. There is no need for this warn because this piece of code is responsible for disabling VF's Tx/Rx queues when VF is disabled, but when VF is already removed there is no need to do reset or disable queues. Fixes: efe4186 ("ice: Fix memory corruption in VF driver") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
pull bot
pushed a commit
that referenced
this pull request
Aug 26, 2022
When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0 CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2d151d3 ("xfrm: Add possibility to set the default to block if we have no policy") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
pull bot
pushed a commit
that referenced
this pull request
Jun 2, 2023
The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
pull bot
pushed a commit
that referenced
this pull request
Sep 16, 2023
The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pull bot
pushed a commit
that referenced
this pull request
May 2, 2024
The current implementation of the mov instruction with sign extension has the
following problems:
1. It clobbers the source register if it is not stacked because it
sign extends the source and then moves it to the destination.
2. If the dst_reg is stacked, the current code doesn't write the value
back in case of 64-bit mov.
3. There is room for improvement by emitting fewer instructions.
The steps for fixing this and the instructions emitted by the JIT are explained
below with examples in all combinations:
Case A: offset == 32:
=====================
Case A.1: src and dst are stacked registers:
--------------------------------------------
1. Load src_lo into tmp_lo
2. Store tmp_lo into dst_lo
3. Sign extend tmp_lo into tmp_hi
4. Store tmp_hi to dst_hi
Example: r3 = (s32)r3
r3 is a stacked register
ldr r6, [r11, #-16] // Load r3_lo into tmp_lo
// str to dst_lo is not emitted because src_lo == dst_lo
asr r7, r6, #31 // Sign extend tmp_lo into tmp_hi
str r7, [r11, #-12] // Store tmp_hi into r3_hi
Case A.2: src is stacked but dst is not:
----------------------------------------
1. Load src_lo into dst_lo
2. Sign extend dst_lo into dst_hi
Example: r6 = (s32)r3
r6 maps to {ARM_R5, ARM_R4} and r3 is stacked
ldr r4, [r11, #-16] // Load r3_lo into r6_lo
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case A.3: src is not stacked but dst is stacked:
------------------------------------------------
1. Store src_lo into dst_lo
2. Sign extend src_lo into tmp_hi
3. Store tmp_hi to dst_hi
Example: r3 = (s32)r6
r3 is stacked and r6 maps to {ARM_R5, ARM_R4}
str r4, [r11, #-16] // Store r6_lo to r3_lo
asr r7, r4, #31 // Sign extend r6_lo into tmp_hi
str r7, [r11, #-12] // Store tmp_hi to dest_hi
Case A.4: Both src and dst are not stacked:
-------------------------------------------
1. Mov src_lo into dst_lo
2. Sign extend src_lo into dst_hi
Example: (bf) r6 = (s32)r6
r6 maps to {ARM_R5, ARM_R4}
// Mov not emitted because dst == src
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case B: offset != 32:
=====================
Case B.1: src and dst are stacked registers:
--------------------------------------------
1. Load src_lo into tmp_lo
2. Sign extend tmp_lo according to offset.
3. Store tmp_lo into dst_lo
4. Sign extend tmp_lo into tmp_hi
5. Store tmp_hi to dst_hi
Example: r9 = (s8)r3
r9 and r3 are both stacked registers
ldr r6, [r11, #-16] // Load r3_lo into tmp_lo
lsl r6, r6, #24 // Sign extend tmp_lo
asr r6, r6, #24 // ..
str r6, [r11, #-56] // Store tmp_lo to r9_lo
asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi
str r7, [r11, #-52] // Store tmp_hi to r9_hi
Case B.2: src is stacked but dst is not:
----------------------------------------
1. Load src_lo into dst_lo
2. Sign extend dst_lo according to offset.
3. Sign extend tmp_lo into dst_hi
Example: r6 = (s8)r3
r6 maps to {ARM_R5, ARM_R4} and r3 is stacked
ldr r4, [r11, #-16] // Load r3_lo to r6_lo
lsl r4, r4, #24 // Sign extend r6_lo
asr r4, r4, #24 // ..
