up #311
Closed
up #311
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Linux 3.14-rc5
Linux 3.14-rc7
Linux 3.14-rc8
Linux 3.14
Linux 3.15-rc2
Linux 3.15-rc4
Linux 3.16-rc1
Linux 3.16-rc2
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Apr 8, 2021
…format
For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.
Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
After fix:
< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345
Handle: 256
Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
May 7, 2021
…format
For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.
Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
After fix:
< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345
Handle: 256
Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
roxell
pushed a commit
to roxell/linux
that referenced
this pull request
May 10, 2021
…format
For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.
Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
After fix:
< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345
Handle: 256
Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
nbdd0121
pushed a commit
to nbdd0121/linux
that referenced
this pull request
May 29, 2021
Define a file descriptor reservation/commit/rollback abstraction.
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jun 28, 2021
…format
For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.
Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
After fix:
< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345
Handle: 256
Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
intersectRaven
pushed a commit
to intersectRaven/linux
that referenced
this pull request
Jul 19, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
damentz
referenced
this pull request
in zen-kernel/zen-kernel
Jul 19, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
repojohnray
pushed a commit
to repojohnray/linux-sunxi-4.7.y
that referenced
this pull request
Jul 19, 2021
…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 linux-sunxi#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
akiernan
pushed a commit
to zuma-array/linux
that referenced
this pull request
Nov 4, 2022
PD#150075: driver defect clean up: vdac_dev.c: #5 torvalds#6 torvalds#876 tv_vout.c: torvalds#181 torvalds#267 torvalds#311 torvalds#312 torvalds#313 torvalds#314 torvalds#315 torvalds#532 torvalds#605 Change-Id: I185072efb68df1abdad036a21867bb64efca914c Signed-off-by: Nian Jing <nian.jing@amlogic.com>
JIaxyga
pushed a commit
to sm8450-mainline/linux
that referenced
this pull request
Feb 5, 2024
…_locked The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gnoack
pushed a commit
to gnoack/linux
that referenced
this pull request
Feb 9, 2024
…_locked The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
staging-kernelci-org
pushed a commit
to kernelci/linux
that referenced
this pull request
Feb 23, 2024
…_locked commit ccb88e9 upstream. The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RevySR
pushed a commit
to revyos/th1520-linux-kernel
that referenced
this pull request
Feb 23, 2024
…_locked commit ccb88e9 upstream. The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RevySR
pushed a commit
to revyos/th1520-linux-kernel
that referenced
this pull request
Feb 23, 2024
…_locked commit ccb88e9 upstream. The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Feb 23, 2024
…_locked commit ccb88e9 upstream. The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Feb 23, 2024
