diff --git a/v28.1/share/examples/bitcoin.conf b/32046/share/examples/bitcoin.conf
index a8dfc27..5b0003b 100644
--- a/v28.1/share/examples/bitcoin.conf
+++ b/32046/share/examples/bitcoin.conf
@@ -12,82 +12,6 @@
 ### Options
 
 
-# Execute command when an alert is raised (%s in cmd is replaced by
-# message)
-#alertnotify=<cmd>
-
-# For backwards compatibility, treat an unused bitcoin.conf file in the
-# datadir as a warning, not an error.
-#allowignoredconf=1
-
-# If this block is in the chain assume that it and its ancestors are valid
-# and potentially skip their script verification (0 to verify all,
-# default:
-# 000000000000000000011c5890365bdbe5d25b97ce0057589acaef4f1a57263f,
-# testnet3:
-# 000000000000000465b1a66c9f386308e8c75acef9201f3f577811da09fc90ad,
-# testnet4:
-# 000000005be348057db991fa5d89fe7c4695b667cfb311391a8db374b6f681fd,
-# signet:
-# 0000014aad1d58dddcb964dd749b073374c6306e716b22f573a2efe68d414539)
-#assumevalid=<hex>
-
-# Maintain an index of compact filters by block (default: 0, values:
-# basic). If <type> is not supplied or if <type> = 1, indexes for
-# all known types are enabled.
-#blockfilterindex=<type>
-
-# Execute command when the best block changes (%s in cmd is replaced by
-# block hash)
-#blocknotify=<cmd>
-
-# Extra transactions to keep in memory for compact block reconstructions
-# (default: 100)
-#blockreconstructionextratxn=<n>
-
-# Specify directory to hold blocks subdirectory for *.dat files (default:
-# <datadir>)
-#blocksdir=<dir>
-
-# Whether to reject transactions from network peers. Disables automatic
-# broadcast and rebroadcast of transactions, unless the source peer
-# has the 'forcerelay' permission. RPC transactions are not
-# affected. (default: 0)
-#blocksonly=1
-
-# Whether an XOR-key applies to blocksdir *.dat files. The created XOR-key
-# will be zeros for an existing blocksdir or when `-blocksxor=0` is
-# set, and random for a freshly initialized blocksdir. (default: 1)
-#blocksxor=1
-
-# Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0)
-#coinstatsindex=1
-
-# Specify path to read-only configuration file. Relative paths will be
-# prefixed by datadir location (only useable from command line, not
-# configuration file) (default: bitcoin.conf)
-#conf=<file>
-
-# Run in the background as a daemon and accept commands (default: 0)
-#daemon=1
-
-# Wait for initialization to be finished before exiting. This implies
-# -daemon (default: 0)
-#daemonwait=1
-
-# Specify data directory
-#datadir=<dir>
-
-# Maximum database cache size <n> MiB (4 to 16384, default: 450). In
-# addition, unused mempool memory is shared for this cache (see
-# -maxmempool).
-#dbcache=<n>
-
-# Specify location of debug log file (default: debug.log). Relative paths
-# will be prefixed by a net-specific datadir location. Pass
-# -nodebuglogfile to disable writing the log to a file.
-#debuglogfile=<file>
-
 # Specify additional configuration file, relative to the -datadir path
 # (only useable from configuration file, not command line)
 #includeconf=<file>
@@ -263,7 +187,7 @@
 # base while uppercase is 1024 base
 #maxuploadtarget=<n>
 
-# Use NAT-PMP to map the listening port (default: 0)
+# Use PCP or NAT-PMP to map the listening port (default: 0)
 #natpmp=1
 
 # Enable all P2P network activity (default: 1). Can be changed by the
@@ -321,9 +245,6 @@
 # Tor control port password (default: empty)
 #torpassword=<pass>
 
-# Use UPnP to map the listening port (default: 0)
-#upnp=1
-
 # Support v2 transport (default: 1)
 #v2transport=1
 
