Skip to content

Conversation

paralin
Copy link

@paralin paralin commented May 20, 2016

This patch applies aufs 4.2 to the odroid xu4 kernel.

paralin added 2 commits May 20, 2016 10:15
Applying the patches for Aufs 4.2.

Signed-off-by: Christian Stewart <christian@paral.in>
This patch applies (from aufs 4.2):

 - vfs-ino.patch
 - lockdep-debug.patch
 - tmpfs-idr.patch

Signed-off-by: Christian Stewart <christian@paral.in>
@tobetter tobetter merged commit 2bd5324 into tobetter:odroidxu4-v4.2 May 31, 2016
@tobetter
Copy link
Owner

Thank you for patches.

mhaehnel pushed a commit to mhaehnel/linux that referenced this pull request Sep 6, 2016
Sunrise Point PCH with SPS Firmware doesn't expose working
MEI interface, we need to quirk it out.
The SPS Firmware is identifiable only on the first PCI function
of the device.

Cc: <stable@vger.kernel.org> tobetter#4.6+
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mhaehnel pushed a commit to mhaehnel/linux that referenced this pull request Sep 26, 2016
Problems with the signal integrity of the high speed USB data lines or
noise on reference ground lines can cause the i.MX6 USB controller to
violate USB specs and exhibit unexpected behavior.

It was observed that USBi_UI interrupts were triggered first and when
isr_setup_status_phase was called, ci->status was NULL, which lead to a
NULL pointer dereference kernel panic.

This patch fixes the kernel panic, emits a warning once and returns
-EPIPE to halt the device and let the host get stalled.
It also adds a comment to point people, who are experiencing this issue,
to their USB hardware design.

Cc: <stable@vger.kernel.org> tobetter#4.1+
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
mhaehnel pushed a commit to mhaehnel/linux that referenced this pull request Sep 26, 2016
Since commit 4d4c474 ("perf/x86/intel/bts: Fix BTS PMI detection")
my box goes boom on boot:

| .... node  #0, CPUs:      tobetter#1 tobetter#2 tobetter#3 tobetter#4 tobetter#5 tobetter#6 tobetter#7
| BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
| IP: [<ffffffff8100c463>] intel_bts_interrupt+0x43/0x130
| Call Trace:
|  <NMI> d [<ffffffff8100b341>] intel_pmu_handle_irq+0x51/0x4b0
|  [<ffffffff81004d47>] perf_event_nmi_handler+0x27/0x40

This happens because the code introduced in this commit dereferences the
debug store pointer unconditionally. The debug store is not guaranteed to
be available, so a NULL pointer check as on other places is required.

Fixes: 4d4c474 ("perf/x86/intel/bts: Fix BTS PMI detection")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: vince@deater.net
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20160920131220.xg5pbdjtznszuyzb@breakpoint.cc
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
bkrepo pushed a commit to bkrepo/linux that referenced this pull request Oct 28, 2016
commit 86a574d upstream.

Don't allow RNDADDTOENTCNT or RNDADDENTROPY to accept a negative
entropy value.  It doesn't make any sense to subtract from the entropy
counter, and it can trigger a warning:

random: negative entropy/overflow: pool input count -40000
------------[ cut here ]------------
WARNING: CPU: 3 PID: 6828 at drivers/char/random.c:670[<      none
 >] credit_entropy_bits+0x21e/0xad0 drivers/char/random.c:670
Modules linked in:
CPU: 3 PID: 6828 Comm: a.out Not tainted 4.7.0-rc4+ tobetter#4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 ffffffff880b58e0 ffff88005dd9fcb0 ffffffff82cc838f ffffffff87158b40
 fffffbfff1016b1c 0000000000000000 0000000000000000 ffffffff87158b40
 ffffffff83283dae 0000000000000009 ffff88005dd9fcf8 ffffffff8136d27f
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff82cc838f>] dump_stack+0x12e/0x18f lib/dump_stack.c:51
 [<ffffffff8136d27f>] __warn+0x19f/0x1e0 kernel/panic.c:516
 [<ffffffff8136d48c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:551
 [<ffffffff83283dae>] credit_entropy_bits+0x21e/0xad0 drivers/char/random.c:670
 [<     inline     >] credit_entropy_bits_safe drivers/char/random.c:734
 [<ffffffff8328785d>] random_ioctl+0x21d/0x250 drivers/char/random.c:1546
 [<     inline     >] vfs_ioctl fs/ioctl.c:43
 [<ffffffff8185316c>] do_vfs_ioctl+0x18c/0xff0 fs/ioctl.c:674
 [<     inline     >] SYSC_ioctl fs/ioctl.c:689
 [<ffffffff8185405f>] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:680
 [<ffffffff86a995c0>] entry_SYSCALL_64_fastpath+0x23/0xc1
arch/x86/entry/entry_64.S:207
---[ end trace 5d4902b2ba842f1f ]---

This was triggered using the test program:

// autogenerated by syzkaller (http://github.com/google/syzkaller)

int main() {
        int fd = open("/dev/random", O_RDWR);
        int val = -5000;
        ioctl(fd, RNDADDTOENTCNT, &val);
        return 0;
}

It's harmless in that (a) only root can trigger it, and (b) after
complaining the code never does let the entropy count go negative, but
it's better to simply not allow this userspace from passing in a
negative entropy value altogether.

Google-Bug-Id: #29575089
Reported-By: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bkrepo pushed a commit to bkrepo/linux that referenced this pull request Oct 28, 2016
commit 6039892 upstream.

With debugobjects enabled and using SLAB_DESTROY_BY_RCU, when a
kmem_cache_node is destroyed the call_rcu() may trigger a slab
allocation to fill the debug object pool (__debug_object_init:fill_pool).

Everywhere but during kmem_cache_destroy(), discard_slab() is performed
outside of the kmem_cache_node->list_lock and avoids a lockdep warning
about potential recursion:

  =============================================
  [ INFO: possible recursive locking detected ]
  4.8.0-rc1-gfxbench+ tobetter#1 Tainted: G     U
  ---------------------------------------------
  rmmod/8895 is trying to acquire lock:
   (&(&n->list_lock)->rlock){-.-...}, at: [<ffffffff811c80d7>] get_partial_node.isra.63+0x47/0x430

  but task is already holding lock:
   (&(&n->list_lock)->rlock){-.-...}, at: [<ffffffff811cbda4>] __kmem_cache_shutdown+0x54/0x320

  other info that might help us debug this:
  Possible unsafe locking scenario:
        CPU0
        ----
   lock(&(&n->list_lock)->rlock);
   lock(&(&n->list_lock)->rlock);

   *** DEADLOCK ***
   May be due to missing lock nesting notation
   5 locks held by rmmod/8895:
   #0:  (&dev->mutex){......}, at: driver_detach+0x42/0xc0
   tobetter#1:  (&dev->mutex){......}, at: driver_detach+0x50/0xc0
   tobetter#2:  (cpu_hotplug.dep_map){++++++}, at: get_online_cpus+0x2d/0x80
   tobetter#3:  (slab_mutex){+.+.+.}, at: kmem_cache_destroy+0x3c/0x220
   tobetter#4:  (&(&n->list_lock)->rlock){-.-...}, at: __kmem_cache_shutdown+0x54/0x320

  stack backtrace:
  CPU: 6 PID: 8895 Comm: rmmod Tainted: G     U          4.8.0-rc1-gfxbench+ tobetter#1
  Hardware name: Gigabyte Technology Co., Ltd. H87M-D3H/H87M-D3H, BIOS F11 08/18/2015
  Call Trace:
    __lock_acquire+0x1646/0x1ad0
    lock_acquire+0xb2/0x200
    _raw_spin_lock+0x36/0x50
    get_partial_node.isra.63+0x47/0x430
    ___slab_alloc.constprop.67+0x1a7/0x3b0
    __slab_alloc.isra.64.constprop.66+0x43/0x80
    kmem_cache_alloc+0x236/0x2d0
    __debug_object_init+0x2de/0x400
    debug_object_activate+0x109/0x1e0
    __call_rcu.constprop.63+0x32/0x2f0
    call_rcu+0x12/0x20
    discard_slab+0x3d/0x40
    __kmem_cache_shutdown+0xdb/0x320
    shutdown_cache+0x19/0x60
    kmem_cache_destroy+0x1ae/0x220
    i915_gem_load_cleanup+0x14/0x40 [i915]
    i915_driver_unload+0x151/0x180 [i915]
    i915_pci_remove+0x14/0x20 [i915]
    pci_device_remove+0x34/0xb0
    __device_release_driver+0x95/0x140
    driver_detach+0xb6/0xc0
    bus_remove_driver+0x53/0xd0
    driver_unregister+0x27/0x50
    pci_unregister_driver+0x25/0x70
    i915_exit+0x1a/0x1e2 [i915]
    SyS_delete_module+0x193/0x1f0
    entry_SYSCALL_64_fastpath+0x1c/0xac

Fixes: 52b4b95 ("mm: slab: free kmem_cache_node after destroy sysfs file")
Link: http://lkml.kernel.org/r/1470759070-18743-1-git-send-email-chris@chris-wilson.co.uk
Reported-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bkrepo pushed a commit to bkrepo/linux that referenced this pull request Oct 28, 2016
[ Upstream commit 94d9f1c ]

Panic occurs when issuing "cat /proc/net/route" whilst
populating FIB with > 1M routes.

Use of cached node pointer in fib_route_get_idx is unsafe.

 BUG: unable to handle kernel paging request at ffffc90001630024
 IP: [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0
 PGD 11b08d067 PUD 11b08e067 PMD dac4b067 PTE 0
 Oops: 0000 [tobetter#1] SMP
 Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscac
 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep virti
 acpi_cpufreq button parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd
tio_ring virtio floppy uhci_hcd ehci_hcd usbcore usb_common libata scsi_mod
 CPU: 1 PID: 785 Comm: cat Not tainted 4.2.0-rc8+ tobetter#4
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
 task: ffff8800da1c0bc0 ti: ffff88011a05c000 task.ti: ffff88011a05c000
 RIP: 0010:[<ffffffff814cf6a0>]  [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0
 RSP: 0018:ffff88011a05fda0  EFLAGS: 00010202
 RAX: ffff8800d8a40c00 RBX: ffff8800da4af940 RCX: ffff88011a05ff20
 RDX: ffffc90001630020 RSI: 0000000001013531 RDI: ffff8800da4af950
 RBP: 0000000000000000 R08: ffff8800da1f9a00 R09: 0000000000000000
 R10: ffff8800db45b7e4 R11: 0000000000000246 R12: ffff8800da4af950
 R13: ffff8800d97a74c0 R14: 0000000000000000 R15: ffff8800d97a7480
 FS:  00007fd3970e0700(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffffc90001630024 CR3: 000000011a7e4000 CR4: 00000000000006e0
 Stack:
  ffffffff814d00d3 0000000000000000 ffff88011a05ff20 ffff8800da1f9a00
  ffffffff811dd8b9 0000000000000800 0000000000020000 00007fd396f35000
  ffffffff811f8714 0000000000003431 ffffffff8138dce0 0000000000000f80
 Call Trace:
  [<ffffffff814d00d3>] ? fib_route_seq_start+0x93/0xc0
  [<ffffffff811dd8b9>] ? seq_read+0x149/0x380
  [<ffffffff811f8714>] ? fsnotify+0x3b4/0x500
  [<ffffffff8138dce0>] ? process_echoes+0x70/0x70
  [<ffffffff8121cfa7>] ? proc_reg_read+0x47/0x70
  [<ffffffff811bb823>] ? __vfs_read+0x23/0xd0
  [<ffffffff811bbd42>] ? rw_verify_area+0x52/0xf0
  [<ffffffff811bbe61>] ? vfs_read+0x81/0x120
  [<ffffffff811bcbc2>] ? SyS_read+0x42/0xa0
  [<ffffffff81549ab2>] ? entry_SYSCALL_64_fastpath+0x16/0x75
 Code: 48 85 c0 75 d8 f3 c3 31 c0 c3 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00
a 04 89 f0 33 02 44 89 c9 48 d3 e8 0f b6 4a 05 49 89
 RIP  [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0
  RSP <ffff88011a05fda0>
 CR2: ffffc90001630024

Signed-off-by: Dave Forster <dforster@brocade.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bkrepo pushed a commit to bkrepo/linux that referenced this pull request Oct 28, 2016
commit 420902c upstream.