…_locked commit ccb88e9 upstream. The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeroReflex
pushed a commit
to NeroReflex/linux
that referenced
this pull request
Mar 3, 2024
…_locked commit ccb88e9 upstream. The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [ChimeraOS#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Apr 17, 2025
Dave Hansen reports the following crash on a 32-bit system with CONFIG_HIGHMEM=y and CONFIG_X86_PAE=y: > 0xf75fe000 is the mem_map[] entry for the first page >4GB. It > obviously wasn't allocated, thus the oops. BUG: unable to handle page fault for address: f75fe000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pdpt = 0000000002da2001 *pde = 000000000300c067 *pte = 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc1-00288-ge618ee89561b-dirty torvalds#311 PREEMPT(undef) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 EIP: __free_pages_core+0x3c/0x74 ... Call Trace: memblock_free_pages+0x11/0x2c memblock_free_all+0x2ce/0x3a0 mm_core_init+0xf5/0x320 start_kernel+0x296/0x79c i386_start_kernel+0xad/0xb0 startup_32_smp+0x151/0x154 The mem_map[] is allocated up to the end of ZONE_HIGHMEM which is defined by max_pfn. The bug was introduced by this recent commit: 6faea34 ("arch, mm: streamline HIGHMEM freeing") Previously, freeing of high memory was also clamped to the end of ZONE_HIGHMEM but after this change, memblock_free_all() tries to free memory above the of ZONE_HIGHMEM as well and that causes access to mem_map[] entries beyond the end of the memory map. To fix this, discard the memory after max_pfn from memblock on 32-bit systems so that core MM would be aware only of actually usable memory. [ mingo: Fixed build failure. ] Fixes: 6faea34 ("arch, mm: streamline HIGHMEM freeing") Reported-by: Dave Hansen <dave.hansen@intel.com> Tested-by: Arnd Bergmann <arnd@kernel.org> Tested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Andy Shevchenko <andy@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davide Ciminaghi <ciminaghi@gnudd.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20250413080858.743221-1-rppt@kernel.org
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Apr 21, 2025
Dave Hansen reports the following crash on a 32-bit system with CONFIG_HIGHMEM=y and CONFIG_X86_PAE=y: > 0xf75fe000 is the mem_map[] entry for the first page >4GB. It > obviously wasn't allocated, thus the oops. BUG: unable to handle page fault for address: f75fe000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pdpt = 0000000002da2001 *pde = 000000000300c067 *pte = 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc1-00288-ge618ee89561b-dirty torvalds#311 PREEMPT(undef) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 EIP: __free_pages_core+0x3c/0x74 ... Call Trace: memblock_free_pages+0x11/0x2c memblock_free_all+0x2ce/0x3a0 mm_core_init+0xf5/0x320 start_kernel+0x296/0x79c i386_start_kernel+0xad/0xb0 startup_32_smp+0x151/0x154 The mem_map[] is allocated up to the end of ZONE_HIGHMEM which is defined by max_pfn. The bug was introduced by this recent commit: 6faea34 ("arch, mm: streamline HIGHMEM freeing") Previously, freeing of high memory was also clamped to the end of ZONE_HIGHMEM but after this change, memblock_free_all() tries to free memory above the of ZONE_HIGHMEM as well and that causes access to mem_map[] entries beyond the end of the memory map. To fix this, discard the memory after max_pfn from memblock on 32-bit systems so that core MM would be aware only of actually usable memory. Fixes: 6faea34 ("arch, mm: streamline HIGHMEM freeing") Reported-by: Dave Hansen <dave.hansen@intel.com> Tested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andy@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davide Ciminaghi <ciminaghi@gnudd.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20250413080858.743221-1-rppt@kernel.org # discussion and submission