@@ -586,10 +507,6 @@
 # this size or less (default: 83)
 #datacarriersize=1
 
-# (DEPRECATED) Accept transaction replace-by-fee without requiring
-# replaceability signaling (default: 1)
-#mempoolfullrbf=1
-
 # Fees (in BTC/kvB) smaller than this are considered zero fee for
 # relaying, mining and transaction creation (default: 0.00001)
 #minrelaytxfee=<amt>
@@ -611,13 +528,18 @@
 ### Block creation options
 
 
-# Set maximum BIP141 block weight (default: 3996000)
+# Set maximum BIP141 block weight (default: 4000000)
 #blockmaxweight=<n>
 
 # Set lowest fee rate (in BTC/kvB) for transactions to be included in
 # block creation. (default: 0.00001)
 #blockmintxfee=<amt>
 
+# Reserve space for the fixed-size block header plus the largest coinbase
+# transaction the mining software may add to the block. (default:
+# 8000).
+#blockreservedweight=<n>
+
 
 ### RPC server options
 
@@ -663,7 +585,7 @@
 # 18332, testnet4: 48332, signet: 38332, regtest: 18443)
 #rpcport=<port>
 
-# Set the number of threads to service RPC calls (default: 4)
+# Set the number of threads to service RPC calls (default: 16)
 #rpcthreads=<n>
 
