Patch series "kernel/events/uprobes: uprobe_write_opcode() rewrite", v3.

Currently, uprobe_write_opcode() implements COW-breaking manually, which
is really far from ideal.  Further, there is interest in supporting
uprobes on hugetlb pages [1], and leaving at least the COW-breaking to the
core will make this much easier.

Also, I think the current code doesn't really handle some things properly
(see patch #3) when replacing/zapping pages.

Let's rewrite it, to leave COW-breaking to the fault handler, and handle
registration/unregistration by temporarily unmapping the anonymous page,
modifying it, and mapping it again.  We still have to implement zapping of
anonymous pages ourselves, unfortunately.

We could look into not performing the temporary unmapping if we can
perform the write atomically, which would likely also make adding hugetlb
support a lot easier.  But, limited (e.g., only PMD/PUD) hugetlb support
could be added on top of this with some tweaking.

Note that we now won't have to allocate another anonymous folio when
unregistering (which will be beneficial for hugetlb as well), we can
simply modify the already-mapped one from the registration (if any).  When
registering a uprobe, we'll first trigger a ptrace-like write fault to
break COW, to then modify the already-mapped page.

Briefly sanity tested with perf probes and with the bpf uprobes selftest.


This patch (of 3):

Pass VMA instead of MM to remove_breakpoint() and remove the "MM" argument
from install_breakpoint(), because it can easily be derived from the VMA.

Link: https://lkml.kernel.org/r/20250321113713.204682-1-david@redhat.com
Link: https://lkml.kernel.org/r/20250321113713.204682-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Namhyung kim <namhyung@kernel.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: tongtiangen <tongtiangen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Despite the fact that several lockdep-related checks are skipped when
calling trylock* versions of the locking primitives, for example
mutex_trylock, each time the mutex is acquired, a held_lock is still
placed onto the lockdep stack by __lock_acquire() which is called
regardless of whether the trylock* or regular locking API was used.

This means that if the caller successfully acquires more than
MAX_LOCK_DEPTH locks of the same class, even when using mutex_trylock,
lockdep will still complain that the maximum depth of the held lock stack
has been reached and disable itself.

For example, the following error currently occurs in the ARM version
of KVM, once the code tries to lock all vCPUs of a VM configured with more
than MAX_LOCK_DEPTH vCPUs, a situation that can easily happen on modern
systems, where having more than 48 CPUs is common, and it's also common to
run VMs that have vCPU counts approaching that number:

[  328.171264] BUG: MAX_LOCK_DEPTH too low!
[  328.175227] turning off the locking correctness validator.
[  328.180726] Please attach the output of /proc/lock_stat to the bug report
[  328.187531] depth: 48  max: 48!
[  328.190678] 48 locks held by qemu-kvm/11664:
[  328.194957]  #0: ffff800086de5ba0 (&kvm->lock){+.+.}-{3:3}, at: kvm_ioctl_create_device+0x174/0x5b0
[  328.204048]  #1: ffff0800e78800b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.212521]  #2: ffff07ffeee51e98 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.220991]  #3: ffff0800dc7d80b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.229463]  #4: ffff07ffe0c980b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.237934]  #5: ffff0800a3883c78 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.246405]  #6: ffff07fffbe480b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0

Luckily, in all instances that require locking all vCPUs, the
'kvm->lock' is taken a priori, and that fact makes it possible to use
the little known feature of lockdep, called a 'nest_lock', to avoid this
warning and subsequent lockdep self-disablement.

The action of 'nested lock' being provided to lockdep's lock_acquire(),
causes the lockdep to detect that the top of the held lock stack contains
a lock of the same class and then increment its reference counter instead
of pushing a new held_lock item onto that stack.

See __lock_acquire for more information.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use kvm_trylock_all_vcpus instead of a custom implementation when locking
all vCPUs of a VM, to avoid triggering a lockdep warning, in the case in
which the VM is configured to have more than MAX_LOCK_DEPTH vCPUs.

This fixes the following false lockdep warning:

[  328.171264] BUG: MAX_LOCK_DEPTH too low!
[  328.175227] turning off the locking correctness validator.
[  328.180726] Please attach the output of /proc/lock_stat to the bug report
[  328.187531] depth: 48  max: 48!
[  328.190678] 48 locks held by qemu-kvm/11664:
[  328.194957]  #0: ffff800086de5ba0 (&kvm->lock){+.+.}-{3:3}, at: kvm_ioctl_create_device+0x174/0x5b0
[  328.204048]  #1: ffff0800e78800b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.212521]  #2: ffff07ffeee51e98 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.220991]  #3: ffff0800dc7d80b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.229463]  #4: ffff07ffe0c980b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.237934]  #5: ffff0800a3883c78 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0
[  328.246405]  #6: ffff07fffbe480b8 (&vcpu->mutex){+.+.}-{3:3}, at: lock_all_vcpus+0x16c/0x2a0

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on RISC-V.
This allows each ftrace callsite to provide an ftrace_ops to the common
ftrace trampoline, allowing each callsite to invoke distinct tracer
functions without the need to fall back to list processing or to
allocate custom trampolines for each callsite. This significantly speeds
up cases where multiple distinct trace functions are used and callsites
are mostly traced by a single tracer.

The idea and most of the implementation is taken from the ARM64's
implementation of the same feature. The idea is to place a pointer to
the ftrace_ops as a literal at a fixed offset from the function entry
point, which can be recovered by the common ftrace trampoline.

We use -fpatchable-function-entry to reserve 8 bytes above the function
entry by emitting 2 4 byte or 4 2 byte  nops depending on the presence of
CONFIG_RISCV_ISA_C. These 8 bytes are patched at runtime with a pointer
to the associated ftrace_ops for that callsite. Functions are aligned to
8 bytes to make sure that the accesses to this literal are atomic.

This approach allows for directly invoking ftrace_ops::func even for
ftrace_ops which are dynamically-allocated (or part of a module),
without going via ftrace_ops_list_func.

We've benchamrked this with the ftrace_ops sample module on Spacemit K1
Jupiter:

Without this patch:

baseline (Linux rivos 6.14.0-09584-g7d06015d936c #3 SMP Sat Mar 29
+-----------------------+-----------------+----------------------------+
|  Number of tracers    | Total time (ns) | Per-call average time      |
|-----------------------+-----------------+----------------------------|
| Relevant | Irrelevant |    100000 calls | Total (ns) | Overhead (ns) |
|----------+------------+-----------------+------------+---------------|
|        0 |          0 |        1357958 |          13 |             - |
|        0 |          1 |        1302375 |          13 |             - |
|        0 |          2 |        1302375 |          13 |             - |
|        0 |         10 |        1379084 |          13 |             - |
|        0 |        100 |        1302458 |          13 |             - |
|        0 |        200 |        1302333 |          13 |             - |
|----------+------------+-----------------+------------+---------------|
|        1 |          0 |       13677833 |         136 |           123 |
|        1 |          1 |       18500916 |         185 |           172 |
|        1 |          2 |       2285645 |         228 |           215 |
|        1 |         10 |       58824709 |         588 |           575 |
|        1 |        100 |      505141584 |        5051 |          5038 |
|        1 |        200 |     1580473126 |       15804 |         15791 |
|----------+------------+-----------------+------------+---------------|
|        1 |          0 |       13561000 |         135 |           122 |
|        2 |          0 |       19707292 |         197 |           184 |
|       10 |          0 |       67774750 |         677 |           664 |
|      100 |          0 |      714123125 |        7141 |          7128 |
|      200 |          0 |     1918065668 |       19180 |         19167 |
+----------+------------+-----------------+------------+---------------+

Note: per-call overhead is estimated relative to the baseline case with
0 relevant tracers and 0 irrelevant tracers.

With this patch:

v4-rc4 (Linux rivos 6.14.0-09598-gd75747611c93 #4 SMP Sat Mar 29
+-----------------------+-----------------+----------------------------+
|  Number of tracers    | Total time (ns) | Per-call average time      |
|-----------------------+-----------------+----------------------------|
| Relevant | Irrelevant |    100000 calls | Total (ns) | Overhead (ns) |
|----------+------------+-----------------+------------+---------------|
|        0 |          0 |         1459917 |         14 |             - |
|        0 |          1 |         1408000 |         14 |             - |
|        0 |          2 |         1383792 |         13 |             - |
|        0 |         10 |         1430709 |         14 |             - |
|        0 |        100 |         1383791 |         13 |             - |
|        0 |        200 |         1383750 |         13 |             - |
|----------+------------+-----------------+------------+---------------|
|        1 |          0 |         5238041 |         52 |            38 |
|        1 |          1 |         5228542 |         52 |            38 |
|        1 |          2 |         5325917 |         53 |            40 |
|        1 |         10 |         5299667 |         52 |            38 |
|        1 |        100 |         5245250 |         52 |            39 |
|        1 |        200 |         5238459 |         52 |            39 |
|----------+------------+-----------------+------------+---------------|
|        1 |          0 |         5239083 |         52 |            38 |
|        2 |          0 |        19449417 |        194 |           181 |
|       10 |          0 |        67718584 |        677 |           663 |
|      100 |          0 |       709840708 |       7098 |          7085 |
|      200 |          0 |      2203580626 |      22035 |         22022 |
+----------+------------+-----------------+------------+---------------+

Note: per-call overhead is estimated relative to the baseline case with
0 relevant tracers and 0 irrelevant tracers.

As can be seen from the above:

 a) Whenever there is a single relevant tracer function associated with a
    tracee, the overhead of invoking the tracer is constant, and does not
    scale with the number of tracers which are *not* associated with that
    tracee.

 b) The overhead for a single relevant tracer has dropped to ~1/3 of the
    overhead prior to this series (from 122ns to 38ns). This is largely
    due to permitting calls to dynamically-allocated ftrace_ops without
    going through ftrace_ops_list_func.

Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>

[update kconfig, asm, refactor]

Signed-off-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250407180838.42877-10-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>

Currently there is no ISB between __deactivate_cptr_traps() disabling
traps that affect EL2 and fpsimd_lazy_switch_to_host() manipulating
registers potentially affected by CPTR traps.

When NV is not in use, this is safe because the relevant registers are
only accessed when guest_owns_fp_regs() && vcpu_has_sve(vcpu), and this
also implies that SVE traps affecting EL2 have been deactivated prior to
__guest_entry().

When NV is in use, a guest hypervisor may have configured SVE traps for
a nested context, and so it is necessary to have an ISB between
__deactivate_cptr_traps() and fpsimd_lazy_switch_to_host().

Due to the current lack of an ISB, when a guest hypervisor enables SVE
traps in CPTR, the host can take an unexpected SVE trap from within
fpsimd_lazy_switch_to_host(), e.g.

| Unhandled 64-bit el1h sync exception on CPU1, ESR 0x0000000066000000 -- SVE
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| pstate: 604023c9 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __kvm_vcpu_run+0x6f4/0x844
| lr : __kvm_vcpu_run+0x150/0x844
| sp : ffff800083903a60
| x29: ffff800083903a90 x28: ffff000801f4a300 x27: 0000000000000000
| x26: 0000000000000000 x25: ffff000801f90000 x24: ffff000801f900f0
| x23: ffff800081ff7720 x22: 0002433c807d623f x21: ffff000801f90000
| x20: ffff00087f730730 x19: 0000000000000000 x18: 0000000000000000
| x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
| x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff000801f90d70
| x5 : 0000000000001000 x4 : ffff8007fd739000 x3 : ffff000801f90000
| x2 : 0000000000000000 x1 : 00000000000003cc x0 : ffff800082f9d000
| Kernel panic - not syncing: Unhandled exception
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| Call trace:
|  show_stack+0x18/0x24 (C)
|  dump_stack_lvl+0x60/0x80
|  dump_stack+0x18/0x24
|  panic+0x168/0x360
|  __panic_unhandled+0x68/0x74
|  el1h_64_irq_handler+0x0/0x24
|  el1h_64_sync+0x6c/0x70
|  __kvm_vcpu_run+0x6f4/0x844 (P)
|  kvm_arm_vcpu_enter_exit+0x64/0xa0
|  kvm_arch_vcpu_ioctl_run+0x21c/0x870
|  kvm_vcpu_ioctl+0x1a8/0x9d0
|  __arm64_sys_ioctl+0xb4/0xf4
|  invoke_syscall+0x48/0x104
|  el0_svc_common.constprop.0+0x40/0xe0
|  do_el0_svc+0x1c/0x28
|  el0_svc+0x30/0xcc
|  el0t_64_sync_handler+0x10c/0x138
|  el0t_64_sync+0x198/0x19c
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x0000,000002c0,02df4fb9,97ee773f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: Unhandled exception ]---

Fix this by adding an ISB between __deactivate_traps() and
fpsimd_lazy_switch_to_host().

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>

…/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.16, take #3

- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
  missing synchronisation

- A small fix for the irqbypass hook fixes, tightening the check and
  ensuring that we only deal with MSI for both the old and the new
  route entry

- Rework the way the shadow LRs are addressed in a nesting
  configuration, plugging an embarrassing bug as well as simplifying
  the whole process

- Add yet another fix for the dreaded arch_timer_edge_cases selftest

The issue arises when kzalloc() is invoked while holding umem_mutex or
any other lock acquired under umem_mutex. This is problematic because
kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke
mmu_notifier_invalidate_range_start(). This function can lead to
mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again,
resulting in a deadlock.

The problematic flow:
             CPU0                      |              CPU1
---------------------------------------|------------------------------------------------
mlx5_ib_dereg_mr()                     |
 → revoke_mr()                         |
   → mutex_lock(&umem_odp->umem_mutex) |
                                       | mlx5_mkey_cache_init()
                                       |  → mutex_lock(&dev->cache.rb_lock)
                                       |  → mlx5r_cache_create_ent_locked()
                                       |    → kzalloc(GFP_KERNEL)
                                       |      → fs_reclaim()
                                       |        → mmu_notifier_invalidate_range_start()
                                       |          → mlx5_ib_invalidate_range()
                                       |            → mutex_lock(&umem_odp->umem_mutex)
   → cache_ent_find_and_store()        |
     → mutex_lock(&dev->cache.rb_lock) |

Additionally, when kzalloc() is called from within
cache_ent_find_and_store(), we encounter the same deadlock due to
re-acquisition of umem_mutex.

Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr()
and before acquiring rb_lock. This ensures that we don't hold
umem_mutex while performing memory allocations that could trigger
the reclaim path.

This change prevents the deadlock by ensuring proper lock ordering and
avoiding holding locks during memory allocation operations that could
trigger the reclaim path.

The following lockdep warning demonstrates the deadlock:

 python3/20557 is trying to acquire lock:
 ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at:
 mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib]

 but task is already holding lock:
 ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at:
 unmap_vmas+0x7b/0x1a0

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
       fs_reclaim_acquire+0x60/0xd0
       mem_cgroup_css_alloc+0x6f/0x9b0
       cgroup_init_subsys+0xa4/0x240
       cgroup_init+0x1c8/0x510
       start_kernel+0x747/0x760
       x86_64_start_reservations+0x25/0x30
       x86_64_start_kernel+0x73/0x80
       common_startup_64+0x129/0x138

 -> #2 (fs_reclaim){+.+.}-{0:0}:
       fs_reclaim_acquire+0x91/0xd0
       __kmalloc_cache_noprof+0x4d/0x4c0
       mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib]
       mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib]
       mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib]
       __mlx5_ib_add+0x4b/0x190 [mlx5_ib]
       mlx5r_probe+0xd9/0x320 [mlx5_ib]
       auxiliary_bus_probe+0x42/0x70
       really_probe+0xdb/0x360
       __driver_probe_device+0x8f/0x130
       driver_probe_device+0x1f/0xb0
       __driver_attach+0xd4/0x1f0
       bus_for_each_dev+0x79/0xd0
       bus_add_driver+0xf0/0x200
       driver_register+0x6e/0xc0
       __auxiliary_driver_register+0x6a/0xc0
       do_one_initcall+0x5e/0x390
       do_init_module+0x88/0x240
       init_module_from_file+0x85/0xc0
       idempotent_init_module+0x104/0x300
       __x64_sys_finit_module+0x68/0xc0
       do_syscall_64+0x6d/0x140
       entry_SYSCALL_64_after_hwframe+0x4b/0x53

 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}:
       __mutex_lock+0x98/0xf10
       __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib]
       mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib]
       ib_dereg_mr_user+0x85/0x1f0 [ib_core]
       uverbs_free_mr+0x19/0x30 [ib_uverbs]
       destroy_hw_idr_uobject+0x21/0x80 [ib_uverbs]
       uverbs_destroy_uobject+0x60/0x3d0 [ib_uverbs]
       uobj_destroy+0x57/0xa0 [ib_uverbs]
       ib_uverbs_cmd_verbs+0x4d5/0x1210 [ib_uverbs]
       ib_uverbs_ioctl+0x129/0x230 [ib_uverbs]
       __x64_sys_ioctl+0x596/0xaa0
       do_syscall_64+0x6d/0x140
       entry_SYSCALL_64_after_hwframe+0x4b/0x53

 -> #0 (&umem_odp->umem_mutex){+.+.}-{4:4}:
       __lock_acquire+0x1826/0x2f00
       lock_acquire+0xd3/0x2e0
       __mutex_lock+0x98/0xf10
       mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib]
       __mmu_notifier_invalidate_range_start+0x18e/0x1f0
       unmap_vmas+0x182/0x1a0
       exit_mmap+0xf3/0x4a0
       mmput+0x3a/0x100
       do_exit+0x2b9/0xa90
       do_group_exit+0x32/0xa0
       get_signal+0xc32/0xcb0
       arch_do_signal_or_restart+0x29/0x1d0
       syscall_exit_to_user_mode+0x105/0x1d0
       do_syscall_64+0x79/0x140
       entry_SYSCALL_64_after_hwframe+0x4b/0x53

 Chain exists of:
 &dev->cache.rb_lock --> mmu_notifier_invalidate_range_start -->
 &umem_odp->umem_mutex

 Possible unsafe locking scenario:

       CPU0                        CPU1
       ----                        ----
   lock(&umem_odp->umem_mutex);
                                lock(mmu_notifier_invalidate_range_start);
                                lock(&umem_odp->umem_mutex);
   lock(&dev->cache.rb_lock);

 *** DEADLOCK ***

Fixes: abb604a ("RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/3c8f225a8a9fade647d19b014df1172544643e4a.1750061612.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

When operating in concurrent STA/AP mode with host MLME enabled,
the firmware incorrectly sends disassociation frames to the STA
interface when clients disconnect from the AP interface.
This causes kernel warnings as the STA interface processes
disconnect events that don't apply to it:

[ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211]
[ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us
[ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT
[ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
[ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex]
[ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211]
[ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211]
[ 1303.370221] sp : ffff800083053be0
[ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000
[ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae
[ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008
[ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006
[ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048
[ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000
[ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300
[ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002
[ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186
[ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de
[ 1303.446221] Call trace:
[ 1303.448722]  cfg80211_process_disassoc+0x78/0xec [cfg80211] (P)
[ 1303.454894]  cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211]
[ 1303.460362]  mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex]
[ 1303.466380]  mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex]
[ 1303.472573]  mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex]
[ 1303.478243]  mwifiex_rx_work_queue+0x158/0x198 [mwifiex]
[ 1303.483734]  process_one_work+0x14c/0x28c
[ 1303.487845]  worker_thread+0x2cc/0x3d4
[ 1303.491680]  kthread+0x12c/0x208
[ 1303.495014]  ret_from_fork+0x10/0x20

Add validation in the STA receive path to verify that disassoc/deauth
frames originate from the connected AP. Frames that fail this check
are discarded early, preventing them from reaching the MLME layer and
triggering WARN_ON().