tt-fustini
pushed a commit
to tenstorrent/linux
that referenced
this pull request
May 2, 2025
Dave Hansen reports the following crash on a 32-bit system with CONFIG_HIGHMEM=y and CONFIG_X86_PAE=y: > 0xf75fe000 is the mem_map[] entry for the first page >4GB. It > obviously wasn't allocated, thus the oops. BUG: unable to handle page fault for address: f75fe000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pdpt = 0000000002da2001 *pde = 000000000300c067 *pte = 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc1-00288-ge618ee89561b-dirty torvalds#311 PREEMPT(undef) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 EIP: __free_pages_core+0x3c/0x74 ... Call Trace: memblock_free_pages+0x11/0x2c memblock_free_all+0x2ce/0x3a0 mm_core_init+0xf5/0x320 start_kernel+0x296/0x79c i386_start_kernel+0xad/0xb0 startup_32_smp+0x151/0x154 The mem_map[] is allocated up to the end of ZONE_HIGHMEM which is defined by max_pfn. The bug was introduced by this recent commit: 6faea34 ("arch, mm: streamline HIGHMEM freeing") Previously, freeing of high memory was also clamped to the end of ZONE_HIGHMEM but after this change, memblock_free_all() tries to free memory above the of ZONE_HIGHMEM as well and that causes access to mem_map[] entries beyond the end of the memory map. To fix this, discard the memory after max_pfn from memblock on 32-bit systems so that core MM would be aware only of actually usable memory. Fixes: 6faea34 ("arch, mm: streamline HIGHMEM freeing") Reported-by: Dave Hansen <dave.hansen@intel.com> Tested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andy@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Davide Ciminaghi <ciminaghi@gnudd.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20250413080858.743221-1-rppt@kernel.org # discussion and submission
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Aug 6, 2025
The kernel will have below dump when system resume if the USB net device was already disconnected during system suspend. [ 46.392207] ------------[ cut here ]------------ [ 46.392216] called from state HALTED [ 46.392255] WARNING: CPU: 0 PID: 56 at drivers/net/phy/phy.c:1630 phy_stop+0x12c/0x194 [ 46.392272] Modules linked in: [ 46.392281] CPU: 0 UID: 0 PID: 56 Comm: kworker/0:3 Not tainted 6.15.0-rc7-next-20250523-06664-ga6888feb9f45-dirty torvalds#311 PREEMPT [ 46.392287] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 46.392291] Workqueue: usb_hub_wq hub_event [ 46.392301] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 46.392306] pc : phy_stop+0x12c/0x194 [ 46.392311] lr : phy_stop+0x12c/0x194 [ 46.392315] sp : ffff8000828fb720 [ 46.392317] x29: ffff8000828fb720 x28: ffff000005558b50 x27: ffff00000555b400 [ 46.392324] x26: ffff000004e4f000 x25: ffff00000557f800 x24: 0000000000000000 [ 46.392331] x23: 0000000000000000 x22: ffff8000817eea10 x21: ffff000004fc5000 [ 46.392338] x20: ffff000004fc5a00 x19: ffff0000056eb000 x18: fffffffffffeb3c0 [ 46.392345] x17: ffff7ffffdc3c000 x16: ffff800080000000 x15: 0000000000000000 [ 46.392352] x14: 