 # Username for JSON-RPC connections

diff --git a/v28.1/doc/man/Makefile.am b/v28.1/doc/man/Makefile.am
deleted file mode 100644
index 8f890da..0000000
--- a/v28.1/doc/man/Makefile.am
+++ /dev/null
@@ -1,27 +0,0 @@
-dist_man1_MANS=
-
-if BUILD_BITCOIND
-  dist_man1_MANS+=bitcoind.1
-endif
-
-if ENABLE_QT
-  dist_man1_MANS+=bitcoin-qt.1
-endif
-
-if BUILD_BITCOIN_CLI
-  dist_man1_MANS+=bitcoin-cli.1
-endif
-
-if BUILD_BITCOIN_TX
-  dist_man1_MANS+=bitcoin-tx.1
-endif
-
-if BUILD_BITCOIN_UTIL
-  dist_man1_MANS+=bitcoin-util.1
-endif
-
-if ENABLE_WALLET
-if BUILD_BITCOIN_WALLET
-  dist_man1_MANS+=bitcoin-wallet.1
-endif
-endif
diff --git a/v28.1/doc/man/bitcoin-cli.1 b/32046/doc/man/bitcoin-cli.1
index d355289..2eb89ff 100644
--- a/v28.1/doc/man/bitcoin-cli.1
+++ b/32046/doc/man/bitcoin-cli.1
@@ -1,38 +1,36 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-CLI "1" "December 2024" "bitcoin-cli v28.1.0" "User Commands"
+.TH BITCOIN-CLI "1" "March 2025" "bitcoin-cli v29.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-cli \- manual page for bitcoin-cli v28.1.0
+bitcoin-cli \- manual page for bitcoin-cli v29.0.0rc1
 .SH SYNOPSIS
 .B bitcoin-cli
-[\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Bitcoin Core\/\fR
+[\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]
 .br
 .B bitcoin-cli
-[\fI\,options\/\fR] \fI\,-named <command> \/\fR[\fI\,name=value\/\fR]...  \fI\,Send command to Bitcoin Core (with named arguments)\/\fR
+[\fI\,options\/\fR] \fI\,-named <command> \/\fR[\fI\,name=value\/\fR]...
 .br
 .B bitcoin-cli
-[\fI\,options\/\fR] \fI\,help                List commands\/\fR
+[\fI\,options\/\fR] \fI\,help\/\fR
 .br
 .B bitcoin-cli
-[\fI\,options\/\fR] \fI\,help <command>      Get help for a command\/\fR
+[\fI\,options\/\fR] \fI\,help <command>\/\fR
 .SH DESCRIPTION
-Bitcoin Core RPC client version v28.1.0
+Bitcoin Core RPC client version v29.0.0rc1
+.PP
+The bitcoin\-cli utility provides a command line interface to interact with a Bitcoin Core RPC server.
+.PP
+It can be used to query network information, manage wallets, create or broadcast transactions, and control the Bitcoin Core server.
+.PP
+Use the "help" command to list all commands. Use "help <command>" to show help for that command.
+The \fB\-named\fR option allows you to specify parameters using the key=value format, eliminating the need to pass unused positional parameters.
 .SH OPTIONS
 .HP
-\-?
-.IP
-Print this help message and exit
-.HP
-\fB\-addrinfo\fR
-.IP
-Get the number of addresses known to the node, per network and total,
-after filtering for quality and recency. The total number of
-addresses known to the node may be higher.
-.HP
 \fB\-color=\fR<when>
 .IP
 Color setting for CLI output (default: auto). Valid values: always, auto
 (add color codes when standard output is connected to a terminal
-and OS is not WIN32), never.
+and OS is not WIN32), never. Only applies to the output of
+\fB\-getinfo\fR.
 .HP
 \fB\-conf=\fR<file>
 .IP
@@ -43,34 +41,14 @@ location. (default: bitcoin.conf)
 .IP
 Specify data directory
 .HP
-\fB\-generate\fR
-.IP
-Generate blocks, equivalent to RPC getnewaddress followed by RPC
-generatetoaddress. Optional positional integer arguments are
-number of blocks to generate (default: 1) and maximum iterations
-to try (default: 1000000), equivalent to RPC generatetoaddress
-nblocks and maxtries arguments. Example: bitcoin\-cli \fB\-generate\fR 4
-1000
-.HP
-\fB\-getinfo\fR
+\fB\-help\fR
 .IP
-Get general information from the remote server. Note that unlike
-server\-side RPC calls, the output of \fB\-getinfo\fR is the result of