If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can
deadlock our own worker - mount blocks kworker/3:2, sleeps forever more.

crash> ps|grep UN
    715      2   3  ffff880220734d30  UN   0.0       0      0  [kworker/3:2]
   9369   9341   2  ffff88021ffb7560  UN   1.3  493404 123184  Xorg
   9665   9664   3  ffff880225b92ab0  UN   0.0   47368    812  udisks-daemon
  10635  10403   3  ffff880222f22c70  UN   0.0   14904    936  mount
crash> bt ffff880220734d30
PID: 715    TASK: ffff880220734d30  CPU: 3   COMMAND: "kworker/3:2"
 #0 [ffff8802244c3c20] schedule at ffffffff8144584b
 tobetter#1 [ffff8802244c3cc8] __rt_mutex_slowlock at ffffffff814472b3
 tobetter#2 [ffff8802244c3d28] rt_mutex_slowlock at ffffffff814473f5
 tobetter#3 [ffff8802244c3dc8] reiserfs_write_lock at ffffffffa05f28fd [reiserfs]
 tobetter#4 [ffff8802244c3de8] flush_async_commits at ffffffffa05ec91d [reiserfs]
 tobetter#5 [ffff8802244c3e08] process_one_work at ffffffff81073726
 tobetter#6 [ffff8802244c3e68] worker_thread at ffffffff81073eba
 tobetter#7 [ffff8802244c3ec8] kthread at ffffffff810782e0
 tobetter#8 [ffff8802244c3f48] kernel_thread_helper at ffffffff81450064
crash> rd ffff8802244c3cc8 10
ffff8802244c3cc8:  ffffffff814472b3 ffff880222f23250   .rD.....P2."....
ffff8802244c3cd8:  0000000000000000 0000000000000286   ................
ffff8802244c3ce8:  ffff8802244c3d30 ffff880220734d80   0=L$.....Ms ....
ffff8802244c3cf8:  ffff880222e8f628 0000000000000000   (.."............
ffff8802244c3d08:  0000000000000000 0000000000000002   ................
crash> struct rt_mutex ffff880222e8f628
struct rt_mutex {
  wait_lock = {
    raw_lock = {
      slock = 65537
    }
  },
  wait_list = {
    node_list = {
      next = 0xffff8802244c3d48,
      prev = 0xffff8802244c3d48
    }
  },
  owner = 0xffff880222f22c71,
  save_state = 0
}
crash> bt 0xffff880222f22c70
PID: 10635  TASK: ffff880222f22c70  CPU: 3   COMMAND: "mount"
 #0 [ffff8802216a9868] schedule at ffffffff8144584b
 tobetter#1 [ffff8802216a9910] schedule_timeout at ffffffff81446865
 tobetter#2 [ffff8802216a99a0] wait_for_common at ffffffff81445f74
 tobetter#3 [ffff8802216a9a30] flush_work at ffffffff810712d3
 tobetter#4 [ffff8802216a9ab0] schedule_on_each_cpu at ffffffff81074463
 tobetter#5 [ffff8802216a9ae0] invalidate_bdev at ffffffff81178aba
 tobetter#6 [ffff8802216a9af0] vfs_load_quota_inode at ffffffff811a3632
 tobetter#7 [ffff8802216a9b50] dquot_quota_on_mount at ffffffff811a375c
 tobetter#8 [ffff8802216a9b80] finish_unfinished at ffffffffa05dd8b0 [reiserfs]
 tobetter#9 [ffff8802216a9cc0] reiserfs_fill_super at ffffffffa05de825 [reiserfs]
    RIP: 00007f7b9303997a  RSP: 00007ffff443c7a8  RFLAGS: 00010202
    RAX: 00000000000000a5  RBX: ffffffff8144ef12  RCX: 00007f7b932e9ee0
    RDX: 00007f7b93d9a400  RSI: 00007f7b93d9a3e0  RDI: 00007f7b93d9a3c0
    RBP: 00007f7b93d9a2c0   R8: 00007f7b93d9a550   R9: 0000000000000001
    R10: ffffffffc0ed040e  R11: 0000000000000202  R12: 000000000000040e
    R13: 0000000000000000  R14: 00000000c0ed040e  R15: 00007ffff443ca20
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Oct 16, 2017
This patch fixes a regression caused by the new changes
in the "run wake" handlers.

The mei devices that support D0i3 are no longer receiving an interrupt
after entering runtime suspend state and will stall.

pci_dev_run_wake function now returns "true" for some devices
(including mei) for which it used to return "false",
arguably incorrectly as "run wake" used to mean that
wakeup signals can be generated for a device in
the working state of the system, so it could not be enabled
or disabled before too.

MEI maps runtime suspend/resume to its own defined
power gating (PG) states, (D0i3 or other depending on generation),
hence we need to go around the native PCI runtime service which
eventually brings the device into D3cold/hot state,
but the mei devices cannot wake up from D3 unlike from D0i3/PG state,
which keeps irq running.
To get around PCI device native runtime pm,
MEI uses runtime pm domain handlers which take precedence.

Cc: <stable@vger.kernel.org> #4.13+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Oct 16, 2017
ppp_release() tries to ensure that netdevices are unregistered before
decrementing the unit refcount and running ppp_destroy_interface().

This is all fine as long as the the device is unregistered by
ppp_release(): the unregister_netdevice() call, followed by
rtnl_unlock(), guarantee that the unregistration process completes
before rtnl_unlock() returns.

However, the device may be unregistered by other means (like
ppp_nl_dellink()). If this happens right before ppp_release() calling
rtnl_lock(), then ppp_release() has to wait for the concurrent
unregistration code to release the lock.
But rtnl_unlock() releases the lock before completing the device
unregistration process. This allows ppp_release() to proceed and
eventually call ppp_destroy_interface() before the unregistration
process completes. Calling free_netdev() on this partially unregistered
device will BUG():

 ------------[ cut here ]------------
 kernel BUG at net/core/dev.c:8141!
 invalid opcode: 0000 [#1] SMP

 CPU: 1 PID: 1557 Comm: pppd Not tainted 4.14.0-rc2+ #4
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014

 Call Trace:
  ppp_destroy_interface+0xd8/0xe0 [ppp_generic]
  ppp_disconnect_channel+0xda/0x110 [ppp_generic]
  ppp_unregister_channel+0x5e/0x110 [ppp_generic]
  pppox_unbind_sock+0x23/0x30 [pppox]
  pppoe_connect+0x130/0x440 [pppoe]
  SYSC_connect+0x98/0x110
  ? do_fcntl+0x2c0/0x5d0
  SyS_connect+0xe/0x10
  entry_SYSCALL_64_fastpath+0x1a/0xa5

 RIP: free_netdev+0x107/0x110 RSP: ffffc28a40573d88
 ---[ end trace ed294ff0cc40eeff ]---

We could set the ->needs_free_netdev flag on PPP devices and move the
ppp_destroy_interface() logic in the ->priv_destructor() callback. But
that'd be quite intrusive as we'd first need to unlink from the other
channels and units that depend on the device (the ones that used the
PPPIOCCONNECT and PPPIOCATTACH ioctls).

Instead, we can just let the netdevice hold a reference on its
ppp_file. This reference is dropped in ->priv_destructor(), at the very
end of the unregistration process, so that neither ppp_release() nor
ppp_disconnect_channel() can call ppp_destroy_interface() in the interim.

Reported-by: Beniamino Galvani <bgalvani@redhat.com>
Fixes: 8cb775b ("ppp: fix device unregistration upon netns deletion")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
tobetter pushed a commit that referenced this pull request Oct 16, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 1990.972058] ======================================================
[ 1990.978172] WARNING: possible circular locking dependency detected
[ 1990.984327] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 1990.989783] ------------------------------------------------------
[ 1990.995937] qtdemux0:sink/2765 is trying to acquire lock:
[ 1991.001309]  (&gsc->lock){+.+.}, at: [<bf1729f0>] gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.009108]
               but task is already holding lock:
[ 1991.014913]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.021932]
               which lock already depends on the new lock.

[ 1991.030078]
               the existing dependency chain (in reverse order) is:
[ 1991.037530]
               -> #1 (&mm->mmap_sem){++++}:
[ 1991.042913]        __might_fault+0x80/0xb0
[ 1991.047096]        video_usercopy+0x1cc/0x510 [videodev]
[ 1991.052297]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 1991.057036]        do_vfs_ioctl+0xa0/0xa18
[ 1991.061102]        SyS_ioctl+0x34/0x5c
[ 1991.064834]        ret_fast_syscall+0x0/0x28
[ 1991.069072]
               -> #0 (&gsc->lock){+.+.}:
[ 1991.074193]        lock_acquire+0x6c/0x88
[ 1991.078179]        __mutex_lock+0x68/0xa34
[ 1991.082247]        mutex_lock_interruptible_nested+0x1c/0x24
[ 1991.087888]        gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.093029]        v4l2_mmap+0x54/0x88 [videodev]
[ 1991.097673]        mmap_region+0x3a8/0x638
[ 1991.101743]        do_mmap+0x330/0x3a4
[ 1991.105470]        vm_mmap_pgoff+0x90/0xb8
[ 1991.109542]        SyS_mmap_pgoff+0x90/0xc0
[ 1991.113702]        ret_fast_syscall+0x0/0x28
[ 1991.117945]
               other info that might help us debug this:

[ 1991.125918]  Possible unsafe locking scenario:

[ 1991.131810]        CPU0                    CPU1
[ 1991.136315]        ----                    ----
[ 1991.140821]   lock(&mm->mmap_sem);
[ 1991.144201]                                lock(&gsc->lock);
[ 1991.149833]                                lock(&mm->mmap_sem);
[ 1991.155725]   lock(&gsc->lock);
[ 1991.158845]
                *** DEADLOCK ***

[ 1991.164740] 1 lock held by qtdemux0:sink/2765:
[ 1991.169157]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.176609]
               stack backtrace:
[ 1991.180946] CPU: 2 PID: 2765 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 1991.189608] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 1991.195686] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 1991.203393] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 1991.210586] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 1991.218644] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 1991.227049] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 1991.235281] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 1991.242993] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 1991.250620] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 1991.259812] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf1729f0>] (gsc_m2m_mmap+0x24/0x5c [exynos_gsc])
[ 1991.270159] [<bf1729f0>] (gsc_m2m_mmap [exynos_gsc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 1991.279510] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 1991.287792] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 1991.294986] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 1991.302178] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 1991.309977] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Oct 16, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 2106.181412] ======================================================
[ 2106.187563] WARNING: possible circular locking dependency detected
[ 2106.193718] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 2106.199175] ------------------------------------------------------
[ 2106.205328] qtdemux0:sink/2614 is trying to acquire lock:
[ 2106.210701]  (&dev->mfc_mutex){+.+.}, at: [<bf175544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.218672]
[ 2106.218672] but task is already holding lock:
[ 2106.224477]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.231497]
[ 2106.231497] which lock already depends on the new lock.
[ 2106.231497]
[ 2106.239642]
[ 2106.239642] the existing dependency chain (in reverse order) is:
[ 2106.247095]
[ 2106.247095] -> #1 (&mm->mmap_sem){++++}:
[ 2106.252473]        __might_fault+0x80/0xb0
[ 2106.256567]        video_usercopy+0x1cc/0x510 [videodev]
[ 2106.261845]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 2106.266596]        do_vfs_ioctl+0xa0/0xa18
[ 2106.270667]        SyS_ioctl+0x34/0x5c
[ 2106.274395]        ret_fast_syscall+0x0/0x28
[ 2106.278637]
[ 2106.278637] -> #0 (&dev->mfc_mutex){+.+.}:
[ 2106.284186]        lock_acquire+0x6c/0x88
[ 2106.288173]        __mutex_lock+0x68/0xa34
[ 2106.292244]        mutex_lock_interruptible_nested+0x1c/0x24
[ 2106.297893]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.302747]        v4l2_mmap+0x54/0x88 [videodev]
[ 2106.307409]        mmap_region+0x3a8/0x638
[ 2106.311480]        do_mmap+0x330/0x3a4
[ 2106.315207]        vm_mmap_pgoff+0x90/0xb8
[ 2106.319279]        SyS_mmap_pgoff+0x90/0xc0
[ 2106.323439]        ret_fast_syscall+0x0/0x28
[ 2106.327683]
[ 2106.327683] other info that might help us debug this:
[ 2106.327683]
[ 2106.335656]  Possible unsafe locking scenario:
[ 2106.335656]
[ 2106.341548]        CPU0                    CPU1
[ 2106.346053]        ----                    ----
[ 2106.350559]   lock(&mm->mmap_sem);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.365897]   lock(&dev->mfc_mutex);
[ 2106.369450]
[ 2106.369450]  *** DEADLOCK ***
[ 2106.369450]
[ 2106.375344] 1 lock held by qtdemux0:sink/2614:
[ 2106.379762]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.387214]
[ 2106.387214] stack backtrace:
[ 2106.391550] CPU: 7 PID: 2614 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 2106.400213] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 2106.406285] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 2106.413995] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 2106.421187] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 2106.429245] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 2106.437651] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 2106.445883] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 2106.453596] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 2106.461221] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 2106.470425] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf175544>] (s5p_mfc_mmap+0x28/0xd4 [s5p_mfc])
[ 2106.480494] [<bf175544>] (s5p_mfc_mmap [s5p_mfc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 2106.489575] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 2106.497875] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 2106.505068] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 2106.512260] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 2106.520059] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Oct 29, 2017
v4.10 commit 6f2ce1c ("scsi: zfcp: fix rport unblock race with LUN
recovery") extended accessing parent pointer fields of struct
zfcp_erp_action for tracing.  If an erp_action has never been enqueued
before, these parent pointer fields are uninitialized and NULL. Examples
are zfcp objects freshly added to the parent object's children list,
before enqueueing their first recovery subsequently. In
zfcp_erp_try_rport_unblock(), we iterate such list. Accessing erp_action
fields can cause a NULL pointer dereference.  Since the kernel can read
from lowcore on s390, it does not immediately cause a kernel page
fault. Instead it can cause hangs on trying to acquire the wrong
erp_action->adapter->dbf->rec_lock in zfcp_dbf_rec_action_lvl()
                      ^bogus^
while holding already other locks with IRQs disabled.

