fix: ls2k500sfb build error, gpio_device_find_by_label should be used #1

Zeno-sole · 2024-04-25T17:02:39Z

commit: d62fcd9

Florian reported the following kernel NULL pointer dereference issue on a BCM7250 board: [ 2.829744] Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [ 2.838740] [0000000c] *pgd=80000000004003, *pmd=00000000 [ 2.844178] Internal error: Oops: 206 [#1] SMP ARM [ 2.848990] Modules linked in: [ 2.852061] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.8.0-next-20240305-gd95fcdf4961d torvalds#66 [ 2.860436] Hardware name: Broadcom STB (Flattened Device Tree) [ 2.866371] PC is at brcmnand_read_by_pio+0x180/0x278 [ 2.871449] LR is at __wait_for_common+0x9c/0x1b0 [ 2.876178] pc : [<c094b6cc>] lr : [<c0e66310>] psr: 60000053 [ 2.882460] sp : f0811a80 ip : 00000012 fp : 00000000 [ 2.887699] r10: 00000000 r9 : 00000000 r8 : c3790000 [ 2.892936] r7 : 00000000 r6 : 00000000 r5 : c35db440 r4 : ffe00000 [ 2.899479] r3 : f15cb814 r2 : 00000000 r1 : 00000000 r0 : 00000000 The issue only happens when dma mode is disabled or not supported on STB chip. The pio mode transfer calls brcmnand_read_data_bus function which dereferences ctrl->soc->read_data_bus. But the soc member in STB chip is NULL hence triggers the access violation. The function needs to check the soc pointer first. Fixes: 546e425 ("mtd: rawnand: brcmnand: Add BCMBCA read data bus interface") Reported-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240320222623.35604-1-william.zhang@broadcom.com

During the removal of the idxd driver, registered offline callback is invoked as part of the clean up process. However, on systems with only one CPU online, no valid target is available to migrate the perf context, resulting in a kernel oops: BUG: unable to handle page fault for address: 000000000002a2b8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 1470e1067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ torvalds#57 Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 RIP: 0010:mutex_lock+0x2e/0x50 ... Call Trace: <TASK> __die+0x24/0x70 page_fault_oops+0x82/0x160 do_user_addr_fault+0x65/0x6b0 __pfx___rdmsr_safe_on_cpu+0x10/0x10 exc_page_fault+0x7d/0x170 asm_exc_page_fault+0x26/0x30 mutex_lock+0x2e/0x50 mutex_lock+0x1e/0x50 perf_pmu_migrate_context+0x87/0x1f0 perf_event_cpu_offline+0x76/0x90 [idxd] cpuhp_invoke_callback+0xa2/0x4f0 __pfx_perf_event_cpu_offline+0x10/0x10 [idxd] cpuhp_thread_fun+0x98/0x150 smpboot_thread_fn+0x27/0x260 smpboot_thread_fn+0x1af/0x260 __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x103/0x140 __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 <TASK> Fix the issue by preventing the migration of the perf context to an invalid target. Fixes: 81dd4d4 ("dmaengine: idxd: Add IDXD performance monitor support") Reported-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20240313214031.1658045-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>

Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson <dianders@chromium.org> Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 9a34b45 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson <dianders@chromium.org>

Drop support for virtualizing adaptive PEBS, as KVM's implementation is architecturally broken without an obvious/easy path forward, and because exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak host kernel addresses to the guest. Bug #1 is that KVM doesn't account for the upper 32 bits of IA32_FIXED_CTR_CTRL when (re)programming fixed counters, e.g fixed_ctrl_field() drops the upper bits, reprogram_fixed_counters() stores local variables as u8s and truncates the upper bits too, etc. Bug #2 is that, because KVM _always_ sets precise_ip to a non-zero value for PEBS events, perf will _always_ generate an adaptive record, even if the guest requested a basic record. Note, KVM will also enable adaptive PEBS in individual *counter*, even if adaptive PEBS isn't exposed to the guest, but this is benign as MSR_PEBS_DATA_CFG is guaranteed to be zero, i.e. the guest will only ever see Basic records. Bug #3 is in perf. intel_pmu_disable_fixed() doesn't clear the upper bits either, i.e. leaves ICL_FIXED_0_ADAPTIVE set, and intel_pmu_enable_fixed() effectively doesn't clear ICL_FIXED_0_ADAPTIVE either. I.e. perf _always_ enables ADAPTIVE counters, regardless of what KVM requests. Bug #4 is that adaptive PEBS *might* effectively bypass event filters set by the host, as "Updated Memory Access Info Group" records information that might be disallowed by userspace via KVM_SET_PMU_EVENT_FILTER. Bug #5 is that KVM doesn't ensure LBR MSRs hold guest values (or at least zeros) when entering a vCPU with adaptive PEBS, which allows the guest to read host LBRs, i.e. host RIPs/addresses, by enabling "LBR Entries" records. Disable adaptive PEBS support as an immediate fix due to the severity of the LBR leak in particular, and because fixing all of the bugs will be non-trivial, e.g. not suitable for backporting to stable kernels. Note! This will break live migration, but trying to make KVM play nice with live migration would be quite complicated, wouldn't be guaranteed to work (i.e. KVM might still kill/confuse the guest), and it's not clear that there are any publicly available VMMs that support adaptive PEBS, let alone live migrate VMs that support adaptive PEBS, e.g. QEMU doesn't support PEBS in any capacity. Link: https://lore.kernel.org/all/20240306230153.786365-1-seanjc@google.com Link: https://lore.kernel.org/all/ZeepGjHCeSfadANM@google.com Fixes: c59a1f1 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") Cc: stable@vger.kernel.org Cc: Like Xu <like.xu.linux@gmail.com> Cc: Mingwei Zhang <mizhang@google.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhang Xiong <xiong.y.zhang@intel.com> Cc: Lv Zhiyuan <zhiyuan.lv@intel.com> Cc: Dapeng Mi <dapeng1.mi@intel.com> Cc: Jim Mattson <jmattson@google.com> Acked-by: Like Xu <likexu@tencent.com> Link: https://lore.kernel.org/r/20240307005833.827147-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) Cc: stable@vger.kernel.org Fixes: 4d90bb1 ("serial: core: Document and assert lock requirements for irq helpers") Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com> Link: https://lore.kernel.org/r/20240320121530.11348-1-emil.kronborg@protonmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…git/netfilter/nf netfilter pull request 24-04-11 Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patches #1 and #2 add missing rcu read side lock when iterating over expression and object type list which could race with module removal. Patch #3 prevents promisc packet from visiting the bridge/input hook to amend a recent fix to address conntrack confirmation race in br_netfilter and nf_conntrack_bridge. Patch #4 adds and uses iterate decorator type to fetch the current pipapo set backend datastructure view when netlink dumps the set elements. Patch #5 fixes removal of duplicate elements in the pipapo set backend. Patch #6 flowtable validates pppoe header before accessing it. Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup fails and pppoe packets follow classic path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethnl_ops_begin+0xb0/0xb0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 ? do_user_addr_fault+0x53f/0x8f0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> Fixes: 45bf454 ("net/mlx5e: Enabling aRFS mechanism") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240411115444.374475-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ torvalds#27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb. Cc: <stable@vger.kernel.org> Fixes: be55287 ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com

Currently normal HugeTLB fault ends up crashing the kernel, as p4dp derived from p4d_offset() is an invalid address when PGTABLE_LEVEL = 5. A p4d level entry needs to be allocated when not available while walking the page table during HugeTLB faults. Let's call p4d_alloc() to allocate such entries when required instead of current p4d_offset(). Unable to handle kernel paging request at virtual address ffffffff80000000 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000081da9000 [ffffffff80000000] pgd=1000000082cec003, p4d=0000000082c32003, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 108 Comm: high_addr_hugep Not tainted 6.9.0-rc4 torvalds#48 Hardware name: Foundation-v8A (DT) pstate: 01402005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : huge_pte_alloc+0xd4/0x334 lr : hugetlb_fault+0x1b8/0xc68 sp : ffff8000833bbc20 x29: ffff8000833bbc20 x28: fff000080080cb58 x27: ffff800082a7cc58 x26: 0000000000000000 x25: fff0000800378e40 x24: fff00008008d6c60 x23: 00000000de9dbf07 x22: fff0000800378e40 x21: 0004000000000000 x20: 0004000000000000 x19: ffffffff80000000 x18: 1ffe00010011d7a1 x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000001 x14: 0000000000000000 x13: ffff8000816120d0 x12: ffffffffffffffff x11: 0000000000000000 x10: fff00008008ebd0c x9 : 0004000000000000 x8 : 0000000000001255 x7 : fff00008003e2000 x6 : 00000000061d54b0 x5 : 0000000000001000 x4 : ffffffff80000000 x3 : 0000000000200000 x2 : 0000000000000004 x1 : 0000000080000000 x0 : 0000000000000000 Call trace: huge_pte_alloc+0xd4/0x334 hugetlb_fault+0x1b8/0xc68 handle_mm_fault+0x260/0x29c do_page_fault+0xfc/0x47c do_translation_fault+0x68/0x74 do_mem_abort+0x44/0x94 el0_da+0x2c/0x9c el0t_64_sync_handler+0x70/0xc4 el0t_64_sync+0x190/0x194 Code: aa000084 cb010084 b24c2c84 8b130c93 (f9400260) ---[ end trace 0000000000000000 ]--- Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Fixes: a6bbf5d ("arm64: mm: Add definitions to support 5 levels of paging") Reported-by: Dev Jain <dev.jain@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20240415094003.1812018-1-anshuman.khandual@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

On arm64, UBSAN traps can be decoded from the trap instruction. Add the add, sub, and mul overflow trap codes now that CONFIG_UBSAN_SIGNED_WRAP exists. Seen under clang 19: Internal error: UBSAN: unrecognized failure code: 00000000f2005515 [#1] PREEMPT SMP Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/lkml/20240411-fix-ubsan-in-hardening-config-v1-0-e0177c80ffaa@kernel.org Fixes: 557f8c5 ("ubsan: Reintroduce signed overflow sanitizer") Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240415182832.work.932-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>

When I did hard offline test with hugetlb pages, below deadlock occurs: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-11409-gf6cef5f8c37f #1 Not tainted ------------------------------------------------------ bash/46904 is trying to acquire lock: ffffffffabe68910 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_slow_dec+0x16/0x60 but task is already holding lock: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (pcp_batch_high_lock){+.+.}-{3:3}: __mutex_lock+0x6c/0x770 page_alloc_cpu_online+0x3c/0x70 cpuhp_invoke_callback+0x397/0x5f0 __cpuhp_invoke_callback_range+0x71/0xe0 _cpu_up+0xeb/0x210 cpu_up+0x91/0xe0 cpuhp_bringup_mask+0x49/0xb0 bringup_nonboot_cpus+0xb7/0xe0 smp_init+0x25/0xa0 kernel_init_freeable+0x15f/0x3e0 kernel_init+0x15/0x1b0 ret_from_fork+0x2f/0x50 ret_from_fork_asm+0x1a/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1298/0x1cd0 lock_acquire+0xc0/0x2b0 cpus_read_lock+0x2a/0xc0 static_key_slow_dec+0x16/0x60 __hugetlb_vmemmap_restore_folio+0x1b9/0x200 dissolve_free_huge_page+0x211/0x260 __page_handle_poison+0x45/0xc0 memory_failure+0x65e/0xc70 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xca/0x1e0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(pcp_batch_high_lock); lock(cpu_hotplug_lock); lock(pcp_batch_high_lock); rlock(cpu_hotplug_lock); *** DEADLOCK *** 5 locks held by bash/46904: #0: ffff98f6c3bb23f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0 #1: ffff98f6c328e488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0 #2: ffff98ef83b31890 (kn->active#113){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0 #3: ffffffffabf9db48 (mf_mutex){+.+.}-{3:3}, at: memory_failure+0x44/0xc70 #4: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40 stack backtrace: CPU: 10 PID: 46904 Comm: bash Kdump: loaded Not tainted 6.8.0-11409-gf6cef5f8c37f #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 check_noncircular+0x129/0x140 __lock_acquire+0x1298/0x1cd0 lock_acquire+0xc0/0x2b0 cpus_read_lock+0x2a/0xc0 static_key_slow_dec+0x16/0x60 __hugetlb_vmemmap_restore_folio+0x1b9/0x200 dissolve_free_huge_page+0x211/0x260 __page_handle_poison+0x45/0xc0 memory_failure+0x65e/0xc70 hard_offline_page_store+0x55/0xa0 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xca/0x1e0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fc862314887 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff19311268 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc862314887 RDX: 000000000000000c RSI: 000056405645fe10 RDI: 0000000000000001 RBP: 000056405645fe10 R08: 00007fc8623d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007fc86241b780 R14: 00007fc862417600 R15: 00007fc862416a00 In short, below scene breaks the lock dependency chain: memory_failure __page_handle_poison zone_pcp_disable -- lock(pcp_batch_high_lock) dissolve_free_huge_page __hugetlb_vmemmap_restore_folio static_key_slow_dec cpus_read_lock -- rlock(cpu_hotplug_lock) Fix this by calling drain_all_pages() instead. This issue won't occur until commit a6b4085 ("mm: hugetlb: replace hugetlb_free_vmemmap_enabled with a static_key"). As it introduced rlock(cpu_hotplug_lock) in dissolve_free_huge_page() code path while lock(pcp_batch_high_lock) is already in the __page_handle_poison(). [linmiaohe@huawei.com: extend comment per Oscar] [akpm@linux-foundation.org: reflow block comment] Link: https://lkml.kernel.org/r/20240407085456.2798193-1-linmiaohe@huawei.com Fixes: a6b4085 ("mm: hugetlb: replace hugetlb_free_vmemmap_enabled with a static_key") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Jane Chu <jane.chu@oracle.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 torvalds#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 torvalds#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 torvalds#12 [ffffa65531497b68] printk at ffffffff89318306 torvalds#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 torvalds#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] torvalds#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] torvalds#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] torvalds#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] torvalds#18 [ffffa65531497f10] kthread at ffffffff892d2e72 torvalds#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 amends a missing spot where the set iterator type is unset. This is fixing a issue in the previous pull request. Patch #2 fixes the delete set command abort path by restoring state of the elements. Reverse logic for the activate (abort) case otherwise element state is not restored, this requires to move the check for active/inactive elements to the set iterator callback. From the deactivate path, toggle the next generation bit and from the activate (abort) path, clear the next generation bitmask. Patch #3 skips elements already restored by delete set command from the abort path in case there is a previous delete element command in the batch. Check for the next generation bit just like it is done via set iteration to restore maps. netfilter pull request 24-04-18 * tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: fix memleak in map from abort path netfilter: nf_tables: restore set elements when delete set fails netfilter: nf_tables: missing iterator type in lookup walk ==================== Link: https://lore.kernel.org/r/20240418010948.3332346-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>

On arm64 machines, swsusp_save() faults if it attempts to access MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n: Unable to handle kernel paging request at virtual address ffffff8000000000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000 [ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ torvalds#76 Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0 Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021 pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : swsusp_save+0x280/0x538 lr : swsusp_save+0x280/0x538 sp : ffffffa034a3fa40 x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000 x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000 x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2 x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000 x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666 x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0 x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001 x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e Call trace: swsusp_save+0x280/0x538 swsusp_arch_suspend+0x148/0x190 hibernation_snapshot+0x240/0x39c hibernate+0xc4/0x378 state_store+0xf0/0x10c kobj_attr_store+0x14/0x24 The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable() -> kernel_page_present() assuming that a page is always present when can_set_direct_map() is false (all of rodata_full, debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false), irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions should not be saved during hibernation. This problem was introduced by changes to the pfn_valid() logic in commit a7d9f30 ("arm64: drop pfn_valid_within() and simplify pfn_valid()"). Similar to other architectures, drop the !can_set_direct_map() check in kernel_page_present() so that page_is_savable() skips such pages. Fixes: a7d9f30 ("arm64: drop pfn_valid_within() and simplify pfn_valid()") Cc: <stable@vger.kernel.org> # 5.14.x Suggested-by: Mike Rapoport <rppt@kernel.org> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Co-developed-by: xiongxin <xiongxin@kylinos.cn> Signed-off-by: xiongxin <xiongxin@kylinos.cn> Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Link: https://lore.kernel.org/r/20240417025248.386622-1-tianyaxiong@kylinos.cn [catalin.marinas@arm.com: rework commit message] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Petr Machata says: ==================== mlxsw: Fixes This patchset fixes the following issues: - During driver de-initialization the driver unregisters the EMAD response trap by setting its action to DISCARD. However the manual only permits TRAP and FORWARD, and future firmware versions will enforce this. In patch #1, suppress the error message by aligning the driver to the manual and use a FORWARD (NOP) action when unregistering the trap. - The driver queries the Management Capabilities Mask (MCAM) register during initialization to understand if certain features are supported. However, not all firmware versions support this register, leading to the driver failing to load. Patches #2 and #3 fix this issue by treating an error in the register query as an indication that the feature is not supported. v2: - Patch #2: - Make mlxsw_env_max_module_eeprom_len_query() void ==================== Link: https://lore.kernel.org/r/cover.1713446092.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199 Fixes: 02b2494 ("ipv4: use dst hint for ipv4 list receive") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240421184326.1704930-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If stack_depot_save_flags() allocates memory it always drops __GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP allocation we may end up with lockdep splat like bellow: ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc3+ torvalds#49 Not tainted ------------------------------------------------------ kswapd0/149 is trying to acquire lock: ffff88811346a920 (&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590 [xfs] but task is already holding lock: ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x5d9/0xad0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x7da/0x1030 lock_acquire+0x15d/0x400 fs_reclaim_acquire+0xb5/0x100 prepare_alloc_pages.constprop.0+0xc5/0x230 __alloc_pages+0x12a/0x3f0 alloc_pages_mpol+0x175/0x340 stack_depot_save_flags+0x4c5/0x510 kasan_save_stack+0x30/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x83/0x90 kmem_cache_alloc+0x15e/0x4a0 __alloc_object+0x35/0x370 __create_object+0x22/0x90 __kmalloc_node_track_caller+0x477/0x5b0 krealloc+0x5f/0x110 xfs_iext_insert_raw+0x4b2/0x6e0 [xfs] xfs_iext_insert+0x2e/0x130 [xfs] xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs] xfs_btree_visit_block+0xfb/0x290 [xfs] xfs_btree_visit_blocks+0x215/0x2c0 [xfs] xfs_iread_extents+0x1a2/0x2e0 [xfs] xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs] iomap_iter+0x1d1/0x2d0 iomap_file_buffered_write+0x120/0x1a0 xfs_file_buffered_write+0x128/0x4b0 [xfs] vfs_write+0x675/0x890 ksys_write+0xc3/0x160 do_syscall_64+0x94/0x170 entry_SYSCALL_64_after_hwframe+0x71/0x79 Always preserve __GFP_NOLOCKDEP to fix this. Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com Fixes: cd11016 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Reported-by: Xiubo Li <xiubli@redhat.com> Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/ Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/ Suggested-by: Dave Chinner <david@fromorbit.com> Tested-by: Xiubo Li <xiubli@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Issue reported by customer during SRIOV testing, call trace: When both i40e and the i40iw driver are loaded, a warning in check_flush_dependency is being triggered. This seems to be because of the i40e driver workqueue is allocated with the WQ_MEM_RECLAIM flag, and the i40iw one is not. Similar error was encountered on ice too and it was fixed by removing the flag. Do the same for i40e too. [Feb 9 09:08] ------------[ cut here ]------------ [ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966 check_flush_dependency+0x10b/0x120 [ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod fuse [ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1 [ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 [ +0.000001] Workqueue: i40e i40e_service_task [i40e] [ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120 [ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90 [ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282 [ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX: 0000000000000027 [ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI: ffff94d47f620bc0 [ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffff7fff [ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12: ffff94c5451ea180 [ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15: ffff94c5f1330ab0 [ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4: 00000000007706f0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] ? __warn+0x80/0x130 [ +0.000003] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? report_bug+0x195/0x1a0 [ +0.000005] ? handle_bug+0x3c/0x70 [ +0.000003] ? exc_invalid_op+0x14/0x70 [ +0.000002] ? asm_exc_invalid_op+0x16/0x20 [ +0.000006] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? check_flush_dependency+0x10b/0x120 [ +0.000002] __flush_workqueue+0x126/0x3f0 [ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core] [ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core] [ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core] [ +0.000020] i40iw_close+0x4b/0x90 [irdma] [ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e] [ +0.000035] i40e_service_task+0x126/0x190 [i40e] [ +0.000024] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27e/0x390 [ +0.000001] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xdf/0x110 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork+0x2d/0x50 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000001] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: 4d5957c ("i40e: remove WQ_UNBOUND and the task limit of our workqueue") Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Robert Ganzynkowicz <robert.ganzynkowicz@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