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case B.3: src is not stacked but dst is stacked:
------------------------------------------------
1. Sign extend src_lo into tmp_lo according to offset.
2. Store tmp_lo into dst_lo.
3. Sign extend src_lo into tmp_hi.
4. Store tmp_hi to dst_hi.
Example: r3 = (s8)r1
r3 is stacked and r1 maps to {ARM_R3, ARM_R2}
lsl r6, r2, #24 // Sign extend r1_lo to tmp_lo
asr r6, r6, #24 // ..
str r6, [r11, #-16] // Store tmp_lo to r3_lo
asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi
str r7, [r11, #-12] // Store tmp_hi to r3_hi
Case B.4: Both src and dst are not stacked:
-------------------------------------------
1. Sign extend src_lo into dst_lo according to offset.
2. Sign extend dst_lo into dst_hi.
Example: r6 = (s8)r1
r6 maps to {ARM_R5, ARM_R4} and r1 maps to {ARM_R3, ARM_R2}
lsl r4, r2, #24 // Sign extend r1_lo to r6_lo
asr r4, r4, #24 // ..
asr r5, r4, #31 // Sign extend r6_lo to r6_hi
Fixes: fc83265 ("arm32, bpf: add support for sign-extension mov instruction")
Reported-by: syzbot+186522670e6722692d86@syzkaller.appspotmail.com
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Closes: https://lore.kernel.org/all/000000000000e9a8d80615163f2a@google.com
Link: https://lore.kernel.org/bpf/20240419182832.27707-1-puranjay@kernel.org
pull bot
pushed a commit
that referenced
this pull request
Jul 16, 2024
Historically, arm64 implemented raw_smp_processor_id() as a read of current_thread_info()->cpu. This changed when arm64 moved thread_info into task struct, as at the time CONFIG_THREAD_INFO_IN_TASK made core code use thread_struct::cpu for the cpu number, and due to header dependencies prevented using this in raw_smp_processor_id(). As a workaround, we moved to using a percpu variable in commit: 57c8295 ("arm64: make cpu number a percpu variable") Since then, thread_info::cpu was reintroduced, and core code was made to use this in commits: 001430c ("arm64: add CPU field to struct thread_info") bcf9033 ("sched: move CPU field back into thread_info if THREAD_INFO_IN_TASK=y") Consequently it is possible to use current_thread_info()->cpu again. This decreases the number of emitted instructions like in the following example: Dump of assembler code for function bpf_get_smp_processor_id: 0xffff8000802cd608 <+0>: nop 0xffff8000802cd60c <+4>: nop 0xffff8000802cd610 <+8>: adrp x0, 0xffff800082138000 0xffff8000802cd614 <+12>: mrs x1, tpidr_el1 0xffff8000802cd618 <+16>: add x0, x0, #0x8 0xffff8000802cd61c <+20>: ldrsw x0, [x0, x1] 0xffff8000802cd620 <+24>: ret After this patch: Dump of assembler code for function bpf_get_smp_processor_id: 0xffff8000802c9130 <+0>: nop 0xffff8000802c9134 <+4>: nop 0xffff8000802c9138 <+8>: mrs x0, sp_el0 0xffff8000802c913c <+12>: ldr w0, [x0, #24] 0xffff8000802c9140 <+16>: ret A microbenchmark[1] was built to measure the performance improvement provided by this change. It calls the following function given number of times and finds the runtime overhead: static noinline int get_cpu_id(void) { return smp_processor_id(); } Run the benchmark like: modprobe smp_processor_id nr_function_calls=1000000000 +--------------------------+------------------------+ | | Number of Calls | Time taken | +--------+-----------------+------------------------+ | Before | 1000000000 | 1602888401ns | +--------+-----------------+------------------------+ | After | 1000000000 | 1206212658ns | +--------+-----------------+------------------------+ | Difference (decrease) | 396675743ns (24.74%) | +---------------------------------------------------+ Remove the percpu variable cpu_number as it is used only in set_smp_ipi_range() as a dummy variable to be passed to ipi_handler(). Use irq_stat in place of cpu_number here like arm32. [1] puranjaymohan/linux@77d3fdd Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20240503171847.68267-2-puranjay@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