Real life example from attaching lots of LUNs in parallel on many CPUs:

crash> bt 17723
PID: 17723  TASK: ...               CPU: 25  COMMAND: "zfcperp0.0.1800"
 LOWCORE INFO:
  -psw      : 0x0404300180000000 0x000000000038e424
  -function : _raw_spin_lock_wait_flags at 38e424
...
 #0 [fdde8fc90] zfcp_dbf_rec_action_lvl at 3e0004e9862 [zfcp]
 #1 [fdde8fce8] zfcp_erp_try_rport_unblock at 3e0004dfddc [zfcp]
 #2 [fdde8fd38] zfcp_erp_strategy at 3e0004e0234 [zfcp]
 #3 [fdde8fda8] zfcp_erp_thread at 3e0004e0a12 [zfcp]
 #4 [fdde8fe60] kthread at 173550
 #5 [fdde8feb8] kernel_thread_starter at 10add2

zfcp_adapter
 zfcp_port
  zfcp_unit <address>, 0x404040d600000000
  scsi_device NULL, returning early!
zfcp_scsi_dev.status = 0x40000000
0x40000000 ZFCP_STATUS_COMMON_RUNNING

crash> zfcp_unit <address>
struct zfcp_unit {
  erp_action = {
    adapter = 0x0,
    port = 0x0,
    unit = 0x0,
  },
}

zfcp_erp_action is always fully embedded into its container object. Such
container object is never moved in its object tree (only add or delete).
Hence, erp_action parent pointers can never change.

To fix the issue, initialize the erp_action parent pointers before
adding the erp_action container to any list and thus before it becomes
accessible from outside of its initializing function.

In order to also close the time window between zfcp_erp_setup_act()
memsetting the entire erp_action to zero and setting the parent pointers
again, drop the memset and instead explicitly initialize individually
all erp_action fields except for parent pointers. To be extra careful
not to introduce any other unintended side effect, even keep zeroing the
erp_action fields for list and timer. Also double-check with
WARN_ON_ONCE that erp_action parent pointers never change, so we get to
know when we would deviate from previous behavior.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 6f2ce1c ("scsi: zfcp: fix rport unblock race with LUN recovery")
Cc: <stable@vger.kernel.org> #2.6.32+
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
tobetter pushed a commit that referenced this pull request Oct 29, 2017
Thomas reported that 'perf buildid-list' gets a SEGFAULT due to NULL
pointer deref when he ran it on a data with namespace events.  It was
because the buildid_id__mark_dso_hit_ops lacks the namespace event
handler and perf_too__fill_default() didn't set it.

  Program received signal SIGSEGV, Segmentation fault.
  0x0000000000000000 in ?? ()
  Missing separate debuginfos, use: dnf debuginfo-install audit-libs-2.7.7-1.fc25.s390x bzip2-libs-1.0.6-21.fc25.s390x elfutils-libelf-0.169-1.fc25.s390x
  +elfutils-libs-0.169-1.fc25.s390x libcap-ng-0.7.8-1.fc25.s390x numactl-libs-2.0.11-2.ibm.fc25.s390x openssl-libs-1.1.0e-1.1.ibm.fc25.s390x perl-libs-5.24.1-386.fc25.s390x
  +python-libs-2.7.13-2.fc25.s390x slang-2.3.0-7.fc25.s390x xz-libs-5.2.3-2.fc25.s390x zlib-1.2.8-10.fc25.s390x
  (gdb) where
  #0  0x0000000000000000 in ?? ()
  #1  0x00000000010fad6a in machines__deliver_event (machines=<optimized out>, machines@entry=0x2c6fd18,
      evlist=<optimized out>, event=event@entry=0x3fffdf00470, sample=0x3ffffffe880, sample@entry=0x3ffffffe888,
      tool=tool@entry=0x1312968 <build_id.mark_dso_hit_ops>, file_offset=1136) at util/session.c:1287
  #2  0x00000000010fbf4e in perf_session__deliver_event (file_offset=1136, tool=0x1312968 <build_id.mark_dso_hit_ops>,
      sample=0x3ffffffe888, event=0x3fffdf00470, session=0x2c6fc30) at util/session.c:1340
  #3  perf_session__process_event (session=0x2c6fc30, session@entry=0x0, event=event@entry=0x3fffdf00470,
      file_offset=file_offset@entry=1136) at util/session.c:1522
  #4  0x00000000010fddde in __perf_session__process_events (file_size=11880, data_size=<optimized out>,
      data_offset=<optimized out>, session=0x0) at util/session.c:1899
  #5  perf_session__process_events (session=0x0, session@entry=0x2c6fc30) at util/session.c:1953
  #6  0x000000000103b2ac in perf_session__list_build_ids (with_hits=<optimized out>, force=<optimized out>)
      at builtin-buildid-list.c:83
  #7  cmd_buildid_list (argc=<optimized out>, argv=<optimized out>) at builtin-buildid-list.c:115
  #8  0x00000000010a026c in run_builtin (p=0x1311f78 <commands+24>, argc=argc@entry=2, argv=argv@entry=0x3fffffff3c0)
      at perf.c:296
  #9  0x000000000102bc00 in handle_internal_command (argv=<optimized out>, argc=2) at perf.c:348
  #10 run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:392
  #11 main (argc=<optimized out>, argv=0x3fffffff3c0) at perf.c:536
  (gdb)

Fix it by adding a stub event handler for namespace event.

Committer testing:

Further clarifying, plain using 'perf buildid-list' will not end up in a
SEGFAULT when processing a perf.data file with namespace info:

  # perf record -a --namespaces sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 2.024 MB perf.data (1058 samples) ]
  # perf buildid-list | wc -l
  38
  # perf buildid-list | head -5
  e2a171c7b905826fc8494f0711ba76ab6abbd604 /lib/modules/4.14.0-rc3+/build/vmlinux
  874840a02d8f8a31cedd605d0b8653145472ced3 /lib/modules/4.14.0-rc3+/kernel/arch/x86/kvm/kvm-intel.ko
  ea7223776730cd8a22f320040aae4d54312984bc /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/i915/i915.ko
  5961535e6732a8edb7f22b3f148bb2fa2e0be4b9 /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/drm.ko
  f045f54aa78cf1931cc893f78b6cbc52c72a8cb1 /usr/lib64/libc-2.25.so
  #

It is only when one asks for checking what of those entries actually had
samples, i.e. when we use either -H or --with-hits, that we will process
all the PERF_RECORD_ events, and since tools/perf/builtin-buildid-list.c
neither explicitely set a perf_tool.namespaces() callback nor the
default stub was set that we end up, when processing a
PERF_RECORD_NAMESPACE record, causing a SEGFAULT:

  # perf buildid-list -H
  Segmentation fault (core dumped)
  ^C
  #

Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Fixes: f3b3614 ("perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info")
Link: http://lkml.kernel.org/r/20171017132900.11043-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tobetter pushed a commit that referenced this pull request Oct 29, 2017
When an EMAD is transmitted, a timeout work item is scheduled with a
delay of 200ms, so that another EMAD will be retried until a maximum of
five retries.

In certain situations, it's possible for the function waiting on the
EMAD to be associated with a work item that is queued on the same
workqueue (`mlxsw_core`) as the timeout work item. This results in
flushing a work item on the same workqueue.

According to commit e159489 ("workqueue: relax lockdep annotation
on flush_work()") the above may lead to a deadlock in case the workqueue
has only one worker active or if the system in under memory pressure and
the rescue worker is in use. The latter explains the very rare and
random nature of the lockdep splats we have been seeing:

[   52.730240] ============================================
[   52.736179] WARNING: possible recursive locking detected
[   52.742119] 4.14.0-rc3jiri+ #4 Not tainted
[   52.746697] --------------------------------------------
[   52.752635] kworker/1:3/599 is trying to acquire lock:
[   52.758378]  (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c4fa4>] flush_work+0x3a4/0x5e0
[   52.767837]
               but task is already holding lock:
[   52.774360]  (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[   52.784495]
               other info that might help us debug this:
[   52.791794]  Possible unsafe locking scenario:
[   52.798413]        CPU0
[   52.801144]        ----
[   52.803875]   lock(mlxsw_core_driver_name);
[   52.808556]   lock(mlxsw_core_driver_name);
[   52.813236]
                *** DEADLOCK ***
[   52.819857]  May be due to missing lock nesting notation
[   52.827450] 3 locks held by kworker/1:3/599:
[   52.832221]  #0:  (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[   52.842846]  #1:  ((&(&bridge->fdb_notify.dw)->work)){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[   52.854537]  #2:  (rtnl_mutex){+.+.}, at: [<ffffffff822ad8e7>] rtnl_lock+0x17/0x20
[   52.863021]
               stack backtrace:
[   52.867890] CPU: 1 PID: 599 Comm: kworker/1:3 Not tainted 4.14.0-rc3jiri+ #4
[   52.875773] Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016
[   52.886267] Workqueue: mlxsw_core mlxsw_sp_fdb_notify_work [mlxsw_spectrum]
[   52.894060] Call Trace:
[   52.909122]  __lock_acquire+0xf6f/0x2a10
[   53.025412]  lock_acquire+0x158/0x440
[   53.047557]  flush_work+0x3c4/0x5e0
[   53.087571]  __cancel_work_timer+0x3ca/0x5e0
[   53.177051]  cancel_delayed_work_sync+0x13/0x20
[   53.182142]  mlxsw_reg_trans_bulk_wait+0x12d/0x7a0 [mlxsw_core]
[   53.194571]  mlxsw_core_reg_access+0x586/0x990 [mlxsw_core]
[   53.225365]  mlxsw_reg_query+0x10/0x20 [mlxsw_core]
[   53.230882]  mlxsw_sp_fdb_notify_work+0x2a3/0x9d0 [mlxsw_spectrum]
[   53.237801]  process_one_work+0x8f1/0x12f0
[   53.321804]  worker_thread+0x1fd/0x10c0
[   53.435158]  kthread+0x28e/0x370
[   53.448703]  ret_from_fork+0x2a/0x40
[   53.453017] mlxsw_spectrum 0000:01:00.0: EMAD retries (2/5) (tid=bf4549b100000774)
[   53.453119] mlxsw_spectrum 0000:01:00.0: EMAD retries (5/5) (tid=bf4549b100000770)
[   53.453132] mlxsw_spectrum 0000:01:00.0: EMAD reg access failed (tid=bf4549b100000770,reg_id=200b(sfn),type=query,status=0(operation performed))
[   53.453143] mlxsw_spectrum 0000:01:00.0: Failed to get FDB notifications

Fix this by creating another workqueue for EMAD timeouts, thereby
preventing the situation of a work item trying to flush a work item
queued on the same workqueue.

Fixes: caf7297 ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tobetter pushed a commit that referenced this pull request Oct 29, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 1990.972058] ======================================================
[ 1990.978172] WARNING: possible circular locking dependency detected
[ 1990.984327] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 1990.989783] ------------------------------------------------------
[ 1990.995937] qtdemux0:sink/2765 is trying to acquire lock:
[ 1991.001309]  (&gsc->lock){+.+.}, at: [<bf1729f0>] gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.009108]
               but task is already holding lock:
[ 1991.014913]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.021932]
               which lock already depends on the new lock.