9f74a3d ("ice: Fix VF Reset paths when interface in a failed over aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf(). The commit placed this lock acquisition just prior to the acquisition of the VF configuration lock. If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK flag, this could deadlock with ice_vc_cfg_qs_msg() because it always acquires the locks in the order of the VF configuration lock and then the LAG mutex. Lockdep reports this violation almost immediately on creating and then removing 2 VF: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-rc6 torvalds#54 Tainted: G W O ------------------------------------------------------ kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice] but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pf->lag_mutex){+.+.}-{3:3}: __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_vc_cfg_qs_msg+0x45/0x690 [ice] ice_vc_process_vf_msg+0x4f5/0x870 [ice] __ice_clean_ctrlq+0x2b5/0x600 [ice] ice_service_task+0x2c9/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 -> #0 (&vf->cfg_lock){+.+.}-{3:3}: check_prev_add+0xe2/0xc50 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_reset_vf+0x22f/0x4d0 [ice] ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pf->lag_mutex); lock(&vf->cfg_lock); lock(&pf->lag_mutex); lock(&vf->cfg_lock); *** DEADLOCK *** 4 locks held by kworker/60:3/6771: #0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice] #3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] stack backtrace: CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 torvalds#54 Hardware name: Workqueue: ice ice_service_task [ice] Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x12d/0x150 check_prev_add+0xe2/0xc50 ? save_trace+0x59/0x230 ? add_chain_cache+0x109/0x450 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 ? lockdep_hardirqs_on+0x7d/0x100 lock_acquire+0xd4/0x2d0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? lock_is_held_type+0xc7/0x120 __mutex_lock+0x9b/0xbf0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? ice_reset_vf+0x22f/0x4d0 [ice] ? rcu_is_watching+0x11/0x50 ? ice_reset_vf+0x22f/0x4d0 [ice] ice_reset_vf+0x22f/0x4d0 [ice] ? process_one_work+0x176/0x4d0 ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x104/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> To avoid deadlock, we must acquire the LAG mutex only after acquiring the VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only after we either acquire or check that the VF configuration lock is held. Fixes: 9f74a3d ("ice: Fix VF Reset paths when interface in a failed over aggregate") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…nix_gc(). syzbot reported a lockdep splat regarding unix_gc_lock and unix_state_lock(). One is called from recvmsg() for a connected socket, and another is called from GC for TCP_LISTEN socket. So, the splat is false-positive. Let's add a dedicated lock class for the latter to suppress the splat. Note that this change is not necessary for net-next.git as the issue is only applied to the old GC impl. [0]: WARNING: possible circular locking dependency detected 6.9.0-rc5-syzkaller-00007-g4d2008430ce8 #0 Not tainted ----------------------------------------------------- kworker/u8:1/11 is trying to acquire lock: ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88807cea4e70 (&u->lock){+.+.}-{2:2}, at: __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 but task is already holding lock: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (unix_gc_lock){+.+.}-{2:2}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] unix_notinflight+0x13d/0x390 net/unix/garbage.c:140 unix_detach_fds net/unix/af_unix.c:1819 [inline] unix_destruct_scm+0x221/0x350 net/unix/af_unix.c:1876 skb_release_head_state+0x100/0x250 net/core/skbuff.c:1188 skb_release_all net/core/skbuff.c:1200 [inline] __kfree_skb net/core/skbuff.c:1216 [inline] kfree_skb_reason+0x16d/0x3b0 net/core/skbuff.c:1252 kfree_skb include/linux/skbuff.h:1262 [inline] manage_oob net/unix/af_unix.c:2672 [inline] unix_stream_read_generic+0x1125/0x2700 net/unix/af_unix.c:2749 unix_stream_splice_read+0x239/0x320 net/unix/af_unix.c:2981 do_splice_read fs/splice.c:985 [inline] splice_file_to_pipe+0x299/0x500 fs/splice.c:1295 do_splice+0xf2d/0x1880 fs/splice.c:1379 __do_splice fs/splice.c:1436 [inline] __do_sys_splice fs/splice.c:1652 [inline] __se_sys_splice+0x331/0x4a0 fs/splice.c:1634 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (&u->lock){+.+.}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(unix_gc_lock); lock(&u->lock); lock(unix_gc_lock); lock(&u->lock); *** DEADLOCK *** 3 locks held by kworker/u8:1/11: #0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015089148 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x17c0 kernel/workqueue.c:3335 #1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90000107d00 (unix_gc_work){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x17c0 kernel/workqueue.c:3335 #2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffffffff8f6ab638 (unix_gc_lock){+.+.}-{2:2}, at: __unix_gc+0x117/0xf70 net/unix/garbage.c:261 stack backtrace: CPU: 0 PID: 11 Comm: kworker/u8:1 Not tainted 6.9.0-rc5-syzkaller-00007-g4d2008430ce8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: events_unbound __unix_gc Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18cb/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __unix_gc+0x40e/0xf70 net/unix/garbage.c:302 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa10/0x17c0 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Fixes: 47d8ac0 ("af_unix: Fix garbage collector racing against connect()") Reported-and-tested-by: syzbot+fa379358c28cc87cc307@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fa379358c28cc87cc307 Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240424170443.9832-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains two Netfilter/IPVS fixes for net: Patch #1 fixes SCTP checksumming for IPVS with gso packets, from Ismael Luceno. Patch #2 honor dormant flag from netdev event path to fix a possible double hook unregistration. * tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: honor table dormant flag from netdev release event path ipvs: Fix checksumming on GSO of SCTP packets ==================== Link: https://lore.kernel.org/r/20240425090149.1359547-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

LoongArch inclusion category: feature -------------------------------- The old memory should be reserved after efi_runtime_init() to avoid destroying the EFI space and causing failure when executing svam(). Fix the following problems when executing kdump: [ 0.000000] The BIOS Version: Loongson-UDK2018-V2.0.04082-beta7 [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 00000000fdeb0e7c, era == 00000000fdeb0e7c, ra == 90000000dae6585c [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.137+ torvalds#86 [ 0.000000] Hardware name: Loongson Loongson-3A5000-7A1000-1w-A2101/Loongson-LS3A5000-7A1000-1w-A2101, BIOS vUDK2018-LoongArch-V2.0.pre-beta8 06/15/2022 [ 0.000000] $ 0 : 0000000000000000 90000000dae6585c 90000000db200000 90000000db203840 [ 0.000000] $ 4 : 0000000000000078 0000000000000028 0000000000000001 00000000db203860 [ 0.000000] $ 8 : 0000000000000000 0000000000000040 90000000db203680 0000000000000000 [ 0.000000] $12 : 00000000fdeb0e7c ffffffffffffffc0 00000000fbffffff 0000000020000000 [ 0.000000] $16 : 000000000003e780 0000000020000000 90000000dad8c348 0000000000003fff [ 0.000000] $20 : 0000000000000018 90000000dad8bdd0 90000000db203850 0000000000000040 [ 0.000000] $24 : 000000000000000f 90000000db21a570 90000000daeb07a0 90000000db217000 [ 0.000000] $28 : 90000000db203858 0000000001ffffff 90000000db2171b0 0000000000000040 [ 0.000000] era : 00000000fdeb0e7c 0xfdeb0e7c [ 0.000000] ra : 90000000dae6585c set_virtual_map.isra.0+0x23c/0x394 [ 0.000000] CSR crmd: 90000000db21a570 [ 0.000000] CSR prmd: 00000000 [ 0.000000] CSR euen: 00000000 [ 0.000000] CSR ecfg: 90000000db203850 [ 0.000000] CSR estat: 90000000dae65800 [ 0.000000] ExcCode : 26 (SubCode 16b) [ 0.000000] PrId : 0014c012 (Loongson-64bit) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 0000000000000001 00000000fdeb0e7c 0000000000036780 000000000003e780 [ 0.000000] 0000000000000006 0000000010000000 8000000010000000 0000000000010000 [ 0.000000] 8000000000000001 0000000000000005 00000000fde40000 90000000fde40000 [ 0.000000] 0000000000000100 800000000000000f 0000000000000006 00000000fdf40000 [ 0.000000] 90000000fdf40000 0000000000000300 800000000000000f 00000000000000b0 [ 0.000000] 0000000000000001 90000000da094cf0 0000000000000000 ffffffffffffffea [ 0.000000] 90000000db2039b8 ffff0a1000000609 0000000000000035 0000000000000030 [ 0.000000] 90000000dad7b258 0000000000000400 00000000000000b0 ffff0a1000000609 [ 0.000000] 90000000db2039a8 90000000db095730 000000007fffffff ffff0a1000000609 [ 0.000000] 90000000db203a90 90000000db203a30 90000000db2039d8 90000000db09570b [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [ 0.000000] Code: (Bad address in era) [ 0.000000] [ 0.000000] Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>

MingcongBai · 2024-04-30T08:15:00Z

Picked on the rc6 branch, thank you!

Lockdep detects a possible deadlock as listed below. This is because it detects the IA55 interrupt controller .irq_eoi() API is called from interrupt context while configuration-specific API (e.g., .irq_enable()) could be called from process context on resume path (by calling rzg2l_gpio_irq_restore()). To avoid this, protect the call of rzg2l_gpio_irq_enable() with spin_lock_irqsave()/spin_unlock_irqrestore(). With this the same approach that is available in __setup_irq() is mimicked to pinctrl IRQ resume function. Below is the lockdep report: WARNING: inconsistent lock state 6.8.0-rc5-next-20240219-arm64-renesas-00030-gb17a289abf1f torvalds#90 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. str_rwdt_t_001./159 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff00000b001d70 (&rzg2l_irqc_data->lock){?...}-{2:2}, at: rzg2l_irqc_irq_enable+0x60/0xa4 {IN-HARDIRQ-W} state was registered at: lock_acquire+0x1e0/0x310 _raw_spin_lock+0x44/0x58 rzg2l_irqc_eoi+0x2c/0x130 irq_chip_eoi_parent+0x18/0x20 rzg2l_gpio_irqc_eoi+0xc/0x14 handle_fasteoi_irq+0x134/0x230 generic_handle_domain_irq+0x28/0x3c gic_handle_irq+0x4c/0xbc call_on_irq_stack+0x24/0x34 do_interrupt_handler+0x78/0x7c el1_interrupt+0x30/0x5c el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x64/0x68 _raw_spin_unlock_irqrestore+0x34/0x70 __setup_irq+0x4d4/0x6b8 request_threaded_irq+0xe8/0x1a0 request_any_context_irq+0x60/0xb8 devm_request_any_context_irq+0x74/0x104 gpio_keys_probe+0x374/0xb08 platform_probe+0x64/0xcc really_probe+0x140/0x2ac __driver_probe_device+0x74/0x124 driver_probe_device+0x3c/0x15c __driver_attach+0xec/0x1c4 bus_for_each_dev+0x70/0xcc driver_attach+0x20/0x28 bus_add_driver+0xdc/0x1d0 driver_register+0x5c/0x118 __platform_driver_register+0x24/0x2c gpio_keys_init+0x18/0x20 do_one_initcall+0x70/0x290 kernel_init_freeable+0x294/0x504 kernel_init+0x20/0x1cc ret_from_fork+0x10/0x20 irq event stamp: 69071 hardirqs last enabled at (69071): [<ffff800080e0dafc>] _raw_spin_unlock_irqrestore+0x6c/0x70 hardirqs last disabled at (69070): [<ffff800080e0cfec>] _raw_spin_lock_irqsave+0x7c/0x80 softirqs last enabled at (67654): [<ffff800080010614>] __do_softirq+0x494/0x4dc softirqs last disabled at (67645): [<ffff800080015238>] ____do_softirq+0xc/0x14 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&rzg2l_irqc_data->lock); <Interrupt> lock(&rzg2l_irqc_data->lock); *** DEADLOCK *** 4 locks held by str_rwdt_t_001./159: #0: ffff00000b10f3f0 (sb_writers#4){.+.+}-{0:0}, at: vfs_write+0x1a4/0x35c #1: ffff00000e43ba88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe8/0x1a8 #2: ffff00000aa21dc8 (kn->active#40){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1a8 #3: ffff80008179d970 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x9c/0x278 stack backtrace: CPU: 0 PID: 159 Comm: str_rwdt_t_001. Not tainted 6.8.0-rc5-next-20240219-arm64-renesas-00030-gb17a289abf1f torvalds#90 Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) Call trace: dump_backtrace+0x94/0xe8 show_stack+0x14/0x1c dump_stack_lvl+0x88/0xc4 dump_stack+0x14/0x1c print_usage_bug.part.0+0x294/0x348 mark_lock+0x6b0/0x948 __lock_acquire+0x750/0x20b0 lock_acquire+0x1e0/0x310 _raw_spin_lock+0x44/0x58 rzg2l_irqc_irq_enable+0x60/0xa4 irq_chip_enable_parent+0x1c/0x34 rzg2l_gpio_irq_enable+0xc4/0xd8 rzg2l_pinctrl_resume_noirq+0x4cc/0x520 pm_generic_resume_noirq+0x28/0x3c genpd_finish_resume+0xc0/0xdc genpd_resume_noirq+0x14/0x1c dpm_run_callback+0x34/0x90 device_resume_noirq+0xa8/0x268 dpm_noirq_resume_devices+0x13c/0x160 dpm_resume_noirq+0xc/0x1c suspend_devices_and_enter+0x2c8/0x570 pm_suspend+0x1ac/0x278 state_store+0x88/0x124 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x48/0x6c kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x270/0x35c ksys_write+0x64/0xec __arm64_sys_write+0x18/0x20 invoke_syscall+0x44/0x108 el0_svc_common.constprop.0+0xb4/0xd4 do_el0_svc+0x18/0x20 el0_svc+0x3c/0xb8 el0t_64_sync_handler+0xb8/0xbc el0t_64_sync+0x14c/0x150 Fixes: 254203f ("pinctrl: renesas: rzg2l: Add suspend/resume support") Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240320104230.446400-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Commit 1548036 ("nfs: make the rpc_stat per net namespace") added functionality to specify rpc_stats function but missed adding it to the TCP TLS functionality. As the result, mounting with xprtsec=tls lead to the following kernel oops. [ 128.984192] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001c [ 128.985058] Mem abort info: [ 128.985372] ESR = 0x0000000096000004 [ 128.985709] EC = 0x25: DABT (current EL), IL = 32 bits [ 128.986176] SET = 0, FnV = 0 [ 128.986521] EA = 0, S1PTW = 0 [ 128.986804] FSC = 0x04: level 0 translation fault [ 128.987229] Data abort info: [ 128.987597] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 128.988169] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 128.988811] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 128.989302] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000106c84000 [ 128.990048] [000000000000001c] pgd=0000000000000000, p4d=0000000000000000 [ 128.990736] Internal error: Oops: 0000000096000004 [#1] SMP [ 128.991168] Modules linked in: nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace netfs uinput dm_mod nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables nfnetlink qrtr vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common mc vmw_vmci xfs libcrc32c e1000e crct10dif_ce ghash_ce sha2_ce vmwgfx nvme sha256_arm64 nvme_core sr_mod cdrom sha1_ce drm_ttm_helper ttm drm_kms_helper drm sg fuse [ 128.996466] CPU: 0 PID: 179 Comm: kworker/u4:26 Kdump: loaded Not tainted 6.8.0-rc6+ torvalds#12 [ 128.997226] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023 [ 128.998084] Workqueue: xprtiod xs_tcp_tls_setup_socket [sunrpc] [ 128.998701] pstate: 81400005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 128.999384] pc : call_start+0x74/0x138 [sunrpc] [ 128.999809] lr : __rpc_execute+0xb8/0x3e0 [sunrpc] [ 129.000244] sp : ffff8000832b3a00 [ 129.000508] x29: ffff8000832b3a00 x28: ffff800081ac79c0 x27: ffff800081ac7000 [ 129.001111] x26: 0000000004248060 x25: 0000000000000000 x24: ffff800081596008 [ 129.001757] x23: ffff80007b087240 x22: ffff00009a509d30 x21: 0000000000000000 [ 129.002345] x20: ffff000090075600 x19: ffff00009a509d00 x18: ffffffffffffffff [ 129.002912] x17: 733d4d4554535953 x16: 42555300312d746e x15: ffff8000832b3a88 [ 129.003464] x14: ffffffffffffffff x13: ffff8000832b3a7d x12: 0000000000000008 [ 129.004021] x11: 0101010101010101 x10: ffff8000150cb560 x9 : ffff80007b087c00 [ 129.004577] x8 : ffff00009a509de0 x7 : 0000000000000000 x6 : 00000000be8c4ee3 [ 129.005026] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff000094d56680 [ 129.005425] x2 : ffff80007b0637f8 x1 : ffff000090075600 x0 : ffff00009a509d00 [ 129.005824] Call trace: [ 129.005967] call_start+0x74/0x138 [sunrpc] [ 129.006233] __rpc_execute+0xb8/0x3e0 [sunrpc] [ 129.006506] rpc_execute+0x160/0x1d8 [sunrpc] [ 129.006778] rpc_run_task+0x148/0x1f8 [sunrpc] [ 129.007204] tls_probe+0x80/0xd0 [sunrpc] [ 129.007460] rpc_ping+0x28/0x80 [sunrpc] [ 129.007715] rpc_create_xprt+0x134/0x1a0 [sunrpc] [ 129.007999] rpc_create+0x128/0x2a0 [sunrpc] [ 129.008264] xs_tcp_tls_setup_socket+0xdc/0x508 [sunrpc] [ 129.008583] process_one_work+0x174/0x3c8 [ 129.008813] worker_thread+0x2c8/0x3e0 [ 129.009033] kthread+0x100/0x110 [ 129.009225] ret_from_fork+0x10/0x20 [ 129.009432] Code: f0ffffc2 911fe042 aa1403e1 aa1303e0 (b9401c83) Fixes: 1548036 ("nfs: make the rpc_stat per net namespace") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

At the time of LPAR boot up, partition firmware provides Open Firmware property ibm,dma-window for the PE. This property is provided on the PCI bus the PE is attached to. There are execptions where the partition firmware might not provide this property for the PE at the time of LPAR boot up. One of the scenario is where the firmware has frozen the PE due to some error condition. This PE is frozen for 24 hours or unless the whole system is reinitialized. Within this time frame, if the LPAR is booted, the frozen PE will be presented to the LPAR but ibm,dma-window property could be missing. Today, under these circumstances, the LPAR oopses with NULL pointer dereference, when configuring the PCI bus the PE is attached to. BUG: Kernel NULL pointer dereference on read at 0x000000c8 Faulting instruction address: 0xc0000000001024c0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: Supported: Yes CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1 Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450 REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000822 XER: 00000000 CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0 ... NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0 LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 Call Trace: pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable) pcibios_setup_bus_self+0x1c0/0x370 __of_scan_bus+0x2f8/0x330 pcibios_scan_phb+0x280/0x3d0 pcibios_init+0x88/0x12c do_one_initcall+0x60/0x320 kernel_init_freeable+0x344/0x3e4 kernel_init+0x34/0x1d0 ret_from_kernel_user_thread+0x14/0x1c Fixes: b1fc44e ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window") Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240422205141.10662-1-gbatra@linux.ibm.com