pull bot
pushed a commit
that referenced
this pull request
Jul 28, 2024
profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: <TASK> ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Signed-off-by: Leesoo Ahn <lsahn@ooseel.net> Signed-off-by: John Johansen <john.johansen@canonical.com>
pull bot
pushed a commit
that referenced
this pull request
Nov 17, 2024
scx_ops_bypass() can currently race on the ops enable / disable path as follows: 1. scx_ops_bypass(true) called on enable path, bypass depth is set to 1 2. An op on the init path exits, which schedules scx_ops_disable_workfn() 3. scx_ops_bypass(false) is called on the disable path, and bypass depth is decremented to 0 4. kthread is scheduled to execute scx_ops_disable_workfn() 5. scx_ops_bypass(true) called, bypass depth set to 1 6. scx_ops_bypass() races when iterating over CPUs While it's not safe to take any blocking locks on the bypass path, it is safe to take a raw spinlock which cannot be preempted. This patch therefore updates scx_ops_bypass() to use a raw spinlock to synchronize, and changes scx_ops_bypass_depth to be a regular int. Without this change, we observe the following warnings when running the 'exit' sched_ext selftest (sometimes requires a couple of runs): .[root@virtme-ng sched_ext]# ./runner -t exit ===== START ===== TEST: exit ... [ 14.935078] WARNING: CPU: 2 PID: 360 at kernel/sched/ext.c:4332 scx_ops_bypass+0x1ca/0x280 [ 14.935126] Modules linked in: [ 14.935150] CPU: 2 UID: 0 PID: 360 Comm: sched_ext_ops_h Not tainted 6.11.0-virtme #24 [ 14.935192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 14.935242] Sched_ext: exit (enabling+all) [ 14.935244] RIP: 0010:scx_ops_bypass+0x1ca/0x280 [ 14.935300] Code: ff ff ff e8 48 96 10 00 fb e9 08 ff ff ff c6 05 7b 34 e8 01 01 90 48 c7 c7 89 86 88 87 e8 be 1d f8 ff 90 0f 0b 90 90 eb 95 90 <0f> 0b 90 41 8b 84 24 24 0a 00 00 eb 97 90 0f 0b 90 41 8b 84 24 24 [ 14.935394] RSP: 0018:ffffb706c0957ce0 EFLAGS: 00010002 [ 14.935424] RAX: 0000000000000009 RBX: 0000000000000001 RCX: 00000000e3fb8b2a [ 14.935465] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffffff88a4c080 [ 14.935512] RBP: 0000000000009b56 R08: 0000000000000004 R09: 00000003f12e520a [ 14.935555] R10: ffffffff863a9795 R11: 0000000000000000 R12: ffff8fc5fec31300 [ 14.935598] R13: ffff8fc5fec31318 R14: 0000000000000286 R15: 0000000000000018 [ 14.935642] FS: 0000000000000000(0000) GS:ffff8fc5fe680000(0000) knlGS:0000000000000000 [ 14.935684] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.935721] CR2: 0000557d92890b88 CR3: 000000002464a000 CR4: 0000000000750ef0 [ 14.935765] PKRU: 55555554 [ 14.935782] Call Trace: [ 14.935802] <TASK> [ 14.935823] ? __warn+0xce/0x220 [ 14.935850] ? scx_ops_bypass+0x1ca/0x280 [ 14.935881] ? report_bug+0xc1/0x160 [ 14.935909] ? handle_bug+0x61/0x90 [ 14.935934] ? exc_invalid_op+0x1a/0x50 [ 14.935959] ? asm_exc_invalid_op+0x1a/0x20 [ 14.935984] ? raw_spin_rq_lock_nested+0x15/0x30 [ 14.936019] ? scx_ops_bypass+0x1ca/0x280 [ 14.936046] ? srso_alias_return_thunk+0x5/0xfbef5 [ 14.936081] ? __pfx_scx_ops_disable_workfn+0x10/0x10 [ 14.936111] scx_ops_disable_workfn+0x146/0xac0 [ 14.936142] ? finish_task_switch+0xa9/0x2c0 [ 14.936172] ? srso_alias_return_thunk+0x5/0xfbef5 [ 14.936211] ? __pfx_scx_ops_disable_workfn+0x10/0x10 [ 14.936244] kthread_worker_fn+0x101/0x2c0 [ 14.936268] ? __pfx_kthread_worker_fn+0x10/0x10 [ 14.936299] kthread+0xec/0x110 [ 14.936327] ? __pfx_kthread+0x10/0x10 [ 14.936351] ret_from_fork+0x37/0x50 [ 14.936374] ? __pfx_kthread+0x10/0x10 [ 14.936400] ret_from_fork_asm+0x1a/0x30 [ 14.936427] </TASK> [ 14.936443] irq event stamp: 21002 [ 14.936467] hardirqs last enabled at (21001): [<ffffffff863aa35f>] resched_cpu+0x9f/0xd0 [ 14.936521] hardirqs last disabled at (21002): [<ffffffff863dd0ba>] scx_ops_bypass+0x11a/0x280 [ 14.936571] softirqs