This filtering logic is similar with that used in the
ieee80211_rx_mgmt_disassoc() function in mac80211, which drops
disassoc frames that don't match the current BSSID
(!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring
only relevant frames are processed.

Tested on:
- 8997 with FW 16.68.1.p197

Fixes: 3699589 ("wifi: mwifiex: add host mlme for client mode")
Cc: stable@vger.kernel.org
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250701142643.658990-1-ivitro@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

alloc_tag_top_users() attempts to lock alloc_tag_cttype->mod_lock even
when the alloc_tag_cttype is not allocated because:

  1) alloc tagging is disabled because mem profiling is disabled
     (!alloc_tag_cttype)
  2) alloc tagging is enabled, but not yet initialized (!alloc_tag_cttype)
  3) alloc tagging is enabled, but failed initialization
     (!alloc_tag_cttype or IS_ERR(alloc_tag_cttype))

In all cases, alloc_tag_cttype is not allocated, and therefore
alloc_tag_top_users() should not attempt to acquire the semaphore.

This leads to a crash on memory allocation failure by attempting to
acquire a non-existent semaphore:

  Oops: general protection fault, probably for non-canonical address 0xdffffc000000001b: 0000 [#3] SMP KASAN NOPTI
  KASAN: null-ptr-deref in range [0x00000000000000d8-0x00000000000000df]
  CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G      D             6.16.0-rc2 #1 VOLUNTARY
  Tainted: [D]=DIE
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
  RIP: 0010:down_read_trylock+0xaa/0x3b0
  Code: d0 7c 08 84 d2 0f 85 a0 02 00 00 8b 0d df 31 dd 04 85 c9 75 29 48 b8 00 00 00 00 00 fc ff df 48 8d 6b 68 48 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 88 02 00 00 48 3b 5b 68 0f 85 53 01 00 00 65 ff
  RSP: 0000:ffff8881002ce9b8 EFLAGS: 00010016
  RAX: dffffc0000000000 RBX: 0000000000000070 RCX: 0000000000000000
  RDX: 000000000000001b RSI: 000000000000000a RDI: 0000000000000070
  RBP: 00000000000000d8 R08: 0000000000000001 R09: ffffed107dde49d1
  R10: ffff8883eef24e8b R11: ffff8881002cec20 R12: 1ffff11020059d37
  R13: 00000000003fff7b R14: ffff8881002cec20 R15: dffffc0000000000
  FS:  00007f963f21d940(0000) GS:ffff888458ca6000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f963f5edf71 CR3: 000000010672c000 CR4: 0000000000350ef0
  Call Trace:
   <TASK>
   codetag_trylock_module_list+0xd/0x20
   alloc_tag_top_users+0x369/0x4b0
   __show_mem+0x1cd/0x6e0
   warn_alloc+0x2b1/0x390
   __alloc_frozen_pages_noprof+0x12b9/0x21a0
   alloc_pages_mpol+0x135/0x3e0
   alloc_slab_page+0x82/0xe0
   new_slab+0x212/0x240
   ___slab_alloc+0x82a/0xe00
   </TASK>

As David Wang points out, this issue became easier to trigger after commit
780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init").

Before the commit, the issue occurred only when it failed to allocate and
initialize alloc_tag_cttype or if a memory allocation fails before
alloc_tag_init() is called.  After the commit, it can be easily triggered
when memory profiling is compiled but disabled at boot.

To properly determine whether alloc_tag_init() has been called and its
data structures initialized, verify that alloc_tag_cttype is a valid
pointer before acquiring the semaphore.  If the variable is NULL or an
error value, it has not been properly initialized.  In such a case, just
skip and do not attempt to acquire the semaphore.

[harry.yoo@oracle.com: v3]
  Link: https://lkml.kernel.org/r/20250624072513.84219-1-harry.yoo@oracle.com
Link: https://lkml.kernel.org/r/20250620195305.1115151-1-harry.yoo@oracle.com
Fixes: 780138b ("alloc_tag: check mem_profiling_support in alloc_tag_init")
Fixes: 1438d34 ("lib: add memory allocations report in show_mem()")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202506181351.bba867dd-lkp@intel.com
Acked-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: David Wang <00107082@163.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Yuanyuan Zhong <yzhong@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If "try_verify_in_tasklet" is set for dm-verity, DM_BUFIO_CLIENT_NO_SLEEP
is enabled for dm-bufio. However, when bufio tries to evict buffers, there
is a chance to trigger scheduling in spin_lock_bh, the following warning
is hit:

BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2745
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 123, name: kworker/2:2
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
4 locks held by kworker/2:2/123:
 #0: ffff88800a2d1548 ((wq_completion)dm_bufio_cache){....}-{0:0}, at: process_one_work+0xe46/0x1970
 #1: ffffc90000d97d20 ((work_completion)(&dm_bufio_replacement_work)){....}-{0:0}, at: process_one_work+0x763/0x1970
 #2: ffffffff8555b528 (dm_bufio_clients_lock){....}-{3:3}, at: do_global_cleanup+0x1ce/0x710
 #3: ffff88801d5820b8 (&c->spinlock){....}-{2:2}, at: do_global_cleanup+0x2a5/0x710
Preemption disabled at:
[<0000000000000000>] 0x0
CPU: 2 UID: 0 PID: 123 Comm: kworker/2:2 Not tainted 6.16.0-rc3-g90548c634bd0 #305 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: dm_bufio_cache do_global_cleanup
Call Trace:
 <TASK>
 dump_stack_lvl+0x53/0x70
 __might_resched+0x360/0x4e0
 do_global_cleanup+0x2f5/0x710
 process_one_work+0x7db/0x1970
 worker_thread+0x518/0xea0
 kthread+0x359/0x690
 ret_from_fork+0xf3/0x1b0
 ret_from_fork_asm+0x1a/0x30
 </TASK>

That can be reproduced by:

  veritysetup format --data-block-size=4096 --hash-block-size=4096 /dev/vda /dev/vdb
  SIZE=$(blockdev --getsz /dev/vda)
  dmsetup create myverity -r --table "0 $SIZE verity 1 /dev/vda /dev/vdb 4096 4096 <data_blocks> 1 sha256 <root_hash> <salt> 1 try_verify_in_tasklet"
  mount /dev/dm-0 /mnt -o ro
  echo 102400 > /sys/module/dm_bufio/parameters/max_cache_size_bytes
  [read files in /mnt]

Cc: stable@vger.kernel.org	# v6.4+
Fixes: 450e8de ("dm bufio: improve concurrent IO performance")
Signed-off-by: Wang Shuai <wangshuai12@xiaomi.com>
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

If the PHY driver uses another PHY internally (e.g. in case of eUSB2,
repeaters are represented as PHYs), then it would trigger the following
lockdep splat because all PHYs use a single static lockdep key and thus
lockdep can not identify whether there is a dependency or not and
reports a false positive.

Make PHY subsystem use dynamic lockdep keys, assigning each driver a
separate key. This way lockdep can correctly identify dependency graph
between mutexes.

 ============================================
 WARNING: possible recursive locking detected
 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 Not tainted
 --------------------------------------------
 kworker/u51:0/78 is trying to acquire lock:
 ffff0008116554f0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c

 but task is already holding lock:
 ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&phy->mutex);
   lock(&phy->mutex);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 4 locks held by kworker/u51:0/78:
  #0: ffff000800010948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x18c/0x5ec
  #1: ffff80008036bdb0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x5ec
  #2: ffff0008094ac8f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x188
  #3: ffff000813c10cf0 (&phy->mutex){+.+.}-{4:4}, at: phy_init+0x4c/0x12c

 stack backtrace:
 CPU: 0 UID: 0 PID: 78 Comm: kworker/u51:0 Not tainted 6.15.0-rc7-next-20250522-12896-g3932f283970c #3455 PREEMPT
 Hardware name: Qualcomm CRD, BIOS 6.0.240904.BOOT.MXF.2.4-00528.1-HAMOA-1 09/ 4/2024
 Workqueue: events_unbound deferred_probe_work_func
 Call trace:
  show_stack+0x18/0x24 (C)
  dump_stack_lvl+0x90/0xd0
  dump_stack+0x18/0x24
  print_deadlock_bug+0x258/0x348
  __lock_acquire+0x10fc/0x1f84
  lock_acquire+0x1c8/0x338
  __mutex_lock+0xb8/0x59c
  mutex_lock_nested+0x24/0x30
  phy_init+0x4c/0x12c
  snps_eusb2_hsphy_init+0x54/0x1a0
  phy_init+0xe0/0x12c
  dwc3_core_init+0x450/0x10b4
  dwc3_core_probe+0xce4/0x15fc
  dwc3_probe+0x64/0xb0
  platform_probe+0x68/0xc4
  really_probe+0xbc/0x298
  __driver_probe_device+0x78/0x12c
  driver_probe_device+0x3c/0x160
  __device_attach_driver+0xb8/0x138
  bus_for_each_drv+0x84/0xe0
  __device_attach+0x9c/0x188
  device_initial_probe+0x14/0x20
  bus_probe_device+0xac/0xb0
  deferred_probe_work_func+0x8c/0xc8
  process_one_work+0x208/0x5ec
  worker_thread+0x1c0/0x368
  kthread+0x14c/0x20c
  ret_from_fork+0x10/0x20

Fixes: 3584f63 ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater")
Fixes: e246355 ("phy: amlogic: Add Amlogic AXG PCIE PHY Driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/lkml/ZnpoAVGJMG4Zu-Jw@hovoldconsulting.com/
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250605-phy-subinit-v3-1-1e1e849e10cd@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe,
releases the aarp_lock, sleeps, then re-acquires the lock.  During that
window an expire timer thread (__aarp_expire_timer) can remove and
kfree() the same entry, leading to a use-after-free.

race condition:

         cpu 0                          |            cpu 1
    atalk_sendmsg()                     |   atif_proxy_probe_device()
    aarp_send_ddp()                     |   aarp_proxy_probe_network()
    mod_timer()                         |   lock(aarp_lock) // LOCK!!
    timeout around 200ms                |   alloc(aarp_entry)
    and then call                       |   proxies[hash] = aarp_entry
    aarp_expire_timeout()               |   aarp_send_probe()
                                        |   unlock(aarp_lock) // UNLOCK!!
    lock(aarp_lock) // LOCK!!           |   msleep(100);
    __aarp_expire_timer(&proxies[ct])   |
    free(aarp_entry)                    |
    unlock(aarp_lock) // UNLOCK!!       |
                                        |   lock(aarp_lock) // LOCK!!
                                        |   UAF aarp_entry !!