…active The default nna (node_nr_active) is used when the pool isn't tied to a specific NUMA node. This can happen in the following cases: 1. On NUMA, if per-node pwq init failure and the fallback pwq is used. 2. On NUMA, if a pool is configured to span multiple nodes. 3. On single node setups. 5797b1c ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues") set the default nna->max to min_active because only #1 was being considered. For #2 and #3, using min_active means that the max concurrency in normal operation is pushed down to min_active which is currently 8, which can obviously lead to performance issues. exact value nna->max is set to doesn't really matter. #2 can only happen if the workqueue is intentionally configured to ignore NUMA boundaries and there's no good way to distribute max_active in this case. #3 is the default behavior on single node machines. Let's set it the default nna->max to max_active. This fixes the artificially lowered concurrency problem on single node machines and shouldn't hurt anything for other cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 5797b1c ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues") Link: https://lore.kernel.org/dm-devel/20240410084531.2134621-1-shinichiro.kawasaki@wdc.com/ Signed-off-by: Tejun Heo <tj@kernel.org>

[ Upstream commit 9445878 ] The hfsplus_readdir() method is capable to crash by calling hfsplus_uni2asc(): [ 667.121659][ T9805] ================================================================== [ 667.122651][ T9805] BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0x902/0xa10 [ 667.123627][ T9805] Read of size 2 at addr ffff88802592f40c by task repro/9805 [ 667.124578][ T9805] [ 667.124876][ T9805] CPU: 3 UID: 0 PID: 9805 Comm: repro Not tainted 6.16.0-rc3 #1 PREEMPT(full) [ 667.124886][ T9805] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 667.124890][ T9805] Call Trace: [ 667.124893][ T9805] <TASK> [ 667.124896][ T9805] dump_stack_lvl+0x10e/0x1f0 [ 667.124911][ T9805] print_report+0xd0/0x660 [ 667.124920][ T9805] ? __virt_addr_valid+0x81/0x610 [ 667.124928][ T9805] ? __phys_addr+0xe8/0x180 [ 667.124934][ T9805] ? hfsplus_uni2asc+0x902/0xa10 [ 667.124942][ T9805] kasan_report+0xc6/0x100 [ 667.124950][ T9805] ? hfsplus_uni2asc+0x902/0xa10 [ 667.124959][ T9805] hfsplus_uni2asc+0x902/0xa10 [ 667.124966][ T9805] ? hfsplus_bnode_read+0x14b/0x360 [ 667.124974][ T9805] hfsplus_readdir+0x845/0xfc0 [ 667.124984][ T9805] ? __pfx_hfsplus_readdir+0x10/0x10 [ 667.124994][ T9805] ? stack_trace_save+0x8e/0xc0 [ 667.125008][ T9805] ? iterate_dir+0x18b/0xb20 [ 667.125015][ T9805] ? trace_lock_acquire+0x85/0xd0 [ 667.125022][ T9805] ? lock_acquire+0x30/0x80 [ 667.125029][ T9805] ? iterate_dir+0x18b/0xb20 [ 667.125037][ T9805] ? down_read_killable+0x1ed/0x4c0 [ 667.125044][ T9805] ? putname+0x154/0x1a0 [ 667.125051][ T9805] ? __pfx_down_read_killable+0x10/0x10 [ 667.125058][ T9805] ? apparmor_file_permission+0x239/0x3e0 [ 667.125069][ T9805] iterate_dir+0x296/0xb20 [ 667.125076][ T9805] __x64_sys_getdents64+0x13c/0x2c0 [ 667.125084][ T9805] ? __pfx___x64_sys_getdents64+0x10/0x10 [ 667.125091][ T9805] ? __x64_sys_openat+0x141/0x200 [ 667.125126][ T9805] ? __pfx_filldir64+0x10/0x10 [ 667.125134][ T9805] ? do_user_addr_fault+0x7fe/0x12f0 [ 667.125143][ T9805] do_syscall_64+0xc9/0x480 [ 667.125151][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.125158][ T9805] RIP: 0033:0x7fa8753b2fc9 [ 667.125164][ T9805] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 48 [ 667.125172][ T9805] RSP: 002b:00007ffe96f8e0f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000d9 [ 667.125181][ T9805] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa8753b2fc9 [ 667.125185][ T9805] RDX: 0000000000000400 RSI: 00002000000063c0 RDI: 0000000000000004 [ 667.125190][ T9805] RBP: 00007ffe96f8e110 R08: 00007ffe96f8e110 R09: 00007ffe96f8e110 [ 667.125195][ T9805] R10: 0000000000000000 R11: 0000000000000217 R12: 0000556b1e3b4260 [ 667.125199][ T9805] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 667.125207][ T9805] </TASK> [ 667.125210][ T9805] [ 667.145632][ T9805] Allocated by task 9805: [ 667.145991][ T9805] kasan_save_stack+0x20/0x40 [ 667.146352][ T9805] kasan_save_track+0x14/0x30 [ 667.146717][ T9805] __kasan_kmalloc+0xaa/0xb0 [ 667.147065][ T9805] __kmalloc_noprof+0x205/0x550 [ 667.147448][ T9805] hfsplus_find_init+0x95/0x1f0 [ 667.147813][ T9805] hfsplus_readdir+0x220/0xfc0 [ 667.148174][ T9805] iterate_dir+0x296/0xb20 [ 667.148549][ T9805] __x64_sys_getdents64+0x13c/0x2c0 [ 667.148937][ T9805] do_syscall_64+0xc9/0x480 [ 667.149291][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.149809][ T9805] [ 667.150030][ T9805] The buggy address belongs to the object at ffff88802592f000 [ 667.150030][ T9805] which belongs to the cache kmalloc-2k of size 2048 [ 667.151282][ T9805] The buggy address is located 0 bytes to the right of [ 667.151282][ T9805] allocated 1036-byte region [ffff88802592f000, ffff88802592f40c) [ 667.152580][ T9805] [ 667.152798][ T9805] The buggy address belongs to the physical page: [ 667.153373][ T9805] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25928 [ 667.154157][ T9805] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 667.154916][ T9805] anon flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff) [ 667.155631][ T9805] page_type: f5(slab) [ 667.155997][ T9805] raw: 00fff00000000040 ffff88801b442f00 0000000000000000 dead000000000001 [ 667.156770][ T9805] raw: 0000000000000000 0000000080080008 00000000f5000000 0000000000000000 [ 667.157536][ T9805] head: 00fff00000000040 ffff88801b442f00 0000000000000000 dead000000000001 [ 667.158317][ T9805] head: 0000000000000000 0000000080080008 00000000f5000000 0000000000000000 [ 667.159088][ T9805] head: 00fff00000000003 ffffea0000964a01 00000000ffffffff 00000000ffffffff [ 667.159865][ T9805] head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 [ 667.160643][ T9805] page dumped because: kasan: bad access detected [ 667.161216][ T9805] page_owner tracks the page as allocated [ 667.161732][ T9805] page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN9 [ 667.163566][ T9805] post_alloc_hook+0x1c0/0x230 [ 667.164003][ T9805] get_page_from_freelist+0xdeb/0x3b30 [ 667.164503][ T9805] __alloc_frozen_pages_noprof+0x25c/0x2460 [ 667.165040][ T9805] alloc_pages_mpol+0x1fb/0x550 [ 667.165489][ T9805] new_slab+0x23b/0x340 [ 667.165872][ T9805] ___slab_alloc+0xd81/0x1960 [ 667.166313][ T9805] __slab_alloc.isra.0+0x56/0xb0 [ 667.166767][ T9805] __kmalloc_cache_noprof+0x255/0x3e0 [ 667.167255][ T9805] psi_cgroup_alloc+0x52/0x2d0 [ 667.167693][ T9805] cgroup_mkdir+0x694/0x1210 [ 667.168118][ T9805] kernfs_iop_mkdir+0x111/0x190 [ 667.168568][ T9805] vfs_mkdir+0x59b/0x8d0 [ 667.168956][ T9805] do_mkdirat+0x2ed/0x3d0 [ 667.169353][ T9805] __x64_sys_mkdir+0xef/0x140 [ 667.169784][ T9805] do_syscall_64+0xc9/0x480 [ 667.170195][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.170730][ T9805] page last free pid 1257 tgid 1257 stack trace: [ 667.171304][ T9805] __free_frozen_pages+0x80c/0x1250 [ 667.171770][ T9805] vfree.part.0+0x12b/0xab0 [ 667.172182][ T9805] delayed_vfree_work+0x93/0xd0 [ 667.172612][ T9805] process_one_work+0x9b5/0x1b80 [ 667.173067][ T9805] worker_thread+0x630/0xe60 [ 667.173486][ T9805] kthread+0x3a8/0x770 [ 667.173857][ T9805] ret_from_fork+0x517/0x6e0 [ 667.174278][ T9805] ret_from_fork_asm+0x1a/0x30 [ 667.174703][ T9805] [ 667.174917][ T9805] Memory state around the buggy address: [ 667.175411][ T9805] ffff88802592f300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 667.176114][ T9805] ffff88802592f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 667.176830][ T9805] >ffff88802592f400: 00 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 667.177547][ T9805] ^ [ 667.177933][ T9805] ffff88802592f480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 667.178640][ T9805] ffff88802592f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 667.179350][ T9805] ================================================================== The hfsplus_uni2asc() method operates by struct hfsplus_unistr: struct hfsplus_unistr { __be16 length; hfsplus_unichr unicode[HFSPLUS_MAX_STRLEN]; } __packed; where HFSPLUS_MAX_STRLEN is 255 bytes. The issue happens if length of the structure instance has value bigger than 255 (for example, 65283). In such case, pointer on unicode buffer is going beyond of the allocated memory. The patch fixes the issue by checking the length value of hfsplus_unistr instance and using 255 value in the case if length value is bigger than HFSPLUS_MAX_STRLEN. Potential reason of such situation could be a corruption of Catalog File b-tree's node. Reported-by: Wenzhi Wang <wenzhi.wang@uwaterloo.ca> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> cc: Yangtao Li <frank.li@vivo.com> cc: linux-fsdevel@vger.kernel.org Reviewed-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20250710230830.110500-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 87c6efc upstream. Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify() after recent changes from Lion [2]. The problem is: in ets_qdisc_change() we purge unused DWRR queues; the value of 'q->nbands' is the new one, and the cleanup should be done with the old one. The problem is here since my first attempts to fix ets_qdisc_change(), but it surfaced again after the recent qdisc len accounting fixes. Fix it purging idle DWRR queues before assigning a new value of 'q->nbands', so that all purge operations find a consistent configuration: - old 'q->nbands' because it's needed by ets_class_find() - old 'q->nstrict' because it's needed by ets_class_is_strict() BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 62 UID: 0 PID: 39457 Comm: tc Kdump: loaded Not tainted 6.12.0-116.el10.x86_64 #1 PREEMPT(voluntary) Hardware name: Dell Inc. PowerEdge R640/06DKY5, BIOS 2.12.2 07/09/2021 RIP: 0010:__list_del_entry_valid_or_report+0x4/0x80 Code: ff 4c 39 c7 0f 84 39 19 8e ff b8 01 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <48> 8b 17 48 8b 4f 08 48 85 d2 0f 84 56 19 8e ff 48 85 c9 0f 84 ab RSP: 0018:ffffba186009f400 EFLAGS: 00010202 RAX: 00000000000000d6 RBX: 0000000000000000 RCX: 0000000000000004 RDX: ffff9f0fa29b69c0 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffffffc12c2400 R08: 0000000000000008 R09: 0000000000000004 R10: ffffffffffffffff R11: 0000000000000004 R12: 0000000000000000 R13: ffff9f0f8cfe0000 R14: 0000000000100005 R15: 0000000000000000 FS: 00007f2154f37480(0000) GS:ffff9f269c1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001530be001 CR4: 00000000007726f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ets_class_qlen_notify+0x65/0x90 [sch_ets] qdisc_tree_reduce_backlog+0x74/0x110 ets_qdisc_change+0x630/0xa40 [sch_ets] __tc_modify_qdisc.constprop.0+0x216/0x7f0 tc_modify_qdisc+0x7c/0x120 rtnetlink_rcv_msg+0x145/0x3f0 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x245/0x390 netlink_sendmsg+0x21b/0x470 ____sys_sendmsg+0x39d/0x3d0 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x7d/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f2155114084 Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d 25 f0 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 RSP: 002b:00007fff1fd7a988 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000560ec063e5e0 RCX: 00007f2155114084 RDX: 0000000000000000 RSI: 00007fff1fd7a9f0 RDI: 0000000000000003 RBP: 00007fff1fd7aa60 R08: 0000000000000010 R09: 000000000000003f R10: 0000560ee9b3a010 R11: 0000000000000202 R12: 00007fff1fd7aae0 R13: 000000006891ccde R14: 0000560ec063e5e0 R15: 00007fff1fd7aad0 </TASK> [1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/ [2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/ Cc: stable@vger.kernel.org Fixes: 103406b ("net/sched: Always pass notifications when child class becomes empty") Fixes: c062f2a ("net/sched: sch_ets: don't remove idle classes from the round-robin list") Fixes: dcc68b4 ("net: sch_ets: Add a new Qdisc") Reported-by: Li Shuang <shuali@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-108026 Reviewed-by: Petr Machata <petrm@nvidia.com> Co-developed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://patch.msgid.link/7928ff6d17db47a2ae7cc205c44777b1f1950545.1755016081.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 33caa20 upstream. The existing code move the VF NIC to new namespace when NETDEV_REGISTER is received on netvsc NIC. During deletion of the namespace, default_device_exit_batch() >> default_device_exit_net() is called. When netvsc NIC is moved back and registered to the default namespace, it automatically brings VF NIC back to the default namespace. This will cause the default_device_exit_net() >> for_each_netdev_safe loop unable to detect the list end, and hit NULL ptr: [ 231.449420] mana 7870:00:00.0 enP30832s1: Moved VF to namespace with: eth0 [ 231.449656] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 231.450246] #PF: supervisor read access in kernel mode [ 231.450579] #PF: error_code(0x0000) - not-present page [ 231.450916] PGD 17b8a8067 P4D 0 [ 231.451163] Oops: Oops: 0000 [#1] SMP NOPTI [ 231.451450] CPU: 82 UID: 0 PID: 1394 Comm: kworker/u768:1 Not tainted 6.16.0-rc4+ #3 VOLUNTARY [ 231.452042] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 231.452692] Workqueue: netns cleanup_net [ 231.452947] RIP: 0010:default_device_exit_batch+0x16c/0x3f0 [ 231.453326] Code: c0 0c f5 b3 e8 d5 db fe ff 48 85 c0 74 15 48 c7 c2 f8 fd ca b2 be 10 00 00 00 48 8d 7d c0 e8 7b 77 25 00 49 8b 86 28 01 00 00 <48> 8b 50 10 4c 8b 2a 4c 8d 62 f0 49 83 ed 10 4c 39 e0 0f 84 d6 00 [ 231.454294] RSP: 0018:ff75fc7c9bf9fd00 EFLAGS: 00010246 [ 231.454610] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 61c8864680b583eb [ 231.455094] RDX: ff1fa9f71462d800 RSI: ff75fc7c9bf9fd38 RDI: 0000000030766564 [ 231.455686] RBP: ff75fc7c9bf9fd78 R08: 0000000000000000 R09: 0000000000000000 [ 231.456126] R10: 0000000000000001 R11: 0000000000000004 R12: ff1fa9f70088e340 [ 231.456621] R13: ff1fa9f70088e340 R14: ffffffffb3f50c20 R15: ff1fa9f7103e6340 [ 231.457161] FS: 0000000000000000(0000) GS:ff1faa6783a08000(0000) knlGS:0000000000000000 [ 231.457707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.458031] CR2: 0000000000000010 CR3: 0000000179ab2006 CR4: 0000000000b73ef0 [ 231.458434] Call Trace: [ 231.458600] <TASK> [ 231.458777] ops_undo_list+0x100/0x220 [ 231.459015] cleanup_net+0x1b8/0x300 [ 231.459285] process_one_work+0x184/0x340 To fix it, move the ns change to a workqueue, and take rtnl_lock to avoid changing the netdev list when default_device_exit_net() is using it. Cc: stable@vger.kernel.org Fixes: 4c26280 ("hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1754511711-11188-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7f8fdd4 upstream. When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com [ adapted to inline code structure without separate serial8250_initialize helper function ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ffc47f upstream. Since the CAAM on these SoCs is managed by another ARM core, called the SECO (Security Controller) on iMX8QM and Secure Enclave on iMX8ULP, which also reserves access to register page 0 suspend operations cannot touch this page. This is similar to when running OPTEE, where OPTEE will reserve page 0. Track this situation using a new state variable no_page0, reflecting if page 0 is reserved elsewhere, either by other management cores in SoC or by OPTEE. Replace the optee_en check in suspend/resume with the new check. optee_en cannot go away as it's needed elsewhere to gate OPTEE specific situations. Fixes the following splat at suspend: Internal error: synchronous external abort: 0000000096000010 [#1] SMP Hardware name: Freescale i.MX8QXP ACU6C (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : readl+0x0/0x18 lr : rd_reg32+0x18/0x3c sp : ffffffc08192ba20 x29: ffffffc08192ba20 x28: ffffff8025190000 x27: 0000000000000000 x26: ffffffc0808ae808 x25: ffffffc080922338 x24: ffffff8020e89090 x23: 0000000000000000 x22: ffffffc080922000 x21: ffffff8020e89010 x20: ffffffc080387ef8 x19: ffffff8020e89010 x18: 000000005d8000d5 x17: 0000000030f35963 x16: 000000008f785f3f x15: 000000003b8ef57c x14: 00000000c418aef8 x13: 00000000f5fea526 x12: 0000000000000001 x11: 0000000000000002 x10: 0000000000000001 x9 : 0000000000000000 x8 : ffffff8025190870 x7 : ffffff8021726880 x6 : 0000000000000002 x5 : ffffff80217268f0 x4 : ffffff8021726880 x3 : ffffffc081200000 x2 : 0000000000000001 x1 : ffffff8020e89010 x0 : ffffffc081200004 Call trace: readl+0x0/0x18 caam_ctrl_suspend+0x30/0xdc dpm_run_callback.constprop.0+0x24/0x5c device_suspend+0x170/0x2e8 dpm_suspend+0xa0/0x104 dpm_suspend_start+0x48/0x50 suspend_devices_and_enter+0x7c/0x45c pm_suspend+0x148/0x160 state_store+0xb4/0xf8 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x38/0x48 kernfs_fop_write_iter+0xb4/0x178 vfs_write+0x118/0x178 ksys_write+0x6c/0xd0 __arm64_sys_write+0x14/0x1c invoke_syscall.constprop.0+0x64/0xb0 do_el0_svc+0x90/0xb0 el0_svc+0x18/0x44 el0t_64_sync_handler+0x88/0x124 el0t_64_sync+0x150/0x154 Code: 88dffc21 88dffc21 5ac00800 d65f03c0 (b9400000) Fixes: d283570 ("crypto: caam - i.MX8ULP donot have CAAM page0 access") Cc: stable@kernel.org # v6.10+ Signed-off-by: John Ernberg <john.ernberg@actia.se> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d79123d upstream. Doing a list_del() on the epf_group field of struct pci_epf_driver in pci_epf_remove_cfs() is not correct as this field is a list head, not a list entry. This list_del() call triggers a KASAN warning when an endpoint function driver which has a configfs attribute group is torn down: ================================================================== BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198 Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319 CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONE Hardware name: Radxa ROCK 5B (DT) Call trace: show_stack+0x2c/0x84 (C) dump_stack_lvl+0x70/0x98 print_report+0x17c/0x538 kasan_report+0xb8/0x190 __asan_report_store8_noabort+0x20/0x2c pci_epf_remove_cfs+0x17c/0x198 pci_epf_unregister_driver+0x18/0x30 nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf] __arm64_sys_delete_module+0x264/0x424 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xac/0x230 do_el0_svc+0x40/0x58 el0_svc+0x48/0xdc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ... Remove this incorrect list_del() call from pci_epf_remove_cfs(). Fixes: ef1433f ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250624114544.342159-2-dlemoal@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7af76e9 upstream. Receiving HSR frame with insufficient space to hold HSR tag in the skb can result in a crash (kernel BUG): [ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1 [ 45.392559] ------------[ cut here ]------------ [ 45.392912] kernel BUG at net/core/skbuff.c:211! [ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 torvalds#12 PREEMPT(undef) [ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0 <snip registers, remove unreliable trace> [ 45.402911] Call Trace: [ 45.403105] <IRQ> [ 45.404470] skb_push+0xcd/0xf0 [ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0 [ 45.406513] br_forward_finish+0x128/0x260 [ 45.408483] __br_forward+0x42d/0x590 [ 45.409464] maybe_deliver+0x2eb/0x420 [ 45.409763] br_flood+0x174/0x4a0 [ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0 [ 45.411618] br_handle_frame+0xac3/0x1230 [ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0 [ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0 [ 45.424478] __netif_receive_skb+0x22/0x170 [ 45.424806] process_backlog+0x242/0x6d0 [ 45.425116] __napi_poll+0xbb/0x630 [ 45.425394] net_rx_action+0x4d1/0xcc0 [ 45.427613] handle_softirqs+0x1a4/0x580 [ 45.427926] do_softirq+0x74/0x90 [ 45.428196] </IRQ> This issue was found by syzkaller. The panic happens in br_dev_queue_push_xmit() once it receives a corrupted skb with ETH header already pushed in linear data. When it attempts the skb_push() call, there's not enough headroom and skb_push() panics. The corrupted skb is put on the queue by HSR layer, which makes a sequence of unintended transformations when it receives a specific corrupted HSR frame (with incomplete TAG). Fix it by dropping and consuming frames that are not long enough to contain both ethernet and hsr headers. Alternative fix would be to check for enough headroom before skb_push() in br_dev_queue_push_xmit(). In the reproducer, this is injected via AF_PACKET, but I don't easily see why it couldn't be sent over the wire from adjacent network. Further Details: In the reproducer, the following network interface chain is set up: ┌────────────────┐ ┌────────────────┐ │ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐ └────────────────┘ └────────────────┘ │ │ ┌──────┐ ├─┤ hsr0 ├───┐ │ └──────┘ │ ┌────────────────┐ ┌────────────────┐ │ │┌────────┐ │ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │ └────────────────┘ └────────────────┘ ┌┼ bridge │ ││ │ │└────────┘ │ ┌───────┐ │ │ ... ├──────┘ └───────┘ To trigger the events leading up to crash, reproducer sends a corrupted HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'. The first HSR-layer function to process this frame is hsr_handle_frame(). It and then checks if the protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that the skb is long enough. For the crashing frame it is not, and hence the skb->network_header and skb->mac_len fields are set incorrectly, pointing after the end of the linear buffer. I will call this a BUG#1 and it is what is addressed by this patch. In the crashing scenario before the fix, the skb continues to go down the hsr path as follows. hsr_handle_frame() then calls this sequence hsr_forward_skb() fill_frame_info() hsr->proto_ops->fill_frame_info() hsr_fill_frame_info() hsr_fill_frame_info() contains a check that intends to check whether the skb actually contains the HSR header. But the check relies on the skb->mac_len field which was erroneously setup due to BUG#1, so the check passes and the execution continues back in the hsr_forward_skb(): hsr_forward_skb() hsr_forward_do() hsr->proto_ops->get_untagged_frame() hsr_get_untagged_frame() create_stripped_skb_hsr() In create_stripped_skb_hsr(), a copy of the skb is created and is further corrupted by operation that attempts to strip the HSR tag in a call to __pskb_copy(). The skb enters create_stripped_skb_hsr() with ethernet header pushed in linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of ethernet header into the headroom, creating skb_in with a headroom of size 8. The subsequent __pskb_copy() then creates an skb with headroom of just 2 and skb->len of just 12, this is how it looks after the copy: gdb) p skb->len $10 = 12 (gdb) p skb->data $11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373", (gdb) p skb->head $12 = (unsigned char *) 0xffff888041e45380 "" It seems create_stripped_skb_hsr() assumes that ETH header is pulled in the headroom when it's entered, because it just pulls HSR header on top. But that is not the case in our code-path and we end up with the corrupted skb instead. I will call this BUG#2 *I got confused here because it seems that under no conditions can create_stripped_skb_hsr() work well, the assumption it makes is not true during the processing of hsr frames - since the skb_push() in hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I missed something here.