0000000000000000 x13: 206574617473206d x12: ffff800082057068 [ 46.392359] x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082057068 [ 46.392366] x8 : 0000000000000264 x7 : ffff8000820af068 x6 : ffff8000820af068 [ 46.392373] x5 : ffff00007fb80308 x4 : 0000000000000000 x3 : ffff7ffffdc3c000 [ 46.392379] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000004ed4600 [ 46.392386] Call trace: [ 46.392390] phy_stop+0x12c/0x194 (P) [ 46.392396] phylink_stop+0x28/0x114 [ 46.392404] ax88772_stop+0x18/0x28 [ 46.392411] usbnet_stop+0x80/0x230 [ 46.392418] __dev_close_many+0xb4/0x1e0 [ 46.392427] dev_close_many+0x88/0x140 [ 46.392434] unregister_netdevice_many_notify+0x1b8/0xa10 [ 46.392440] unregister_netdevice_queue+0xe0/0xe8 [ 46.392445] unregister_netdev+0x24/0x50 [ 46.392450] usbnet_disconnect+0x50/0x124 [ 46.392457] usb_unbind_interface+0x78/0x2b4 [ 46.392463] device_remove+0x70/0x80 [ 46.392470] device_release_driver_internal+0x1cc/0x224 [ 46.392475] device_release_driver+0x18/0x30 [ 46.392480] bus_remove_device+0xc8/0x108 [ 46.392488] device_del+0x14c/0x420 [ 46.392495] usb_disable_device+0xe4/0x1c0 [ 46.392502] usb_disconnect+0xd8/0x2ac [ 46.392508] hub_event+0x91c/0x1580 [ 46.392514] process_one_work+0x148/0x290 [ 46.392523] worker_thread+0x2c8/0x3e4 [ 46.392530] kthread+0x12c/0x204 [ 46.392536] ret_from_fork+0x10/0x20 [ 46.392545] ---[ end trace 0000000000000000 ]--- It's because usb_resume_interface() will be skipped if the USB core found the USB device was already disconnected. In this case, asix_resume() will not be called anymore. So asix_suspend/resume() can't be balanced. When ax88772_stop() is called, the phy device was already stopped. To avoid calling phylink_stop() a second time, check whether usb net device is already in suspend state. Fixes: e0bffe3 ("net: asix: ax88772: migrate to phylink") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Aug 6, 2025
The kernel will have below dump when system resume if the USB net device was already disconnected during system suspend. [ 46.392207] ------------[ cut here ]------------ [ 46.392216] called from state HALTED [ 46.392255] WARNING: CPU: 0 PID: 56 at drivers/net/phy/phy.c:1630 phy_stop+0x12c/0x194 [ 46.392272] Modules linked in: [ 46.392281] CPU: 0 UID: 0 PID: 56 Comm: kworker/0:3 Not tainted 6.15.0-rc7-next-20250523-06664-ga6888feb9f45-dirty torvalds#311 PREEMPT [ 46.392287] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 46.392291] Workqueue: usb_hub_wq hub_event [ 46.392301] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 46.392306] pc : phy_stop+0x12c/0x194 [ 46.392311] lr : phy_stop+0x12c/0x194 [ 46.392315] sp : ffff8000828fb720 [ 46.392317] x29: ffff8000828fb720 x28: ffff000005558b50 x27: ffff00000555b400 [ 46.392324] x26: ffff000004e4f000 x25: ffff00000557f800 x24: 0000000000000000 [ 46.392331] x23: 0000000000000000 x22: ffff8000817eea10 x21: ffff000004fc5000 [ 46.392338] x20: ffff000004fc5a00 x19: ffff0000056eb000 x18: fffffffffffeb3c0 [ 46.392345] x17: ffff7ffffdc3c000 x16: ffff800080000000 x15: 0000000000000000 [ 46.392352] x14: 0000000000000000 x13: 206574617473206d x12: ffff800082057068 [ 46.392359] x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082057068 [ 46.392366] x8 : 0000000000000264 x7 : ffff8000820af068 x6 : ffff8000820af068 [ 46.392373] x5 : ffff00007fb80308 x4 : 0000000000000000 x3 : ffff7ffffdc3c000 [ 46.392379] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000004ed4600 [ 46.392386] Call