==================================================================
BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
Read of size 4 at addr ffff8880123aa360 by task repro/13278

CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full)
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:408 [inline]
 print_report+0xc1/0x630 mm/kasan/report.c:521
 kasan_report+0xca/0x100 mm/kasan/report.c:634
 aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
 atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
 sock_do_ioctl+0xdc/0x260 net/socket.c:1190
 sock_ioctl+0x239/0x6a0 net/socket.c:1311
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:906 [inline]
 __se_sys_ioctl fs/ioctl.c:892 [inline]
 __x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
 </TASK>

Allocated:
 aarp_alloc net/appletalk/aarp.c:382 [inline]
 aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468
 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
 atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818

Freed:
 kfree+0x148/0x4d0 mm/slub.c:4841
 __aarp_expire net/appletalk/aarp.c:90 [inline]
 __aarp_expire_timer net/appletalk/aarp.c:261 [inline]
 aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317

The buggy address belongs to the object at ffff8880123aa300
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 96 bytes inside of
 freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0)

Memory state around the buggy address:
 ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com>
Link: https://patch.msgid.link/20250717012843.880423-1-hxzene@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The generic/001 test of xfstests suite fails and corrupts
the HFS volume:

sudo ./check generic/001
FSTYP         -- hfs
PLATFORM      -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc2+ #3 SMP PREEMPT_DYNAMIC Fri Apr 25 17:13:00 PDT 2>
MKFS_OPTIONS  -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch

generic/001 32s ... _check_generic_filesystem: filesystem on /dev/loop50 is inconsistent
(see /home/slavad/XFSTESTS-2/xfstests-dev/results//generic/001.full for details)

Ran: generic/001
Failures: generic/001
Failed 1 of 1 tests

fsck.hfs -d -n ./test-image.bin
** ./test-image.bin (NO WRITE)
	Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
   Executing fsck_hfs (version 540.1-Linux).
** Checking HFS volume.
   The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
   Unused node is not erased (node = 2)
   Unused node is not erased (node = 4)
<skipped>
   Unused node is not erased (node = 253)
   Unused node is not erased (node = 254)
   Unused node is not erased (node = 255)
   Unused node is not erased (node = 256)
** Checking catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
   Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000
                  CBTStat = 0x0004 CatStat = 0x00000000
** The volume untitled was found corrupt and needs to be repaired.
	volume type is HFS
	primary MDB is at block 2 0x02
	alternate MDB is at block 20971518 0x13ffffe
	primary VHB is at block 0 0x00
	alternate VHB is at block 0 0x00
	sector size = 512 0x200
	VolumeObject flags = 0x19
	total sectors for volume = 20971520 0x1400000
	total sectors for embedded volume = 0 0x00

This patch adds logic of clearing the deleted b-tree node.

sudo ./check generic/001
FSTYP         -- hfs
PLATFORM      -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc2+ #3 SMP PREEMPT_DYNAMIC Fri Apr 25 17:13:00 PDT 2025
MKFS_OPTIONS  -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch

generic/001 9s ...  32s
Ran: generic/001
Passed all 1 tests

fsck.hfs -d -n ./test-image.bin
** ./test-image.bin (NO WRITE)
	Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
   Executing fsck_hfs (version 540.1-Linux).
** Checking HFS volume.
   The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled appears to be OK.

Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250430001211.1912533-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>

Currently, the call to folio_precise_page_mapcount() from kpage_read() can
race with a folio split.  When the race happens we trigger a
VM_BUG_ON_FOLIO() in folio_entire_mapcount() (see splat below).

This commit fixes this race by using snapshot_page() so that we retrieve
the folio mapcount using a folio snapshot.

[ 2356.558576] page: refcount:1 mapcount:1 mapping:0000000000000000 index:0xffff85200 pfn:0x6f7c00
[ 2356.558748] memcg:ffff000651775780
[ 2356.558763] anon flags: 0xafffff60020838(uptodate|dirty|lru|owner_2|swapbacked|node=1|zone=2|lastcpupid=0xfffff)
[ 2356.558796] raw: 00afffff60020838 fffffdffdb5d0048 fffffdffdadf7fc8 ffff00064c1629c1
[ 2356.558817] raw: 0000000ffff85200 0000000000000000 0000000100000000 ffff000651775780
[ 2356.558839] page dumped because: VM_BUG_ON_FOLIO(!folio_test_large(folio))
[ 2356.558882] ------------[ cut here ]------------
[ 2356.558897] kernel BUG at ./include/linux/mm.h:1103!
[ 2356.558982] Internal error: Oops - BUG: 00000000f2000800 [#1]  SMP
[ 2356.564729] CPU: 8 UID: 0 PID: 1864 Comm: folio-split-rac Tainted: G S      W           6.15.0+ #3 PREEMPT(voluntary)
[ 2356.566196] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 2356.566814] Hardware name: Red Hat KVM, BIOS edk2-20241117-3.el9 11/17/2024
[ 2356.567684] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2356.568563] pc : kpage_read.constprop.0+0x26c/0x290
[ 2356.569605] lr : kpage_read.constprop.0+0x26c/0x290
[ 2356.569992] sp : ffff80008fb739b0
[ 2356.570263] x29: ffff80008fb739b0 x28: ffff00064aa69580 x27: 00000000ff000000
[ 2356.570842] x26: 0000fffffffffff8 x25: ffff00064aa69580 x24: ffff80008fb73ae0
[ 2356.571411] x23: 0000000000000001 x22: 0000ffff86c6e8b8 x21: 0000000000000008
[ 2356.571978] x20: 00000000006f7c00 x19: 0000ffff86c6e8b8 x18: 0000000000000000
[ 2356.572581] x17: 3630303066666666 x16: 0000000000000003 x15: 0000000000001000
[ 2356.573217] x14: 00000000ffffffff x13: 0000000000000004 x12: 00aaaaaa00aaaaaa
[ 2356.577674] x11: 0000000000000000 x10: 00aaaaaa00aaaaaa x9 : ffffbf3afca6c300
[ 2356.578332] x8 : 0000000000000002 x7 : 0000000000000001 x6 : 0000000000000001
[ 2356.578984] x5 : ffff000c79812408 x4 : 0000000000000000 x3 : 0000000000000000
[ 2356.579635] x2 : 0000000000000000 x1 : ffff00064aa69580 x0 : 000000000000003e
[ 2356.580286] Call trace:
[ 2356.580524]  kpage_read.constprop.0+0x26c/0x290 (P)
[ 2356.580982]  kpagecount_read+0x28/0x40
[ 2356.581336]  proc_reg_read+0x38/0x100
[ 2356.581681]  vfs_read+0xcc/0x320
[ 2356.581992]  ksys_read+0x74/0x118
[ 2356.582306]  __arm64_sys_read+0x24/0x38
[ 2356.582668]  invoke_syscall+0x70/0x100
[ 2356.583022]  el0_svc_common.constprop.0+0x48/0xf8
[ 2356.583456]  do_el0_svc+0x28/0x40
[ 2356.583930]  el0_svc+0x38/0x118
[ 2356.584328]  el0t_64_sync_handler+0x144/0x168
[ 2356.584883]  el0t_64_sync+0x19c/0x1a0
[ 2356.585350] Code: aa0103e0 9003a541 91082021 97f813fc (d4210000)
[ 2356.586130] ---[ end trace 0000000000000000 ]---
[ 2356.587377] note: folio-split-rac[1864] exited with irqs disabled
[ 2356.588050] note: folio-split-rac[1864] exited with preempt_count 1

Link: https://lkml.kernel.org/r/1c05cc725b90962d56323ff2e28e9cc3ae397b68.1752499009.git.luizcap@redhat.com
Signed-off-by: Luiz Capitulino <luizcap@redhat.com>
Reported-by: syzbot+3d7dc5eaba6b932f8535@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67812fbd.050a0220.d0267.0030.GAE@google.com/Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pert script tests fails with segmentation fault as below:

  92: perf script tests:
  --- start ---
  test child forked, pid 103769
  DB test
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.012 MB /tmp/perf-test-script.7rbftEpOzX/perf.data (9 samples) ]
  /usr/libexec/perf-core/tests/shell/script.sh: line 35:
  103780 Segmentation fault      (core dumped)
  perf script -i "${perfdatafile}" -s "${db_test}"
  --- Cleaning up ---
  ---- end(-1) ----
  92: perf script tests                                               : FAILED!

Backtrace pointed to :
	#0  0x0000000010247dd0 in maps.machine ()
	#1  0x00000000101d178c in db_export.sample ()
	#2  0x00000000103412c8 in python_process_event ()
	#3  0x000000001004eb28 in process_sample_event ()
	#4  0x000000001024fcd0 in machines.deliver_event ()
	#5  0x000000001025005c in perf_session.deliver_event ()
	#6  0x00000000102568b0 in __ordered_events__flush.part.0 ()
	#7  0x0000000010251618 in perf_session.process_events ()
	#8  0x0000000010053620 in cmd_script ()
	#9  0x00000000100b5a28 in run_builtin ()
	#10 0x00000000100b5f94 in handle_internal_command ()
	#11 0x0000000010011114 in main ()

Further investigation reveals that this occurs in the `perf script tests`,
because it uses `db_test.py` script. This script sets `perf_db_export_mode = True`.