* Next, the execution arrives in hsr_deliver_master(). It calls skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have enough space for the pull (as it only has 12 bytes in total at this point). *The skb_pull() here further suggests that ethernet header is meant to be pushed through the whole hsr processing and create_stripped_skb_hsr() should pull it before doing the HSR header pull.* hsr_deliver_master() then puts the corrupted skb on the queue, it is then picked up from there by bridge frame handling layer and finally lands in br_dev_queue_push_xmit where it panics. Cc: stable@kernel.org Fixes: 48b491a ("net: hsr: fix mac_len checks") Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com Signed-off-by: Jakub Acs <acsjakub@amazon.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7e6c313 upstream. damon_migrate_pages() tries migration even if the target node is invalid. If users mistakenly make such invalid requests via DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen. [ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48 [ 7831.884160] #PF: supervisor read access in kernel mode [ 7831.884681] #PF: error_code(0x0000) - not-present page [ 7831.885203] PGD 0 P4D 0 [ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI [ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ torvalds#93 PREEMPT(voluntary) [ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014 [ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137) [...] [ 7831.895953] Call Trace: [ 7831.896195] <TASK> [ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192) [ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851) [ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.897735] migrate_pages (mm/migrate.c:2078) [ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354) [ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405) [...] Add a target node validity check in damon_migrate_pages(). The validity check is stolen from that of do_pages_move(), which is being used for the move_pages() system call. Link: https://lkml.kernel.org/r/20250720185822.1451-1-sj@kernel.org Fixes: b51820e ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") [6.11.x] Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Honggyu Kim <honggyu.kim@sk.com> Cc: Hyeongtak Ji <hyeongtak.ji@sk.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dde3085 upstream. The mm/debug_vm_pagetable test allocates manually page table entries for the tests it runs, using also its manually allocated mm_struct. That in itself is ok, but when it exits, at destroy_args() it fails to clear those entries with the *_clear functions. The problem is that leaves stale entries. If another process allocates an mm_struct with a pgd at the same address, it may end up running into the stale entry. This is happening in practice on a debug kernel with CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra debugging I added (it prints a warning trace if pgtables_bytes goes negative, in addition to the warning at check_mm() function): [ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000 [ 2.539366] kmem_cache info [ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508 [ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e (...) [ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0 [ 2.552816] Modules linked in: [ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY [ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries [ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90 [ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug) [ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a [ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0 [ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001 [ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff [ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000 [ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb [ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0 [ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000 [ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001 [ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760 [ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0 [ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0 [ 2.553199] Call Trace: [ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable) [ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0 [ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570 [ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650 [ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290 [ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0 [ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870 [ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150 [ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50 [ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0 [ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec (...) [ 2.558892] ---[ end trace 0000000000000000 ]--- [ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1 [ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144 Here the modprobe process ended up with an allocated mm_struct from the mm_struct slab that was used before by the debug_vm_pgtable test. That is not a problem, since the mm_struct is initialized again etc., however, if it ends up using the same pgd table, it bumps into the old stale entry when clearing/freeing the page table entries, so it tries to free an entry already gone (that one which was allocated by the debug_vm_pgtable test), which also explains the negative pgtables_bytes since it's accounting for not allocated entries in the current process. As far as I looked pgd_{alloc,free} etc. does not clear entries, and clearing of the entries is explicitly done in the free_pgtables-> free_pgd_range->free_p4d_range->free_pud_range->free_pmd_range-> free_pte_range path. However, the debug_vm_pgtable test does not call free_pgtables, since it allocates mm_struct and entries manually for its test and eg. not goes through page faults. So it also should clear manually the entries before exit at destroy_args(). This problem was noticed on a reboot X number of times test being done on a powerpc host, with a debug kernel with CONFIG_DEBUG_VM_PGTABLE enabled. Depends on the system, but on a 100 times reboot loop the problem could manifest once or twice, if a process ends up getting the right mm->pgd entry with the stale entries used by mm/debug_vm_pagetable. After using this patch, I couldn't reproduce/experience the problems anymore. I was able to reproduce the problem as well on latest upstream kernel (6.16). I also modified destroy_args() to use mmput() instead of mmdrop(), there is no reason to hold mm_users reference and not release the mm_struct entirely, and in the output above with my debugging prints I already had patched it to use mmput, it did not fix the problem, but helped in the debugging as well. Link: https://lkml.kernel.org/r/20250731214051.4115182-1-herton@redhat.com Fixes: 3c9b84f ("mm/debug_vm_pgtable: introduce struct pgtable_debug_args") Signed-off-by: Herton R. Krzesinski <herton@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Gavin Shan <gshan@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b151136 ] btrfs_subpage_set_writeback() calls folio_start_writeback() the first time a folio is written back, and it also clears the PAGECACHE_TAG_TOWRITE tag even if there are still dirty blocks in the folio. This can break ordering guarantees, such as those required by btrfs_wait_ordered_extents(). That ordering breakage leads to a real failure. For example, running generic/464 on a zoned setup will hit the following ASSERT. This happens because the broken ordering fails to flush existing dirty pages before the file size is truncated. assertion failed: !list_empty(&ordered->list) :: 0, in fs/btrfs/zoned.c:1899 ------------[ cut here ]------------ kernel BUG at fs/btrfs/zoned.c:1899! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 1906169 Comm: kworker/u130:2 Kdump: loaded Not tainted 6.16.0-rc6-BTRFS-ZNS+ torvalds#554 PREEMPT(voluntary) Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_finish_ordered_zoned.cold+0x50/0x52 [btrfs] RSP: 0018:ffffc9002efdbd60 EFLAGS: 00010246 RAX: 000000000000004c RBX: ffff88811923c4e0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff827e38b1 RDI: 00000000ffffffff RBP: ffff88810005d000 R08: 00000000ffffdfff R09: ffffffff831051c8 R10: ffffffff83055220 R11: 0000000000000000 R12: ffff8881c2458c00 R13: ffff88811923c540 R14: ffff88811923c5e8 R15: ffff8881c1bd9680 FS: 0000000000000000(0000) GS:ffff88a04acd0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f907c7a918c CR3: 0000000004024000 CR4: 0000000000350ef0 Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f btrfs_finish_ordered_io+0x4a/0x60 [btrfs] btrfs_work_helper+0xf9/0x490 [btrfs] process_one_work+0x204/0x590 ? srso_return_thunk+0x5/0x5f worker_thread+0x1d6/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x118/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x205/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Consider process A calling writepages() with WB_SYNC_NONE. In zoned mode or for compressed writes, it locks several folios for delalloc and starts writing them out. Let's call the last locked folio folio X. Suppose the write range only partially covers folio X, leaving some pages dirty. Process A calls btrfs_subpage_set_writeback() when building a bio. This function call clears the TOWRITE tag of folio X, whose size = 8K and the block size = 4K. It is following state. 0 4K 8K |/////|/////| (flag: DIRTY, tag: DIRTY) <-----> Process A will write this range. Now suppose process B concurrently calls writepages() with WB_SYNC_ALL. It calls tag_pages_for_writeback() to tag dirty folios with PAGECACHE_TAG_TOWRITE. Since folio X is still dirty, it gets tagged. Then, B collects tagged folios using filemap_get_folios_tag() and must wait for folio X to be written before returning from writepages(). 0 4K 8K |/////|/////| (flag: DIRTY, tag: DIRTY|TOWRITE) However, between tagging and collecting, process A may call btrfs_subpage_set_writeback() and clear folio X's TOWRITE tag. 0 4K 8K | |/////| (flag: DIRTY|WRITEBACK, tag: DIRTY) As a result, process B won't see folio X in its batch, and returns without waiting for it. This breaks the WB_SYNC_ALL ordering requirement. Fix this by using btrfs_subpage_set_writeback_keepwrite(), which retains the TOWRITE tag. We now manually clear the tag only after the folio becomes clean, via the xas operation. Fixes: 3470da3 ("btrfs: subpage: introduce helpers for writeback status") CC: stable@vger.kernel.org # 6.12+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> [ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d9cef55 ] BPF CI testing report a UAF issue: [ 16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003 0 [ 16.447134] #PF: supervisor read access in kernel mod e [ 16.447516] #PF: error_code(0x0000) - not-present pag e [ 16.447878] PGD 0 P4D 0 [ 16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT I [ 16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G OE 6.13.0-rc3-g89e8a75fda73-dirty #4 2 [ 16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL E [ 16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201 4 [ 16.450201] Workqueue: smc_hs_wq smc_listen_wor k [ 16.450531] RIP: 0010:smc_listen_work+0xc02/0x159 0 [ 16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024 6 [ 16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030 0 [ 16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000 0 [ 16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000 5 [ 16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640 0 [ 16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092 0 [ 16.454996] FS: 0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000 0 [ 16.455557] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 3 [ 16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef 0 [ 16.456459] PKRU: 5555555 4 [ 16.456654] Call Trace : [ 16.456832] <TASK > [ 16.456989] ? __die+0x23/0x7 0 [ 16.457215] ? page_fault_oops+0x180/0x4c 0 [ 16.457508] ? __lock_acquire+0x3e6/0x249 0 [ 16.457801] ? exc_page_fault+0x68/0x20 0 [ 16.458080] ? asm_exc_page_fault+0x26/0x3 0 [ 16.458389] ? smc_listen_work+0xc02/0x159 0 [ 16.458689] ? smc_listen_work+0xc02/0x159 0 [ 16.458987] ? lock_is_held_type+0x8f/0x10 0 [ 16.459284] process_one_work+0x1ea/0x6d 0 [ 16.459570] worker_thread+0x1c3/0x38 0 [ 16.459839] ? __pfx_worker_thread+0x10/0x1 0 [ 16.460144] kthread+0xe0/0x11 0 [ 16.460372] ? __pfx_kthread+0x10/0x1 0 [ 16.460640] ret_from_fork+0x31/0x5 0 [ 16.460896] ? __pfx_kthread+0x10/0x1 0 [ 16.461166] ret_from_fork_asm+0x1a/0x3 0 [ 16.461453] </TASK > [ 16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE) ] [ 16.462134] CR2: 000000000000003 0 [ 16.462380] ---[ end trace 0000000000000000 ]--- [ 16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590 The direct cause of this issue is that after smc_listen_out_connected(), newclcsock->sk may be NULL since it will releases the smcsk. Therefore, if the application closes the socket immediately after accept, newclcsock->sk can be NULL. A possible execution order could be as follows: smc_listen_work | userspace ----------------------------------------------------------------- lock_sock(sk) | smc_listen_out_connected() | | \- smc_listen_out | | | \- release_sock | | |- sk->sk_data_ready() | | fd = accept(); | close(fd); | \- socket->sk = NULL; /* newclcsock->sk is NULL now */ SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk)) Since smc_listen_out_connected() will not fail, simply swapping the order of the code can easily fix this issue. Fixes: 3b2dec2 ("net/smc: restructure client and server code in af_smc") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Link: https://patch.msgid.link/20250818054618.41615-1-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…sizes The bo/ttm interfaces with kernel memory mapping from dedicated GPU memory. It is not correct to assume that SZ_4K would suffice for page alignment as there are a few hardware platforms that commonly uses non-4K pages - for instance, currently, Loongson 3A5000/6000 devices (of the LoongArch architecture) commonly uses 16K kernel pages. Per my testing Intel Xe/Arc families of GPUs works on at least Loongson 3A6000 platforms so long as "Above 4G Decoding" and "Resizable BAR" were enabled in the EFI firmware settings. I tested this patch series on my Loongson XA61200 (3A6000) motherboard with an Intel Arc A750 GPU. Without this fix, the kernel will hang at a kernel BUG(): [ 7.425445] ------------[ cut here ]------------ [ 7.430032] kernel BUG at drivers/gpu/drm/drm_gem.c:181! [ 7.435330] Oops - BUG[#1]: [ 7.438099] CPU: 0 UID: 0 PID: 102 Comm: kworker/0:4 Tainted: G E 6.13.3-aosc-main-00336-g60829239b300-dirty #3 [ 7.449511] Tainted: [E]=UNSIGNED_MODULE [ 7.453402] Hardware name: Loongson Loongson-3A6000-HV-7A2000-1w-V0.1-EVB/Loongson-3A6000-HV-7A2000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V4.0.05756-prestab [ 7.467144] Workqueue: events work_for_cpu_fn [ 7.471472] pc 9000000001045fa4 ra ffff8000025331dc tp 90000001010c8000 sp 90000001010cb960 [ 7.479770] a0 900000012a3e8000 a1 900000010028c000 a2 000000000005d000 a3 0000000000000000 [ 7.488069] a4 0000000000000000 a5 0000000000000000 a6 0000000000000000 a7 0000000000000001 [ 7.496367] t0 0000000000001000 t1 9000000001045000 t2 0000000000000000 t3 0000000000000000 [ 7.504665] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 7.504667] t8 0000000000000000 u0 90000000029ea7d8 s9 900000012a3e9360 s0 900000010028c000 [ 7.504668] s1 ffff800002744000 s2 0000000000000000 s3 0000000000000000 s4 0000000000000001 [ 7.504669] s5 900000012a3e8000 s6 0000000000000001 s7 0000000000022022 s8 0000000000000000 [ 7.537855] ra: ffff8000025331dc ___xe_bo_create_locked+0x158/0x3b0 [xe] [ 7.544893] ERA: 9000000001045fa4 drm_gem_private_object_init+0xcc/0xd0 [ 7.551639] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 7.557785] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 7.562111] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 7.566870] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 7.571628] ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) [ 7.577163] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) [ 7.583128] Modules linked in: xe(E+) drm_gpuvm(E) drm_exec(E) drm_buddy(E) gpu_sched(E) drm_suballoc_helper(E) drm_display_helper(E) loongson(E) r8169(E) cec(E) rc_core(E) realtek(E) i2c_algo_bit(E) tpm_tis_spi(E) led_class(E) hid_generic(E) drm_ttm_helper(E) ttm(E) drm_client_lib(E) drm_kms_helper(E) sunrpc(E) la_ow_syscall(E) i2c_dev(E) [ 7.613049] Process kworker/0:4 (pid: 102, threadinfo=00000000bc26ebd1, task=0000000055480707) [ 7.621606] Stack : 0000000000000000 3030303a6963702b 000000000005d000 0000000000000000 [ 7.629563] 0000000000000001 0000000000000000 0000000000000000 8e1bfae42b2f7877 [ 7.637519] 000000000005d000 900000012a3e8000 900000012a3e9360 0000000000000000 [ 7.645475] ffffffffffffffff 0000000000000000 0000000000022022 0000000000000000 [ 7.653431] 0000000000000001 ffff800002533660 0000000000022022 9000000000234470 [ 7.661386] 90000001010cba28 0000000000001000 0000000000000000 000000000005c300 [ 7.669342] 900000012a3e8000 0000000000000000 0000000000000001 900000012a3e8000 [ 7.677298] ffffffffffffffff 0000000000022022 900000012a3e9498 ffff800002533a14 [ 7.685254] 0000000000022022 0000000000000000 900000000209c000 90000000010589e0 [ 7.693209] 90000001010cbab8 ffff8000027c78c0 fffffffffffff000 900000012a3e8000 [ 7.701165] ... [ 7.703588] Call Trace: [ 7.703590] [<9000000001045fa4>] drm_gem_private_object_init+0xcc/0xd0 [ 7.712496] [<ffff8000025331d8>] ___xe_bo_create_locked+0x154/0x3b0 [xe] [ 7.719268] [<ffff80000253365c>] __xe_bo_create_locked+0x228/0x304 [xe] [ 7.725951] [<ffff800002533a10>] xe_bo_create_pin_map_at_aligned+0x70/0x1b0 [xe] [ 7.733410] [<ffff800002533c7c>] xe_managed_bo_create_pin_map+0x34/0xcc [xe] [ 7.740522] [<ffff800002533d58>] xe_managed_bo_create_from_data+0x44/0xb0 [xe] [ 7.747807] [<ffff80000258d19c>] xe_uc_fw_init+0x3ec/0x904 [xe] [ 7.753814] [<ffff80000254a478>] xe_guc_init+0x30/0x3dc [xe] [ 7.759553] [<ffff80000258bc04>] xe_uc_init+0x20/0xf0 [xe] [ 7.765121] [<ffff800002542abc>] xe_gt_init_hwconfig+0x5c/0xd0 [xe] [ 7.771461] [<ffff800002537204>] xe_device_probe+0x240/0x588 [xe] [ 7.777627] [<ffff800002575448>] xe_pci_probe+0x6c0/0xa6c [xe] [ 7.783540] [<9000000000e9828c>] local_pci_probe+0x4c/0xb4 [ 7.788989] [<90000000002aa578>] work_for_cpu_fn+0x20/0x40 [ 7.794436] [<90000000002aeb50>] process_one_work+0x1a4/0x458 [ 7.800143] [<90000000002af5a0>] worker_thread+0x304/0x3fc [ 7.805591] [<90000000002bacac>] kthread+0x114/0x138 [ 7.810520] [<9000000000241f64>] ret_from_kernel_thread+0x8/0xa4 [ 7.816489] [ 7.817961] Code: 4c000020 29c3e2f9 53ff93ff <002a0001> 0015002c 03400000 02ff8063 29c04077 001500f7 [ 7.827651] [ 7.829140] ---[ end trace 0000000000000000 ]--- Revise all instances of `SZ_4K' with `PAGE_SIZE' and revise the call to `drm_gem_private_object_init()' in `*___xe_bo_create_locked()' (last call before BUG()) to use `size_t aligned_size' calculated from `PAGE_SIZE' to fix the above error. Cc: <stable@vger.kernel.org> Fixes: 4e03b58 ("drm/xe/uapi: Reject bo creation of unaligned size") Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Tested-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Haien Liang <27873200@qq.com> Tested-by: Shirong Liu <lsr1024@qq.com> Tested-by: Haofeng Wu <s2600cw2@126.com> Link: FanFansfan@22c55ab Co-developed-by: Shang Yatsen <429839446@qq.com> Signed-off-by: Shang Yatsen <429839446@qq.com> Signed-off-by: Mingcong Bai <jeffbai@aosc.io> [Mingcong Bai: Resolved a minor merge conflict post-6.16 in drivers/gpu/drm/xe/xe_bo.c] Link: https://lore.kernel.org/all/20250613-upstream-xe-non-4k-v2-v2-1-934f82249f8a@aosc.io/ Signed-off-by: Mingcong Bai <jeffbai@aosc.io>