trace: [ 46.392390] phy_stop+0x12c/0x194 (P) [ 46.392396] phylink_stop+0x28/0x114 [ 46.392404] ax88772_stop+0x18/0x28 [ 46.392411] usbnet_stop+0x80/0x230 [ 46.392418] __dev_close_many+0xb4/0x1e0 [ 46.392427] dev_close_many+0x88/0x140 [ 46.392434] unregister_netdevice_many_notify+0x1b8/0xa10 [ 46.392440] unregister_netdevice_queue+0xe0/0xe8 [ 46.392445] unregister_netdev+0x24/0x50 [ 46.392450] usbnet_disconnect+0x50/0x124 [ 46.392457] usb_unbind_interface+0x78/0x2b4 [ 46.392463] device_remove+0x70/0x80 [ 46.392470] device_release_driver_internal+0x1cc/0x224 [ 46.392475] device_release_driver+0x18/0x30 [ 46.392480] bus_remove_device+0xc8/0x108 [ 46.392488] device_del+0x14c/0x420 [ 46.392495] usb_disable_device+0xe4/0x1c0 [ 46.392502] usb_disconnect+0xd8/0x2ac [ 46.392508] hub_event+0x91c/0x1580 [ 46.392514] process_one_work+0x148/0x290 [ 46.392523] worker_thread+0x2c8/0x3e4 [ 46.392530] kthread+0x12c/0x204 [ 46.392536] ret_from_fork+0x10/0x20 [ 46.392545] ---[ end trace 0000000000000000 ]--- It's because usb_resume_interface() will be skipped if the USB core found the USB device was already disconnected. In this case, asix_resume() will not be called anymore. So asix_suspend/resume() can't be balanced. When ax88772_stop() is called, the phy device was already stopped. To avoid calling phylink_stop() a second time, check whether usb net device is already in suspend state. Fixes: e0bffe3 ("net: asix: ax88772: migrate to phylink") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Aug 6, 2025
The kernel will have below dump when system resume if the USB net device was already disconnected during system suspend. [ 46.392207] ------------[ cut here ]------------ [ 46.392216] called from state HALTED [ 46.392255] WARNING: CPU: 0 PID: 56 at drivers/net/phy/phy.c:1630 phy_stop+0x12c/0x194 [ 46.392272] Modules linked in: [ 46.392281] CPU: 0 UID: 0 PID: 56 Comm: kworker/0:3 Not tainted 6.15.0-rc7-next-20250523-06664-ga6888feb9f45-dirty torvalds#311 PREEMPT [ 46.392287] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 46.392291] Workqueue: usb_hub_wq hub_event [ 46.392301] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 46.392306] pc : phy_stop+0x12c/0x194 [ 46.392311] lr : phy_stop+0x12c/0x194 [ 46.392315] sp : ffff8000828fb720 [ 46.392317] x29: ffff8000828fb720 x28: ffff000005558b50 x27: ffff00000555b400 [ 46.392324] x26: ffff000004e4f000 x25: ffff00000557f800 x24: 0000000000000000 [ 46.392331] x23: 0000000000000000 x22: ffff8000817eea10 x21: ffff000004fc5000 [ 46.392338] x20: ffff000004fc5a00 x19: ffff0000056eb000 x18: fffffffffffeb3c0 [ 46.392345] x17: ffff7ffffdc3c000 x16: ffff800080000000 x15: 0000000000000000 [ 46.392352] x14: 0000000000000000 x13: 206574617473206d x12: ffff800082057068 [ 46.392359] x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082057068 [ 46.392366] x8 : 0000000000000264 x7 : ffff8000820af068 x6 : ffff8000820af068 [ 46.392373] x5 : ffff00007fb80308 x4 : 0000000000000000 x3 : ffff7ffffdc3c000 [ 46.392379] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000004ed4600 [ 46.392386] Call trace: [ 46.392390] phy_stop+0x12c/0x194 (P) [ 46.392396] phylink_stop+0x28/0x114 [ 46.392404] ax88772_stop+0x18/0x28 [ 46.392411] usbnet_stop+0x80/0x230 [ 46.392418] __dev_close_many+0xb4/0x1e0 [ 46.392427] dev_close_many+0x88/0x140 [ 46.392434] unregister_netdevice_many_notify+0x1b8/0xa10 [ 46.392440] unregister_netdevice_queue+0xe0/0xe8 [ 46.392445] unregister_netdev+0x24/0x50 [ 