With `perf_db_export_mode` enabled, if a sample originates from a hypervisor,
perf doesn't set maps for "[H]" sample in the code. Consequently, `al->maps` remains NULL
when `maps__machine(al->maps)` is called from `db_export__sample`.

As al->maps can be NULL in case of Hypervisor samples , use thread->maps
because even for Hypervisor sample, machine should exist.
If we don't have machine for some reason, return -1 to avoid segmentation fault.

Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Link: https://lore.kernel.org/r/20250429065132.36839-1-adityab1@linux.ibm.com
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Without the change `perf `hangs up on charaster devices. On my system
it's enough to run system-wide sampler for a few seconds to get the
hangup:

    $ perf record -a -g --call-graph=dwarf
    $ perf report
    # hung

`strace` shows that hangup happens on reading on a character device
`/dev/dri/renderD128`

    $ strace -y -f -p 2780484
    strace: Process 2780484 attached
    pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached

It's call trace descends into `elfutils`:

    $ gdb -p 2780484
    (gdb) bt
    #0  0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0)
        at ../sysdeps/unix/sysv/linux/pread64.c:25
    #1  0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1
    #2  0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #3  0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #4  0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 ()
       from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #5  0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0)
        at util/dso.h:537
    #6  0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114
    #7  frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242
    #8  0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #9  0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0,
        thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127,
        best_effort=best_effort@entry=false) at util/thread.h:152
    #13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0,
        sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939
    #14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540,
        max_stack=127, symbols=true) at util/machine.c:2920
    #15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440,
        sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true)
        at util/machine.c:2970
    #16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440,
        sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198
    #17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0,
        evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127
    #18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127,
        arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255
    #19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540,
        evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334
    #20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0,
        file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367
    #21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245
    #22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324
    #23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224,
        file_path=0x105ffbf0 "perf.data") at util/session.c:1419
    #24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0,
    --Type <RET> for more, q to quit, c to continue without paging--
    quit
        prog=prog@entry=0x7fff9df81220) at util/session.c:2132
    #25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220)
        at util/session.c:2181
    #26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226
    #27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390
    #28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076
    #29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827
    #30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0)
        at perf.c:351
    #31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404
    #32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448
    #33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556

The hangup happens because nothing in` perf` or `elfutils` checks if a
mapped file is easily readable.

The change conservatively skips all non-regular files.

Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Symbolize stack traces by creating a live machine. Add this
functionality to dump_stack and switch dump_stack users to use
it. Switch TUI to use it. Add stack traces to the child test function
which can be useful to diagnose blocked code.

Example output:
```
$ perf test -vv PERF_RECORD_
...
  7: PERF_RECORD_* events & perf_sample fields:
  7: PERF_RECORD_* events & perf_sample fields                       : Running (1 active)
^C
Signal (2) while running tests.
Terminating tests with the same signal
Internal test harness failure. Completing any started tests:
:  7: PERF_RECORD_* events & perf_sample fields:

---- unexpected signal (2) ----
    #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0
    #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
    #2 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64
    #3 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72
    #4 0x7fc12fef1393 in __nanosleep nanosleep.c:26
    #5 0x7fc12ff02d68 in __sleep sleep.c:55
    #6 0x55788c63196b in test__PERF_RECORD perf-record.c:0
    #7 0x55788c620fb0 in run_test_child builtin-test.c:0
    #8 0x55788c5bd18d in start_command run-command.c:127
    #9 0x55788c621ef3 in __cmd_test builtin-test.c:0
    #10 0x55788c6225bf in cmd_test ??:0
    #11 0x55788c5afbd0 in run_builtin perf.c:0
    #12 0x55788c5afeeb in handle_internal_command perf.c:0
    #13 0x55788c52b383 in main ??:0
    #14 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74
    #15 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
    #16 0x55788c52b9d1 in _start ??:0

---- unexpected signal (2) ----
    #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0
    #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
    #2 0x7fc12fea3a14 in pthread_sigmask@GLIBC_2.2.5 pthread_sigmask.c:45
    #3 0x7fc12fe49fd9 in __GI___sigprocmask sigprocmask.c:26
    #4 0x7fc12ff2601b in __longjmp_chk longjmp.c:36
    #5 0x55788c6210c0 in print_test_result.isra.0 builtin-test.c:0
    #6 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
    #7 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64
    #8 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72
    #9 0x7fc12fef1393 in __nanosleep nanosleep.c:26
    #10 0x7fc12ff02d68 in __sleep sleep.c:55
    #11 0x55788c63196b in test__PERF_RECORD perf-record.c:0
    #12 0x55788c620fb0 in run_test_child builtin-test.c:0
    #13 0x55788c5bd18d in start_command run-command.c:127
    #14 0x55788c621ef3 in __cmd_test builtin-test.c:0
    #15 0x55788c6225bf in cmd_test ??:0
    #16 0x55788c5afbd0 in run_builtin perf.c:0
    #17 0x55788c5afeeb in handle_internal_command perf.c:0
    #18 0x55788c52b383 in main ??:0
    #19 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74
    #20 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
    #21 0x55788c52b9d1 in _start ??:0
  7: PERF_RECORD_* events & perf_sample fields                       : Skip (permissions)
```

Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250624210500.2121303-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Calling perf top with branch filters enabled on Intel CPU's
with branch counters logging (A.K.A LBR event logging [1]) support
results in a segfault.

$ perf top  -e '{cpu_core/cpu-cycles/,cpu_core/event=0xc6,umask=0x3,frontend=0x11,name=frontend_retired_dsb_miss/}' -j any,counter
...
Thread 27 "perf" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffafff76c0 (LWP 949003)]
perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653
653			*width = env->cpu_pmu_caps ? env->br_cntr_width :
(gdb) bt
 #0  perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653
 #1  0x00000000005b1599 in symbol__account_br_cntr (branch=0x7fffcc3db580, evsel=0xfea2d0, offset=12, br_cntr=8) at util/annotate.c:345
 #2  0x00000000005b17fb in symbol__account_cycles (addr=5658172, start=5658160, sym=0x7fffcc0ee420, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:389
 #3  0x00000000005b1976 in addr_map_symbol__account_cycles (ams=0x7fffcd7b01d0, start=0x7fffcd7b02b0, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:422
 #4  0x000000000068d57f in hist__account_cycles (bs=0x110d288, al=0x7fffafff6540, sample=0x7fffafff6760, nonany_branch_mode=false, total_cycles=0x0, evsel=0xfea2d0) at util/hist.c:2850
 #5  0x0000000000446216 in hist_iter__top_callback (iter=0x7fffafff6590, al=0x7fffafff6540, single=true, arg=0x7fffffff9e00) at builtin-top.c:737
 #6  0x0000000000689787 in hist_entry_iter__add (iter=0x7fffafff6590, al=0x7fffafff6540, max_stack_depth=127, arg=0x7fffffff9e00) at util/hist.c:1359
 #7  0x0000000000446710 in perf_event__process_sample (tool=0x7fffffff9e00, event=0x110d250, evsel=0xfea2d0, sample=0x7fffafff6760, machine=0x108c968) at builtin-top.c:845
 #8  0x0000000000447735 in deliver_event (qe=0x7fffffffa120, qevent=0x10fc200) at builtin-top.c:1211
 #9  0x000000000064ccae in do_flush (oe=0x7fffffffa120, show_progress=false) at util/ordered-events.c:245
 #10 0x000000000064d005 in __ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP, timestamp=0) at util/ordered-events.c:324
 #11 0x000000000064d0ef in ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP) at util/ordered-events.c:342
 #12 0x00000000004472a9 in process_thread (arg=0x7fffffff9e00) at builtin-top.c:1120
 #13 0x00007ffff6e7dba8 in start_thread (arg=<optimized out>) at pthread_create.c:448
 #14 0x00007ffff6f01b8c in __GI___clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:78

The cause is that perf_env__find_br_cntr_info tries to access a
null pointer pmu_caps in the perf_env struct. A similar issue exists
for homogeneous core systems which use the cpu_pmu_caps structure.

Fix this by populating cpu_pmu_caps and pmu_caps structures with
values from sysfs when calling perf top with branch stack sampling
enabled.

[1], LBR event logging introduced here:
https://lore.kernel.org/all/20231025201626.3000228-5-kan.liang@linux.intel.com/

Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250612163659.1357950-2-thomas.falcon@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The existing code move the VF NIC to new namespace when NETDEV_REGISTER is
received on netvsc NIC. During deletion of the namespace,
default_device_exit_batch() >> default_device_exit_net() is called. When
netvsc NIC is moved back and registered to the default namespace, it
automatically brings VF NIC back to the default namespace. This will cause
the default_device_exit_net() >> for_each_netdev_safe loop unable to detect
the list end, and hit NULL ptr:

[  231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0
[  231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010
[  231.450246] #PF: supervisor read access in kernel mode
[  231.450579] #PF: error_code(0x0000) - not-present page
[  231.450916] PGD 17b8a8067 P4D 0
[  231.451163] Oops: Oops: 0000 [#1] SMP NOPTI
[  231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY
[  231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024
[  231.452692] Workqueue: netns cleanup_net
[  231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0
[  231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00
[  231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246
[  231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb
[  231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564
[  231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000
[  231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340
[  231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340
[  231.457161] FS:  0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000
[  231.457707] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0
[  231.458434] Call Trace:
[  231.458600]  <TASK>
[  231.458777]  ops_undo_list+0x100/0x220
[  231.459015]  cleanup_net+0x1b8/0x300
[  231.459285]  process_one_work+0x184/0x340

To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid
changing the netdev list when default_device_exit_net() is using it.