…on 3C6000 series steppings Older steppings of the Loongson 3C6000 series incorrectly report the supported link speeds on their PCIe bridges (device IDs 3c19, 3c29) as only 2.5 GT/s, despite the upstream bus supporting speeds from 2.5 GT/s up to 16 GT/s. As a result, certain PCIe devices would be incorrectly probed as a Gen1- only, even if higher link speeds are supported, harming performance and prevents dynamic link speed functionality from being enabled in drivers such as amdgpu. Manually override the `supported_speeds` field for affected PCIe bridges with those found on the upstream bus to correctly reflect the supported link speeds. This patch is found from AOSC OS[1]. Link: #2 #1 Tested-by: Lain Fearyncess Yang <fsf@live.com> Tested-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Ayden Meng <aydenmeng@yeah.net> Signed-off-by: Ayden Meng <aydenmeng@yeah.net> Signed-off-by: Ziyao <liziyao@uniontech.com> Link: https://lore.kernel.org/loongarch/20250822-loongson-pci1-v1-1-39aabbd11fbd@uniontech.com/ Signed-off-by: Mingcong Bai <jeffbai@aosc.io>

…ocation" When this change was introduced between v6.10.4 and v6.10.5, the Broadcom Tigon3 Ethernet interface (tg3) found on Apple MacBook Pro (15'', Mid 2010) would throw many rcu stall errors during boot up, causing peripherals such as the wireless card to misbehave. [ 24.153855] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 2-.... } 21 jiffies s: 973 root: 0x4/. [ 24.166938] rcu: blocking rcu_node structures (internal RCU debug): [ 24.177800] Sending NMI from CPU 3 to CPUs 2: [ 24.183113] NMI backtrace for cpu 2 [ 24.183119] CPU: 2 PID: 1049 Comm: NetworkManager Not tainted 6.10.5-aosc-main #1 [ 24.183123] Hardware name: Apple Inc. MacBookPro6,2/Mac-F22586C8, BIOS MBP61.88Z.005D.B00.1804100943 04/10/18 [ 24.183125] RIP: 0010:__this_module+0x2d3d1/0x4f310 [tg3] [ 24.183135] Code: c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 89 f6 48 03 77 30 8b 06 <31> f6 31 ff c3 cc cc cc cc 66 0f 1f 44 00 00 90 90 90 90 90 90 90 [ 24.183138] RSP: 0018:ffffbf1a011d75e8 EFLAGS: 00000082 [ 24.183141] RAX: 0000000000000000 RBX: ffffa04ec78f8a00 RCX: 0000000000000000 [ 24.183143] RDX: 0000000000000000 RSI: ffffbf1a00fb007c RDI: ffffa04ec78f8a00 [ 24.183145] RBP: 0000000000000b50 R08: 0000000000000000 R09: 0000000000000000 [ 24.183147] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000216 [ 24.183148] R13: ffffbf1a011d7624 R14: ffffa04ec78f8a08 R15: ffffa04ec78f8b40 [ 24.183151] FS: 00007f4c524b2140(0000) GS:ffffa05007d00000(0000) knlGS:0000000000000000 [ 24.183153] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.183155] CR2: 00007f7025eae3e8 CR3: 00000001040f8000 CR4: 00000000000006f0 [ 24.183157] Call Trace: [ 24.183162] <NMI> [ 24.183167] ? nmi_cpu_backtrace+0xbf/0x140 [ 24.183175] ? nmi_cpu_backtrace_handler+0x11/0x20 [ 24.183181] ? nmi_handle+0x61/0x160 [ 24.183186] ? default_do_nmi+0x42/0x110 [ 24.183191] ? exc_nmi+0x1bd/0x290 [ 24.183194] ? end_repeat_nmi+0xf/0x53 [ 24.183203] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183207] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183210] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183213] </NMI> [ 24.183214] <TASK> [ 24.183215] __this_module+0x31828/0x4f310 [tg3] [ 24.183218] ? __this_module+0x2d390/0x4f310 [tg3] [ 24.183221] __this_module+0x398e6/0x4f310 [tg3] [ 24.183225] __this_module+0x3baf8/0x4f310 [tg3] [ 24.183229] __this_module+0x4733f/0x4f310 [tg3] [ 24.183233] ? _raw_spin_unlock_irqrestore+0x25/0x70 [ 24.183237] ? __this_module+0x398e6/0x4f310 [tg3] [ 24.183241] __this_module+0x4b943/0x4f310 [tg3] [ 24.183244] ? delay_tsc+0x89/0xf0 [ 24.183249] ? preempt_count_sub+0x51/0x60 [ 24.183254] __this_module+0x4be4b/0x4f310 [tg3] [ 24.183258] __dev_open+0x103/0x1c0 [ 24.183265] __dev_change_flags+0x1bd/0x230 [ 24.183269] ? rtnl_getlink+0x362/0x400 [ 24.183276] dev_change_flags+0x26/0x70 [ 24.183280] do_setlink+0xe16/0x11f0 [ 24.183286] ? __nla_validate_parse+0x61/0xd40 [ 24.183295] __rtnl_newlink+0x63d/0x9f0 [ 24.183301] ? kmem_cache_alloc_node_noprof+0x12b/0x360 [ 24.183308] ? kmalloc_trace_noprof+0x11e/0x350 [ 24.183312] ? rtnl_newlink+0x2e/0x70 [ 24.183316] rtnl_newlink+0x47/0x70 [ 24.183320] rtnetlink_rcv_msg+0x152/0x400 [ 24.183324] ? __netlink_sendskb+0x68/0x90 [ 24.183329] ? netlink_unicast+0x237/0x290 [ 24.183333] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 24.183336] netlink_rcv_skb+0x5b/0x110 [ 24.183343] netlink_unicast+0x1a4/0x290 [ 24.183347] netlink_sendmsg+0x222/0x4a0 [ 24.183350] ? proc_get_long.constprop.0+0x116/0x210 [ 24.183358] ____sys_sendmsg+0x379/0x3b0 [ 24.183363] ? copy_msghdr_from_user+0x6d/0xb0 [ 24.183368] ___sys_sendmsg+0x86/0xe0 [ 24.183372] ? addrconf_sysctl_forward+0xf3/0x270 [ 24.183378] ? _copy_from_iter+0x8b/0x570 [ 24.183384] ? __pfx_addrconf_sysctl_forward+0x10/0x10 [ 24.183388] ? _raw_spin_unlock+0x19/0x50 [ 24.183392] ? proc_sys_call_handler+0xf3/0x2f0 [ 24.183397] ? trace_hardirqs_on+0x29/0x90 [ 24.183401] ? __fdget+0xc2/0xf0 [ 24.183405] __sys_sendmsg+0x5b/0xc0 [ 24.183410] ? syscall_trace_enter+0x110/0x1b0 [ 24.183416] do_syscall_64+0x64/0x150 [ 24.183423] entry_SYSCALL_64_after_hwframe+0x76/0x7e I have bisected the error to this commit. Reverting it caused no new or perceivable issues on both the MacBook and a Zen4-based laptop. Revert this commit as a workaround. This reverts commit aa162aa. Upstream report: https://bugzilla.kernel.org/show_bug.cgi?id=219390 Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Bug: https://lore.kernel.org/all/b8da4aec-4cca-4eb0-ba87-5f8641aa2ca9@leemhuis.info/ Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>

While testing my ROCm port for LoongArch and AArch64 (patches pending) on the following platforms: - LoongArch ... - Loongson AC612A0_V1.1 (Loongson 3C6000/S) + AMD Radeon RX 6800 - AArch64 ... - FD30M51 (Phytium FT-D3000) + AMD Radeon RX 7600 - Huawei D920S10 (Huawei Kunpeng 920) + AMD Radeon RX 7600 When HSA_AMD_SVM is enabled, amdgpu would fail to initialise at all on LoongArch (no output): amdgpu 0000:0d:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 CPU 0 Unable to handle kernel paging request at virtual address ffffffffff800034, era == 9000000001058044, ra == 9000000001058660 Oops[#1]: CPU: 0 UID: 0 PID: 202 Comm: kworker/0:3 Not tainted 6.16.0+ torvalds#103 PREEMPT(full) Hardware name: To be filled by O.E.M.To be fill To be filled by O.E.M.To be fill/To be filled by O.E.M.To be fill, BIOS Loongson-UDK2018-V4.0. Workqueue: events work_for_cpu_fn pc 9000000001058044 ra 9000000001058660 tp 9000000101500000 sp 9000000101503aa0 a0 ffffffffff800000 a1 0000000ffffe0000 a2 0000000000000000 a3 90000001207c58e0 a4 9000000001a4c310 a5 0000000000000001 a6 0000000000000000 a7 0000000000000001 t0 000003ffff800000 t1 0000000000000001 t2 0000040000000000 t3 03ffff0000002000 t4 0000000000000000 t5 0001010101010101 t6 ffff800000000000 t7 0001000000000000 t8 000000000000002f u0 0000000000800000 s9 9000000002026000 s0 90000001207c58e0 s1 0000000000000001 s2 9000000001935c40 s3 0000001000000000 s4 0000000000000001 s5 0000000ffffe0000 s6 0000000000000040 s7 0001000000000001 s8 0001000000000000 ra: 9000000001058660 memmap_init_zone_device+0x120/0x1b0 ERA: 9000000001058044 __init_zone_device_page.constprop.0+0x4/0x1a0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00020000 [PIS] (IS= ECode=2 EsubCode=0) BADV: ffffffffff800034 PRID: 0014d010 (Loongson-64bit, Loongson-3C6000/S) Modules linked in: amdgpu(+) vfat fat cfg80211 rfkill 8021q garp stp mrp llc snd_hda_codec_atihdmi snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic drm_client_lib drm_ttm_helper syscopyarea ttm sysfillrect sysimgblt fb_sys_fops drm_panel_backlight_quirks video drm_exec drm_suballoc_helper amdxcp mfd_core drm_buddy gpu_sched drm_display_helper drm_kms_helper cec snd_hda_intel ipmi_ssif snd_intel_dspcfg snd_hda_codec snd_hda_core acpi_ipmi snd_hwdep snd_pcm fb loongson3_cpufreq lcd igc snd_timer ipmi_si spi_loongson_pci spi_loongson_core snd ipmi_devintf soundcore ipmi_msghandler binfmt_misc fuse drm drm_panel_orientation_quirks backlight dm_mod dax nfnetlink Process kworker/0:3 (pid: 202, threadinfo=00000000eb7cd5d6, task=000000004ca22b1b) Stack : 0000000000001440 0000000000000000 ffffffffff800000 0000000000000001 90000000020b5978 9000000101503b38 0000000000000001 0000000000000001 0000000000000000 90000000020b5978 90000000020b3f48 0000000000001440 0000000000000000 90000001207c58e0 90000001207c5970 9000000000575e20 90000000010e2e00 90000000020b3f48 900000000205c238 0000000000000000 00000000000001d3 90000001207c58e0 9000000001958f28 9000000120790848 90000001207b3510 0000000000000000 9000000120780000 9000000120780010 90000001207d6000 90000001207c58e0 90000001015660c8 9000000120780000 0000000000000000 90000000005763a8 90000001207c58e0 00000003ff000000 9000000120780000 ffff80000296b820 900000012078f968 90000001207c6000 ... Call Trace: [<9000000001058044>] __init_zone_device_page.constprop.0+0x4/0x1a0 [<900000000105865c>] memmap_init_zone_device+0x11c/0x1b0 [<9000000000575e1c>] memremap_pages+0x24c/0x7b0 [<90000000005763a4>] devm_memremap_pages+0x24/0x80 [<ffff80000296b81c>] kgd2kfd_init_zone_device+0x11c/0x220 [amdgpu] [<ffff80000265d09c>] amdgpu_device_init+0x27dc/0x2bf0 [amdgpu] [<ffff80000265ece8>] amdgpu_driver_load_kms+0x18/0x90 [amdgpu] [<ffff800002651fbc>] amdgpu_pci_probe+0x22c/0x890 [amdgpu] [<9000000000916adc>] local_pci_probe+0x3c/0xb0 [<90000000002976c8>] work_for_cpu_fn+0x18/0x30 [<900000000029aeb4>] process_one_work+0x164/0x320 [<900000000029b96c>] worker_thread+0x37c/0x4a0 [<90000000002a695c>] kthread+0x12c/0x220 [<9000000001055b64>] ret_from_kernel_thread+0x24/0xc0 [<9000000000237524>] ret_from_kernel_thread_asm+0xc/0x88 Code: 00000000 00000000 0280040d <2980d08d> 02bffc0e 2980c08e 02c0208d 29c0208d 1400004f ---[ end trace 0000000000000000 ]--- Or lock up and/or driver reset during computate tasks, such as when running llama.cpp over ROCm, at which point the compute process must be killed before the reset could complete: amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE amdgpu 0000:0a:00.0: amdgpu: failed to remove hardware queue from MES, doorbell=0x1202 amdgpu 0000:0a:00.0: amdgpu: MES might be in unrecoverable state, issue a GPU reset amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 3 amdgpu 0000:0a:00.0: amdgpu: GPU reset begin! amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE amdgpu 0000:0a:00.0: amdgpu: failed to remove hardware queue from MES, doorbell=0x1004 amdgpu 0000:0a:00.0: amdgpu: MES might be in unrecoverable state, issue a GPU reset amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 2 amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 1 amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 0 amdgpu: Failed to quiesce KFD amdgpu 0000:0a:00.0: amdgpu: Dumping IP State amdgpu 0000:0a:00.0: amdgpu: Dumping IP State Completed amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MODE1 reset amdgpu 0000:0a:00.0: amdgpu: GPU mode1 reset amdgpu 0000:0a:00.0: amdgpu: GPU smu mode1 reset amdgpu 0000:0a:00.0: amdgpu: GPU reset succeeded, trying to resume Disabling the aforementioned option makes the issue go away, though it is unclear whether this is a platform-specific issue or one that lies within the amdkfd code. This patch has been tested on all the aforementioned platform combinations, and sent as an RFC to encourage discussion. Signed-off-by: Zhang Yuhao <xinmu@xinmu.moe> Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Mingcong Bai <jeffbai@aosc.io> Link: https://lore.kernel.org/all/20250814032153.227285-1-jeffbai@aosc.io/ Signed-off-by: Mingcong Bai <jeffbai@aosc.io>