-multiple non\-atomic requests. Some entries in the output may
-represent results from different states (e.g. wallet balance may
-be as of a different block from the chain state reported)
+Print this help message and exit (also \fB\-h\fR or \-?)
 .HP
 \fB\-named\fR
 .IP
 Pass named instead of positional arguments (default: false)
 .HP
-\fB\-netinfo\fR
-.IP
-Get network peer connection information from the remote server. An
-optional integer argument from 0 to 4 can be passed for different
-peers listings (default: 0). Pass "help" for detailed help
-documentation.
-.HP
 \fB\-rpcclienttimeout=\fR<n>
 .IP
 Timeout in seconds during HTTP requests, or 0 for no timeout. (default:
@@ -175,8 +153,42 @@ Consider moving to testnet4 now by using \fB\-testnet4\fR.
 \fB\-testnet4\fR
 .IP
 Use the testnet4 chain. Equivalent to \fB\-chain\fR=\fI\,testnet4\/\fR.
+.PP
+CLI Commands:
+.HP
+\fB\-addrinfo\fR
+.IP
+Get the number of addresses known to the node, per network and total,
+after filtering for quality and recency. The total number of
+addresses known to the node may be higher.
+.HP
+\fB\-generate\fR
+.IP
+Generate blocks, equivalent to RPC getnewaddress followed by RPC
+generatetoaddress. Optional positional integer arguments are
+number of blocks to generate (default: 1) and maximum iterations
+to try (default: 1000000), equivalent to RPC generatetoaddress
+nblocks and maxtries arguments. Example: bitcoin\-cli \fB\-generate\fR 4
+1000
+.HP
+\fB\-getinfo\fR
+.IP
+Get general information from the remote server. Note that unlike
+server\-side RPC calls, the output of \fB\-getinfo\fR is the result of
+multiple non\-atomic requests. Some entries in the output may
+represent results from different states (e.g. wallet balance may
+be as of a different block from the chain state reported)
+.HP
+\fB\-netinfo\fR
+.IP
+Get network peer connection information from the remote server. An
+optional argument from 0 to 4 can be passed for different peers
+listings (default: 0). If a non\-zero value is passed, an
+additional "outonly" (or "o") argument can be passed to see
+outbound peers only. Pass "help" (or "h") for detailed help
+documentation.
 .SH COPYRIGHT
-Copyright (C) 2009-2024 The Bitcoin Core developers
+Copyright (C) 2009-2025 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org/> for further information about the software.
diff --git a/v28.1/doc/man/bitcoin-qt.1 b/32046/doc/man/bitcoin-qt.1
index fe76cd9..20b7b96 100644
--- a/v28.1/doc/man/bitcoin-qt.1
+++ b/32046/doc/man/bitcoin-qt.1
@@ -1,20 +1,22 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-QT "1" "December 2024" "bitcoin-qt v28.1.0" "User Commands"
+.TH BITCOIN-QT "1" "March 2025" "bitcoin-qt v29.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-qt \- manual page for bitcoin-qt v28.1.0
+bitcoin-qt \- manual page for bitcoin-qt v29.0.0rc1
 .SH SYNOPSIS
 .B bitcoin-qt
-[\fI\,command-line options\/\fR] [\fI\,URI\/\fR]
+[\fI\,options\/\fR] [\fI\,URI\/\fR]
 .SH DESCRIPTION
-Bitcoin Core version v28.1.0
+Bitcoin Core version v29.0.0rc1
 .PP
-Optional URI is a Bitcoin address in BIP21 URI format.
+The bitcoin\-qt application provides a graphical interface for interacting with Bitcoin Core.
+.PP
+It combines the core functionalities of bitcoind with a user\-friendly interface for wallet management, transaction history, and network statistics.
+.PP
+It is suitable for users who prefer a graphical over a command\-line interface.
+.PP
+You can optionally specify a payment [URI], in e.g. the BIP21 URI format.
 .SH OPTIONS