Cc: stable@vger.kernel.org
Fixes: 4c26280 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1754511711-11188-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…dlock

When a user creates a dualpi2 qdisc it automatically sets a timer. This
timer will run constantly and update the qdisc's probability field.
The issue is that the timer acquires the qdisc root lock and runs in
hardirq. The qdisc root lock is also acquired in dev.c whenever a packet
arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq,
it may interrupt the packet processing running in softirq. If that happens
and it runs on the same CPU, it will acquire the same lock and cause a
deadlock. The following splat shows up when running a kernel compiled with
lock debugging:

[  +0.000224] WARNING: inconsistent lock state
[  +0.000224] 6.16.0+ #10 Not tainted
[  +0.000169] --------------------------------
[  +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[  +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes:
[  +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140
[  +0.000000] {IN-HARDIRQ-W} state was registered at:
[  +0.000000]   lock_acquire.part.0+0xb6/0x220
[  +0.000000]   _raw_spin_lock+0x31/0x80
[  +0.000000]   dualpi2_timer+0x6f/0x270
[  +0.000000]   __hrtimer_run_queues+0x1c5/0x360
[  +0.000000]   hrtimer_interrupt+0x115/0x260
[  +0.000000]   __sysvec_apic_timer_interrupt+0x6d/0x1a0
[  +0.000000]   sysvec_apic_timer_interrupt+0x6e/0x80
[  +0.000000]   asm_sysvec_apic_timer_interrupt+0x1a/0x20
[  +0.000000]   pv_native_safe_halt+0xf/0x20
[  +0.000000]   default_idle+0x9/0x10
[  +0.000000]   default_idle_call+0x7e/0x1e0
[  +0.000000]   do_idle+0x1e8/0x250
[  +0.000000]   cpu_startup_entry+0x29/0x30
[  +0.000000]   rest_init+0x151/0x160
[  +0.000000]   start_kernel+0x6f3/0x700
[  +0.000000]   x86_64_start_reservations+0x24/0x30
[  +0.000000]   x86_64_start_kernel+0xc8/0xd0
[  +0.000000]   common_startup_64+0x13e/0x148
[  +0.000000] irq event stamp: 6884
[  +0.000000] hardirqs last  enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270
[  +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270
[  +0.000000] softirqs last  enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270
[  +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140
[  +0.000000]
              other info that might help us debug this:
[  +0.000000]  Possible unsafe locking scenario:

[  +0.000000]        CPU0
[  +0.000000]        ----
[  +0.000000]   lock(&sch->root_lock_key);
[  +0.000000]   <Interrupt>
[  +0.000000]     lock(&sch->root_lock_key);
[  +0.000000]
               *** DEADLOCK ***

[  +0.000000] 4 locks held by ping/156:
[  +0.000000]  #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40
[  +0.000000]  #1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190
[  +0.000000]  #2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950
[  +0.000000]  #3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140

I am able to reproduce it consistently when running the following:

tc qdisc add dev lo handle 1: root dualpi2
ping -f 127.0.0.1

To fix it, make the timer run in softirq.

Fixes: 320d031 ("sched: Struct definition and parsing of dualpi2 qdisc")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250815135317.664993-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced an IRQ lock inversion
issue. Fix this lock inversion by changing the spin_lock_irq() calls into
spin_lock_irqsave() calls in code that can be called either from
interrupt context or from thread context. This patch fixes the following
lockdep complaint:

WARNING: possible irq lock inversion dependency detected
6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G        W  OE
--------------------------------------------------------
kworker/u28:0/12 just changed the state of lock:
ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110
but this lock took another, HARDIRQ-unsafe lock in the past:
 (shost->host_lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(shost->host_lock);
                               local_irq_disable();
                               lock(&hba->clk_gating.lock);
                               lock(shost->host_lock);
  <Interrupt>
    lock(&hba->clk_gating.lock);

 *** DEADLOCK ***

4 locks held by kworker/u28:0/12:
 #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
 #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
 #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120
 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104

the shortest dependencies between 2nd lock and 1st lock:
 -> (shost->host_lock){+.+.}-{2:2} {
    HARDIRQ-ON-W at:
                      lock_acquire+0x134/0x2b4
                      _raw_spin_lock+0x48/0x64
                      ufshcd_sl_intr+0x4c/0xa08
                      ufshcd_threaded_intr+0x70/0x12c
                      irq_thread_fn+0x48/0xa8
                      irq_thread+0x130/0x1ec
                      kthread+0x110/0x134
                      ret_from_fork+0x10/0x20
    SOFTIRQ-ON-W at:
                      lock_acquire+0x134/0x2b4
                      _raw_spin_lock+0x48/0x64
                      ufshcd_sl_intr+0x4c/0xa08
                      ufshcd_threaded_intr+0x70/0x12c
                      irq_thread_fn+0x48/0xa8
                      irq_thread+0x130/0x1ec
                      kthread+0x110/0x134
                      ret_from_fork+0x10/0x20
    INITIAL USE at:
                     lock_acquire+0x134/0x2b4
                     _raw_spin_lock+0x48/0x64
                     ufshcd_sl_intr+0x4c/0xa08
                     ufshcd_threaded_intr+0x70/0x12c
                     irq_thread_fn+0x48/0xa8
                     irq_thread+0x130/0x1ec
                     kthread+0x110/0x134
                     ret_from_fork+0x10/0x20
  }
  ... key      at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10
  ... acquired at:
   _raw_spin_lock_irqsave+0x5c/0x80
   __ufshcd_release+0x78/0x118
   ufshcd_send_uic_cmd+0xe4/0x118
   ufshcd_dme_set_attr+0x88/0x1c8
   ufs_google_phy_initialization+0x68/0x418 [ufs]
   ufs_google_link_startup_notify+0x78/0x27c [ufs]
   ufshcd_link_startup+0x84/0x720
   ufshcd_init+0xf3c/0x1330
   ufshcd_pltfrm_init+0x728/0x7d8
   ufs_google_probe+0x30/0x84 [ufs]
   platform_probe+0xa0/0xe0
   really_probe+0x114/0x454
   __driver_probe_device+0xa4/0x160
   driver_probe_device+0x44/0x23c
   __driver_attach_async_helper+0x60/0xd4
   async_run_entry_fn+0x4c/0x17c
   process_one_work+0x26c/0x65c
   worker_thread+0x33c/0x498
   kthread+0x110/0x134
   ret_from_fork+0x10/0x20

-> (&hba->clk_gating.lock){-...}-{2:2} {
   IN-HARDIRQ-W at:
                    lock_acquire+0x134/0x2b4
                    _raw_spin_lock_irqsave+0x5c/0x80
                    ufshcd_release_scsi_cmd+0x60/0x110
                    ufshcd_compl_one_cqe+0x2c0/0x3f4
                    ufshcd_mcq_poll_cqe_lock+0xb0/0x104
                    ufs_google_mcq_intr+0x80/0xa0 [ufs]
                    __handle_irq_event_percpu+0x104/0x32c
                    handle_irq_event+0x40/0x9c
                    handle_fasteoi_irq+0x170/0x2e8
                    generic_handle_domain_irq+0x58/0x80
                    gic_handle_irq+0x48/0x104
                    call_on_irq_stack+0x3c/0x50
                    do_interrupt_handler+0x7c/0xd8
                    el1_interrupt+0x34/0x58
                    el1h_64_irq_handler+0x18/0x24
                    el1h_64_irq+0x68/0x6c
                    _raw_spin_unlock_irqrestore+0x3c/0x6c
                    debug_object_assert_init+0x16c/0x21c
                    __mod_timer+0x4c/0x48c
                    schedule_timeout+0xd4/0x16c
                    io_schedule_timeout+0x48/0x70
                    do_wait_for_common+0x100/0x194
                    wait_for_completion_io_timeout+0x48/0x6c
                    blk_execute_rq+0x124/0x17c
                    scsi_execute_cmd+0x18c/0x3f8
                    scsi_probe_and_add_lun+0x204/0xd74
                    __scsi_add_device+0xbc/0x120
                    ufshcd_async_scan+0x80/0x3c0
                    async_run_entry_fn+0x4c/0x17c
                    process_one_work+0x26c/0x65c
                    worker_thread+0x33c/0x498
                    kthread+0x110/0x134
                    ret_from_fork+0x10/0x20
   INITIAL USE at:
                   lock_acquire+0x134/0x2b4
                   _raw_spin_lock_irqsave+0x5c/0x80
                   ufshcd_hold+0x34/0x14c
                   ufshcd_send_uic_cmd+0x28/0x118
                   ufshcd_dme_set_attr+0x88/0x1c8
                   ufs_google_phy_initialization+0x68/0x418 [ufs]
                   ufs_google_link_startup_notify+0x78/0x27c [ufs]
                   ufshcd_link_startup+0x84/0x720
                   ufshcd_init+0xf3c/0x1330
                   ufshcd_pltfrm_init+0x728/0x7d8
                   ufs_google_probe+0x30/0x84 [ufs]
                   platform_probe+0xa0/0xe0
                   really_probe+0x114/0x454
                   __driver_probe_device+0xa4/0x160
                   driver_probe_device+0x44/0x23c
                   __driver_attach_async_helper+0x60/0xd4
                   async_run_entry_fn+0x4c/0x17c
                   process_one_work+0x26c/0x65c
                   worker_thread+0x33c/0x498
                   kthread+0x110/0x134
                   ret_from_fork+0x10/0x20
 }
 ... key      at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10
 ... acquired at:
   mark_lock+0x1c4/0x224
   __lock_acquire+0x438/0x2e1c
   lock_acquire+0x134/0x2b4
   _raw_spin_lock_irqsave+0x5c/0x80
   ufshcd_release_scsi_cmd+0x60/0x110
   ufshcd_compl_one_cqe+0x2c0/0x3f4
   ufshcd_mcq_poll_cqe_lock+0xb0/0x104
   ufs_google_mcq_intr+0x80/0xa0 [ufs]
   __handle_irq_event_percpu+0x104/0x32c
   handle_irq_event+0x40/0x9c
   handle_fasteoi_irq+0x170/0x2e8
   generic_handle_domain_irq+0x58/0x80
   gic_handle_irq+0x48/0x104
   call_on_irq_stack+0x3c/0x50
   do_interrupt_handler+0x7c/0xd8
   el1_interrupt+0x34/0x58
   el1h_64_irq_handler+0x18/0x24
   el1h_64_irq+0x68/0x6c
   _raw_spin_unlock_irqrestore+0x3c/0x6c
   debug_object_assert_init+0x16c/0x21c
   __mod_timer+0x4c/0x48c
   schedule_timeout+0xd4/0x16c
   io_schedule_timeout+0x48/0x70
   do_wait_for_common+0x100/0x194
   wait_for_completion_io_timeout+0x48/0x6c
   blk_execute_rq+0x124/0x17c
   scsi_execute_cmd+0x18c/0x3f8
   scsi_probe_and_add_lun+0x204/0xd74
   __scsi_add_device+0xbc/0x120
   ufshcd_async_scan+0x80/0x3c0
   async_run_entry_fn+0x4c/0x17c
   process_one_work+0x26c/0x65c
   worker_thread+0x33c/0x498
   kthread+0x110/0x134
   ret_from_fork+0x10/0x20