The bo/ttm interfaces with kernel memory mapping from dedicated GPU memory. It is not correct to assume that SZ_4K would suffice for page alignment as there are a few hardware platforms that commonly uses non- 4KiB pages - for instance, 16KiB is the most commonly used kernel page size used on Loongson devices (of the LoongArch architecture). Per our testing, Intel Xe/Alchemist/Battlemage families of GPUs works on Loongson platforms so long as "Above 4G Decoding" was enabled and "Resizable BAR" was set to auto in the UEFI firmware settings. Without this fix, the kernel will hang at a kernel BUG(): [ 7.425445] ------------[ cut here ]------------ [ 7.430032] kernel BUG at drivers/gpu/drm/drm_gem.c:181! [ 7.435330] Oops - BUG[#1]: [ 7.438099] CPU: 0 UID: 0 PID: 102 Comm: kworker/0:4 Tainted: G E 6.13.3-aosc-main-00336-g60829239b300-dirty #3 [ 7.449511] Tainted: [E]=UNSIGNED_MODULE [ 7.453402] Hardware name: Loongson Loongson-3A6000-HV-7A2000-1w-V0.1-EVB/Loongson-3A6000-HV-7A2000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V4.0.05756-prestab [ 7.467144] Workqueue: events work_for_cpu_fn [ 7.471472] pc 9000000001045fa4 ra ffff8000025331dc tp 90000001010c8000 sp 90000001010cb960 [ 7.479770] a0 900000012a3e8000 a1 900000010028c000 a2 000000000005d000 a3 0000000000000000 [ 7.488069] a4 0000000000000000 a5 0000000000000000 a6 0000000000000000 a7 0000000000000001 [ 7.496367] t0 0000000000001000 t1 9000000001045000 t2 0000000000000000 t3 0000000000000000 [ 7.504665] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 7.504667] t8 0000000000000000 u0 90000000029ea7d8 s9 900000012a3e9360 s0 900000010028c000 [ 7.504668] s1 ffff800002744000 s2 0000000000000000 s3 0000000000000000 s4 0000000000000001 [ 7.504669] s5 900000012a3e8000 s6 0000000000000001 s7 0000000000022022 s8 0000000000000000 [ 7.537855] ra: ffff8000025331dc ___xe_bo_create_locked+0x158/0x3b0 [xe] [ 7.544893] ERA: 9000000001045fa4 drm_gem_private_object_init+0xcc/0xd0 [ 7.551639] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 7.557785] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 7.562111] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 7.566870] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 7.571628] ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) [ 7.577163] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) [ 7.583128] Modules linked in: xe(E+) drm_gpuvm(E) drm_exec(E) drm_buddy(E) gpu_sched(E) drm_suballoc_helper(E) drm_display_helper(E) loongson(E) r8169(E) cec(E) rc_core(E) realtek(E) i2c_algo_bit(E) tpm_tis_spi(E) led_class(E) hid_generic(E) drm_ttm_helper(E) ttm(E) drm_client_lib(E) drm_kms_helper(E) sunrpc(E) la_ow_syscall(E) i2c_dev(E) [ 7.613049] Process kworker/0:4 (pid: 102, threadinfo=00000000bc26ebd1, task=0000000055480707) [ 7.621606] Stack : 0000000000000000 3030303a6963702b 000000000005d000 0000000000000000 [ 7.629563] 0000000000000001 0000000000000000 0000000000000000 8e1bfae42b2f7877 [ 7.637519] 000000000005d000 900000012a3e8000 900000012a3e9360 0000000000000000 [ 7.645475] ffffffffffffffff 0000000000000000 0000000000022022 0000000000000000 [ 7.653431] 0000000000000001 ffff800002533660 0000000000022022 9000000000234470 [ 7.661386] 90000001010cba28 0000000000001000 0000000000000000 000000000005c300 [ 7.669342] 900000012a3e8000 0000000000000000 0000000000000001 900000012a3e8000 [ 7.677298] ffffffffffffffff 0000000000022022 900000012a3e9498 ffff800002533a14 [ 7.685254] 0000000000022022 0000000000000000 900000000209c000 90000000010589e0 [ 7.693209] 90000001010cbab8 ffff8000027c78c0 fffffffffffff000 900000012a3e8000 [ 7.701165] ... [ 7.703588] Call Trace: [ 7.703590] [<9000000001045fa4>] drm_gem_private_object_init+0xcc/0xd0 [ 7.712496] [<ffff8000025331d8>] ___xe_bo_create_locked+0x154/0x3b0 [xe] [ 7.719268] [<ffff80000253365c>] __xe_bo_create_locked+0x228/0x304 [xe] [ 7.725951] [<ffff800002533a10>] xe_bo_create_pin_map_at_aligned+0x70/0x1b0 [xe] [ 7.733410] [<ffff800002533c7c>] xe_managed_bo_create_pin_map+0x34/0xcc [xe] [ 7.740522] [<ffff800002533d58>] xe_managed_bo_create_from_data+0x44/0xb0 [xe] [ 7.747807] [<ffff80000258d19c>] xe_uc_fw_init+0x3ec/0x904 [xe] [ 7.753814] [<ffff80000254a478>] xe_guc_init+0x30/0x3dc [xe] [ 7.759553] [<ffff80000258bc04>] xe_uc_init+0x20/0xf0 [xe] [ 7.765121] [<ffff800002542abc>] xe_gt_init_hwconfig+0x5c/0xd0 [xe] [ 7.771461] [<ffff800002537204>] xe_device_probe+0x240/0x588 [xe] [ 7.777627] [<ffff800002575448>] xe_pci_probe+0x6c0/0xa6c [xe] [ 7.783540] [<9000000000e9828c>] local_pci_probe+0x4c/0xb4 [ 7.788989] [<90000000002aa578>] work_for_cpu_fn+0x20/0x40 [ 7.794436] [<90000000002aeb50>] process_one_work+0x1a4/0x458 [ 7.800143] [<90000000002af5a0>] worker_thread+0x304/0x3fc [ 7.805591] [<90000000002bacac>] kthread+0x114/0x138 [ 7.810520] [<9000000000241f64>] ret_from_kernel_thread+0x8/0xa4 [ 7.816489] [ 7.817961] Code: 4c000020 29c3e2f9 53ff93ff <002a0001> 0015002c 03400000 02ff8063 29c04077 001500f7 [ 7.827651] [ 7.829140] ---[ end trace 0000000000000000 ]--- Revise all instances of `SZ_4K' with `PAGE_SIZE' and revise the call to `drm_gem_private_object_init()' in `*___xe_bo_create_locked()' (last call before BUG()) to use `size_t aligned_size' calculated from `PAGE_SIZE' to fix the above error. Cc: stable@vger.kernel.org Fixes: 4e03b58 ("drm/xe/uapi: Reject bo creation of unaligned size") Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Tested-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Wenbin Fang <fangwenbin@vip.qq.com> Tested-by: Haien Liang <27873200@qq.com> Tested-by: Jianfeng Liu <liujianfeng1994@gmail.com> Tested-by: Shirong Liu <lsr1024@qq.com> Tested-by: Haofeng Wu <s2600cw2@126.com> Link: FanFansfan@22c55ab Link: https://t.me/c/1109254909/768552 Co-developed-by: Shang Yatsen <429839446@qq.com> Signed-off-by: Shang Yatsen <429839446@qq.com> Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Link: https://lore.kernel.org/all/20250613-upstream-xe-non-4k-v2-v2-1-934f82249f8a@aosc.io/ Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>

…ocation" When this change was introduced between v6.10.4 and v6.10.5, the Broadcom Tigon3 Ethernet interface (tg3) found on Apple MacBook Pro (15'', Mid 2010) would throw many rcu stall errors during boot up, causing peripherals such as the wireless card to misbehave. [ 24.153855] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 2-.... } 21 jiffies s: 973 root: 0x4/. [ 24.166938] rcu: blocking rcu_node structures (internal RCU debug): [ 24.177800] Sending NMI from CPU 3 to CPUs 2: [ 24.183113] NMI backtrace for cpu 2 [ 24.183119] CPU: 2 PID: 1049 Comm: NetworkManager Not tainted 6.10.5-aosc-main #1 [ 24.183123] Hardware name: Apple Inc. MacBookPro6,2/Mac-F22586C8, BIOS MBP61.88Z.005D.B00.1804100943 04/10/18 [ 24.183125] RIP: 0010:__this_module+0x2d3d1/0x4f310 [tg3] [ 24.183135] Code: c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 89 f6 48 03 77 30 8b 06 <31> f6 31 ff c3 cc cc cc cc 66 0f 1f 44 00 00 90 90 90 90 90 90 90 [ 24.183138] RSP: 0018:ffffbf1a011d75e8 EFLAGS: 00000082 [ 24.183141] RAX: 0000000000000000 RBX: ffffa04ec78f8a00 RCX: 0000000000000000 [ 24.183143] RDX: 0000000000000000 RSI: ffffbf1a00fb007c RDI: ffffa04ec78f8a00 [ 24.183145] RBP: 0000000000000b50 R08: 0000000000000000 R09: 0000000000000000 [ 24.183147] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000216 [ 24.183148] R13: ffffbf1a011d7624 R14: ffffa04ec78f8a08 R15: ffffa04ec78f8b40 [ 24.183151] FS: 00007f4c524b2140(0000) GS:ffffa05007d00000(0000) knlGS:0000000000000000 [ 24.183153] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.183155] CR2: 00007f7025eae3e8 CR3: 00000001040f8000 CR4: 00000000000006f0 [ 24.183157] Call Trace: [ 24.183162] <NMI> [ 24.183167] ? nmi_cpu_backtrace+0xbf/0x140 [ 24.183175] ? nmi_cpu_backtrace_handler+0x11/0x20 [ 24.183181] ? nmi_handle+0x61/0x160 [ 24.183186] ? default_do_nmi+0x42/0x110 [ 24.183191] ? exc_nmi+0x1bd/0x290 [ 24.183194] ? end_repeat_nmi+0xf/0x53 [ 24.183203] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183207] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183210] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183213] </NMI> [ 24.183214] <TASK> [ 24.183215] __this_module+0x31828/0x4f310 [tg3] [ 24.183218] ? __this_module+0x2d390/0x4f310 [tg3] [ 24.183221] __this_module+0x398e6/0x4f310 [tg3] [ 24.183225] __this_module+0x3baf8/0x4f310 [tg3] [ 24.183229] __this_module+0x4733f/0x4f310 [tg3] [ 24.183233] ? _raw_spin_unlock_irqrestore+0x25/0x70 [ 24.183237] ? __this_module+0x398e6/0x4f310 [tg3] [ 24.183241] __this_module+0x4b943/0x4f310 [tg3] [ 24.183244] ? delay_tsc+0x89/0xf0 [ 24.183249] ? preempt_count_sub+0x51/0x60 [ 24.183254] __this_module+0x4be4b/0x4f310 [tg3] [ 24.183258] __dev_open+0x103/0x1c0 [ 24.183265] __dev_change_flags+0x1bd/0x230 [ 24.183269] ? rtnl_getlink+0x362/0x400 [ 24.183276] dev_change_flags+0x26/0x70 [ 24.183280] do_setlink+0xe16/0x11f0 [ 24.183286] ? __nla_validate_parse+0x61/0xd40 [ 24.183295] __rtnl_newlink+0x63d/0x9f0 [ 24.183301] ? kmem_cache_alloc_node_noprof+0x12b/0x360 [ 24.183308] ? kmalloc_trace_noprof+0x11e/0x350 [ 24.183312] ? rtnl_newlink+0x2e/0x70 [ 24.183316] rtnl_newlink+0x47/0x70 [ 24.183320] rtnetlink_rcv_msg+0x152/0x400 [ 24.183324] ? __netlink_sendskb+0x68/0x90 [ 24.183329] ? netlink_unicast+0x237/0x290 [ 24.183333] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 24.183336] netlink_rcv_skb+0x5b/0x110 [ 24.183343] netlink_unicast+0x1a4/0x290 [ 24.183347] netlink_sendmsg+0x222/0x4a0 [ 24.183350] ? proc_get_long.constprop.0+0x116/0x210 [ 24.183358] ____sys_sendmsg+0x379/0x3b0 [ 24.183363] ? copy_msghdr_from_user+0x6d/0xb0 [ 24.183368] ___sys_sendmsg+0x86/0xe0 [ 24.183372] ? addrconf_sysctl_forward+0xf3/0x270 [ 24.183378] ? _copy_from_iter+0x8b/0x570 [ 24.183384] ? __pfx_addrconf_sysctl_forward+0x10/0x10 [ 24.183388] ? _raw_spin_unlock+0x19/0x50 [ 24.183392] ? proc_sys_call_handler+0xf3/0x2f0 [ 24.183397] ? trace_hardirqs_on+0x29/0x90 [ 24.183401] ? __fdget+0xc2/0xf0 [ 24.183405] __sys_sendmsg+0x5b/0xc0 [ 24.183410] ? syscall_trace_enter+0x110/0x1b0 [ 24.183416] do_syscall_64+0x64/0x150 [ 24.183423] entry_SYSCALL_64_after_hwframe+0x76/0x7e I have bisected the error to this commit. Reverting it caused no new or perceivable issues on both the MacBook and a Zen4-based laptop. Revert this commit as a workaround. This reverts commit aa162aa. Upstream report: https://bugzilla.kernel.org/show_bug.cgi?id=219390 Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Bug: https://lore.kernel.org/all/b8da4aec-4cca-4eb0-ba87-5f8641aa2ca9@leemhuis.info/ Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>

While testing my ROCm port for LoongArch and AArch64 (patches pending) on the following platforms: - LoongArch ... - Loongson AC612A0_V1.1 (Loongson 3C6000/S) + AMD Radeon RX 6800 - AArch64 ... - FD30M51 (Phytium FT-D3000) + AMD Radeon RX 7600 - Huawei D920S10 (Huawei Kunpeng 920) + AMD Radeon RX 7600 When HSA_AMD_SVM is enabled, amdgpu would fail to initialise at all on LoongArch (no output): amdgpu 0000:0d:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 CPU 0 Unable to handle kernel paging request at virtual address ffffffffff800034, era == 9000000001058044, ra == 9000000001058660 Oops[#1]: CPU: 0 UID: 0 PID: 202 Comm: kworker/0:3 Not tainted 6.16.0+ torvalds#103 PREEMPT(full) Hardware name: To be filled by O.E.M.To be fill To be filled by O.E.M.To be fill/To be filled by O.E.M.To be fill, BIOS Loongson-UDK2018-V4.0. Workqueue: events work_for_cpu_fn pc 9000000001058044 ra 9000000001058660 tp 9000000101500000 sp 9000000101503aa0 a0 ffffffffff800000 a1 0000000ffffe0000 a2 0000000000000000 a3 90000001207c58e0 a4 9000000001a4c310 a5 0000000000000001 a6 0000000000000000 a7 0000000000000001 t0 000003ffff800000 t1 0000000000000001 t2 0000040000000000 t3 03ffff0000002000 t4 0000000000000000 t5 0001010101010101 t6 ffff800000000000 t7 0001000000000000 t8 000000000000002f u0 0000000000800000 s9 9000000002026000 s0 90000001207c58e0 s1 0000000000000001 s2 9000000001935c40 s3 0000001000000000 s4 0000000000000001 s5 0000000ffffe0000 s6 0000000000000040 s7 0001000000000001 s8 0001000000000000 ra: 9000000001058660 memmap_init_zone_device+0x120/0x1b0 ERA: 9000000001058044 __init_zone_device_page.constprop.0+0x4/0x1a0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00020000 [PIS] (IS= ECode=2 EsubCode=0) BADV: ffffffffff800034 PRID: 0014d010 (Loongson-64bit, Loongson-3C6000/S) Modules linked in: amdgpu(+) vfat fat cfg80211 rfkill 8021q garp stp mrp llc snd_hda_codec_atihdmi snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic drm_client_lib drm_ttm_helper syscopyarea ttm sysfillrect sysimgblt fb_sys_fops drm_panel_backlight_quirks video drm_exec drm_suballoc_helper amdxcp mfd_core drm_buddy gpu_sched drm_display_helper drm_kms_helper cec snd_hda_intel ipmi_ssif snd_intel_dspcfg snd_hda_codec snd_hda_core acpi_ipmi snd_hwdep snd_pcm fb loongson3_cpufreq lcd igc snd_timer ipmi_si spi_loongson_pci spi_loongson_core snd ipmi_devintf soundcore ipmi_msghandler binfmt_misc fuse drm drm_panel_orientation_quirks backlight dm_mod dax nfnetlink Process kworker/0:3 (pid: 202, threadinfo=00000000eb7cd5d6, task=000000004ca22b1b) Stack : 0000000000001440 0000000000000000 ffffffffff800000 0000000000000001 90000000020b5978 9000000101503b38 0000000000000001 0000000000000001 0000000000000000 90000000020b5978 90000000020b3f48 0000000000001440 0000000000000000 90000001207c58e0 90000001207c5970 9000000000575e20 90000000010e2e00 90000000020b3f48 900000000205c238 0000000000000000 00000000000001d3 90000001207c58e0 9000000001958f28 9000000120790848 90000001207b3510 0000000000000000 9000000120780000 9000000120780010 90000001207d6000 90000001207c58e0 90000001015660c8 9000000120780000 0000000000000000 90000000005763a8 90000001207c58e0 00000003ff000000 9000000120780000 ffff80000296b820 900000012078f968 90000001207c6000 ... Call Trace: [<9000000001058044>] __init_zone_device_page.constprop.0+0x4/0x1a0 [<900000000105865c>] memmap_init_zone_device+0x11c/0x1b0 [<9000000000575e1c>] memremap_pages+0x24c/0x7b0 [<90000000005763a4>] devm_memremap_pages+0x24/0x80 [<ffff80000296b81c>] kgd2kfd_init_zone_device+0x11c/0x220 [amdgpu] [<ffff80000265d09c>] amdgpu_device_init+0x27dc/0x2bf0 [amdgpu] [<ffff80000265ece8>] amdgpu_driver_load_kms+0x18/0x90 [amdgpu] [<ffff800002651fbc>] amdgpu_pci_probe+0x22c/0x890 [amdgpu] [<9000000000916adc>] local_pci_probe+0x3c/0xb0 [<90000000002976c8>] work_for_cpu_fn+0x18/0x30 [<900000000029aeb4>] process_one_work+0x164/0x320 [<900000000029b96c>] worker_thread+0x37c/0x4a0 [<90000000002a695c>] kthread+0x12c/0x220 [<9000000001055b64>] ret_from_kernel_thread+0x24/0xc0 [<9000000000237524>] ret_from_kernel_thread_asm+0xc/0x88 Code: 00000000 00000000 0280040d <2980d08d> 02bffc0e 2980c08e 02c0208d 29c0208d 1400004f ---[ end trace 0000000000000000 ]--- Or lock up and/or driver reset during computate tasks, such as when running llama.cpp over ROCm, at which point the compute process must be killed before the reset could complete: amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE amdgpu 0000:0a:00.0: amdgpu: failed to remove hardware queue from MES, doorbell=0x1202 amdgpu 0000:0a:00.0: amdgpu: MES might be in unrecoverable state, issue a GPU reset amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 3 amdgpu 0000:0a:00.0: amdgpu: GPU reset begin! amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE amdgpu 0000:0a:00.0: amdgpu: failed to remove hardware queue from MES, doorbell=0x1004 amdgpu 0000:0a:00.0: amdgpu: MES might be in unrecoverable state, issue a GPU reset amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 2 amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 1 amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 0 amdgpu: Failed to quiesce KFD amdgpu 0000:0a:00.0: amdgpu: Dumping IP State amdgpu 0000:0a:00.0: amdgpu: Dumping IP State Completed amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MODE1 reset amdgpu 0000:0a:00.0: amdgpu: GPU mode1 reset amdgpu 0000:0a:00.0: amdgpu: GPU smu mode1 reset amdgpu 0000:0a:00.0: amdgpu: GPU reset succeeded, trying to resume Disabling the aforementioned option makes the issue go away, though it is unclear whether this is a platform-specific issue or one that lies within the amdkfd code. This patch has been tested on all the aforementioned platform combinations, and sent as an RFC to encourage discussion. Signed-off-by: Zhang Yuhao <xinmu@xinmu.moe> Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Mingcong Bai <jeffbai@aosc.io> Link: https://lore.kernel.org/all/20250814032153.227285-1-jeffbai@aosc.io/ Signed-off-by: Mingcong Bai <jeffbai@aosc.io>

syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in: Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot+1741b56d54536f4ec349@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68a6767c.050a0220.3d78fd.0011.GAE@google.com/ Tested-by: syzbot+1741b56d54536f4ec349@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250821021901.2814721-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If preparing a write bio fails then blk_zone_wplug_bio_work() calls bio_endio() with zwplug->lock held. If a device mapper driver is stacked on top of the zoned block device then this results in nested locking of zwplug->lock. The resulting lockdep complaint is a false positive because this is nested locking and not recursive locking. Suppress this false positive by calling blk_zone_wplug_bio_io_error() without holding zwplug->lock. This is safe because no code in blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This patch suppresses the following lockdep complaint: WARNING: possible recursive locking detected -------------------------------------------- kworker/3:0H/46 is trying to acquire lock: ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0 but task is already holding lock: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&zwplug->lock); lock(&zwplug->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/3:0H/46: #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c stack backtrace: CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: sdd_zwplugs blk_zone_wplug_bio_work Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_deadlock_bug+0x38c/0x398 __lock_acquire+0x13e8/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 blk_zone_write_plug_bio_endio+0x64/0x1f0 bio_endio+0x9c/0x240 __dm_io_complete+0x214/0x260 clone_endio+0xe8/0x214 bio_endio+0x218/0x240 blk_zone_wplug_bio_work+0x204/0x48c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: stable@vger.kernel.org Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Fixes: dd291d7 ("block: Introduce zone write plugging") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250825182720.1697203-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>

into HEAD KVM/riscv fixes for 6.17, take #1 - Fix pte settings within kvm_riscv_gstage_ioremap() - Fix comments in kvm_riscv_check_vcpu_requests() - Fix stack overrun when setting vlenb via ONE_REG