[ 1991.030078]
               the existing dependency chain (in reverse order) is:
[ 1991.037530]
               -> #1 (&mm->mmap_sem){++++}:
[ 1991.042913]        __might_fault+0x80/0xb0
[ 1991.047096]        video_usercopy+0x1cc/0x510 [videodev]
[ 1991.052297]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 1991.057036]        do_vfs_ioctl+0xa0/0xa18
[ 1991.061102]        SyS_ioctl+0x34/0x5c
[ 1991.064834]        ret_fast_syscall+0x0/0x28
[ 1991.069072]
               -> #0 (&gsc->lock){+.+.}:
[ 1991.074193]        lock_acquire+0x6c/0x88
[ 1991.078179]        __mutex_lock+0x68/0xa34
[ 1991.082247]        mutex_lock_interruptible_nested+0x1c/0x24
[ 1991.087888]        gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.093029]        v4l2_mmap+0x54/0x88 [videodev]
[ 1991.097673]        mmap_region+0x3a8/0x638
[ 1991.101743]        do_mmap+0x330/0x3a4
[ 1991.105470]        vm_mmap_pgoff+0x90/0xb8
[ 1991.109542]        SyS_mmap_pgoff+0x90/0xc0
[ 1991.113702]        ret_fast_syscall+0x0/0x28
[ 1991.117945]
               other info that might help us debug this:

[ 1991.125918]  Possible unsafe locking scenario:

[ 1991.131810]        CPU0                    CPU1
[ 1991.136315]        ----                    ----
[ 1991.140821]   lock(&mm->mmap_sem);
[ 1991.144201]                                lock(&gsc->lock);
[ 1991.149833]                                lock(&mm->mmap_sem);
[ 1991.155725]   lock(&gsc->lock);
[ 1991.158845]
                *** DEADLOCK ***

[ 1991.164740] 1 lock held by qtdemux0:sink/2765:
[ 1991.169157]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.176609]
               stack backtrace:
[ 1991.180946] CPU: 2 PID: 2765 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 1991.189608] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 1991.195686] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 1991.203393] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 1991.210586] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 1991.218644] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 1991.227049] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 1991.235281] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 1991.242993] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 1991.250620] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 1991.259812] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf1729f0>] (gsc_m2m_mmap+0x24/0x5c [exynos_gsc])
[ 1991.270159] [<bf1729f0>] (gsc_m2m_mmap [exynos_gsc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 1991.279510] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 1991.287792] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 1991.294986] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 1991.302178] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 1991.309977] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Oct 29, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 2106.181412] ======================================================
[ 2106.187563] WARNING: possible circular locking dependency detected
[ 2106.193718] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 2106.199175] ------------------------------------------------------
[ 2106.205328] qtdemux0:sink/2614 is trying to acquire lock:
[ 2106.210701]  (&dev->mfc_mutex){+.+.}, at: [<bf175544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.218672]
[ 2106.218672] but task is already holding lock:
[ 2106.224477]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.231497]
[ 2106.231497] which lock already depends on the new lock.
[ 2106.231497]
[ 2106.239642]
[ 2106.239642] the existing dependency chain (in reverse order) is:
[ 2106.247095]
[ 2106.247095] -> #1 (&mm->mmap_sem){++++}:
[ 2106.252473]        __might_fault+0x80/0xb0
[ 2106.256567]        video_usercopy+0x1cc/0x510 [videodev]
[ 2106.261845]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 2106.266596]        do_vfs_ioctl+0xa0/0xa18
[ 2106.270667]        SyS_ioctl+0x34/0x5c
[ 2106.274395]        ret_fast_syscall+0x0/0x28
[ 2106.278637]
[ 2106.278637] -> #0 (&dev->mfc_mutex){+.+.}:
[ 2106.284186]        lock_acquire+0x6c/0x88
[ 2106.288173]        __mutex_lock+0x68/0xa34
[ 2106.292244]        mutex_lock_interruptible_nested+0x1c/0x24
[ 2106.297893]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.302747]        v4l2_mmap+0x54/0x88 [videodev]
[ 2106.307409]        mmap_region+0x3a8/0x638
[ 2106.311480]        do_mmap+0x330/0x3a4
[ 2106.315207]        vm_mmap_pgoff+0x90/0xb8
[ 2106.319279]        SyS_mmap_pgoff+0x90/0xc0
[ 2106.323439]        ret_fast_syscall+0x0/0x28
[ 2106.327683]
[ 2106.327683] other info that might help us debug this:
[ 2106.327683]
[ 2106.335656]  Possible unsafe locking scenario:
[ 2106.335656]
[ 2106.341548]        CPU0                    CPU1
[ 2106.346053]        ----                    ----
[ 2106.350559]   lock(&mm->mmap_sem);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.365897]   lock(&dev->mfc_mutex);
[ 2106.369450]
[ 2106.369450]  *** DEADLOCK ***
[ 2106.369450]
[ 2106.375344] 1 lock held by qtdemux0:sink/2614:
[ 2106.379762]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.387214]
[ 2106.387214] stack backtrace:
[ 2106.391550] CPU: 7 PID: 2614 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 2106.400213] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 2106.406285] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 2106.413995] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 2106.421187] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 2106.429245] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 2106.437651] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 2106.445883] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 2106.453596] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 2106.461221] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 2106.470425] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf175544>] (s5p_mfc_mmap+0x28/0xd4 [s5p_mfc])
[ 2106.480494] [<bf175544>] (s5p_mfc_mmap [s5p_mfc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 2106.489575] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 2106.497875] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 2106.505068] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 2106.512260] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 2106.520059] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Nov 1, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 2106.181412] ======================================================
[ 2106.187563] WARNING: possible circular locking dependency detected
[ 2106.193718] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 2106.199175] ------------------------------------------------------
[ 2106.205328] qtdemux0:sink/2614 is trying to acquire lock:
[ 2106.210701]  (&dev->mfc_mutex){+.+.}, at: [<bf175544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.218672]
[ 2106.218672] but task is already holding lock:
[ 2106.224477]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.231497]
[ 2106.231497] which lock already depends on the new lock.
[ 2106.231497]
[ 2106.239642]
[ 2106.239642] the existing dependency chain (in reverse order) is:
[ 2106.247095]
[ 2106.247095] -> #1 (&mm->mmap_sem){++++}:
[ 2106.252473]        __might_fault+0x80/0xb0
[ 2106.256567]        video_usercopy+0x1cc/0x510 [videodev]
[ 2106.261845]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 2106.266596]        do_vfs_ioctl+0xa0/0xa18
[ 2106.270667]        SyS_ioctl+0x34/0x5c
[ 2106.274395]        ret_fast_syscall+0x0/0x28
[ 2106.278637]
[ 2106.278637] -> #0 (&dev->mfc_mutex){+.+.}:
[ 2106.284186]        lock_acquire+0x6c/0x88
[ 2106.288173]        __mutex_lock+0x68/0xa34
[ 2106.292244]        mutex_lock_interruptible_nested+0x1c/0x24
[ 2106.297893]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.302747]        v4l2_mmap+0x54/0x88 [videodev]
[ 2106.307409]        mmap_region+0x3a8/0x638
[ 2106.311480]        do_mmap+0x330/0x3a4
[ 2106.315207]        vm_mmap_pgoff+0x90/0xb8
[ 2106.319279]        SyS_mmap_pgoff+0x90/0xc0
[ 2106.323439]        ret_fast_syscall+0x0/0x28
[ 2106.327683]
[ 2106.327683] other info that might help us debug this:
[ 2106.327683]
[ 2106.335656]  Possible unsafe locking scenario:
[ 2106.335656]
[ 2106.341548]        CPU0                    CPU1
[ 2106.346053]        ----                    ----
[ 2106.350559]   lock(&mm->mmap_sem);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.365897]   lock(&dev->mfc_mutex);
[ 2106.369450]
[ 2106.369450]  *** DEADLOCK ***
[ 2106.369450]
[ 2106.375344] 1 lock held by qtdemux0:sink/2614:
[ 2106.379762]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.387214]
[ 2106.387214] stack backtrace:
[ 2106.391550] CPU: 7 PID: 2614 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 2106.400213] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 2106.406285] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 2106.413995] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 2106.421187] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 2106.429245] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 2106.437651] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 2106.445883] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 2106.453596] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 2106.461221] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 2106.470425] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf175544>] (s5p_mfc_mmap+0x28/0xd4 [s5p_mfc])
[ 2106.480494] [<bf175544>] (s5p_mfc_mmap [s5p_mfc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 2106.489575] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 2106.497875] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 2106.505068] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 2106.512260] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 2106.520059] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Nov 1, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 1990.972058] ======================================================
[ 1990.978172] WARNING: possible circular locking dependency detected
[ 1990.984327] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 1990.989783] ------------------------------------------------------
[ 1990.995937] qtdemux0:sink/2765 is trying to acquire lock:
[ 1991.001309]  (&gsc->lock){+.+.}, at: [<bf1729f0>] gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.009108]
               but task is already holding lock:
[ 1991.014913]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.021932]
               which lock already depends on the new lock.

[ 1991.030078]
               the existing dependency chain (in reverse order) is:
[ 1991.037530]
               -> #1 (&mm->mmap_sem){++++}:
[ 1991.042913]        __might_fault+0x80/0xb0
[ 1991.047096]        video_usercopy+0x1cc/0x510 [videodev]
[ 1991.052297]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 1991.057036]        do_vfs_ioctl+0xa0/0xa18
[ 1991.061102]        SyS_ioctl+0x34/0x5c
[ 1991.064834]        ret_fast_syscall+0x0/0x28
[ 1991.069072]
               -> #0 (&gsc->lock){+.+.}:
[ 1991.074193]        lock_acquire+0x6c/0x88
[ 1991.078179]        __mutex_lock+0x68/0xa34
[ 1991.082247]        mutex_lock_interruptible_nested+0x1c/0x24
[ 1991.087888]        gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.093029]        v4l2_mmap+0x54/0x88 [videodev]
[ 1991.097673]        mmap_region+0x3a8/0x638
[ 1991.101743]        do_mmap+0x330/0x3a4
[ 1991.105470]        vm_mmap_pgoff+0x90/0xb8
[ 1991.109542]        SyS_mmap_pgoff+0x90/0xc0
[ 1991.113702]        ret_fast_syscall+0x0/0x28
[ 1991.117945]
               other info that might help us debug this:

[ 1991.125918]  Possible unsafe locking scenario:

[ 1991.131810]        CPU0                    CPU1
[ 1991.136315]        ----                    ----
[ 1991.140821]   lock(&mm->mmap_sem);
[ 1991.144201]                                lock(&gsc->lock);
[ 1991.149833]                                lock(&mm->mmap_sem);
[ 1991.155725]   lock(&gsc->lock);
[ 1991.158845]
                *** DEADLOCK ***