 .HP
-\-?
-.IP
-Print this help message and exit
-.HP
 \fB\-alertnotify=\fR<cmd>
 .IP
 Execute command when an alert is raised (%s in cmd is replaced by
@@ -30,13 +32,13 @@ datadir as a warning, not an error.
 If this block is in the chain assume that it and its ancestors are valid
 and potentially skip their script verification (0 to verify all,
 default:
-000000000000000000011c5890365bdbe5d25b97ce0057589acaef4f1a57263f,
+00000000000000000001b658dd1120e82e66d2790811f89ede9742ada3ed6d77,
 testnet3:
-000000000000000465b1a66c9f386308e8c75acef9201f3f577811da09fc90ad,
+00000000000003fc7967410ba2d0a8a8d50daedc318d43e8baf1a9782c236a57,
 testnet4:
-000000005be348057db991fa5d89fe7c4695b667cfb311391a8db374b6f681fd,
+0000000000003ed4f08dbdf6f7d6b271a6bcffce25675cb40aa9fa43179a89f3,
 signet:
-0000014aad1d58dddcb964dd749b073374c6306e716b22f573a2efe68d414539)
+000000895a110f46e59eb82bbc5bfb67fa314656009c295509c21b4999f5180a)
 .HP
 \fB\-blockfilterindex=\fR<type>
 .IP
@@ -97,9 +99,9 @@ Specify data directory
 .HP
 \fB\-dbcache=\fR<n>
 .IP
-Maximum database cache size <n> MiB (4 to 16384, default: 450). In
-addition, unused mempool memory is shared for this cache (see
-\fB\-maxmempool\fR).
+Maximum database cache size <n> MiB (minimum 4, default: 450). Make sure
+you have enough RAM. In addition, unused memory allocated to the
+mempool is shared with this cache (see \fB\-maxmempool\fR).
 .HP
 \fB\-debuglogfile=\fR<file>
 .IP
@@ -107,6 +109,10 @@ Specify location of debug log file (default: debug.log). Relative paths
 will be prefixed by a net\-specific datadir location. Pass
 \fB\-nodebuglogfile\fR to disable writing the log to a file.
 .HP
+\fB\-help\fR
+.IP
+Print this help message and exit (also \fB\-h\fR or \-?)
+.HP
 \fB\-includeconf=\fR<file>
 .IP
 Specify additional configuration file, relative to the \fB\-datadir\fR path
@@ -319,7 +325,7 @@ base while uppercase is 1024 base
 .HP
 \fB\-natpmp\fR
 .IP
-Use NAT\-PMP to map the listening port (default: 0)
+Use PCP or NAT\-PMP to map the listening port (default: 0)
 .HP
 \fB\-networkactive\fR
 .IP
@@ -388,10 +394,6 @@ Tor control host and port to use if onion listening enabled (default:
 .IP
 Tor control port password (default: empty)
 .HP
-\fB\-upnp\fR
-.IP
-Use UPnP to map the listening port (default: 0)
-.HP
 \fB\-v2transport\fR
 .IP
 Support v2 transport (default: 1)
@@ -697,11 +699,6 @@ Relay and mine data carrier transactions (default: 1)
 Relay and mine transactions whose data\-carrying raw scriptPubKey is of
 this size or less (default: 83)
 .HP
-\fB\-mempoolfullrbf\fR
-.IP
-(DEPRECATED) Accept transaction replace\-by\-fee without requiring
-replaceability signaling (default: 1)
-.HP
 \fB\-minrelaytxfee=\fR<amt>
 .IP
 Fees (in BTC/kvB) smaller than this are considered zero fee for
@@ -727,12 +724,18 @@ Block creation options:
 .HP
 \fB\-blockmaxweight=\fR<n>
 .IP
-Set maximum BIP141 block weight (default: 3996000)
+Set maximum BIP141 block weight (default: 4000000)
 .HP
 \fB\-blockmintxfee=\fR<amt>
 .IP
 Set lowest fee rate (in BTC/kvB) for transactions to be included in
 block creation. (default: 0.00001)
+.HP
+\fB\-blockreservedweight=\fR<n>
+.IP
+Reserve space for the fixed\-size block header plus the largest coinbase
+transaction the mining software may add to the block. (default:
+8000).
 .PP
 RPC server options:
 .HP
@@ -787,7 +790,7 @@ Listen for JSON\-RPC connections on <port> (default: 8332, testnet3:
 .HP
 \fB\-rpcthreads=\fR<n>
 .IP
-Set the number of threads to service RPC calls (default: 4)
+Set the number of threads to service RPC calls (default: 16)