The bo/ttm interfaces with kernel memory mapping from dedicated GPU memory. It is not correct to assume that SZ_4K would suffice for page alignment as there are a few hardware platforms that commonly uses non- 4KiB pages - for instance, 16KiB is the most commonly used kernel page size used on Loongson devices (of the LoongArch architecture). Per our testing, Intel Xe/Alchemist/Battlemage families of GPUs works on Loongson platforms so long as "Above 4G Decoding" was enabled and "Resizable BAR" was set to auto in the UEFI firmware settings. Without this fix, the kernel will hang at a kernel BUG(): [ 7.425445] ------------[ cut here ]------------ [ 7.430032] kernel BUG at drivers/gpu/drm/drm_gem.c:181! [ 7.435330] Oops - BUG[#1]: [ 7.438099] CPU: 0 UID: 0 PID: 102 Comm: kworker/0:4 Tainted: G E 6.13.3-aosc-main-00336-g60829239b300-dirty #3 [ 7.449511] Tainted: [E]=UNSIGNED_MODULE [ 7.453402] Hardware name: Loongson Loongson-3A6000-HV-7A2000-1w-V0.1-EVB/Loongson-3A6000-HV-7A2000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V4.0.05756-prestab [ 7.467144] Workqueue: events work_for_cpu_fn [ 7.471472] pc 9000000001045fa4 ra ffff8000025331dc tp 90000001010c8000 sp 90000001010cb960 [ 7.479770] a0 900000012a3e8000 a1 900000010028c000 a2 000000000005d000 a3 0000000000000000 [ 7.488069] a4 0000000000000000 a5 0000000000000000 a6 0000000000000000 a7 0000000000000001 [ 7.496367] t0 0000000000001000 t1 9000000001045000 t2 0000000000000000 t3 0000000000000000 [ 7.504665] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 7.504667] t8 0000000000000000 u0 90000000029ea7d8 s9 900000012a3e9360 s0 900000010028c000 [ 7.504668] s1 ffff800002744000 s2 0000000000000000 s3 0000000000000000 s4 0000000000000001 [ 7.504669] s5 900000012a3e8000 s6 0000000000000001 s7 0000000000022022 s8 0000000000000000 [ 7.537855] ra: ffff8000025331dc ___xe_bo_create_locked+0x158/0x3b0 [xe] [ 7.544893] ERA: 9000000001045fa4 drm_gem_private_object_init+0xcc/0xd0 [ 7.551639] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 7.557785] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 7.562111] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 7.566870] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 7.571628] ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) [ 7.577163] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) [ 7.583128] Modules linked in: xe(E+) drm_gpuvm(E) drm_exec(E) drm_buddy(E) gpu_sched(E) drm_suballoc_helper(E) drm_display_helper(E) loongson(E) r8169(E) cec(E) rc_core(E) realtek(E) i2c_algo_bit(E) tpm_tis_spi(E) led_class(E) hid_generic(E) drm_ttm_helper(E) ttm(E) drm_client_lib(E) drm_kms_helper(E) sunrpc(E) la_ow_syscall(E) i2c_dev(E) [ 7.613049] Process kworker/0:4 (pid: 102, threadinfo=00000000bc26ebd1, task=0000000055480707) [ 7.621606] Stack : 0000000000000000 3030303a6963702b 000000000005d000 0000000000000000 [ 7.629563] 0000000000000001 0000000000000000 0000000000000000 8e1bfae42b2f7877 [ 7.637519] 000000000005d000 900000012a3e8000 900000012a3e9360 0000000000000000 [ 7.645475] ffffffffffffffff 0000000000000000 0000000000022022 0000000000000000 [ 7.653431] 0000000000000001 ffff800002533660 0000000000022022 9000000000234470 [ 7.661386] 90000001010cba28 0000000000001000 0000000000000000 000000000005c300 [ 7.669342] 900000012a3e8000 0000000000000000 0000000000000001 900000012a3e8000 [ 7.677298] ffffffffffffffff 0000000000022022 900000012a3e9498 ffff800002533a14 [ 7.685254] 0000000000022022 0000000000000000 900000000209c000 90000000010589e0 [ 7.693209] 90000001010cbab8 ffff8000027c78c0 fffffffffffff000 900000012a3e8000 [ 7.701165] ... [ 7.703588] Call Trace: [ 7.703590] [<9000000001045fa4>] drm_gem_private_object_init+0xcc/0xd0 [ 7.712496] [<ffff8000025331d8>] ___xe_bo_create_locked+0x154/0x3b0 [xe] [ 7.719268] [<ffff80000253365c>] __xe_bo_create_locked+0x228/0x304 [xe] [ 7.725951] [<ffff800002533a10>] xe_bo_create_pin_map_at_aligned+0x70/0x1b0 [xe] [ 7.733410] [<ffff800002533c7c>] xe_managed_bo_create_pin_map+0x34/0xcc [xe] [ 7.740522] [<ffff800002533d58>] xe_managed_bo_create_from_data+0x44/0xb0 [xe] [ 7.747807] [<ffff80000258d19c>] xe_uc_fw_init+0x3ec/0x904 [xe] [ 7.753814] [<ffff80000254a478>] xe_guc_init+0x30/0x3dc [xe] [ 7.759553] [<ffff80000258bc04>] xe_uc_init+0x20/0xf0 [xe] [ 7.765121] [<ffff800002542abc>] xe_gt_init_hwconfig+0x5c/0xd0 [xe] [ 7.771461] [<ffff800002537204>] xe_device_probe+0x240/0x588 [xe] [ 7.777627] [<ffff800002575448>] xe_pci_probe+0x6c0/0xa6c [xe] [ 7.783540] [<9000000000e9828c>] local_pci_probe+0x4c/0xb4 [ 7.788989] [<90000000002aa578>] work_for_cpu_fn+0x20/0x40 [ 7.794436] [<90000000002aeb50>] process_one_work+0x1a4/0x458 [ 7.800143] [<90000000002af5a0>] worker_thread+0x304/0x3fc [ 7.805591] [<90000000002bacac>] kthread+0x114/0x138 [ 7.810520] [<9000000000241f64>] ret_from_kernel_thread+0x8/0xa4 [ 7.816489] [ 7.817961] Code: 4c000020 29c3e2f9 53ff93ff <002a0001> 0015002c 03400000 02ff8063 29c04077 001500f7 [ 7.827651] [ 7.829140] ---[ end trace 0000000000000000 ]--- Revise all instances of `SZ_4K' with `PAGE_SIZE' and revise the call to `drm_gem_private_object_init()' in `*___xe_bo_create_locked()' (last call before BUG()) to use `size_t aligned_size' calculated from `PAGE_SIZE' to fix the above error. Cc: stable@vger.kernel.org Fixes: 4e03b58 ("drm/xe/uapi: Reject bo creation of unaligned size") Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Tested-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Wenbin Fang <fangwenbin@vip.qq.com> Tested-by: Haien Liang <27873200@qq.com> Tested-by: Jianfeng Liu <liujianfeng1994@gmail.com> Tested-by: Shirong Liu <lsr1024@qq.com> Tested-by: Haofeng Wu <s2600cw2@126.com> Link: FanFansfan@22c55ab Link: https://t.me/c/1109254909/768552 Co-developed-by: Shang Yatsen <429839446@qq.com> Signed-off-by: Shang Yatsen <429839446@qq.com> Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Link: https://lore.kernel.org/all/20250613-upstream-xe-non-4k-v2-v2-1-934f82249f8a@aosc.io/ Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>

…ocation" When this change was introduced between v6.10.4 and v6.10.5, the Broadcom Tigon3 Ethernet interface (tg3) found on Apple MacBook Pro (15'', Mid 2010) would throw many rcu stall errors during boot up, causing peripherals such as the wireless card to misbehave. [ 24.153855] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 2-.... } 21 jiffies s: 973 root: 0x4/. [ 24.166938] rcu: blocking rcu_node structures (internal RCU debug): [ 24.177800] Sending NMI from CPU 3 to CPUs 2: [ 24.183113] NMI backtrace for cpu 2 [ 24.183119] CPU: 2 PID: 1049 Comm: NetworkManager Not tainted 6.10.5-aosc-main #1 [ 24.183123] Hardware name: Apple Inc. MacBookPro6,2/Mac-F22586C8, BIOS MBP61.88Z.005D.B00.1804100943 04/10/18 [ 24.183125] RIP: 0010:__this_module+0x2d3d1/0x4f310 [tg3] [ 24.183135] Code: c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 89 f6 48 03 77 30 8b 06 <31> f6 31 ff c3 cc cc cc cc 66 0f 1f 44 00 00 90 90 90 90 90 90 90 [ 24.183138] RSP: 0018:ffffbf1a011d75e8 EFLAGS: 00000082 [ 24.183141] RAX: 0000000000000000 RBX: ffffa04ec78f8a00 RCX: 0000000000000000 [ 24.183143] RDX: 0000000000000000 RSI: ffffbf1a00fb007c RDI: ffffa04ec78f8a00 [ 24.183145] RBP: 0000000000000b50 R08: 0000000000000000 R09: 0000000000000000 [ 24.183147] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000216 [ 24.183148] R13: ffffbf1a011d7624 R14: ffffa04ec78f8a08 R15: ffffa04ec78f8b40 [ 24.183151] FS: 00007f4c524b2140(0000) GS:ffffa05007d00000(0000) knlGS:0000000000000000 [ 24.183153] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.183155] CR2: 00007f7025eae3e8 CR3: 00000001040f8000 CR4: 00000000000006f0 [ 24.183157] Call Trace: [ 24.183162] <NMI> [ 24.183167] ? nmi_cpu_backtrace+0xbf/0x140 [ 24.183175] ? nmi_cpu_backtrace_handler+0x11/0x20 [ 24.183181] ? nmi_handle+0x61/0x160 [ 24.183186] ? default_do_nmi+0x42/0x110 [ 24.183191] ? exc_nmi+0x1bd/0x290 [ 24.183194] ? end_repeat_nmi+0xf/0x53 [ 24.183203] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183207] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183210] ? __this_module+0x2d3d1/0x4f310 [tg3] [ 24.183213] </NMI> [ 24.183214] <TASK> [ 24.183215] __this_module+0x31828/0x4f310 [tg3] [ 24.183218] ? __this_module+0x2d390/0x4f310 [tg3] [ 24.183221] __this_module+0x398e6/0x4f310 [tg3] [ 24.183225] __this_module+0x3baf8/0x4f310 [tg3] [ 24.183229] __this_module+0x4733f/0x4f310 [tg3] [ 24.183233] ? _raw_spin_unlock_irqrestore+0x25/0x70 [ 24.183237] ? __this_module+0x398e6/0x4f310 [tg3] [ 24.183241] __this_module+0x4b943/0x4f310 [tg3] [ 24.183244] ? delay_tsc+0x89/0xf0 [ 24.183249] ? preempt_count_sub+0x51/0x60 [ 24.183254] __this_module+0x4be4b/0x4f310 [tg3] [ 24.183258] __dev_open+0x103/0x1c0 [ 24.183265] __dev_change_flags+0x1bd/0x230 [ 24.183269] ? rtnl_getlink+0x362/0x400 [ 24.183276] dev_change_flags+0x26/0x70 [ 24.183280] do_setlink+0xe16/0x11f0 [ 24.183286] ? __nla_validate_parse+0x61/0xd40 [ 24.183295] __rtnl_newlink+0x63d/0x9f0 [ 24.183301] ? kmem_cache_alloc_node_noprof+0x12b/0x360 [ 24.183308] ? kmalloc_trace_noprof+0x11e/0x350 [ 24.183312] ? rtnl_newlink+0x2e/0x70 [ 24.183316] rtnl_newlink+0x47/0x70 [ 24.183320] rtnetlink_rcv_msg+0x152/0x400 [ 24.183324] ? __netlink_sendskb+0x68/0x90 [ 24.183329] ? netlink_unicast+0x237/0x290 [ 24.183333] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 24.183336] netlink_rcv_skb+0x5b/0x110 [ 24.183343] netlink_unicast+0x1a4/0x290 [ 24.183347] netlink_sendmsg+0x222/0x4a0 [ 24.183350] ? proc_get_long.constprop.0+0x116/0x210 [ 24.183358] ____sys_sendmsg+0x379/0x3b0 [ 24.183363] ? copy_msghdr_from_user+0x6d/0xb0 [ 24.183368] ___sys_sendmsg+0x86/0xe0 [ 24.183372] ? addrconf_sysctl_forward+0xf3/0x270 [ 24.183378] ? _copy_from_iter+0x8b/0x570 [ 24.183384] ? __pfx_addrconf_sysctl_forward+0x10/0x10 [ 24.183388] ? _raw_spin_unlock+0x19/0x50 [ 24.183392] ? proc_sys_call_handler+0xf3/0x2f0 [ 24.183397] ? trace_hardirqs_on+0x29/0x90 [ 24.183401] ? __fdget+0xc2/0xf0 [ 24.183405] __sys_sendmsg+0x5b/0xc0 [ 24.183410] ? syscall_trace_enter+0x110/0x1b0 [ 24.183416] do_syscall_64+0x64/0x150 [ 24.183423] entry_SYSCALL_64_after_hwframe+0x76/0x7e I have bisected the error to this commit. Reverting it caused no new or perceivable issues on both the MacBook and a Zen4-based laptop. Revert this commit as a workaround. This reverts commit aa162aa. Upstream report: https://bugzilla.kernel.org/show_bug.cgi?id=219390 Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Bug: https://lore.kernel.org/all/b8da4aec-4cca-4eb0-ba87-5f8641aa2ca9@leemhuis.info/ Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>

While testing my ROCm port for LoongArch and AArch64 (patches pending) on the following platforms: - LoongArch ... - Loongson AC612A0_V1.1 (Loongson 3C6000/S) + AMD Radeon RX 6800 - AArch64 ... - FD30M51 (Phytium FT-D3000) + AMD Radeon RX 7600 - Huawei D920S10 (Huawei Kunpeng 920) + AMD Radeon RX 7600 When HSA_AMD_SVM is enabled, amdgpu would fail to initialise at all on LoongArch (no output): amdgpu 0000:0d:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 CPU 0 Unable to handle kernel paging request at virtual address ffffffffff800034, era == 9000000001058044, ra == 9000000001058660 Oops[#1]: CPU: 0 UID: 0 PID: 202 Comm: kworker/0:3 Not tainted 6.16.0+ torvalds#103 PREEMPT(full) Hardware name: To be filled by O.E.M.To be fill To be filled by O.E.M.To be fill/To be filled by O.E.M.To be fill, BIOS Loongson-UDK2018-V4.0. Workqueue: events work_for_cpu_fn pc 9000000001058044 ra 9000000001058660 tp 9000000101500000 sp 9000000101503aa0 a0 ffffffffff800000 a1 0000000ffffe0000 a2 0000000000000000 a3 90000001207c58e0 a4 9000000001a4c310 a5 0000000000000001 a6 0000000000000000 a7 0000000000000001 t0 000003ffff800000 t1 0000000000000001 t2 0000040000000000 t3 03ffff0000002000 t4 0000000000000000 t5 0001010101010101 t6 ffff800000000000 t7 0001000000000000 t8 000000000000002f u0 0000000000800000 s9 9000000002026000 s0 90000001207c58e0 s1 0000000000000001 s2 9000000001935c40 s3 0000001000000000 s4 0000000000000001 s5 0000000ffffe0000 s6 0000000000000040 s7 0001000000000001 s8 0001000000000000 ra: 9000000001058660 memmap_init_zone_device+0x120/0x1b0 ERA: 9000000001058044 __init_zone_device_page.constprop.0+0x4/0x1a0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00020000 [PIS] (IS= ECode=2 EsubCode=0) BADV: ffffffffff800034 PRID: 0014d010 (Loongson-64bit, Loongson-3C6000/S) Modules linked in: amdgpu(+) vfat fat cfg80211 rfkill 8021q garp stp mrp llc snd_hda_codec_atihdmi snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic drm_client_lib drm_ttm_helper syscopyarea ttm sysfillrect sysimgblt fb_sys_fops drm_panel_backlight_quirks video drm_exec drm_suballoc_helper amdxcp mfd_core drm_buddy gpu_sched drm_display_helper drm_kms_helper cec snd_hda_intel ipmi_ssif snd_intel_dspcfg snd_hda_codec snd_hda_core acpi_ipmi snd_hwdep snd_pcm fb loongson3_cpufreq lcd igc snd_timer ipmi_si spi_loongson_pci spi_loongson_core snd ipmi_devintf soundcore ipmi_msghandler binfmt_misc fuse drm drm_panel_orientation_quirks backlight dm_mod dax nfnetlink Process kworker/0:3 (pid: 202, threadinfo=00000000eb7cd5d6, task=000000004ca22b1b) Stack : 0000000000001440 0000000000000000 ffffffffff800000 0000000000000001 90000000020b5978 9000000101503b38 0000000000000001 0000000000000001 0000000000000000 90000000020b5978 90000000020b3f48 0000000000001440 0000000000000000 90000001207c58e0 90000001207c5970 9000000000575e20 90000000010e2e00 90000000020b3f48 900000000205c238 0000000000000000 00000000000001d3 90000001207c58e0 9000000001958f28 9000000120790848 90000001207b3510 0000000000000000 9000000120780000 9000000120780010 90000001207d6000 90000001207c58e0 90000001015660c8 9000000120780000 0000000000000000 90000000005763a8 90000001207c58e0 00000003ff000000 9000000120780000 ffff80000296b820 900000012078f968 90000001207c6000 ... Call Trace: [<9000000001058044>] __init_zone_device_page.constprop.0+0x4/0x1a0 [<900000000105865c>] memmap_init_zone_device+0x11c/0x1b0 [<9000000000575e1c>] memremap_pages+0x24c/0x7b0 [<90000000005763a4>] devm_memremap_pages+0x24/0x80 [<ffff80000296b81c>] kgd2kfd_init_zone_device+0x11c/0x220 [amdgpu] [<ffff80000265d09c>] amdgpu_device_init+0x27dc/0x2bf0 [amdgpu] [<ffff80000265ece8>] amdgpu_driver_load_kms+0x18/0x90 [amdgpu] [<ffff800002651fbc>] amdgpu_pci_probe+0x22c/0x890 [amdgpu] [<9000000000916adc>] local_pci_probe+0x3c/0xb0 [<90000000002976c8>] work_for_cpu_fn+0x18/0x30 [<900000000029aeb4>] process_one_work+0x164/0x320 [<900000000029b96c>] worker_thread+0x37c/0x4a0 [<90000000002a695c>] kthread+0x12c/0x220 [<9000000001055b64>] ret_from_kernel_thread+0x24/0xc0 [<9000000000237524>] ret_from_kernel_thread_asm+0xc/0x88 Code: 00000000 00000000 0280040d <2980d08d> 02bffc0e 2980c08e 02c0208d 29c0208d 1400004f ---[ end trace 0000000000000000 ]--- Or lock up and/or driver reset during computate tasks, such as when running llama.cpp over ROCm, at which point the compute process must be killed before the reset could complete: amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE amdgpu 0000:0a:00.0: amdgpu: failed to remove hardware queue from MES, doorbell=0x1202 amdgpu 0000:0a:00.0: amdgpu: MES might be in unrecoverable state, issue a GPU reset amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 3 amdgpu 0000:0a:00.0: amdgpu: GPU reset begin! amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE amdgpu 0000:0a:00.0: amdgpu: failed to remove hardware queue from MES, doorbell=0x1004 amdgpu 0000:0a:00.0: amdgpu: MES might be in unrecoverable state, issue a GPU reset amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 2 amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 1 amdgpu 0000:0a:00.0: amdgpu: Failed to evict queue 0 amdgpu: Failed to quiesce KFD amdgpu 0000:0a:00.0: amdgpu: Dumping IP State amdgpu 0000:0a:00.0: amdgpu: Dumping IP State Completed amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MES failed to respond to msg=REMOVE_QUEUE [drm:amdgpu_mes_unmap_legacy_queue [amdgpu]] *ERROR* failed to unmap legacy queue amdgpu 0000:0a:00.0: amdgpu: MODE1 reset amdgpu 0000:0a:00.0: amdgpu: GPU mode1 reset amdgpu 0000:0a:00.0: amdgpu: GPU smu mode1 reset amdgpu 0000:0a:00.0: amdgpu: GPU reset succeeded, trying to resume Disabling the aforementioned option makes the issue go away, though it is unclear whether this is a platform-specific issue or one that lies within the amdkfd code. This patch has been tested on all the aforementioned platform combinations, and sent as an RFC to encourage discussion. Signed-off-by: Zhang Yuhao <xinmu@xinmu.moe> Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Mingcong Bai <jeffbai@aosc.io> Link: https://lore.kernel.org/all/20250814032153.227285-1-jeffbai@aosc.io/ Signed-off-by: Mingcong Bai <jeffbai@aosc.io>