stack backtrace:
CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G        W  OE      6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: async async_run_entry_fn
Call trace:
 dump_backtrace+0xfc/0x17c
 show_stack+0x18/0x28
 dump_stack_lvl+0x40/0xa0
 dump_stack+0x18/0x24
 print_irq_inversion_bug+0x2fc/0x304
 mark_lock_irq+0x388/0x4fc
 mark_lock+0x1c4/0x224
 __lock_acquire+0x438/0x2e1c
 lock_acquire+0x134/0x2b4
 _raw_spin_lock_irqsave+0x5c/0x80
 ufshcd_release_scsi_cmd+0x60/0x110
 ufshcd_compl_one_cqe+0x2c0/0x3f4
 ufshcd_mcq_poll_cqe_lock+0xb0/0x104
 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a]
 __handle_irq_event_percpu+0x104/0x32c
 handle_irq_event+0x40/0x9c
 handle_fasteoi_irq+0x170/0x2e8
 generic_handle_domain_irq+0x58/0x80
 gic_handle_irq+0x48/0x104
 call_on_irq_stack+0x3c/0x50
 do_interrupt_handler+0x7c/0xd8
 el1_interrupt+0x34/0x58
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x68/0x6c
 _raw_spin_unlock_irqrestore+0x3c/0x6c
 debug_object_assert_init+0x16c/0x21c
 __mod_timer+0x4c/0x48c
 schedule_timeout+0xd4/0x16c
 io_schedule_timeout+0x48/0x70
 do_wait_for_common+0x100/0x194
 wait_for_completion_io_timeout+0x48/0x6c
 blk_execute_rq+0x124/0x17c
 scsi_execute_cmd+0x18c/0x3f8
 scsi_probe_and_add_lun+0x204/0xd74
 __scsi_add_device+0xbc/0x120
 ufshcd_async_scan+0x80/0x3c0
 async_run_entry_fn+0x4c/0x17c
 process_one_work+0x26c/0x65c
 worker_thread+0x33c/0x498
 kthread+0x110/0x134
 ret_from_fork+0x10/0x20

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In the snd_utimer_create() function, if the kasprintf() function return
NULL, snd_utimer_put_id() will be called, finally use ida_free()
to free the unallocated id 0.

the syzkaller reported the following information:
  ------------[ cut here ]------------
  ida_free called for id=0 which is not allocated.
  WARNING: CPU: 1 PID: 1286 at lib/idr.c:592 ida_free+0x1fd/0x2f0 lib/idr.c:592
  Modules linked in:
  CPU: 1 UID: 0 PID: 1286 Comm: syz-executor164 Not tainted 6.15.8 #3 PREEMPT(lazy)
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014
  RIP: 0010:ida_free+0x1fd/0x2f0 lib/idr.c:592
  Code: f8 fc 41 83 fc 3e 76 69 e8 70 b2 f8 (...)
  RSP: 0018:ffffc900007f79c8 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: 1ffff920000fef3b RCX: ffffffff872176a5
  RDX: ffff88800369d200 RSI: 0000000000000000 RDI: ffff88800369d200
  RBP: 0000000000000000 R08: ffffffff87ba60a5 R09: 0000000000000000
  R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
  R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000000
  FS:  00007f6f1abc1740(0000) GS:ffff8880d76a0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f6f1ad7a784 CR3: 000000007a6e2000 CR4: 00000000000006f0
  Call Trace:
   <TASK>
   snd_utimer_put_id sound/core/timer.c:2043 [inline] [snd_timer]
   snd_utimer_create+0x59b/0x6a0 sound/core/timer.c:2184 [snd_timer]
   snd_utimer_ioctl_create sound/core/timer.c:2202 [inline] [snd_timer]
   __snd_timer_user_ioctl.isra.0+0x724/0x1340 sound/core/timer.c:2287 [snd_timer]
   snd_timer_user_ioctl+0x75/0xc0 sound/core/timer.c:2298 [snd_timer]
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:907 [inline]
   __se_sys_ioctl fs/ioctl.c:893 [inline]
   __x64_sys_ioctl+0x198/0x200 fs/ioctl.c:893
   do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
   do_syscall_64+0x7b/0x160 arch/x86/entry/syscall_64.c:94
   entry_SYSCALL_64_after_hwframe+0x76/0x7e
  [...]

The utimer->id should be set properly before the kasprintf() function,
ensures the snd_utimer_put_id() function will free the allocated id.

Fixes: 3774591 ("ALSA: timer: Introduce virtual userspace-driven timers")
Signed-off-by: Dewei Meng <mengdewei@cqsoftware.com.cn>
Link: https://patch.msgid.link/20250821014317.40786-1-mengdewei@cqsoftware.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The QuickI2C ACPI _DSD methods return ICRS and ISUB data with a
trailing byte, making the actual length is one more byte than the
structs defined.

It caused stack-out-of-bounds and kernel crash:

kernel: BUG: KASAN: stack-out-of-bounds in quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c]
kernel: Write of size 12 at addr ffff888106d1f900 by task kworker/u33:2/75
kernel:
kernel: CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Not tainted 6.16.0+ #3 PREEMPT(voluntary)
kernel: Workqueue: async async_run_entry_fn
kernel: Call Trace:
kernel:  <TASK>
kernel:  dump_stack_lvl+0x76/0xa0
kernel:  print_report+0xd1/0x660
kernel:  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
kernel:  ? __kasan_slab_free+0x5d/0x80
kernel:  ? kasan_addr_to_slab+0xd/0xb0
kernel:  kasan_report+0xe1/0x120
kernel:  ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c]
kernel:  ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c]
kernel:  kasan_check_range+0x11c/0x200
kernel:  __asan_memcpy+0x3b/0x80
kernel:  quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c]
kernel:  ? __pfx_quicki2c_acpi_get_dsd_property.constprop.0+0x10/0x10 [intel_quicki2c]
kernel:  quicki2c_get_acpi_resources+0x237/0x730 [intel_quicki2c]
[...]
kernel:  </TASK>
kernel:
kernel: The buggy address belongs to stack of task kworker/u33:2/75
kernel:  and is located at offset 48 in frame:
kernel:  quicki2c_get_acpi_resources+0x0/0x730 [intel_quicki2c]
kernel:
kernel: This frame has 3 objects:
kernel:  [32, 36) 'hid_desc_addr'
kernel:  [48, 59) 'i2c_param'
kernel:  [80, 224) 'i2c_config'

ACPI DSD methods return:

\_SB.PC00.THC0.ICRS Buffer       000000003fdc947b 001 Len 0C = 0A 00 80 1A 06 00 00 00 00 00 00 00
\_SB.PC00.THC0.ISUB Buffer       00000000f2fcbdc4 001 Len 91 = 00 00 00 00 00 00 00 00 00 00 00 00

Adding reserved padding to quicki2c_subip_acpi_parameter/config.

Fixes: 5282e45 ("HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C ACPI interfaces")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Tested-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

…C regs save

Improper use of secondary pointer (&dev->i2c_subip_regs) caused
kernel crash and out-of-bounds error:

 BUG: KASAN: slab-out-of-bounds in _regmap_bulk_read+0x449/0x510
 Write of size 4 at addr ffff888136005dc0 by task kworker/u33:5/5107

 CPU: 3 UID: 0 PID: 5107 Comm: kworker/u33:5 Not tainted 6.16.0+ #3 PREEMPT(voluntary)
 Workqueue: async async_run_entry_fn
 Call Trace:
  <TASK>
  dump_stack_lvl+0x76/0xa0
  print_report+0xd1/0x660
  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
  ? kasan_complete_mode_report_info+0x26/0x200
  kasan_report+0xe1/0x120
  ? _regmap_bulk_read+0x449/0x510
  ? _regmap_bulk_read+0x449/0x510
  __asan_report_store4_noabort+0x17/0x30
  _regmap_bulk_read+0x449/0x510
  ? __pfx__regmap_bulk_read+0x10/0x10
  regmap_bulk_read+0x270/0x3d0
  pio_complete+0x1ee/0x2c0 [intel_thc]
  ? __pfx_pio_complete+0x10/0x10 [intel_thc]
  ? __pfx_pio_wait+0x10/0x10 [intel_thc]
  ? regmap_update_bits_base+0x13b/0x1f0
  thc_i2c_subip_pio_read+0x117/0x270 [intel_thc]
  thc_i2c_subip_regs_save+0xc2/0x140 [intel_thc]
  ? __pfx_thc_i2c_subip_regs_save+0x10/0x10 [intel_thc]
[...]
 The buggy address belongs to the object at ffff888136005d00
  which belongs to the cache kmalloc-rnd-12-192 of size 192
 The buggy address is located 0 bytes to the right of
  allocated 192-byte region [ffff888136005d00, ffff888136005dc0)

Replaced with direct array indexing (&dev->i2c_subip_regs[i]) to ensure
safe memory access.