46.392450] usbnet_disconnect+0x50/0x124 [ 46.392457] usb_unbind_interface+0x78/0x2b4 [ 46.392463] device_remove+0x70/0x80 [ 46.392470] device_release_driver_internal+0x1cc/0x224 [ 46.392475] device_release_driver+0x18/0x30 [ 46.392480] bus_remove_device+0xc8/0x108 [ 46.392488] device_del+0x14c/0x420 [ 46.392495] usb_disable_device+0xe4/0x1c0 [ 46.392502] usb_disconnect+0xd8/0x2ac [ 46.392508] hub_event+0x91c/0x1580 [ 46.392514] process_one_work+0x148/0x290 [ 46.392523] worker_thread+0x2c8/0x3e4 [ 46.392530] kthread+0x12c/0x204 [ 46.392536] ret_from_fork+0x10/0x20 [ 46.392545] ---[ end trace 0000000000000000 ]--- It's because usb_resume_interface() will be skipped if the USB core found the USB device was already disconnected. In this case, asix_resume() will not be called anymore. So asix_suspend/resume() can't be balanced. When ax88772_stop() is called, the phy device was already stopped. To avoid calling phylink_stop() a second time, check whether usb net device is already in suspend state. Fixes: e0bffe3 ("net: asix: ax88772: migrate to phylink") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Aug 6, 2025
The kernel will have below dump when system resume if the USB net device was already disconnected during system suspend. [ 46.392207] ------------[ cut here ]------------ [ 46.392216] called from state HALTED [ 46.392255] WARNING: CPU: 0 PID: 56 at drivers/net/phy/phy.c:1630 phy_stop+0x12c/0x194 [ 46.392272] Modules linked in: [ 46.392281] CPU: 0 UID: 0 PID: 56 Comm: kworker/0:3 Not tainted 6.15.0-rc7-next-20250523-06664-ga6888feb9f45-dirty torvalds#311 PREEMPT [ 46.392287] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 46.392291] Workqueue: usb_hub_wq hub_event [ 46.392301] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 46.392306] pc : phy_stop+0x12c/0x194 [ 46.392311] lr : phy_stop+0x12c/0x194 [ 46.392315] sp : ffff8000828fb720 [ 46.392317] x29: ffff8000828fb720 x28: ffff000005558b50 x27: ffff00000555b400 [ 46.392324] x26: ffff000004e4f000 x25: ffff00000557f800 x24: 0000000000000000 [ 46.392331] x23: 0000000000000000 x22: ffff8000817eea10 x21: ffff000004fc5000 [ 46.392338] x20: ffff000004fc5a00 x19: ffff0000056eb000 x18: fffffffffffeb3c0 [ 46.392345] x17: ffff7ffffdc3c000 x16: ffff800080000000 x15: 0000000000000000 [ 46.392352] x14: 0000000000000000 x13: 206574617473206d x12: ffff800082057068 [ 46.392359] x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082057068 [ 46.392366] x8 : 0000000000000264 x7 : ffff8000820af068 x6 : ffff8000820af068 [ 46.392373] x5 : ffff00007fb80308 x4 : 0000000000000000 x3 : ffff7ffffdc3c000 [ 46.392379] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000004ed4600 [ 46.392386] Call trace: [ 46.392390] phy_stop+0x12c/0x194 (P) [ 46.392396] phylink_stop+0x28/0x114 [ 46.392404] ax88772_stop+0x18/0x28 [ 46.392411] usbnet_stop+0x80/0x230 [ 46.392418] __dev_close_many+0xb4/0x1e0 [ 46.392427] dev_close_many+0x88/0x140 [ 46.392434] unregister_netdevice_many_notify+0x1b8/0xa10 [ 46.392440] unregister_netdevice_queue+0xe0/0xe8 [ 46.392445] unregister_netdev+0x24/0x50 [ 46.392450] usbnet_disconnect+0x50/0x124 [ 46.392457] usb_unbind_interface+0x78/0x2b4 [ 46.392463] device_remove+0x70/0x80 [ 46.392470] device_release_driver_internal+0x1cc/0x224 [ 46.392475] device_release_driver+0x18/0x30 [ 46.392480] bus_remove_device+0xc8/0x108 [ 46.392488] device_del+0x14c/0x420 [ 46.392495] usb_disable_device+0xe4/0x1c0 [ 46.392502] usb_disconnect+0xd8/0x2ac [ 46.392508] hub_event+0x91c/0x1580 [ 46.392514] process_one_work+0x148/0x290 [ 46.392523] worker_thread+0x2c8/0x3e4 [ 46.392530] kthread+0x12c/0x204 [ 46.392536] ret_from_fork+0x10/0x20 [ 46.392545] ---[ end trace 0000000000000000 ]--- It's because usb_resume_interface() will be skipped if the USB core found the USB device was already disconnected. In this case, asix_resume() will not be called anymore. So asix_suspend/resume() can't be balanced. When ax88772_stop() is called, the phy device was already stopped. To avoid calling phylink_stop() a second time, check whether usb net device is already in suspend state. Fixes: e0bffe3 ("net: asix: ax88772: migrate to phylink") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Aug 6, 2025
The kernel will have below dump when system resume if the USB net device was already disconnected during system suspend. [ 46.392207] ------------[ cut here ]------------ [ 46.392216] called from state HALTED [ 46.392255] WARNING: CPU: 0 PID: 56 at drivers/net/phy/phy.c:1630 phy_stop+0x12c/0x194 [ 46.392272] Modules linked in: [ 46.392281] CPU: 0 UID: 0 PID: 56 Comm: kworker/0:3 Not tainted 6.15.0-rc7-next-20250523-06664-ga6888feb9f45-dirty torvalds#311 PREEMPT [ 46.392287] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 46.392291] Workqueue: usb_hub_wq hub_event [ 46.392301] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 46.392306] pc : phy_stop+0x12c/0x194 [ 46.392311] lr : phy_stop+0x12c/0x194 [ 46.392315] sp : ffff8000828fb720 [ 46.392317] x29: ffff8000828fb720 x28: ffff000005558b50 x27: ffff00000555b400 [ 46.392324] x26: ffff000004e4f000 x25: ffff00000557f800 x24: 0000000000000000 [ 46.392331] x23: 0000000000000000 x22: ffff8000817eea10 x21: ffff000004fc5000 [ 46.392338] x20: ffff000004fc5a00 x19: ffff0000056eb000 x18: fffffffffffeb3c0 [ 46.392345] x17: ffff7ffffdc3c000 x16: ffff800080000000 x15: 0000000000000000 [ 46.392352] x14: 0000000000000000 x13: 206574617473206d x12: ffff800082057068 [ 46.392359] x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082057068 [ 46.392366] x8 : 0000000000000264 x7 : ffff8000820af068 x6 : ffff8000820af068 [ 46.392373] x5 : ffff00007fb80308 x4 : 0000000000000000 x3 : ffff7ffffdc3c000 [ 46.392379] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000004ed4600 [ 46.392386] Call trace: [ 46.392390] phy_stop+0x12c/0x194 (P) [ 46.392396] phylink_stop+0x28/0x114 [ 46.392404] ax88772_stop+0x18/0x28 [ 46.392411] usbnet_stop+0x80/0x230 [ 46.392418] __dev_close_many+0xb4/0x1e0 [ 46.392427] dev_close_many+0x88/0x140 [ 46.392434] unregister_netdevice_many_notify+0x1b8/0xa10 [ 46.392440] unregister_netdevice_queue+0xe0/0xe8 [ 46.392445] unregister_netdev+0x24/0x50 [ 46.392450] usbnet_disconnect+0x50/0x124 [ 46.392457] usb_unbind_interface+0x78/0x2b4 [ 46.392463] device_remove+0x70/0x80 [ 46.392470] device_release_driver_internal+0x1cc/0x224 [ 46.392475] device_release_driver+0x18/0x30 [ 46.392480] bus_remove_device+0xc8/0x108 [ 46.392488] device_del+0x14c/0x420 [ 46.392495] usb_disable_device+0xe4/0x1c0 [ 46.392502] usb_disconnect+0xd8/0x2ac [ 46.392508] hub_event+0x91c/0x1580 [ 46.392514] process_one_work+0x148/0x290 [ 46.392523] worker_thread+0x2c8/0x3e4 [ 46.392530] kthread+0x12c/0x204 [ 46.392536] ret_from_fork+0x10/0x20 [ 46.392545] ---[ end trace 0000000000000000 ]--- It's because usb_resume_interface() will be skipped if the USB core found the USB device was already disconnected. In this case, asix_resume() will not be called anymore. So asix_suspend/resume() can't be balanced. When ax88772_stop() is called, the phy device was already stopped. To avoid calling phylink_stop() a second time, check whether usb net device is already in suspend state. Fixes: e0bffe3 ("net: asix: ax88772: migrate to phylink") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: NipaLocal <nipa@local>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Aug 6, 2025