In gicv5_irs_of_init_affinity() a WARN_ON() is triggered if: 1) a phandle in the "cpus" property does not correspond to a valid OF node 2 a CPU logical id does not exist for a given OF cpu_node #1 is a firmware bug and should be reported as such but does not warrant a WARN_ON() backtrace. #2 is not necessarily an error condition (eg a kernel can be booted with nr_cpus=X limiting the number of cores artificially) and therefore there is no reason to clutter the kernel log with WARN_ON() output when the condition is hit. Rework the IRS affinity parsing code to remove undue WARN_ON()s thus making it less noisy. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250814094138.1611017-1-lpieralisi@kernel.org

When there are memory-only nodes (nodes without CPUs), these nodes are not properly initialized, causing kernel panic during boot. of_numa_init of_numa_parse_cpu_nodes node_set(nid, numa_nodes_parsed); of_numa_parse_memory_nodes In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes containing CPUs. Memory-only nodes should have been updated in of_numa_parse_memory_nodes, but they weren't. Subsequently, when free_area_init() attempts to access NODE_DATA() for these uninitialized memory nodes, the kernel panics due to NULL pointer dereference. This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes: qemu-system-aarch64 \ -cpu host -nographic \ -m 4G -smp 1 \ -machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \ -object memory-backend-ram,size=2G,id=mem0 \ -object memory-backend-ram,size=2G,id=mem1 \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -kernel $IMAGE \ -hda $DISK \ -append "console=ttyAMA0 root=/dev/vda rw earlycon" [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010] [ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff] [ 0.000000] node 1 must be removed before remove section 23 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 0.000000] Mem abort info: [ 0.000000] ESR = 0x0000000096000004 [ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.000000] SET = 0, FnV = 0 [ 0.000000] EA = 0, S1PTW = 0 [ 0.000000] FSC = 0x04: level 0 translation fault [ 0.000000] Data abort info: [ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.000000] [00000000000000a0] user address but active_mm is swapper [ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty torvalds#54 PREEMPT [ 0.000000] Hardware name: linux,dummy-virt (DT) [ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.000000] pc : free_area_init+0x50c/0xf9c [ 0.000000] lr : free_area_init+0x5c0/0xf9c [ 0.000000] sp : ffffa02ca0f33c00 [ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000 [ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000 [ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368 [ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002 [ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001 [ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002 [ 0.000000] x11: ffffa02ca0fd4f00 x10: ffffa02ca14bab20 x9 : ffffa02ca14bab38 [ 0.000000] x8 : 00000000000c0000 x7 : 0000000000000001 x6 : 0000000000000002 [ 0.000000] x5 : 0000000140000000 x4 : ffffa02ca0f33c90 x3 : ffffa02ca0f33ca0 [ 0.000000] x2 : ffffa02ca0f33c98 x1 : 0000000080000000 x0 : 0000000000000001 [ 0.000000] Call trace: [ 0.000000] free_area_init+0x50c/0xf9c (P) [ 0.000000] bootmem_init+0x110/0x1dc [ 0.000000] setup_arch+0x278/0x60c [ 0.000000] start_kernel+0x70/0x748 [ 0.000000] __primary_switched+0x88/0x90 [ 0.000000] Code: d503201f b98093e0 52800016 f8607a93 (f9405260) [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- Link: https://lkml.kernel.org/r/20250819075510.2079961-1-yintirui@huawei.com Fixes: 7675076 ("arch_numa: switch over to numa_memblks") Signed-off-by: Yin Tirui <yintirui@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Chen Jun <chenjun102@huawei.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com> Cc: Rob Herring <robh@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

While working on the lazy MMU mode enablement for s390 I hit pretty curious issues in the kasan code. The first is related to a custom kasan-based sanitizer aimed at catching invalid accesses to PTEs and is inspired by [1] conversation. The kasan complains on valid PTE accesses, while the shadow memory is reported as unpoisoned: [ 102.783993] ================================================================== [ 102.784008] BUG: KASAN: out-of-bounds in set_pte_range+0x36c/0x390 [ 102.784016] Read of size 8 at addr 0000780084cf9608 by task vmalloc_test/0/5542 [ 102.784019] [ 102.784040] CPU: 1 UID: 0 PID: 5542 Comm: vmalloc_test/0 Kdump: loaded Tainted: G OE 6.16.0-gcc-ipte-kasan-11657-gb2d930c4950e torvalds#340 PREEMPT [ 102.784047] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 102.784049] Hardware name: IBM 8561 T01 703 (LPAR) [ 102.784052] Call Trace: [ 102.784054] [<00007fffe0147ac0>] dump_stack_lvl+0xe8/0x140 [ 102.784059] [<00007fffe0112484>] print_address_description.constprop.0+0x34/0x2d0 [ 102.784066] [<00007fffe011282c>] print_report+0x10c/0x1f8 [ 102.784071] [<00007fffe090785a>] kasan_report+0xfa/0x220 [ 102.784078] [<00007fffe01d3dec>] set_pte_range+0x36c/0x390 [ 102.784083] [<00007fffe01d41c2>] leave_ipte_batch+0x3b2/0xb10 [ 102.784088] [<00007fffe07d3650>] apply_to_pte_range+0x2f0/0x4e0 [ 102.784094] [<00007fffe07e62e4>] apply_to_pmd_range+0x194/0x3e0 [ 102.784099] [<00007fffe07e820e>] __apply_to_page_range+0x2fe/0x7a0 [ 102.784104] [<00007fffe07e86d8>] apply_to_page_range+0x28/0x40 [ 102.784109] [<00007fffe090a3ec>] __kasan_populate_vmalloc+0xec/0x310 [ 102.784114] [<00007fffe090aa36>] kasan_populate_vmalloc+0x96/0x130 [ 102.784118] [<00007fffe0833a04>] alloc_vmap_area+0x3d4/0xf30 [ 102.784123] [<00007fffe083a8ba>] __get_vm_area_node+0x1aa/0x4c0 [ 102.784127] [<00007fffe083c4f6>] __vmalloc_node_range_noprof+0x126/0x4e0 [ 102.784131] [<00007fffe083c980>] __vmalloc_node_noprof+0xd0/0x110 [ 102.784135] [<00007fffe083ca32>] vmalloc_noprof+0x32/0x40 [ 102.784139] [<00007fff608aa336>] fix_size_alloc_test+0x66/0x150 [test_vmalloc] [ 102.784147] [<00007fff608aa710>] test_func+0x2f0/0x430 [test_vmalloc] [ 102.784153] [<00007fffe02841f8>] kthread+0x3f8/0x7a0 [ 102.784159] [<00007fffe014d8b4>] __ret_from_fork+0xd4/0x7d0 [ 102.784164] [<00007fffe299c00a>] ret_from_fork+0xa/0x30 [ 102.784173] no locks held by vmalloc_test/0/5542. [ 102.784176] [ 102.784178] The buggy address belongs to the physical page: [ 102.784186] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x84cf9 [ 102.784198] flags: 0x3ffff00000000000(node=0|zone=1|lastcpupid=0x1ffff) [ 102.784212] page_type: f2(table) [ 102.784225] raw: 3ffff00000000000 0000000000000000 0000000000000122 0000000000000000 [ 102.784234] raw: 0000000000000000 0000000000000000 f200000000000001 0000000000000000 [ 102.784248] page dumped because: kasan: bad access detected [ 102.784250] [ 102.784252] Memory state around the buggy address: [ 102.784260] 0000780084cf9500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 102.784274] 0000780084cf9580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 102.784277] >0000780084cf9600: fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 102.784290] ^ [ 102.784293] 0000780084cf9680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 102.784303] 0000780084cf9700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 102.784306] ================================================================== The second issue hits when the custom sanitizer above is not implemented, but the kasan itself is still active: [ 1554.438028] Unable to handle kernel pointer dereference in virtual kernel address space [ 1554.438065] Failing address: 001c0ff0066f0000 TEID: 001c0ff0066f0403 [ 1554.438076] Fault in home space mode while using kernel ASCE. [ 1554.438103] AS:00000000059d400b R2:0000000ffec5c00b R3:00000000c6c9c007 S:0000000314470001 P:00000000d0ab413d [ 1554.438158] Oops: 0011 ilc:2 [#1]SMP [ 1554.438175] Modules linked in: test_vmalloc(E+) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) sunrpc(E) pkey_pckmo(E) uvdevice(E) s390_trng(E) rng_core(E) eadm_sch(E) vfio_ccw(E) mdev(E) vfio_iommu_type1(E) vfio(E) sch_fq_codel(E) drm(E) loop(E) i2c_core(E) drm_panel_orientation_quirks(E) nfnetlink(E) ctcm(E) fsm(E) zfcp(E) scsi_transport_fc(E) diag288_wdt(E) watchdog(E) ghash_s390(E) prng(E) aes_s390(E) des_s390(E) libdes(E) sha3_512_s390(E) sha3_256_s390(E) sha512_s390(E) sha1_s390(E) sha_common(E) pkey(E) autofs4(E) [ 1554.438319] Unloaded tainted modules: pkey_uv(E):1 hmac_s390(E):2 [ 1554.438354] CPU: 1 UID: 0 PID: 1715 Comm: vmalloc_test/0 Kdump: loaded Tainted: G E 6.16.0-gcc-ipte-kasan-11657-gb2d930c4950e torvalds#350 PREEMPT [ 1554.438368] Tainted: [E]=UNSIGNED_MODULE [ 1554.438374] Hardware name: IBM 8561 T01 703 (LPAR) [ 1554.438381] Krnl PSW : 0704e00180000000 00007fffe1d3d6ae (memset+0x5e/0x98) [ 1554.438396] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 [ 1554.438409] Krnl GPRS: 0000000000000001 001c0ff0066f0000 001c0ff0066f0000 00000000000000f8 [ 1554.438418] 00000000000009fe 0000000000000009 0000000000000000 0000000000000002 [ 1554.438426] 0000000000005000 000078031ae655c8 00000feffdcf9f59 0000780258672a20 [ 1554.438433] 0000780243153500 00007f8033780000 00007fffe083a510 00007f7fee7cfa00 [ 1554.438452] Krnl Code: 00007fffe1d3d6a0: eb540008000c srlg %r5,%r4,8 00007fffe1d3d6a6: b9020055 ltgr %r5,%r5 #00007fffe1d3d6aa: a784000b brc 8,00007fffe1d3d6c0 >00007fffe1d3d6ae: 42301000 stc %r3,0(%r1) 00007fffe1d3d6b2: d2fe10011000 mvc 1(255,%r1),0(%r1) 00007fffe1d3d6b8: 41101100 la %r1,256(%r1) 00007fffe1d3d6bc: a757fff9 brctg %r5,00007fffe1d3d6ae 00007fffe1d3d6c0: 42301000 stc %r3,0(%r1) [ 1554.438539] Call Trace: [ 1554.438545] [<00007fffe1d3d6ae>] memset+0x5e/0x98 [ 1554.438552] ([<00007fffe083a510>] remove_vm_area+0x220/0x400) [ 1554.438562] [<00007fffe083a9d6>] vfree.part.0+0x26/0x810 [ 1554.438569] [<00007fff6073bd50>] fix_align_alloc_test+0x50/0x90 [test_vmalloc] [ 1554.438583] [<00007fff6073c73a>] test_func+0x46a/0x6c0 [test_vmalloc] [ 1554.438593] [<00007fffe0283ac8>] kthread+0x3f8/0x7a0 [ 1554.438603] [<00007fffe014d8b4>] __ret_from_fork+0xd4/0x7d0 [ 1554.438613] [<00007fffe299ac0a>] ret_from_fork+0xa/0x30 [ 1554.438622] INFO: lockdep is turned off. [ 1554.438627] Last Breaking-Event-Address: [ 1554.438632] [<00007fffe1d3d65c>] memset+0xc/0x98 [ 1554.438644] Kernel panic - not syncing: Fatal exception: panic_on_oops This series fixes the above issues and is a pre-requisite for the s390 lazy MMU mode implementation. test_vmalloc was used to stress-test the fixes. This patch (of 2): When vmalloc shadow memory is established the modification of the corresponding page tables is not protected by any locks. Instead, the locking is done per-PTE. This scheme however has defects. kasan_populate_vmalloc_pte() - while ptep_get() read is atomic the sequence pte_none(ptep_get()) is not. Doing that outside of the lock might lead to a concurrent PTE update and what could be seen as a shadow memory corruption as result. kasan_depopulate_vmalloc_pte() - by the time a page whose address was extracted from ptep_get() read and cached in a local variable outside of the lock is attempted to get free, could actually be freed already. To avoid these put ptep_get() itself and the code that manipulates the result of the read under lock. In addition, move freeing of the page out of the atomic context. Link: https://lkml.kernel.org/r/cover.1755528662.git.agordeev@linux.ibm.com Link: https://lkml.kernel.org/r/adb258634194593db294c0d1fb35646e894d6ead.1755528662.git.agordeev@linux.ibm.com Link: https://lore.kernel.org/linux-mm/5b0609c9-95ee-4e48-bb6d-98f57c5d2c31@arm.com/ [1] Fixes: 3c5c3cf ("kasan: support backing vmalloc space with real shadow memory") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Marc Rutland <mark.rutland@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

During our internal testing, we started observing intermittent boot failures when the machine uses 4-level paging and has a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It turns out that the kernel panics while initializing vmemmap (struct page array) when the vmemmap region spans two PGD entries, because the new PGD entry is only installed in init_mm.pgd, but not in the page tables of other tasks. And looking at __populate_section_memmap(): if (vmemmap_can_optimize(altmap, pgmap)) // does not sync top level page tables r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap); else // sync top level page tables in x86 r = vmemmap_populate(start, end, nid, altmap); In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c synchronizes the top level page table (See commit 9b86152 ("x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so that all tasks in the system can see the new vmemmap area. However, when vmemmap_can_optimize() returns true, the optimized path skips synchronization of top-level page tables. This is because vmemmap_populate_compound_pages() is implemented in core MM code, which does not handle synchronization of the top-level page tables. Instead, the core MM has historically relied on each architecture to perform this synchronization manually. We're not the first party to encounter a crash caused by not-sync'd top level page tables: earlier this year, Gwan-gyeong Mun attempted to address the issue [1] [2] after hitting a kernel panic when x86 code accessed the vmemmap area before the corresponding top-level entries were synced. At that time, the issue was believed to be triggered only when struct page was enlarged for debugging purposes, and the patch did not get further updates. It turns out that current approach of relying on each arch to handle the page table sync manually is fragile because 1) it's easy to forget to sync the top level page table, and 2) it's also easy to overlook that the kernel should not access the vmemmap and direct mapping areas before the sync. # The solution: Make page table sync more code robust and harder to miss To address this, Dave Hansen suggested [3] [4] introducing {pgd,p4d}_populate_kernel() for updating kernel portion of the page tables and allow each architecture to explicitly perform synchronization when installing top-level entries. With this approach, we no longer need to worry about missing the sync step, reducing the risk of future regressions. The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK, PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by vmalloc and ioremap to synchronize page tables. pgd_populate_kernel() looks like this: static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, p4d_t *p4d) { pgd_populate(&init_mm, pgd, p4d); if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) arch_sync_kernel_mappings(addr, addr); } It is worth noting that vmalloc() and apply_to_range() carefully synchronizes page tables by calling p*d_alloc_track() and arch_sync_kernel_mappings(), and thus they are not affected by this patch series. This series was hugely inspired by Dave Hansen's suggestion and hence added Suggested-by: Dave Hansen. Cc stable because lack of this series opens the door to intermittent boot failures. This patch (of 3): Move ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to linux/pgtable.h so that they can be used outside of vmalloc and ioremap. Link: https://lkml.kernel.org/r/20250818020206.4517-1-harry.yoo@oracle.com Link: https://lkml.kernel.org/r/20250818020206.4517-2-harry.yoo@oracle.com Link: https://lore.kernel.org/linux-mm/20250220064105.808339-1-gwan-gyeong.mun@intel.com [1] Link: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@intel.com [2] Link: https://lore.kernel.org/linux-mm/d1da214c-53d3-45ac-a8b6-51821c5416e4@intel.com [3] Link: https://lore.kernel.org/linux-mm/4d800744-7b88-41aa-9979-b245e8bf794b@intel.com [4] Fixes: 8d40091 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Acked-by: Kiryl Shutsemau <kas@kernel.org> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: bibo mao <maobibo@loongson.cn> Cc: Borislav Betkov <bp@alien8.de> Cc: Christoph Lameter (Ampere) <cl@gentwo.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…ings() Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel(). This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...] Link: https://lkml.kernel.org/r/20250818020206.4517-4-harry.yoo@oracle.com Fixes: 8d40091 ("x86/vmemmap: handle unpopulated sub-pmd ranges") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Closes: https://lore.kernel.org/linux-mm/20250311114420.240341-1-gwan-gyeong.mun@intel.com [1] Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Kiryl Shutsemau <kas@kernel.org> Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: bibo mao <maobibo@loongson.cn> Cc: Borislav Betkov <bp@alien8.de> Cc: Christoph Lameter (Ampere) <cl@gentwo.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Joao Martins <joao.m.martins@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fix: ls2k500sfb build error, gpio_device_find_by_label should be used

909009a

Zeno-sole force-pushed the 6.9-openkylin branch from 2b35f01 to 909009a Compare April 26, 2024 03:26

MingcongBai closed this Apr 30, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

fix: ls2k500sfb build error, gpio_device_find_by_label should be used #1

fix: ls2k500sfb build error, gpio_device_find_by_label should be used #1

Uh oh!

Zeno-sole commented Apr 25, 2024

Uh oh!

MingcongBai commented Apr 30, 2024

Uh oh!

Uh oh!

fix: ls2k500sfb build error, gpio_device_find_by_label should be used #1

fix: ls2k500sfb build error, gpio_device_find_by_label should be used #1

Uh oh!

Conversation

Zeno-sole commented Apr 25, 2024

Uh oh!

MingcongBai commented Apr 30, 2024

Uh oh!

Uh oh!