[ 1991.164740] 1 lock held by qtdemux0:sink/2765:
[ 1991.169157]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.176609]
               stack backtrace:
[ 1991.180946] CPU: 2 PID: 2765 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 1991.189608] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 1991.195686] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 1991.203393] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 1991.210586] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 1991.218644] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 1991.227049] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 1991.235281] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 1991.242993] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 1991.250620] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 1991.259812] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf1729f0>] (gsc_m2m_mmap+0x24/0x5c [exynos_gsc])
[ 1991.270159] [<bf1729f0>] (gsc_m2m_mmap [exynos_gsc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 1991.279510] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 1991.287792] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 1991.294986] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 1991.302178] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 1991.309977] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Nov 6, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 2106.181412] ======================================================
[ 2106.187563] WARNING: possible circular locking dependency detected
[ 2106.193718] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 2106.199175] ------------------------------------------------------
[ 2106.205328] qtdemux0:sink/2614 is trying to acquire lock:
[ 2106.210701]  (&dev->mfc_mutex){+.+.}, at: [<bf175544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.218672]
[ 2106.218672] but task is already holding lock:
[ 2106.224477]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.231497]
[ 2106.231497] which lock already depends on the new lock.
[ 2106.231497]
[ 2106.239642]
[ 2106.239642] the existing dependency chain (in reverse order) is:
[ 2106.247095]
[ 2106.247095] -> #1 (&mm->mmap_sem){++++}:
[ 2106.252473]        __might_fault+0x80/0xb0
[ 2106.256567]        video_usercopy+0x1cc/0x510 [videodev]
[ 2106.261845]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 2106.266596]        do_vfs_ioctl+0xa0/0xa18
[ 2106.270667]        SyS_ioctl+0x34/0x5c
[ 2106.274395]        ret_fast_syscall+0x0/0x28
[ 2106.278637]
[ 2106.278637] -> #0 (&dev->mfc_mutex){+.+.}:
[ 2106.284186]        lock_acquire+0x6c/0x88
[ 2106.288173]        __mutex_lock+0x68/0xa34
[ 2106.292244]        mutex_lock_interruptible_nested+0x1c/0x24
[ 2106.297893]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.302747]        v4l2_mmap+0x54/0x88 [videodev]
[ 2106.307409]        mmap_region+0x3a8/0x638
[ 2106.311480]        do_mmap+0x330/0x3a4
[ 2106.315207]        vm_mmap_pgoff+0x90/0xb8
[ 2106.319279]        SyS_mmap_pgoff+0x90/0xc0
[ 2106.323439]        ret_fast_syscall+0x0/0x28
[ 2106.327683]
[ 2106.327683] other info that might help us debug this:
[ 2106.327683]
[ 2106.335656]  Possible unsafe locking scenario:
[ 2106.335656]
[ 2106.341548]        CPU0                    CPU1
[ 2106.346053]        ----                    ----
[ 2106.350559]   lock(&mm->mmap_sem);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.365897]   lock(&dev->mfc_mutex);
[ 2106.369450]
[ 2106.369450]  *** DEADLOCK ***
[ 2106.369450]
[ 2106.375344] 1 lock held by qtdemux0:sink/2614:
[ 2106.379762]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.387214]
[ 2106.387214] stack backtrace:
[ 2106.391550] CPU: 7 PID: 2614 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 2106.400213] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 2106.406285] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 2106.413995] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 2106.421187] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 2106.429245] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 2106.437651] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 2106.445883] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 2106.453596] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 2106.461221] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 2106.470425] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf175544>] (s5p_mfc_mmap+0x28/0xd4 [s5p_mfc])
[ 2106.480494] [<bf175544>] (s5p_mfc_mmap [s5p_mfc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 2106.489575] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 2106.497875] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 2106.505068] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 2106.512260] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 2106.520059] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Nov 6, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 1990.972058] ======================================================
[ 1990.978172] WARNING: possible circular locking dependency detected
[ 1990.984327] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 1990.989783] ------------------------------------------------------
[ 1990.995937] qtdemux0:sink/2765 is trying to acquire lock:
[ 1991.001309]  (&gsc->lock){+.+.}, at: [<bf1729f0>] gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.009108]
               but task is already holding lock:
[ 1991.014913]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.021932]
               which lock already depends on the new lock.

[ 1991.030078]
               the existing dependency chain (in reverse order) is:
[ 1991.037530]
               -> #1 (&mm->mmap_sem){++++}:
[ 1991.042913]        __might_fault+0x80/0xb0
[ 1991.047096]        video_usercopy+0x1cc/0x510 [videodev]
[ 1991.052297]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 1991.057036]        do_vfs_ioctl+0xa0/0xa18
[ 1991.061102]        SyS_ioctl+0x34/0x5c
[ 1991.064834]        ret_fast_syscall+0x0/0x28
[ 1991.069072]
               -> #0 (&gsc->lock){+.+.}:
[ 1991.074193]        lock_acquire+0x6c/0x88
[ 1991.078179]        __mutex_lock+0x68/0xa34
[ 1991.082247]        mutex_lock_interruptible_nested+0x1c/0x24
[ 1991.087888]        gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.093029]        v4l2_mmap+0x54/0x88 [videodev]
[ 1991.097673]        mmap_region+0x3a8/0x638
[ 1991.101743]        do_mmap+0x330/0x3a4
[ 1991.105470]        vm_mmap_pgoff+0x90/0xb8
[ 1991.109542]        SyS_mmap_pgoff+0x90/0xc0
[ 1991.113702]        ret_fast_syscall+0x0/0x28
[ 1991.117945]
               other info that might help us debug this:

[ 1991.125918]  Possible unsafe locking scenario:

[ 1991.131810]        CPU0                    CPU1
[ 1991.136315]        ----                    ----
[ 1991.140821]   lock(&mm->mmap_sem);
[ 1991.144201]                                lock(&gsc->lock);
[ 1991.149833]                                lock(&mm->mmap_sem);
[ 1991.155725]   lock(&gsc->lock);
[ 1991.158845]
                *** DEADLOCK ***

[ 1991.164740] 1 lock held by qtdemux0:sink/2765:
[ 1991.169157]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.176609]
               stack backtrace:
[ 1991.180946] CPU: 2 PID: 2765 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 1991.189608] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 1991.195686] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 1991.203393] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 1991.210586] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 1991.218644] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 1991.227049] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 1991.235281] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 1991.242993] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 1991.250620] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 1991.259812] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf1729f0>] (gsc_m2m_mmap+0x24/0x5c [exynos_gsc])
[ 1991.270159] [<bf1729f0>] (gsc_m2m_mmap [exynos_gsc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 1991.279510] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 1991.287792] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 1991.294986] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 1991.302178] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 1991.309977] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Nov 12, 2017
The warning below says it all:

  BUG: using __this_cpu_read() in preemptible [00000000] code: swapper/0/1
  caller is __this_cpu_preempt_check
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #4
  Call Trace:
   dump_stack
   check_preemption_disabled
   ? do_early_param
   __this_cpu_preempt_check
   arch_perfmon_init
   op_nmi_init
   ? alloc_pci_root_info
   oprofile_arch_init
   oprofile_init
   do_one_initcall
   ...

These accessors should not have been used in the first place: it is PPro so
no mixed silicon revisions and thus it can simply use boot_cpu_data.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Fix-creation-mandated-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Robert Richter <rric@kernel.org>
Cc: x86@kernel.org
Cc: stable@vger.kernel.org
tobetter pushed a commit that referenced this pull request Nov 12, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 2106.181412] ======================================================
[ 2106.187563] WARNING: possible circular locking dependency detected
[ 2106.193718] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 2106.199175] ------------------------------------------------------
[ 2106.205328] qtdemux0:sink/2614 is trying to acquire lock:
[ 2106.210701]  (&dev->mfc_mutex){+.+.}, at: [<bf175544>] s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.218672]
[ 2106.218672] but task is already holding lock:
[ 2106.224477]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.231497]
[ 2106.231497] which lock already depends on the new lock.
[ 2106.231497]
[ 2106.239642]
[ 2106.239642] the existing dependency chain (in reverse order) is:
[ 2106.247095]
[ 2106.247095] -> #1 (&mm->mmap_sem){++++}:
[ 2106.252473]        __might_fault+0x80/0xb0
[ 2106.256567]        video_usercopy+0x1cc/0x510 [videodev]
[ 2106.261845]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 2106.266596]        do_vfs_ioctl+0xa0/0xa18
[ 2106.270667]        SyS_ioctl+0x34/0x5c
[ 2106.274395]        ret_fast_syscall+0x0/0x28
[ 2106.278637]
[ 2106.278637] -> #0 (&dev->mfc_mutex){+.+.}:
[ 2106.284186]        lock_acquire+0x6c/0x88
[ 2106.288173]        __mutex_lock+0x68/0xa34
[ 2106.292244]        mutex_lock_interruptible_nested+0x1c/0x24
[ 2106.297893]        s5p_mfc_mmap+0x28/0xd4 [s5p_mfc]
[ 2106.302747]        v4l2_mmap+0x54/0x88 [videodev]
[ 2106.307409]        mmap_region+0x3a8/0x638
[ 2106.311480]        do_mmap+0x330/0x3a4
[ 2106.315207]        vm_mmap_pgoff+0x90/0xb8
[ 2106.319279]        SyS_mmap_pgoff+0x90/0xc0
[ 2106.323439]        ret_fast_syscall+0x0/0x28
[ 2106.327683]
[ 2106.327683] other info that might help us debug this:
[ 2106.327683]
[ 2106.335656]  Possible unsafe locking scenario:
[ 2106.335656]
[ 2106.341548]        CPU0                    CPU1
[ 2106.346053]        ----                    ----
[ 2106.350559]   lock(&mm->mmap_sem);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.353939]                                lock(&dev->mfc_mutex);
[ 2106.365897]   lock(&dev->mfc_mutex);
[ 2106.369450]
[ 2106.369450]  *** DEADLOCK ***
[ 2106.369450]
[ 2106.375344] 1 lock held by qtdemux0:sink/2614:
[ 2106.379762]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 2106.387214]
[ 2106.387214] stack backtrace:
[ 2106.391550] CPU: 7 PID: 2614 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 2106.400213] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 2106.406285] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 2106.413995] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 2106.421187] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 2106.429245] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 2106.437651] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 2106.445883] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 2106.453596] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 2106.461221] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 2106.470425] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf175544>] (s5p_mfc_mmap+0x28/0xd4 [s5p_mfc])
[ 2106.480494] [<bf175544>] (s5p_mfc_mmap [s5p_mfc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 2106.489575] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 2106.497875] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 2106.505068] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 2106.512260] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 2106.520059] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Nov 12, 2017
The driver mmap functions shouldn't take lock when calling vb2_mmap().
Fix it to not take the lock. The following lockdep warning is fixed
with this change.

[ 1990.972058] ======================================================
[ 1990.978172] WARNING: possible circular locking dependency detected
[ 1990.984327] 4.14.0-rc2-00002-gfab205f-dirty #4 Not tainted
[ 1990.989783] ------------------------------------------------------
[ 1990.995937] qtdemux0:sink/2765 is trying to acquire lock:
[ 1991.001309]  (&gsc->lock){+.+.}, at: [<bf1729f0>] gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.009108]
               but task is already holding lock:
[ 1991.014913]  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.021932]
               which lock already depends on the new lock.

[ 1991.030078]
               the existing dependency chain (in reverse order) is:
[ 1991.037530]
               -> #1 (&mm->mmap_sem){++++}:
[ 1991.042913]        __might_fault+0x80/0xb0
[ 1991.047096]        video_usercopy+0x1cc/0x510 [videodev]
[ 1991.052297]        v4l2_ioctl+0xa4/0xdc [videodev]
[ 1991.057036]        do_vfs_ioctl+0xa0/0xa18
[ 1991.061102]        SyS_ioctl+0x34/0x5c
[ 1991.064834]        ret_fast_syscall+0x0/0x28
[ 1991.069072]
               -> #0 (&gsc->lock){+.+.}:
[ 1991.074193]        lock_acquire+0x6c/0x88
[ 1991.078179]        __mutex_lock+0x68/0xa34
[ 1991.082247]        mutex_lock_interruptible_nested+0x1c/0x24
[ 1991.087888]        gsc_m2m_mmap+0x24/0x5c [exynos_gsc]
[ 1991.093029]        v4l2_mmap+0x54/0x88 [videodev]
[ 1991.097673]        mmap_region+0x3a8/0x638
[ 1991.101743]        do_mmap+0x330/0x3a4
[ 1991.105470]        vm_mmap_pgoff+0x90/0xb8
[ 1991.109542]        SyS_mmap_pgoff+0x90/0xc0
[ 1991.113702]        ret_fast_syscall+0x0/0x28
[ 1991.117945]
               other info that might help us debug this:

[ 1991.125918]  Possible unsafe locking scenario:

[ 1991.131810]        CPU0                    CPU1
[ 1991.136315]        ----                    ----
[ 1991.140821]   lock(&mm->mmap_sem);
[ 1991.144201]                                lock(&gsc->lock);
[ 1991.149833]                                lock(&mm->mmap_sem);
[ 1991.155725]   lock(&gsc->lock);
[ 1991.158845]
                *** DEADLOCK ***