The kernel will have below dump when system resume if the USB net device was already disconnected during system suspend. [ 46.392207] ------------[ cut here ]------------ [ 46.392216] called from state HALTED [ 46.392255] WARNING: CPU: 0 PID: 56 at drivers/net/phy/phy.c:1630 phy_stop+0x12c/0x194 [ 46.392272] Modules linked in: [ 46.392281] CPU: 0 UID: 0 PID: 56 Comm: kworker/0:3 Not tainted 6.15.0-rc7-next-20250523-06664-ga6888feb9f45-dirty torvalds#311 PREEMPT [ 46.392287] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 46.392291] Workqueue: usb_hub_wq hub_event [ 46.392301] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 46.392306] pc : phy_stop+0x12c/0x194 [ 46.392311] lr : phy_stop+0x12c/0x194 [ 46.392315] sp : ffff8000828fb720 [ 46.392317] x29: ffff8000828fb720 x28: ffff000005558b50 x27: ffff00000555b400 [ 46.392324] x26: ffff000004e4f000 x25: ffff00000557f800 x24: 0000000000000000 [ 46.392331] x23: 0000000000000000 x22: ffff8000817eea10 x21: ffff000004fc5000 [ 46.392338] x20: ffff000004fc5a00 x19: ffff0000056eb000 x18: fffffffffffeb3c0 [ 46.392345] x17: ffff7ffffdc3c000 x16: ffff800080000000 x15: 0000000000000000 [ 46.392352] x14: 0000000000000000 x13: 206574617473206d x12: ffff800082057068 [ 46.392359] x11: 0000000000000058 x10: 0000000000000018 x9 : ffff800082057068 [ 46.392366] x8 : 0000000000000264 x7 : ffff8000820af068 x6 : ffff8000820af068 [ 46.392373] x5 : ffff00007fb80308 x4 : 0000000000000000 x3 : ffff7ffffdc3c000 [ 46.392379] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000004ed4600 [ 46.392386] Call trace: [ 46.392390] phy_stop+0x12c/0x194 (P) [ 46.392396] phylink_stop+0x28/0x114 [ 46.392404] ax88772_stop+0x18/0x28 [ 46.392411] usbnet_stop+0x80/0x230 [ 46.392418] __dev_close_many+0xb4/0x1e0 [ 46.392427] dev_close_many+0x88/0x140 [ 46.392434] unregister_netdevice_many_notify+0x1b8/0xa10 [ 46.392440] unregister_netdevice_queue+0xe0/0xe8 [ 46.392445] unregister_netdev+0x24/0x50 [ 46.392450] usbnet_disconnect+0x50/0x124 [ 46.392457] usb_unbind_interface+0x78/0x2b4 [ 46.392463] device_remove+0x70/0x80 [ 46.392470] device_release_driver_internal+0x1cc/0x224 [ 46.392475] device_release_driver+0x18/0x30 [ 46.392480] bus_remove_device+0xc8/0x108 [ 46.392488] device_del+0x14c/0x420 [ 46.392495] usb_disable_device+0xe4/0x1c0 [ 46.392502] usb_disconnect+0xd8/0x2ac [ 46.392508] hub_event+0x91c/0x1580 [ 46.392514] process_one_work+0x148/0x290 [ 46.392523] worker_thread+0x2c8/0x3e4 [ 46.392530] kthread+0x12c/0x204 [ 46.392536] ret_from_fork+0x10/0x20 [ 46.392545] ---[ end trace 0000000000000000 ]--- It's because usb_resume_interface() will be skipped if the USB core found the USB device was already disconnected. In this case, asix_resume() will not be called anymore. So asix_suspend/resume() can't be balanced. When ax88772_stop() is called, the phy device was already stopped. To avoid calling phylink_stop() a second time, check whether usb net device is already in suspend state. Fixes: e0bffe3 ("net: asix: ax88772: migrate to phylink") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
up