 .HP
 \fB\-rpcuser=\fR<user>
 .IP
@@ -836,7 +839,7 @@ Reset all settings changed in the GUI
 .IP
 Show splash screen on startup (default: 1)
 .SH COPYRIGHT
-Copyright (C) 2009-2024 The Bitcoin Core developers
+Copyright (C) 2009-2025 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org/> for further information about the software.
diff --git a/v28.1/doc/man/bitcoin-tx.1 b/32046/doc/man/bitcoin-tx.1
index 26cbd9b..b493f91 100644
--- a/v28.1/doc/man/bitcoin-tx.1
+++ b/32046/doc/man/bitcoin-tx.1
@@ -1,25 +1,29 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-TX "1" "December 2024" "bitcoin-tx v28.1.0" "User Commands"
+.TH BITCOIN-TX "1" "March 2025" "bitcoin-tx v29.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-tx \- manual page for bitcoin-tx v28.1.0
+bitcoin-tx \- manual page for bitcoin-tx v29.0.0rc1
 .SH SYNOPSIS
 .B bitcoin-tx
-[\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]  \fI\,Update hex-encoded bitcoin transaction\/\fR
+[\fI\,options\/\fR] \fI\,<hex-tx> \/\fR[\fI\,commands\/\fR]
 .br
 .B bitcoin-tx
-[\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded bitcoin transaction\/\fR
+[\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]
 .SH DESCRIPTION
-Bitcoin Core bitcoin\-tx utility version v28.1.0
+Bitcoin Core bitcoin\-tx utility version v29.0.0rc1
+.PP
+The bitcoin\-tx tool is used for creating and modifying bitcoin transactions.
+.PP
+bitcoin\-tx can be used with "<hex\-tx> [commands]" to update a hex\-encoded bitcoin transaction, or with "\-create [commands]" to create a hex\-encoded bitcoin transaction.
 .SH OPTIONS
 .HP
-\-?
-.IP
-Print this help message and exit
-.HP
 \fB\-create\fR
 .IP
 Create new, empty TX.
 .HP
+\fB\-help\fR
+.IP
+Print this help message and exit (also \fB\-h\fR or \-?)
+.HP
 \fB\-json\fR
 .IP
 Select JSON output
@@ -142,7 +146,7 @@ set=NAME:JSON\-STRING
 .IP
 Set register NAME to given JSON\-STRING
 .SH COPYRIGHT
-Copyright (C) 2009-2024 The Bitcoin Core developers
+Copyright (C) 2009-2025 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org/> for further information about the software.
diff --git a/v28.1/doc/man/bitcoin-util.1 b/32046/doc/man/bitcoin-util.1
index 415e6d0..74cf232 100644
--- a/v28.1/doc/man/bitcoin-util.1
+++ b/32046/doc/man/bitcoin-util.1
@@ -1,17 +1,22 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-UTIL "1" "December 2024" "bitcoin-util v28.1.0" "User Commands"
+.TH BITCOIN-UTIL "1" "March 2025" "bitcoin-util v29.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-util \- manual page for bitcoin-util v28.1.0
+bitcoin-util \- manual page for bitcoin-util v29.0.0rc1
 .SH SYNOPSIS
 .B bitcoin-util
-[\fI\,options\/\fR] [\fI\,commands\/\fR]  \fI\,Do stuff\/\fR
+[\fI\,options\/\fR] [\fI\,command\/\fR]
+.br
+.B bitcoin-util
+[\fI\,options\/\fR] \fI\,grind <hex-block-header>\/\fR
 .SH DESCRIPTION
-Bitcoin Core bitcoin\-util utility version v28.1.0
+Bitcoin Core bitcoin\-util utility version v29.0.0rc1
+.PP
+The bitcoin\-util tool provides bitcoin related functionality that does not rely on the ability to access a running node. Available [commands] are listed below.
 .SH OPTIONS
 .HP
-\-?
+\fB\-help\fR
 .IP
-Print this help message and exit
+Print this help message and exit (also \fB\-h\fR or \-?)
 .HP
 \fB\-version\fR
 .IP
@@ -60,7 +65,7 @@ grind
 .IP
 Perform proof of work on hex header string
 .SH COPYRIGHT
-Copyright (C) 2009-2024 The Bitcoin Core developers
+Copyright (C) 2009-2025 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org/> for further information about the software.