[ 1991.164740] 1 lock held by qtdemux0:sink/2765:
[ 1991.169157]  #0:  (&mm->mmap_sem){++++}, at: [<c01df2e4>] vm_mmap_pgoff+0x44/0xb8
[ 1991.176609]
               stack backtrace:
[ 1991.180946] CPU: 2 PID: 2765 Comm: qtdemux0:sink Not tainted 4.14.0-rc2-00002-gfab205f-dirty #4
[ 1991.189608] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 1991.195686] [<c01102c8>] (unwind_backtrace) from [<c010cabc>] (show_stack+0x10/0x14)
[ 1991.203393] [<c010cabc>] (show_stack) from [<c08543a4>] (dump_stack+0x98/0xc4)
[ 1991.210586] [<c08543a4>] (dump_stack) from [<c016b2fc>] (print_circular_bug+0x254/0x410)
[ 1991.218644] [<c016b2fc>] (print_circular_bug) from [<c016c580>] (check_prev_add+0x468/0x938)
[ 1991.227049] [<c016c580>] (check_prev_add) from [<c016f4dc>] (__lock_acquire+0x1314/0x14fc)
[ 1991.235281] [<c016f4dc>] (__lock_acquire) from [<c016fefc>] (lock_acquire+0x6c/0x88)
[ 1991.242993] [<c016fefc>] (lock_acquire) from [<c0869fb4>] (__mutex_lock+0x68/0xa34)
[ 1991.250620] [<c0869fb4>] (__mutex_lock) from [<c086aa08>] (mutex_lock_interruptible_nested+0x1c/0x24)
[ 1991.259812] [<c086aa08>] (mutex_lock_interruptible_nested) from [<bf1729f0>] (gsc_m2m_mmap+0x24/0x5c [exynos_gsc])
[ 1991.270159] [<bf1729f0>] (gsc_m2m_mmap [exynos_gsc]) from [<bf037120>] (v4l2_mmap+0x54/0x88 [videodev])
[ 1991.279510] [<bf037120>] (v4l2_mmap [videodev]) from [<c01f4798>] (mmap_region+0x3a8/0x638)
[ 1991.287792] [<c01f4798>] (mmap_region) from [<c01f4d58>] (do_mmap+0x330/0x3a4)
[ 1991.294986] [<c01f4d58>] (do_mmap) from [<c01df330>] (vm_mmap_pgoff+0x90/0xb8)
[ 1991.302178] [<c01df330>] (vm_mmap_pgoff) from [<c01f28cc>] (SyS_mmap_pgoff+0x90/0xc0)
[ 1991.309977] [<c01f28cc>] (SyS_mmap_pgoff) from [<c0108820>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: memeka <mihailescu2m@gmail.com>
tobetter pushed a commit that referenced this pull request Dec 23, 2017
[ Upstream commit 87943db ]

Sai reported a warning during some MBA tests:

[  236.755559] ======================================================
[  236.762443] WARNING: possible circular locking dependency detected
[  236.769328] 4.14.0-rc4-yocto-standard #8 Not tainted
[  236.774857] ------------------------------------------------------
[  236.781738] mount/10091 is trying to acquire lock:
[  236.787071]  (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8117f892>] static_key_enable+0x12/0x30
[  236.797058]
               but task is already holding lock:
[  236.803552]  (&type->s_umount_key#37/1){+.+.}, at: [<ffffffff81208b2f>] sget_userns+0x32f/0x520
[  236.813247]
               which lock already depends on the new lock.

[  236.822353]
               the existing dependency chain (in reverse order) is:
[  236.830686]
               -> #4 (&type->s_umount_key#37/1){+.+.}:
[  236.837756]        __lock_acquire+0x1100/0x11a0
[  236.842799]        lock_acquire+0xdf/0x1d0
[  236.847363]        down_write_nested+0x46/0x80
[  236.852310]        sget_userns+0x32f/0x520
[  236.856873]        kernfs_mount_ns+0x7e/0x1f0
[  236.861728]        rdt_mount+0x30c/0x440
[  236.866096]        mount_fs+0x38/0x150
[  236.870262]        vfs_kern_mount+0x67/0x150
[  236.875015]        do_mount+0x1df/0xd50
[  236.879286]        SyS_mount+0x95/0xe0
[  236.883464]        entry_SYSCALL_64_fastpath+0x18/0xad
[  236.889183]
               -> #3 (rdtgroup_mutex){+.+.}:
[  236.895292]        __lock_acquire+0x1100/0x11a0
[  236.900337]        lock_acquire+0xdf/0x1d0
[  236.904899]        __mutex_lock+0x80/0x8f0
[  236.909459]        mutex_lock_nested+0x1b/0x20
[  236.914407]        intel_rdt_online_cpu+0x3b/0x4a0
[  236.919745]        cpuhp_invoke_callback+0xce/0xb80
[  236.925177]        cpuhp_thread_fun+0x1c5/0x230
[  236.930222]        smpboot_thread_fn+0x11a/0x1e0
[  236.935362]        kthread+0x152/0x190
[  236.939536]        ret_from_fork+0x27/0x40
[  236.944097]
               -> #2 (cpuhp_state-up){+.+.}:
[  236.950199]        __lock_acquire+0x1100/0x11a0
[  236.955241]        lock_acquire+0xdf/0x1d0
[  236.959800]        cpuhp_issue_call+0x12e/0x1c0
[  236.964845]        __cpuhp_setup_state_cpuslocked+0x13b/0x2f0
[  236.971242]        __cpuhp_setup_state+0xa7/0x120
[  236.976483]        page_writeback_init+0x43/0x67
[  236.981623]        pagecache_init+0x38/0x3b
[  236.986281]        start_kernel+0x3c6/0x41a
[  236.990931]        x86_64_start_reservations+0x2a/0x2c
[  236.996650]        x86_64_start_kernel+0x72/0x75
[  237.001793]        verify_cpu+0x0/0xfb
[  237.005966]
               -> #1 (cpuhp_state_mutex){+.+.}:
[  237.012364]        __lock_acquire+0x1100/0x11a0
[  237.017408]        lock_acquire+0xdf/0x1d0
[  237.021969]        __mutex_lock+0x80/0x8f0
[  237.026527]        mutex_lock_nested+0x1b/0x20
[  237.031475]        __cpuhp_setup_state_cpuslocked+0x54/0x2f0
[  237.037777]        __cpuhp_setup_state+0xa7/0x120
[  237.043013]        page_alloc_init+0x28/0x30
[  237.047769]        start_kernel+0x148/0x41a
[  237.052425]        x86_64_start_reservations+0x2a/0x2c
[  237.058145]        x86_64_start_kernel+0x72/0x75
[  237.063284]        verify_cpu+0x0/0xfb
[  237.067456]
               -> #0 (cpu_hotplug_lock.rw_sem){++++}:
[  237.074436]        check_prev_add+0x401/0x800
[  237.079286]        __lock_acquire+0x1100/0x11a0
[  237.084330]        lock_acquire+0xdf/0x1d0
[  237.088890]        cpus_read_lock+0x42/0x90
[  237.093548]        static_key_enable+0x12/0x30
[  237.098496]        rdt_mount+0x406/0x440
[  237.102862]        mount_fs+0x38/0x150
[  237.107035]        vfs_kern_mount+0x67/0x150
[  237.111787]        do_mount+0x1df/0xd50
[  237.116058]        SyS_mount+0x95/0xe0
[  237.120233]        entry_SYSCALL_64_fastpath+0x18/0xad
[  237.125952]
               other info that might help us debug this:

[  237.134867] Chain exists of:
                 cpu_hotplug_lock.rw_sem --> rdtgroup_mutex --> &type->s_umount_key#37/1

[  237.148425]  Possible unsafe locking scenario:

[  237.155015]        CPU0                    CPU1
[  237.160057]        ----                    ----
[  237.165100]   lock(&type->s_umount_key#37/1);
[  237.169952]                                lock(rdtgroup_mutex);
[  237.176641]
lock(&type->s_umount_key#37/1);
[  237.184287]   lock(cpu_hotplug_lock.rw_sem);
[  237.189041]
                *** DEADLOCK ***

When the resctrl filesystem is mounted the locks must be acquired in the
same order as was done when the cpus came online:

     cpu_hotplug_lock before rdtgroup_mutex.

This also requires to switch the static_branch_enable() calls to the
_cpulocked variant because now cpu hotplug lock is held already.

[ tglx: Switched to cpus_read_[un]lock ]

Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Acked-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Link: https://lkml.kernel.org/r/9c41b91bc2f47d9e95b62b213ecdb45623c47a9f.1508490116.git.reinette.chatre@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Dec 23, 2017
[ Upstream commit 962cc1a ]

In commit f2e9ad2 ("xfs: check for race with xfs_reclaim_inode"), we
skip an inode if we're racing with freeing the inode via
xfs_reclaim_inode, but we forgot to release the rcu read lock when
dumping the inode, with the result that we exit to userspace with a lock
held.  Don't do that; generic/320 with a 1k block size fails this
very occasionally.

================================================
WARNING: lock held when returning to user space!
4.14.0-rc6-djwong #4 Tainted: G        W
------------------------------------------------
rm/30466 is leaving the kernel with locks still held!
1 lock held by rm/30466:
 #0:  (rcu_read_lock){....}, at: [<ffffffffa01364d3>] xfs_ifree_cluster.isra.17+0x2c3/0x6f0 [xfs]
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30466 at kernel/rcu/tree_plugin.h:329 rcu_note_context_switch+0x71/0x700
Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug]
CPU: 1 PID: 30466 Comm: rm Tainted: G        W       4.14.0-rc6-djwong #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1djwong0 04/01/2014
task: ffff880037680000 task.stack: ffffc90001064000
RIP: 0010:rcu_note_context_switch+0x71/0x700
RSP: 0000:ffffc90001067e50 EFLAGS: 00010002
RAX: 0000000000000001 RBX: ffff880037680000 RCX: ffff88003e73d200
RDX: 0000000000000002 RSI: ffffffff819e53e9 RDI: ffffffff819f4375
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff880062c900d0
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880037680000
R13: 0000000000000000 R14: ffffc90001067eb8 R15: ffff880037680690
FS:  00007fa3b8ce8700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f69bf77c000 CR3: 000000002450a000 CR4: 00000000000006e0
Call Trace:
 __schedule+0xb8/0xb10
 schedule+0x40/0x90
 exit_to_usermode_loop+0x6b/0xa0
 prepare_exit_to_usermode+0x7a/0x90
 retint_user+0x8/0x20
RIP: 0033:0x7fa3b87fda87
RSP: 002b:00007ffe41206568 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff02
RAX: 0000000000000000 RBX: 00000000010e88c0 RCX: 00007fa3b87fda87
RDX: 0000000000000000 RSI: 00000000010e89c8 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000
R10: 000000000000015e R11: 0000000000000246 R12: 00000000010c8060
R13: 00007ffe41206690 R14: 0000000000000000 R15: 0000000000000000
---[ end trace e88f83bf0cfbd07d ]---

Fixes: f2e9ad2
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Jan 4, 2018
clk_change_rate() propagates rate change down to all its children. Such
operation requires managing proper runtime PM state of each child, what
was missing. Add needed calls to clk_pm_runtime*() to ensure that
set_rate() clock callback is called on runtime active clock.

This fixes following issue found on Exynos5433 TM2 board with devfreq
enabled:

Synchronous External Abort: synchronous external abort (0x96000210) at 0xffffff80093f5600
Internal error: : 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5 Comm: kworker/u16:0 Not tainted 4.15.0-rc1-next-20171129+ #4
Hardware name: Samsung TM2 board (DT)
Workqueue: devfreq_wq devfreq_monitor
task: ffffffc0ca96b600 task.stack: ffffff80093a8000
pstate: a0000085 (NzCv daIf -PAN -UAO)
pc : clk_divider_set_rate+0x54/0x118
lr : clk_divider_set_rate+0x44/0x118
...
Process kworker/u16:0 (pid: 5, stack limit = 0xffffff80093a8000)
Call trace:
 clk_divider_set_rate+0x54/0x118
 clk_change_rate+0xfc/0x4e0
 clk_change_rate+0x1f0/0x4e0
 clk_change_rate+0x1f0/0x4e0
 clk_change_rate+0x1f0/0x4e0
 clk_core_set_rate_nolock+0x138/0x148
 clk_set_rate+0x28/0x50
 exynos_bus_passive_target+0x6c/0x11c
 update_devfreq_passive+0x58/0xb4
 devfreq_passive_notifier_call+0x50/0x5c
 notifier_call_chain+0x4c/0x88
 __srcu_notifier_call_chain+0x54/0x80
 srcu_notifier_call_chain+0x14/0x1c
 update_devfreq+0x100/0x1b4
 devfreq_monitor+0x2c/0x88
 process_one_work+0x148/0x3d8
 worker_thread+0x13c/0x3f8
 kthread+0x100/0x12c
 ret_from_fork+0x10/0x18

Reported-by: Chanwoo Choi <cw00.choi@samsung.com>
Fixes: 9a34b45 ("clk: Add support for runtime PM")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
commit 2ccd42b upstream.

If we finds a vq without a name in our input array in
virtio_ccw_find_vqs(), we treat it as "non-existing" and set the vq pointer
to NULL; we will not call virtio_ccw_setup_vq() to allocate/setup a vq.

Consequently, we create only a queue if it actually exists (name != NULL)
and assign an incremental queue index to each such existing queue.

However, in virtio_ccw_register_adapter_ind()->get_airq_indicator() we
will not ignore these "non-existing queues", but instead assign an airq
indicator to them.