Fixes: 4228966 ("HID: intel-thc-hid: intel-thc: Add THC I2C config interfaces")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Tested-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup() by passing in report descriptor smaller than
607 bytes. mt_report_fixup() attempts to patch byte offset 607
of the descriptor with 0x25 by first checking if byte offset
607 is 0x15 however it lacks bounds checks to verify if the
descriptor is big enough before conducting this check. Fix
this bug by ensuring the descriptor size is at least 608
bytes before accessing it.

Below is the KASAN splat after the out of bounds access happens:

[   13.671954] ==================================================================
[   13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[   13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[   13.673297]
[   13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[   13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[   13.673297] Call Trace:
[   13.673297]  <TASK>
[   13.673297]  dump_stack_lvl+0x5f/0x80
[   13.673297]  print_report+0xd1/0x660
[   13.673297]  kasan_report+0xe5/0x120
[   13.673297]  __asan_report_load1_noabort+0x18/0x20
[   13.673297]  mt_report_fixup+0x103/0x110
[   13.673297]  hid_open_report+0x1ef/0x810
[   13.673297]  mt_probe+0x422/0x960
[   13.673297]  hid_device_probe+0x2e2/0x6f0
[   13.673297]  really_probe+0x1c6/0x6b0
[   13.673297]  __driver_probe_device+0x24f/0x310
[   13.673297]  driver_probe_device+0x4e/0x220
[   13.673297]  __device_attach_driver+0x169/0x320
[   13.673297]  bus_for_each_drv+0x11d/0x1b0
[   13.673297]  __device_attach+0x1b8/0x3e0
[   13.673297]  device_initial_probe+0x12/0x20
[   13.673297]  bus_probe_device+0x13d/0x180
[   13.673297]  device_add+0xe3a/0x1670
[   13.673297]  hid_add_device+0x31d/0xa40
[...]

Fixes: c8000de ("HID: multitouch: Add support for GT7868Q")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

These iterations require the read lock, otherwise RCU
lockdep will splat:

=============================
WARNING: suspicious RCU usage
6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G           O
-----------------------------
drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/547:
 #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a
 #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b
 #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b
 #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b
 #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98

stack backtrace:
CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G           O        6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY
Tainted: [O]=OOT_MODULE
Stack:
 223721b3a80 6089eac6 00000001 00000001
 ffffff00 6089eac6 00000535 6086e528
 721b3ac0 6003c294 00000000 60031fc0
Call Trace:
 [<600407ed>] show_stack+0x10e/0x127
 [<6003c294>] dump_stack_lvl+0x77/0xc6
 [<6003c2fd>] dump_stack+0x1a/0x20
 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e
 [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e
 [<603d980f>] device_suspend+0x528/0x541
 [<603da24b>] dpm_suspend+0x1a2/0x267
 [<603da837>] dpm_suspend_start+0x5d/0x72
 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736
 [...]

Add the fourth argument to the iteration to annotate
this and avoid the splat.

Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents")
Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When a large VM, specifically one that holds a significant number of PTEs,
gets abruptly destroyed, the following warning is seen during the
page-table walk:

 sched: CPU 0 need_resched set for > 100018840 ns (100 ticks) without schedule
 CPU: 0 UID: 0 PID: 9617 Comm: kvm_page_table_ Tainted: G O 6.16.0-smp-DEV #3 NONE
 Tainted: [O]=OOT_MODULE
 Call trace:
  show_stack+0x20/0x38 (C)
  dump_stack_lvl+0x3c/0xb8
  dump_stack+0x18/0x30
  resched_latency_warn+0x7c/0x88
  sched_tick+0x1c4/0x268
  update_process_times+0xa8/0xd8
  tick_nohz_handler+0xc8/0x168
  __hrtimer_run_queues+0x11c/0x338
  hrtimer_interrupt+0x104/0x308
  arch_timer_handler_phys+0x40/0x58
  handle_percpu_devid_irq+0x8c/0x1b0
  generic_handle_domain_irq+0x48/0x78
  gic_handle_irq+0x1b8/0x408
  call_on_irq_stack+0x24/0x30
  do_interrupt_handler+0x54/0x78
  el1_interrupt+0x44/0x88
  el1h_64_irq_handler+0x18/0x28
  el1h_64_irq+0x84/0x88
  stage2_free_walker+0x30/0xa0 (P)
  __kvm_pgtable_walk+0x11c/0x258
  __kvm_pgtable_walk+0x180/0x258
  __kvm_pgtable_walk+0x180/0x258
  __kvm_pgtable_walk+0x180/0x258
  kvm_pgtable_walk+0xc4/0x140
  kvm_pgtable_stage2_destroy+0x5c/0xf0
  kvm_free_stage2_pgd+0x6c/0xe8
  kvm_uninit_stage2_mmu+0x24/0x48
  kvm_arch_flush_shadow_all+0x80/0xa0
  kvm_mmu_notifier_release+0x38/0x78
  __mmu_notifier_release+0x15c/0x250
  exit_mmap+0x68/0x400
  __mmput+0x38/0x1c8
  mmput+0x30/0x68
  exit_mm+0xd4/0x198
  do_exit+0x1a4/0xb00
  do_group_exit+0x8c/0x120
  get_signal+0x6d4/0x778
  do_signal+0x90/0x718
  do_notify_resume+0x70/0x170
  el0_svc+0x74/0xd8
  el0t_64_sync_handler+0x60/0xc8
  el0t_64_sync+0x1b0/0x1b8

The warning is seen majorly on the host kernels that are configured
not to force-preempt, such as CONFIG_PREEMPT_NONE=y. To avoid this,
instead of walking the entire page-table in one go, split it into
smaller ranges, by checking for cond_resched() between each range.
Since the path is executed during VM destruction, after the
page-table structure is unlinked from the KVM MMU, relying on
cond_resched_rwlock_write() isn't necessary.

Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250820162242.2624752-3-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>

When the "proxy" option is enabled on a VXLAN device, the device will
suppress ARP requests and IPv6 Neighbor Solicitation messages if it is
able to reply on behalf of the remote host. That is, if a matching and
valid neighbor entry is configured on the VXLAN device whose MAC address
is not behind the "any" remote (0.0.0.0 / ::).

The code currently assumes that the FDB entry for the neighbor's MAC
address points to a valid remote destination, but this is incorrect if
the entry is associated with an FDB nexthop group. This can result in a
NPD [1][3] which can be reproduced using [2][4].

Fix by checking that the remote destination exists before dereferencing
it.

[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_xmit+0xb58/0x15f0
[...]
Call Trace:
 <TASK>
 dev_hard_start_xmit+0x5d/0x1c0
 __dev_queue_xmit+0x246/0xfd0
 packet_sendmsg+0x113a/0x1850
 __sock_sendmsg+0x38/0x70
 __sys_sendto+0x126/0x180
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0xa4/0x260
 entry_SYSCALL_64_after_hwframe+0x4b/0x53

[2]
 #!/bin/bash

 ip address add 192.0.2.1/32 dev lo

 ip nexthop add id 1 via 192.0.2.2 fdb
 ip nexthop add id 10 group 1 fdb

 ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy

 ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0

 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10

 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3

[3]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014
RIP: 0010:vxlan_xmit+0x803/0x1600
[...]
Call Trace:
 <TASK>
 dev_hard_start_xmit+0x5d/0x1c0
 __dev_queue_xmit+0x246/0xfd0
 ip6_finish_output2+0x210/0x6c0
 ip6_finish_output+0x1af/0x2b0
 ip6_mr_output+0x92/0x3e0
 ip6_send_skb+0x30/0x90
 rawv6_sendmsg+0xe6e/0x12e0
 __sock_sendmsg+0x38/0x70
 __sys_sendto+0x126/0x180
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0xa4/0x260
 entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f383422ec77

[4]
 #!/bin/bash

 ip address add 2001:db8:1::1/128 dev lo

 ip nexthop add id 1 via 2001:db8:1::1 fdb
 ip nexthop add id 10 group 1 fdb

 ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy

 ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0

 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10

 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0

Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
vxlan: Fix NPDs when using nexthop objects

With FDB nexthop groups, VXLAN FDB entries do not necessarily point to
a remote destination but rather to an FDB nexthop group. This means that
first_remote_{rcu,rtnl}() can return NULL and a few places in the driver
were not ready for that, resulting in NULL pointer dereferences.
Patches #1-#2 fix these NPDs.

Note that vxlan_fdb_find_uc() still dereferences the remote returned by
first_remote_rcu() without checking that it is not NULL, but this
function is only invoked by a single driver which vetoes the creation of
FDB nexthop groups. I will patch this in net-next to make the code less
fragile.

Patch #3 adds a selftests which exercises these code paths and tests
basic Tx functionality with FDB nexthop groups. I verified that the test
crashes the kernel without the first two patches.
====================

Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When transmitting a PTP frame which is timestamp using 2 step, the
following warning appears if CONFIG_PROVE_LOCKING is enabled:
=============================
[ BUG: Invalid wait context ]
6.17.0-rc1-00326-ge6160462704e #427 Not tainted
-----------------------------
ptp4l/119 is trying to lock:
c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac
other info that might help us debug this:
context-{4:4}
4 locks held by ptp4l/119:
 #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440
 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440
 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350
 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350
stack backtrace:
CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE
Hardware name: Generic DT based system
Call trace:
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x7c/0xac
 dump_stack_lvl from __lock_acquire+0x8e8/0x29dc
 __lock_acquire from lock_acquire+0x108/0x38c
 lock_acquire from __mutex_lock+0xb0/0xe78
 __mutex_lock from mutex_lock_nested+0x1c/0x24
 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac
 vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8
 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350
 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0
 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350
 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440
 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568
 packet_sendmsg from __sys_sendto+0x110/0x19c
 __sys_sendto from sys_send+0x18/0x20
 sys_send from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b05fa8 to 0xf0b05ff0)
5fa0:                   00000001 0000000 0000000 0004b47a 0000003a 00000000
5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000
5fe0: 00000001 bee9d420 00025a10 b6e75c7c

So, instead of using the ts_lock for tx_queue, use the spinlock that
skb_buff_head has.

Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>