diff --git a/v28.1/doc/man/bitcoin-wallet.1 b/32046/doc/man/bitcoin-wallet.1
index a043129..dbf3010 100644
--- a/v28.1/doc/man/bitcoin-wallet.1
+++ b/32046/doc/man/bitcoin-wallet.1
@@ -1,22 +1,20 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-WALLET "1" "December 2024" "bitcoin-wallet v28.1.0" "User Commands"
+.TH BITCOIN-WALLET "1" "March 2025" "bitcoin-wallet v29.0.0rc1" "User Commands"
 .SH NAME
-bitcoin-wallet \- manual page for bitcoin-wallet v28.1.0
+bitcoin-wallet \- manual page for bitcoin-wallet v29.0.0rc1
+.SH SYNOPSIS
+.B bitcoin-wallet
+[\fI\,options\/\fR] \fI\,<command>\/\fR
 .SH DESCRIPTION
-Bitcoin Core bitcoin\-wallet version v28.1.0
+Bitcoin Core bitcoin\-wallet utility version v29.0.0rc1
 .PP
 bitcoin\-wallet is an offline tool for creating and interacting with Bitcoin Core wallet files.
+.PP
 By default bitcoin\-wallet will act on wallets in the default mainnet wallet directory in the datadir.
-To change the target wallet, use the \fB\-datadir\fR, \fB\-wallet\fR and \fB\-regtest\fR/\-signet/\-testnet/\-testnet4 arguments.
-.SS "Usage:"
-.IP
-bitcoin\-wallet [options] <command>
+.PP
+To change the target wallet, use the \fB\-datadir\fR, \fB\-wallet\fR and (test)chain selection arguments.
 .SH OPTIONS
 .HP
-\-?
-.IP
-Print this help message and exit
-.HP
 \fB\-datadir=\fR<dir>
 .IP
 Specify data directory
@@ -35,6 +33,10 @@ with 'createfromdump', loads the records into a new wallet.
 The format of the wallet file to create. Either "bdb" or "sqlite". Only
 used with 'createfromdump'
 .HP
+\fB\-help\fR
+.IP
+Print this help message and exit (also \fB\-h\fR or \-?)
+.HP
 \fB\-legacy\fR
 .IP
 Create legacy wallet. Only for 'create'
@@ -121,7 +123,7 @@ salvage
 Attempt to recover private keys from a corrupt wallet. Warning:
 \&'salvage' is experimental.
 .SH COPYRIGHT
-Copyright (C) 2009-2024 The Bitcoin Core developers
+Copyright (C) 2009-2025 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org/> for further information about the software.
diff --git a/v28.1/doc/man/bitcoind.1 b/32046/doc/man/bitcoind.1
index 1acb2df..865a59e 100644
--- a/v28.1/doc/man/bitcoind.1
+++ b/32046/doc/man/bitcoind.1
@@ -1,18 +1,22 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIND "1" "December 2024" "bitcoind v28.1.0" "User Commands"
+.TH BITCOIND "1" "March 2025" "bitcoind v29.0.0rc1" "User Commands"
 .SH NAME
-bitcoind \- manual page for bitcoind v28.1.0
+bitcoind \- manual page for bitcoind v29.0.0rc1
 .SH SYNOPSIS
 .B bitcoind
-[\fI\,options\/\fR]                     \fI\,Start Bitcoin Core\/\fR
+[\fI\,options\/\fR]
 .SH DESCRIPTION
-Bitcoin Core version v28.1.0
+Bitcoin Core daemon version v29.0.0rc1
+.PP
+The Bitcoin Core daemon (bitcoind) is a headless program that connects to the Bitcoin network to validate and relay transactions and blocks, as well as relaying addresses.
+.PP
+It provides the backbone of the Bitcoin network and its RPC, REST and ZMQ services can provide various transaction, block and address\-related services.
+.PP
+There is an optional wallet component which provides transaction services.
+.PP
+It can be used in a headless environment or as part of a server setup.
 .SH OPTIONS
 .HP
-\-?
-.IP
-Print this help message and exit
-.HP
 \fB\-alertnotify=\fR<cmd>
 .IP
 Execute command when an alert is raised (%s in cmd is replaced by
@@ -28,13 +32,13 @@ datadir as a warning, not an error.
 If this block is in the chain assume that it and its ancestors are valid
 and potentially skip their script verification (0 to verify all,
 default:
-000000000000000000011c5890365bdbe5d25b97ce0057589acaef4f1a57263f,