Besides never releasing them in virtio_ccw_drop_indicators() (because
there is no virtqueue), the bigger issue seems to be that there will be a
disagreement between the device and the Linux guest about the airq
indicator to be used for notifying a queue, because the indicator bit
for adapter I/O interrupt is derived from the queue index.

The virtio spec states under "Setting Up Two-Stage Queue Indicators":

	... indicator contains the guest address of an area wherein the
	indicators for the devices are contained, starting at bit_nr, one
	bit per virtqueue of the device.

And further in "Notification via Adapter I/O Interrupts":

	For notifying the driver of virtqueue buffers, the device sets the
	bit in the guest-provided indicator area at the corresponding
	offset.

For example, QEMU uses in virtio_ccw_notify() the queue index (passed as
"vector") to select the relevant indicator bit. If a queue does not exist,
it does not have a corresponding indicator bit assigned, because it
effectively doesn't have a queue index.

Using a virtio-balloon-ccw device under QEMU with free-page-hinting
disabled ("free-page-hint=off") but free-page-reporting enabled
("free-page-reporting=on") will result in free page reporting
not working as expected: in the virtio_balloon driver, we'll be stuck
forever in virtballoon_free_page_report()->wait_event(), because the
waitqueue will not be woken up as the notification from the device is
lost: it would use the wrong indicator bit.

Free page reporting stops working and we get splats (when configured to
detect hung wqs) like:

 INFO: task kworker/1:3:463 blocked for more than 61 seconds.
       Not tainted 6.14.0 #4
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:kworker/1:3 [...]
 Workqueue: events page_reporting_process
 Call Trace:
  [<000002f404e6dfb2>] __schedule+0x402/0x1640
  [<000002f404e6f22e>] schedule+0x3e/0xe0
  [<000002f3846a88fa>] virtballoon_free_page_report+0xaa/0x110 [virtio_balloon]
  [<000002f40435c8a4>] page_reporting_process+0x2e4/0x740
  [<000002f403fd3ee2>] process_one_work+0x1c2/0x400
  [<000002f403fd4b96>] worker_thread+0x296/0x420
  [<000002f403fe10b4>] kthread+0x124/0x290
  [<000002f403f4e0dc>] __ret_from_fork+0x3c/0x60
  [<000002f404e77272>] ret_from_fork+0xa/0x38

There was recently a discussion [1] whether the "holes" should be
treated differently again, effectively assigning also non-existing
queues a queue index: that should also fix the issue, but requires other
workarounds to not break existing setups.

Let's fix it without affecting existing setups for now by properly ignoring
the non-existing queues, so the indicator bits will match the queue
indexes.

[1] https://lore.kernel.org/all/cover.1720611677.git.mst@redhat.com/

Fixes: a229989 ("virtio: don't allocate vqs when names[i] = NULL")
Reported-by: Chandra Merla <cmerla@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20250402203621.940090-1-david@redhat.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
commit 366e77c upstream.

Commit 7da55c2 ("drm/amd/display: Remove incorrect FP context
start") removes the FP context protection of dml2_create(), and it said
"All the DC_FP_START/END should be used before call anything from DML2".

However, dml2_validate()/dml21_validate() are not protected from their
callers, causing such errors:

 do_fpu invoked from kernel context![#1]:
 CPU: 10 UID: 0 PID: 331 Comm: kworker/10:1H Not tainted 6.14.0-rc6+ #4
 Workqueue: events_highpri dm_irq_work_func [amdgpu]
 pc ffff800003191eb0 ra ffff800003191e60 tp 9000000107a94000 sp 9000000107a975b0
 a0 9000000140ce4910 a1 0000000000000000 a2 9000000140ce49b0 a3 9000000140ce49a8
 a4 9000000140ce49a8 a5 0000000100000000 a6 0000000000000001 a7 9000000107a97660
 t0 ffff800003790000 t1 9000000140ce5000 t2 0000000000000001 t3 0000000000000000
 t4 0000000000000004 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000
 t8 0000000100000000 u0 ffff8000031a3b9c s9 9000000130bc0000 s0 9000000132400000
 s1 9000000140ec0000 s2 9000000132400000 s3 9000000140ce0000 s4 90000000057f8b88
 s5 9000000140ec0000 s6 9000000140ce4910 s7 0000000000000001 s8 9000000130d45010
 ra: ffff800003191e60 dml21_map_dc_state_into_dml_display_cfg+0x40/0x1140 [amdgpu]
   ERA: ffff800003191eb0 dml21_map_dc_state_into_dml_display_cfg+0x90/0x1140 [amdgpu]
  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
  PRMD: 00000004 (PPLV0 +PIE -PWE)
  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
  ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
 ESTAT: 000f0000 [FPD] (IS= ECode=15 EsubCode=0)
  PRID: 0014d010 (Loongson-64bit, Loongson-3C6000/S)
 Process kworker/10:1H (pid: 331, threadinfo=000000007bf9ddb0, task=00000000cc4ab9f3)
 Stack : 0000000100000000 0000043800000780 0000000100000001 0000000100000001
         0000000000000000 0000078000000000 0000000000000438 0000078000000000
         0000000000000438 0000078000000000 0000000000000438 0000000100000000
         0000000100000000 0000000100000000 0000000100000000 0000000100000000
         0000000000000001 9000000140ec0000 9000000132400000 9000000132400000
         ffff800003408000 ffff800003408000 9000000132400000 9000000140ce0000
         9000000140ce0000 ffff800003193850 0000000000000001 9000000140ec0000
         9000000132400000 9000000140ec0860 9000000140ec0738 0000000000000001
         90000001405e8000 9000000130bc0000 9000000140ec02a8 ffff8000031b5db8
         0000000000000000 0000043800000780 0000000000000003 ffff8000031b79cc
         ...
 Call Trace:
 [<ffff800003191eb0>] dml21_map_dc_state_into_dml_display_cfg+0x90/0x1140 [amdgpu]
 [<ffff80000319384c>] dml21_validate+0xcc/0x520 [amdgpu]
 [<ffff8000031b8948>] dc_validate_global_state+0x2e8/0x460 [amdgpu]
 [<ffff800002e94034>] create_validate_stream_for_sink+0x3d4/0x420 [amdgpu]
 [<ffff800002e940e4>] amdgpu_dm_connector_mode_valid+0x64/0x240 [amdgpu]
 [<900000000441d6b8>] drm_connector_mode_valid+0x38/0x80
 [<900000000441d824>] __drm_helper_update_and_validate+0x124/0x3e0
 [<900000000441ddc0>] drm_helper_probe_single_connector_modes+0x2e0/0x620
 [<90000000044050dc>] drm_client_modeset_probe+0x23c/0x1780
 [<9000000004420384>] __drm_fb_helper_initial_config_and_unlock+0x44/0x5a0
 [<9000000004403acc>] drm_client_dev_hotplug+0xcc/0x140
 [<ffff800002e9ab50>] handle_hpd_irq_helper+0x1b0/0x1e0 [amdgpu]
 [<90000000038f5da0>] process_one_work+0x160/0x300
 [<90000000038f6718>] worker_thread+0x318/0x440
 [<9000000003901b8c>] kthread+0x12c/0x220
 [<90000000038b1484>] ret_from_kernel_thread+0x8/0xa4

Unfortunately, protecting dml2_validate()/dml21_validate() out of DML2
causes "sleeping function called from invalid context", so protect them
with DC_FP_START() and DC_FP_END() inside.

Fixes: 7da55c2 ("drm/amd/display: Remove incorrect FP context start")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Dongyan Qian <qiandongyan@loongson.cn>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
[ Upstream commit 866bafa ]

There is a potential deadlock if we do report zones in an IO context, detailed
in below lockdep report. When one process do a report zones and another process
freezes the block device, the report zones side cannot allocate a tag because
the freeze is already started. This can thus result in new block group creation
to hang forever, blocking the write path.

Thankfully, a new block group should be created on empty zones. So, reporting
the zones is not necessary and we can set the write pointer = 0 and load the
zone capacity from the block layer using bdev_zone_capacity() helper.

 ======================================================
 WARNING: possible circular locking dependency detected
 6.14.0-rc1 torvalds#252 Not tainted
 ------------------------------------------------------
 modprobe/1110 is trying to acquire lock:
 ffff888100ac83e0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x38f/0xb60

 but task is already holding lock:
 ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #3 (&q->q_usage_counter(queue)#16){++++}-{0:0}:
        blk_queue_enter+0x3d9/0x500
        blk_mq_alloc_request+0x47d/0x8e0
        scsi_execute_cmd+0x14f/0xb80
        sd_zbc_do_report_zones+0x1c1/0x470
        sd_zbc_report_zones+0x362/0xd60
        blkdev_report_zones+0x1b1/0x2e0
        btrfs_get_dev_zones+0x215/0x7e0 [btrfs]
        btrfs_load_block_group_zone_info+0x6d2/0x2c10 [btrfs]
        btrfs_make_block_group+0x36b/0x870 [btrfs]
        btrfs_create_chunk+0x147d/0x2320 [btrfs]
        btrfs_chunk_alloc+0x2ce/0xcf0 [btrfs]
        start_transaction+0xce6/0x1620 [btrfs]
        btrfs_uuid_scan_kthread+0x4ee/0x5b0 [btrfs]
        kthread+0x39d/0x750
        ret_from_fork+0x30/0x70
        ret_from_fork_asm+0x1a/0x30

 -> #2 (&fs_info->dev_replace.rwsem){++++}-{4:4}:
        down_read+0x9b/0x470
        btrfs_map_block+0x2ce/0x2ce0 [btrfs]
        btrfs_submit_chunk+0x2d4/0x16c0 [btrfs]
        btrfs_submit_bbio+0x16/0x30 [btrfs]
        btree_write_cache_pages+0xb5a/0xf90 [btrfs]
        do_writepages+0x17f/0x7b0
        __writeback_single_inode+0x114/0xb00
        writeback_sb_inodes+0x52b/0xe00
        wb_writeback+0x1a7/0x800
        wb_workfn+0x12a/0xbd0
        process_one_work+0x85a/0x1460
        worker_thread+0x5e2/0xfc0
        kthread+0x39d/0x750
        ret_from_fork+0x30/0x70
        ret_from_fork_asm+0x1a/0x30

 -> #1 (&fs_info->zoned_meta_io_lock){+.+.}-{4:4}:
        __mutex_lock+0x1aa/0x1360
        btree_write_cache_pages+0x252/0xf90 [btrfs]
        do_writepages+0x17f/0x7b0
        __writeback_single_inode+0x114/0xb00
        writeback_sb_inodes+0x52b/0xe00
        wb_writeback+0x1a7/0x800
        wb_workfn+0x12a/0xbd0
        process_one_work+0x85a/0x1460
        worker_thread+0x5e2/0xfc0
        kthread+0x39d/0x750
        ret_from_fork+0x30/0x70
        ret_from_fork_asm+0x1a/0x30

 -> #0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}:
        __lock_acquire+0x2f52/0x5ea0
        lock_acquire+0x1b1/0x540
        __flush_work+0x3ac/0xb60
        wb_shutdown+0x15b/0x1f0
        bdi_unregister+0x172/0x5b0
        del_gendisk+0x841/0xa20
        sd_remove+0x85/0x130
        device_release_driver_internal+0x368/0x520
        bus_remove_device+0x1f1/0x3f0
        device_del+0x3bd/0x9c0
        __scsi_remove_device+0x272/0x340
        scsi_forget_host+0xf7/0x170
        scsi_remove_host+0xd2/0x2a0
        sdebug_driver_remove+0x52/0x2f0 [scsi_debug]
        device_release_driver_internal+0x368/0x520
        bus_remove_device+0x1f1/0x3f0
        device_del+0x3bd/0x9c0
        device_unregister+0x13/0xa0
        sdebug_do_remove_host+0x1fb/0x290 [scsi_debug]
        scsi_debug_exit+0x17/0x70 [scsi_debug]
        __do_sys_delete_module.isra.0+0x321/0x520
        do_syscall_64+0x93/0x180
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 other info that might help us debug this:

 Chain exists of:
   (work_completion)(&(&wb->dwork)->work) --> &fs_info->dev_replace.rwsem --> &q->q_usage_counter(queue)#16

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&q->q_usage_counter(queue)#16);
                                lock(&fs_info->dev_replace.rwsem);
                                lock(&q->q_usage_counter(queue)#16);
   lock((work_completion)(&(&wb->dwork)->work));