last enabled at (20642): [<ffffffff863683d7>] __irq_exit_rcu+0x67/0xd0 [ 14.936622] softirqs last disabled at (20637): [<ffffffff863683d7>] __irq_exit_rcu+0x67/0xd0 [ 14.936672] ---[ end trace 0000000000000000 ]--- [ 14.953282] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) [ 14.953352] ------------[ cut here ]------------ [ 14.953383] WARNING: CPU: 2 PID: 360 at kernel/sched/ext.c:4335 scx_ops_bypass+0x1d8/0x280 [ 14.953428] Modules linked in: [ 14.953453] CPU: 2 UID: 0 PID: 360 Comm: sched_ext_ops_h Tainted: G W 6.11.0-virtme #24 [ 14.953505] Tainted: [W]=WARN [ 14.953527] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 14.953574] RIP: 0010:scx_ops_bypass+0x1d8/0x280 [ 14.953603] Code: c6 05 7b 34 e8 01 01 90 48 c7 c7 89 86 88 87 e8 be 1d f8 ff 90 0f 0b 90 90 eb 95 90 0f 0b 90 41 8b 84 24 24 0a 00 00 eb 97 90 <0f> 0b 90 41 8b 84 24 24 0a 00 00 eb 92 f3 0f 1e fa 49 8d 84 24 f0 [ 14.953693] RSP: 0018:ffffb706c0957ce0 EFLAGS: 00010046 [ 14.953722] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000001 [ 14.953763] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8fc5fec31318 [ 14.953804] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 14.953845] R10: ffffffff863a9795 R11: 0000000000000000 R12: ffff8fc5fec31300 [ 14.953888] R13: ffff8fc5fec31318 R14: 0000000000000286 R15: 0000000000000018 [ 14.953934] FS: 0000000000000000(0000) GS:ffff8fc5fe680000(0000) knlGS:0000000000000000 [ 14.953974] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.954009] CR2: 0000557d92890b88 CR3: 000000002464a000 CR4: 0000000000750ef0 [ 14.954052] PKRU: 55555554 [ 14.954068] Call Trace: [ 14.954085] <TASK> [ 14.954102] ? __warn+0xce/0x220 [ 14.954126] ? scx_ops_bypass+0x1d8/0x280 [ 14.954150] ? report_bug+0xc1/0x160 [ 14.954178] ? handle_bug+0x61/0x90 [ 14.954203] ? exc_invalid_op+0x1a/0x50 [ 14.954226] ? asm_exc_invalid_op+0x1a/0x20 [ 14.954250] ? raw_spin_rq_lock_nested+0x15/0x30 [ 14.954285] ? scx_ops_bypass+0x1d8/0x280 [ 14.954311] ? __mutex_unlock_slowpath+0x3a/0x260 [ 14.954343] scx_ops_disable_workfn+0xa3e/0xac0 [ 14.954381] ? __pfx_scx_ops_disable_workfn+0x10/0x10 [ 14.954413] kthread_worker_fn+0x101/0x2c0 [ 14.954442] ? __pfx_kthread_worker_fn+0x10/0x10 [ 14.954479] kthread+0xec/0x110 [ 14.954507] ? __pfx_kthread+0x10/0x10 [ 14.954530] ret_from_fork+0x37/0x50 [ 14.954553] ? __pfx_kthread+0x10/0x10 [ 14.954576] ret_from_fork_asm+0x1a/0x30 [ 14.954603] </TASK> [ 14.954621] irq event stamp: 21002 [ 14.954644] hardirqs last enabled at (21001): [<ffffffff863aa35f>] resched_cpu+0x9f/0xd0 [ 14.954686] hardirqs last disabled at (21002): [<ffffffff863dd0ba>] scx_ops_bypass+0x11a/0x280 [ 14.954735] softirqs last enabled at (20642): [<ffffffff863683d7>] __irq_exit_rcu+0x67/0xd0 [ 14.954782] softirqs last disabled at (20637): [<ffffffff863683d7>] __irq_exit_rcu+0x67/0xd0 [ 14.954829] ---[ end trace 0000000000000000 ]--- [ 15.022283] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) [ 15.092282] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) [ 15.149282] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) ok 1 exit # ===== END ===== And with it, the test passes without issue after 1000s of runs: .[root@virtme-ng sched_ext]# ./runner -t exit ===== START ===== TEST: exit DESCRIPTION: Verify we can cleanly exit a scheduler in multiple places OUTPUT: [ 7.412856] sched_ext: BPF scheduler "exit" enabled [ 7.427924] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) [ 7.466677] sched_ext: BPF scheduler "exit" enabled [ 7.475923] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) [ 7.512803] sched_ext: BPF scheduler "exit" enabled [ 7.532924] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) [ 7.586809] sched_ext: BPF scheduler "exit" enabled [ 7.595926] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) [ 7.661923] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) [ 7.723923] sched_ext: BPF scheduler "exit" disabled (unregistered from BPF) ok 1 exit # ===== END ===== ============================= RESULTS: PASSED: 1 SKIPPED: 0 FAILED: 0 Fixes: f0e1a06 ("sched_ext: Implement BPF extensible scheduler class") Signed-off-by: David Vernet <void@manifault.com> Signed-off-by: Tejun Heo <tj@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