+00000000000000000001b658dd1120e82e66d2790811f89ede9742ada3ed6d77,
 testnet3:
-000000000000000465b1a66c9f386308e8c75acef9201f3f577811da09fc90ad,
+00000000000003fc7967410ba2d0a8a8d50daedc318d43e8baf1a9782c236a57,
 testnet4:
-000000005be348057db991fa5d89fe7c4695b667cfb311391a8db374b6f681fd,
+0000000000003ed4f08dbdf6f7d6b271a6bcffce25675cb40aa9fa43179a89f3,
 signet:
-0000014aad1d58dddcb964dd749b073374c6306e716b22f573a2efe68d414539)
+000000895a110f46e59eb82bbc5bfb67fa314656009c295509c21b4999f5180a)
 .HP
 \fB\-blockfilterindex=\fR<type>
 .IP
@@ -95,9 +99,9 @@ Specify data directory
 .HP
 \fB\-dbcache=\fR<n>
 .IP
-Maximum database cache size <n> MiB (4 to 16384, default: 450). In
-addition, unused mempool memory is shared for this cache (see
-\fB\-maxmempool\fR).
+Maximum database cache size <n> MiB (minimum 4, default: 450). Make sure
+you have enough RAM. In addition, unused memory allocated to the
+mempool is shared with this cache (see \fB\-maxmempool\fR).
 .HP
 \fB\-debuglogfile=\fR<file>
 .IP
@@ -105,6 +109,10 @@ Specify location of debug log file (default: debug.log). Relative paths
 will be prefixed by a net\-specific datadir location. Pass
 \fB\-nodebuglogfile\fR to disable writing the log to a file.
 .HP
+\fB\-help\fR
+.IP
+Print this help message and exit (also \fB\-h\fR or \-?)
+.HP
 \fB\-includeconf=\fR<file>
 .IP
 Specify additional configuration file, relative to the \fB\-datadir\fR path
@@ -317,7 +325,7 @@ base while uppercase is 1024 base
 .HP
 \fB\-natpmp\fR
 .IP
-Use NAT\-PMP to map the listening port (default: 0)
+Use PCP or NAT\-PMP to map the listening port (default: 0)
 .HP
 \fB\-networkactive\fR
 .IP
@@ -386,10 +394,6 @@ Tor control host and port to use if onion listening enabled (default:
 .IP
 Tor control port password (default: empty)
 .HP
-\fB\-upnp\fR
-.IP
-Use UPnP to map the listening port (default: 0)
-.HP
 \fB\-v2transport\fR
 .IP
 Support v2 transport (default: 1)
@@ -695,11 +699,6 @@ Relay and mine data carrier transactions (default: 1)
 Relay and mine transactions whose data\-carrying raw scriptPubKey is of
 this size or less (default: 83)
 .HP
-\fB\-mempoolfullrbf\fR
-.IP
-(DEPRECATED) Accept transaction replace\-by\-fee without requiring
-replaceability signaling (default: 1)
-.HP
 \fB\-minrelaytxfee=\fR<amt>
 .IP
 Fees (in BTC/kvB) smaller than this are considered zero fee for
@@ -725,12 +724,18 @@ Block creation options:
 .HP
 \fB\-blockmaxweight=\fR<n>
 .IP
-Set maximum BIP141 block weight (default: 3996000)
+Set maximum BIP141 block weight (default: 4000000)
 .HP
 \fB\-blockmintxfee=\fR<amt>
 .IP
 Set lowest fee rate (in BTC/kvB) for transactions to be included in
 block creation. (default: 0.00001)
+.HP
+\fB\-blockreservedweight=\fR<n>
+.IP
+Reserve space for the fixed\-size block header plus the largest coinbase
+transaction the mining software may add to the block. (default:
+8000).
 .PP
 RPC server options:
 .HP
@@ -785,7 +790,7 @@ Listen for JSON\-RPC connections on <port> (default: 8332, testnet3:
 .HP
 \fB\-rpcthreads=\fR<n>
 .IP
-Set the number of threads to service RPC calls (default: 4)
+Set the number of threads to service RPC calls (default: 16)
 .HP
 \fB\-rpcuser=\fR<user>
 .IP
@@ -812,7 +817,7 @@ subject to empty whitelists.
 .IP
 Accept command line and JSON\-RPC commands
 .SH COPYRIGHT
-Copyright (C) 2009-2024 The Bitcoin Core developers
+Copyright (C) 2009-2025 The Bitcoin Core developers
 
 Please contribute if you find Bitcoin Core useful. Visit
 <https://bitcoincore.org/> for further information about the software.