Dec 5, 2024
Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE strnlen() performs an extra step to check whether the last byte of the input char buffer is a null character (commit 3009f89 ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")). This, together with possibly other configurations, cause the following IR to be generated: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 { %1 = alloca [64 x i8], align 16 ... 14: ; preds = %11 %15 = getelementptr inbounds i8, ptr %1, i64 63 %16 = load i8, ptr %15, align 1 %17 = tail call i1 @llvm.is.constant.i8(i8 %16) %18 = icmp eq i8 %16, 0 %19 = select i1 %17, i1 %18, i1 false br i1 %19, label %20, label %23 20: ; preds = %14 %21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23 ... 23: ; preds = %14, %11, %20 %24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24 ... } The above code calculates the address of the last char in the buffer (value %15) and then loads from it (value %16). Because the buffer is never initialized, the LLVM GVN pass marks value %16 as undefined: %13 = getelementptr inbounds i8, ptr %1, i64 63 br i1 undef, label %14, label %17 This gives later passes (SCCP, in particular) more DCE opportunities by propagating the undef value further, and eventually removes everything after the load on the uninitialized stack location: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 { %1 = alloca [64 x i8], align 16 ... 12: ; preds = %11 %13 = getelementptr inbounds i8, ptr %1, i64 63 unreachable } In this way, the generated native code will just fall through to the next function, as LLVM does not generate any code for the unreachable IR instruction and leaves the function without a terminator. Zero the on-stack buffer to avoid this possible UB. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402100205.PWXIz1ZK-lkp@intel.com/ Co-developed-by: Ruowen Qin <ruqin@redhat.com> Signed-off-by: Ruowen Qin <ruqin@redhat.com> Signed-off-by: Jinghao Jia <jinghao7@illinois.edu> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pull bot
pushed a commit
that referenced
this pull request
Jan 24, 2025
…-wake Some laptops have pins which are a wake source for S0i3/S3 but which aren't a wake source for S4/S5 and which cause issues when left unmasked during hibernation (S4). For example HP EliteBook 855 G7 has pin #24 that causes instant wakeup (hibernation failure) if left unmasked (it is a wake source only for S0i3/S3). GPIO pin #24 on this platform is likely dedicated to WWAN XMM7360 modem since this pin triggers wake notify to WWAN modem's parent PCIe port. Fix this by considering a pin a wake source only if it is marked as one for the current suspend type (S0i3/S3 vs S4/S5). Since Z-wake pins only make sense at runtime these were excluded from both of suspend categories, so pins with only the Z-wake flag set are effectively treated as non-wake pins. Fixes: 2fff0b5 ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend") Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pull bot
pushed a commit
that referenced
this pull request
Feb 20, 2025
syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x48/0x68 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x140/0x420 mm/slub.c:4761 kvfree+0x4c/0x68 mm/util.c:688 netdev_release+0x94/0xc8 net/core/net-sysfs.c:2065 device_release+0x98/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x2b0/0x438 lib/kobject.c:737 netdev_run_todo+0xe5c/0xfc8 net/core/dev.c:11185 rtnl_unlock+0x20/0x38 net/core/rtnetlink.c:151 cleanup_net+0x4fc/0x8c0 net/core/net_namespace.c:648 process_one_work+0x700/0x1398 kernel/workqueue.c:3236 process_scheduled_works kernel/workqueue.c:3317 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3398 kthread+0x4bc/0x608 kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 The buggy address belongs to the object at ffff000054d6e000 which belongs to the cache kmalloc-cg-4k of size 4096 The buggy address is located 3620 bytes inside of freed 4096-byte region [ffff000054d6e000, ffff000054d6f000) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94d68 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff000016276181 flags: 0x3fffe0000000040(head|node=0|zone=0|lastcpupid=0x1ffff) page_type: f5(slab) raw: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000040 ffff0000c000f500 dead000000000122 0000000000000000 head: 0000000000000000 0000000000040004 00000001f5000000 ffff000016276181 head: 03fffe0000000003 fffffdffc1535a01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff000054d6ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ed80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff000054d6ee00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff000054d6ee80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000054d6ef00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 2d07dc7 ("geneve: add initial netdev driver for GENEVE tunnels") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250213043354.91368-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
Apr 17, 2025
rpl is passed as a pointer to ethtool_cmis_module_poll(), so the correct size of rpl is sizeof(*rpl) which should be just 1 byte. Using the pointer size instead can cause stack corruption: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ethtool_cmis_wait_for_cond+0xf4/0x100 CPU: 72 UID: 0 PID: 4440 Comm: kworker/72:2 Kdump: loaded Tainted: G OE 6.11.0 #24 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/04GWWM, BIOS 1.6.6 09/20/2023 Workqueue: events module_flash_fw_work Call Trace: <TASK> panic+0x339/0x360 ? ethtool_cmis_wait_for_cond+0xf4/0x100 ? __pfx_status_success+0x10/0x10 ? __pfx_status_fail+0x10/0x10 __stack_chk_fail+0x10/0x10 ethtool_cmis_wait_for_cond+0xf4/0x100 ethtool_cmis_cdb_execute_cmd+0x1fc/0x330 ? __pfx_status_fail+0x10/0x10 cmis_cdb_module_features_get+0x6d/0xd0 ethtool_cmis_cdb_init+0x8a/0xd0 ethtool_cmis_fw_update+0x46/0x1d0 module_flash_fw_work+0x17/0xa0 process_one_work+0x179/0x390 worker_thread+0x239/0x340 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: a39c84d ("ethtool: cmis_cdb: Add a layer for supporting CDB commands") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250409173312.733012-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pull bot
pushed a commit
that referenced
this pull request
May 28, 2025
ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 #10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f #11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf #12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 #13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 #14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d #15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e #16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad #17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e #18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 #19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 #20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 #21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 #22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 #23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 #24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 #25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc #26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 #27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 #28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 #29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d #30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 #31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 #32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 #33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d #34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 #35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e #36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 #37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 #38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 #39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 #40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 #41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4664267.LvFx2qVVIh@rjwysocki.net Signed-off-by: Tamir Duberstein <tamird@gmail.com> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pull bot
pushed a commit
that referenced
this pull request
Jun 7, 2025
…ess handling Use copy_from_user_nofault() and copy_to_user_nofault() instead of copy_from/to_user functions in the misaligned access trap handlers. The following bug report was found when executing misaligned memory accesses: BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:162 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 115, name: two preempt_count: 0, expected: 0 CPU: 0 UID: 0 PID: 115 Comm: two Not tainted 6.14.0-rc5 #24 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff800160ea>] dump_backtrace+0x1c/0x24 [<ffffffff80002304>] show_stack+0x28/0x34 [<ffffffff80010fae>] dump_stack_lvl+0x4a/0x68 [<ffffffff80010fe0>] dump_stack+0x14/0x1c [<ffffffff8004e44e>] __might_resched+0xfa/0x104 [<ffffffff8004e496>] __might_sleep+0x3e/0x62 [<ffffffff801963c4>] __might_fault+0x1c/0x24 [<ffffffff80425352>] _copy_from_user+0x28/0xaa [<ffffffff8000296c>] handle_misaligned_store+0x204/0x254 [<ffffffff809eae82>] do_trap_store_misaligned+0x24/0xee [<ffffffff809f4f1a>] handle_exception+0x146/0x152 Fixes: b686ecd ("riscv: misaligned: Restrict user access to kernel memory") Fixes: 4413815 ("riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code") Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: Nylon Chen <nylon.chen@sifive.com> Link: https://lore.kernel.org/r/20250411073850.3699180-3-nylon.chen@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
pull bot
pushed a commit
that referenced
this pull request
Jun 18, 2025
When setting the funcgraph-args option when function graph tracer is net
enabled, it incorrectly enables it. Worse, it unregisters itself when it
was never registered. Then when it gets enabled again, it will register
itself a second time causing a WARNing.
~# echo 1 > /sys/kernel/tracing/options/funcgraph-args
~# head -20 /sys/kernel/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 813/26317372 #P:8
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
<idle>-0 [007] d..4. 358.966010: 7) 1.692 us | fetch_next_timer_interrupt(basej=4294981640, basem=357956000000, base_local=0xffff88823c3ae040, base_global=0xffff88823c3af300, tevt=0xffff888100e47cb8);
<idle>-0 [007] d..4. 358.966012: 7) | tmigr_cpu_deactivate(nextexp=357988000000) {
<idle>-0 [007] d..4. 358.966013: 7) | _raw_spin_lock(lock=0xffff88823c3b2320) {
<idle>-0 [007] d..4. 358.966014: 7) 0.981 us | preempt_count_add(val=1);
<idle>-0 [007] d..5. 358.966017: 7) 1.058 us | do_raw_spin_lock(lock=0xffff88823c3b2320);
<idle>-0 [007] d..4. 358.966019: 7) 5.824 us | }
<idle>-0 [007] d..5. 358.966021: 7) | tmigr_inactive_up(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
<idle>-0 [007] d..5. 358.966022: 7) | tmigr_update_events(group=0xffff888100cb9000, child=0x0, data=0xffff888100e47bc0) {
Notice the "tracer: nop" at the top there. The current tracer is the "nop"
tracer, but the content is obviously the function graph tracer.
Enabling function graph tracing will cause it to register again and
trigger a warning in the accounting:
~# echo function_graph > /sys/kernel/tracing/current_tracer
-bash: echo: write error: Device or resource busy
With the dmesg of:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 1095 at kernel/trace/ftrace.c:3509 ftrace_startup_subops+0xc1e/0x1000
Modules linked in: kvm_intel kvm irqbypass
CPU: 7 UID: 0 PID: 1095 Comm: bash Not tainted 6.16.0-rc2-test-00006-gea03de4105d3 #24 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ftrace_startup_subops+0xc1e/0x1000
Code: 48 b8 22 01 00 00 00 00 ad de 49 89 84 24 88 01 00 00 8b 44 24 08 89 04 24 e9 c3 f7 ff ff c7 04 24 ed ff ff ff e9 b7 f7 ff ff <0f> 0b c7 04 24 f0 ff ff ff e9 a9 f7 ff ff c7 04 24 f4 ff ff ff e9
RSP: 0018:ffff888133cff948 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 1ffff1102679ff31 RCX: 0000000000000000
RDX: 1ffffffff0b27a60 RSI: ffffffff8593d2f0 RDI: ffffffff85941140
RBP: 00000000000c2041 R08: ffffffffffffffff R09: ffffed1020240221
R10: ffff88810120110f R11: ffffed1020240214 R12: ffffffff8593d2f0
R13: ffffffff8593d300 R14: ffffffff85941140 R15: ffffffff85631100
FS: 00007f7ec6f28740(0000) GS:ffff8882b5251000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7ec6f181c0 CR3: 000000012f1d0005 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __pfx_ftrace_startup_subops+0x10/0x10
? find_held_lock+0x2b/0x80
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? trace_preempt_on+0xd0/0x110
? __pfx_trace_graph_entry_args+0x10/0x10
register_ftrace_graph+0x4d2/0x1020
? tracing_reset_online_cpus+0x14b/0x1e0
? __pfx_register_ftrace_graph+0x10/0x10
? ring_buffer_record_enable+0x16/0x20
? tracing_reset_online_cpus+0x153/0x1e0
? __pfx_tracing_reset_online_cpus+0x10/0x10
? __pfx_trace_graph_return+0x10/0x10
graph_trace_init+0xfd/0x160
tracing_set_tracer+0x500/0xa80
? __pfx_tracing_set_tracer+0x10/0x10
? lock_release+0x181/0x2d0
? _copy_from_user+0x26/0xa0
tracing_set_trace_write+0x132/0x1e0
? __pfx_tracing_set_trace_write+0x10/0x10
? ftrace_graph_func+0xcc/0x140
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
? ftrace_stub_direct_tramp+0x10/0x10
vfs_write+0x1d0/0xe90
? __pfx_vfs_write+0x10/0x10
Have the setting of the funcgraph-args check if function_graph tracer is
the current tracer of the instance, and if not, do nothing, as there's
nothing to do (the option is checked when function_graph tracing starts).
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250618073801.057ea636@gandalf.local.home
Fixes: c7a60a7 ("ftrace: Have funcgraph-args take affect during tracing")
Closes: https://lore.kernel.org/all/4ab1a7bdd0174ab09c7b0d68cdbff9a4@huawei.com/
Reported-by: Changbin Du <changbin.du@huawei.com>
Tested-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
pull bot
pushed a commit
that referenced
this pull request
Aug 2, 2025
Without the change `perf `hangs up on charaster devices. On my system
it's enough to run system-wide sampler for a few seconds to get the
hangup:
$ perf record -a -g --call-graph=dwarf
$ perf report
# hung
`strace` shows that hangup happens on reading on a character device
`/dev/dri/renderD128`
$ strace -y -f -p 2780484
strace: Process 2780484 attached
pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached
It's call trace descends into `elfutils`:
$ gdb -p 2780484
(gdb) bt
#0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0)
at ../sysdeps/unix/sysv/linux/pread64.c:25
#1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1
#2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 ()
from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0)
at util/dso.h:537
#6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114
#7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242
#8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0,
thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127,
best_effort=best_effort@entry=false) at util/thread.h:152
#13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0,
sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939
#14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540,
max_stack=127, symbols=true) at util/machine.c:2920
#15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440,
sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true)
at util/machine.c:2970
#16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440,
sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198
#17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0,
evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127
#18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127,
arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255
#19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540,
evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334
#20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0,
file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367
#21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245
#22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324
#23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224,
file_path=0x105ffbf0 "perf.data") at util/session.c:1419
#24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0,
--Type <RET> for more, q to quit, c to continue without paging--
quit
prog=prog@entry=0x7fff9df81220) at util/session.c:2132
#25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220)
at util/session.c:2181
#26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226
#27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390
#28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076
#29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827
#30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0)
at perf.c:351
#31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404
#32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448
#33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556
The hangup happens because nothing in` perf` or `elfutils` checks if a
mapped file is easily readable.
The change conservatively skips all non-regular files.
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]. Want to support this open source service? Please star it : )