  *** DEADLOCK ***

 5 locks held by modprobe/1110:
  #0: ffff88811f7bc108 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520
  #1: ffff8881022ee0e0 (&shost->scan_mutex){+.+.}-{4:4}, at: scsi_remove_host+0x20/0x2a0
  #2: ffff88811b4c4378 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520
  #3: ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130
  #4: ffffffffa3284360 (rcu_read_lock){....}-{1:3}, at: __flush_work+0xda/0xb60

 stack backtrace:
 CPU: 0 UID: 0 PID: 1110 Comm: modprobe Not tainted 6.14.0-rc1 torvalds#252
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x6a/0x90
  print_circular_bug.cold+0x1e0/0x274
  check_noncircular+0x306/0x3f0
  ? __pfx_check_noncircular+0x10/0x10
  ? mark_lock+0xf5/0x1650
  ? __pfx_check_irq_usage+0x10/0x10
  ? lockdep_lock+0xca/0x1c0
  ? __pfx_lockdep_lock+0x10/0x10
  __lock_acquire+0x2f52/0x5ea0
  ? __pfx___lock_acquire+0x10/0x10
  ? __pfx_mark_lock+0x10/0x10
  lock_acquire+0x1b1/0x540
  ? __flush_work+0x38f/0xb60
  ? __pfx_lock_acquire+0x10/0x10
  ? __pfx_lock_release+0x10/0x10
  ? mark_held_locks+0x94/0xe0
  ? __flush_work+0x38f/0xb60
  __flush_work+0x3ac/0xb60
  ? __flush_work+0x38f/0xb60
  ? __pfx_mark_lock+0x10/0x10
  ? __pfx___flush_work+0x10/0x10
  ? __pfx_wq_barrier_func+0x10/0x10
  ? __pfx___might_resched+0x10/0x10
  ? mark_held_locks+0x94/0xe0
  wb_shutdown+0x15b/0x1f0
  bdi_unregister+0x172/0x5b0
  ? __pfx_bdi_unregister+0x10/0x10
  ? up_write+0x1ba/0x510
  del_gendisk+0x841/0xa20
  ? __pfx_del_gendisk+0x10/0x10
  ? _raw_spin_unlock_irqrestore+0x35/0x60
  ? __pm_runtime_resume+0x79/0x110
  sd_remove+0x85/0x130
  device_release_driver_internal+0x368/0x520
  ? kobject_put+0x5d/0x4a0
  bus_remove_device+0x1f1/0x3f0
  device_del+0x3bd/0x9c0
  ? __pfx_device_del+0x10/0x10
  __scsi_remove_device+0x272/0x340
  scsi_forget_host+0xf7/0x170
  scsi_remove_host+0xd2/0x2a0
  sdebug_driver_remove+0x52/0x2f0 [scsi_debug]
  ? kernfs_remove_by_name_ns+0xc0/0xf0
  device_release_driver_internal+0x368/0x520
  ? kobject_put+0x5d/0x4a0
  bus_remove_device+0x1f1/0x3f0
  device_del+0x3bd/0x9c0
  ? __pfx_device_del+0x10/0x10
  ? __pfx___mutex_unlock_slowpath+0x10/0x10
  device_unregister+0x13/0xa0
  sdebug_do_remove_host+0x1fb/0x290 [scsi_debug]
  scsi_debug_exit+0x17/0x70 [scsi_debug]
  __do_sys_delete_module.isra.0+0x321/0x520
  ? __pfx___do_sys_delete_module.isra.0+0x10/0x10
  ? __pfx_slab_free_after_rcu_debug+0x10/0x10
  ? kasan_save_stack+0x2c/0x50
  ? kasan_record_aux_stack+0xa3/0xb0
  ? __call_rcu_common.constprop.0+0xc4/0xfb0
  ? kmem_cache_free+0x3a0/0x590
  ? __x64_sys_close+0x78/0xd0
  do_syscall_64+0x93/0x180
  ? lock_is_held_type+0xd5/0x130
  ? __call_rcu_common.constprop.0+0x3c0/0xfb0
  ? lockdep_hardirqs_on+0x78/0x100
  ? __call_rcu_common.constprop.0+0x3c0/0xfb0
  ? __pfx___call_rcu_common.constprop.0+0x10/0x10
  ? kmem_cache_free+0x3a0/0x590
  ? lockdep_hardirqs_on_prepare+0x16d/0x400
  ? do_syscall_64+0x9f/0x180
  ? lockdep_hardirqs_on+0x78/0x100
  ? do_syscall_64+0x9f/0x180
  ? __pfx___x64_sys_openat+0x10/0x10
  ? lockdep_hardirqs_on_prepare+0x16d/0x400
  ? do_syscall_64+0x9f/0x180
  ? lockdep_hardirqs_on+0x78/0x100
  ? do_syscall_64+0x9f/0x180
  entry_SYSCALL_64_after_hwframe+0x76/0x7e
 RIP: 0033:0x7f436712b68b
 RSP: 002b:00007ffe9f1a8658 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
 RAX: ffffffffffffffda RBX: 00005559b367fd80 RCX: 00007f436712b68b
 RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005559b367fde8
 RBP: 00007ffe9f1a8680 R08: 1999999999999999 R09: 0000000000000000
 R10: 00007f43671a5fe0 R11: 0000000000000206 R12: 0000000000000000
 R13: 00007ffe9f1a86b0 R14: 0000000000000000 R15: 0000000000000000
  </TASK>

Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
CC: <stable@vger.kernel.org> # 6.13+
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
…cal section

[ Upstream commit 85b2b9c ]

A circular lock dependency splat has been seen involving down_trylock():

  ======================================================
  WARNING: possible circular locking dependency detected
  6.12.0-41.el10.s390x+debug
  ------------------------------------------------------
  dd/32479 is trying to acquire lock:
  0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90

  but task is already holding lock:
  000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0

  the existing dependency chain (in reverse order) is:
  -> #4 (&zone->lock){-.-.}-{2:2}:
  -> #3 (hrtimer_bases.lock){-.-.}-{2:2}:
  -> #2 (&rq->__lock){-.-.}-{2:2}:
  -> #1 (&p->pi_lock){-.-.}-{2:2}:
  -> #0 ((console_sem).lock){-.-.}-{2:2}:

The console_sem -> pi_lock dependency is due to calling try_to_wake_up()
while holding the console_sem raw_spinlock. This dependency can be broken
by using wake_q to do the wakeup instead of calling try_to_wake_up()
under the console_sem lock. This will also make the semaphore's
raw_spinlock become a terminal lock without taking any further locks
underneath it.

The hrtimer_bases.lock is a raw_spinlock while zone->lock is a
spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via
the debug_objects_fill_pool() helper function in the debugobjects code.

  -> #4 (&zone->lock){-.-.}-{2:2}:
         __lock_acquire+0xe86/0x1cc0
         lock_acquire.part.0+0x258/0x630
         lock_acquire+0xb8/0xe0
         _raw_spin_lock_irqsave+0xb4/0x120
         rmqueue_bulk+0xac/0x8f0
         __rmqueue_pcplist+0x580/0x830
         rmqueue_pcplist+0xfc/0x470
         rmqueue.isra.0+0xdec/0x11b0
         get_page_from_freelist+0x2ee/0xeb0
         __alloc_pages_noprof+0x2c2/0x520
         alloc_pages_mpol_noprof+0x1fc/0x4d0
         alloc_pages_noprof+0x8c/0xe0
         allocate_slab+0x320/0x460
         ___slab_alloc+0xa58/0x12b0
         __slab_alloc.isra.0+0x42/0x60
         kmem_cache_alloc_noprof+0x304/0x350
         fill_pool+0xf6/0x450
         debug_object_activate+0xfe/0x360
         enqueue_hrtimer+0x34/0x190
         __run_hrtimer+0x3c8/0x4c0
         __hrtimer_run_queues+0x1b2/0x260
         hrtimer_interrupt+0x316/0x760
         do_IRQ+0x9a/0xe0
         do_irq_async+0xf6/0x160

Normally a raw_spinlock to spinlock dependency is not legitimate
and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled,
but debug_objects_fill_pool() is an exception as it explicitly
allows this dependency for non-PREEMPT_RT kernel without causing
PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is
legitimate and not a bug.

Anyway, semaphore is the only locking primitive left that is still
using try_to_wake_up() to do wakeup inside critical section, all the
other locking primitives had been migrated to use wake_q to do wakeup
outside of the critical section. It is also possible that there are
other circular locking dependencies involving printk/console_sem or
other existing/new semaphores lurking somewhere which may show up in
the future. Let just do the migration now to wake_q to avoid headache
like this.

Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
[ Upstream commit b61e69b ]

syzbot report a deadlock in diFree. [1]

When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4,
which does not match the mounted loop device, causing the mapping of the
mounted loop device to be invalidated.

When creating the directory and creating the inode of iag in diReadSpecial(),
read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the
metapage data it returns is corrupted, which causes the nlink value of 0 to be
assigned to the iag inode when executing copy_from_dinode(), which ultimately
causes a deadlock when entering diFree().

To avoid this, first check the nlink value of dinode before setting iag inode.

[1]
WARNING: possible recursive locking detected
6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted
--------------------------------------------
syz-executor301/5309 is trying to acquire lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889

but task is already holding lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(imap->im_aglock[index]));
  lock(&(imap->im_aglock[index]));

 *** DEADLOCK ***

 May be due to missing lock nesting notation

5 locks held by syz-executor301/5309:
 #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515
 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline]
 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026
 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline]
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline]
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669

stack backtrace:
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037
 check_deadlock kernel/locking/lockdep.c:3089 [inline]
 validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891
 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202
 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
 __mutex_lock_common kernel/locking/mutex.c:608 [inline]
 __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156
 evict+0x4e8/0x9b0 fs/inode.c:725
 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline]
 duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022
 diNewIAG fs/jfs/jfs_imap.c:2597 [inline]
 diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669
 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590
 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225
 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
 do_mkdirat+0x264/0x3a0 fs/namei.c:4280
 __do_sys_mkdirat fs/namei.c:4295 [inline]
 __se_sys_mkdirat fs/namei.c:4293 [inline]
 __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Reported-by: syzbot+355da3b3a74881008e8f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=355da3b3a74881008e8f
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
commit 30ba2d0 upstream.

Commit c14f7cc ("PCI: Assign PCI domain IDs by ida_alloc()")
introduced a use-after-free bug in the bus removal cleanup. The issue was
found with kfence:

  [   19.293351] BUG: KFENCE: use-after-free read in pci_bus_release_domain_nr+0x10/0x70

  [   19.302817] Use-after-free read at 0x000000007f3b80eb (in kfence-torvalds#115):
  [   19.309677]  pci_bus_release_domain_nr+0x10/0x70
  [   19.309691]  dw_pcie_host_deinit+0x28/0x78
  [   19.309702]  tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
  [   19.309734]  tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
  [   19.309752]  platform_probe+0x90/0xd8
  ...

  [   19.311457] kfence-torvalds#115: 0x00000000063a155a-0x00000000ba698da8, size=1072, cache=kmalloc-2k

  [   19.311469] allocated by task 96 on cpu 10 at 19.279323s:
  [   19.311562]  __kmem_cache_alloc_node+0x260/0x278
  [   19.311571]  kmalloc_trace+0x24/0x30
  [   19.311580]  pci_alloc_bus+0x24/0xa0
  [   19.311590]  pci_register_host_bridge+0x48/0x4b8
  [   19.311601]  pci_scan_root_bus_bridge+0xc0/0xe8
  [   19.311613]  pci_host_probe+0x18/0xc0
  [   19.311623]  dw_pcie_host_init+0x2c0/0x568
  [   19.311630]  tegra_pcie_dw_probe+0x610/0xb28 [pcie_tegra194]
  [   19.311647]  platform_probe+0x90/0xd8
  ...

  [   19.311782] freed by task 96 on cpu 10 at 19.285833s:
  [   19.311799]  release_pcibus_dev+0x30/0x40
  [   19.311808]  device_release+0x30/0x90
  [   19.311814]  kobject_put+0xa8/0x120
  [   19.311832]  device_unregister+0x20/0x30
  [   19.311839]  pci_remove_bus+0x78/0x88
  [   19.311850]  pci_remove_root_bus+0x5c/0x98
  [   19.311860]  dw_pcie_host_deinit+0x28/0x78
  [   19.311866]  tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
  [   19.311883]  tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
  [   19.311900]  platform_probe+0x90/0xd8
  ...

  [   19.313579] CPU: 10 PID: 96 Comm: kworker/u24:2 Not tainted 6.2.0 #4
  [   19.320171] Hardware name:  /, BIOS 1.0-d7fb19b 08/10/2022
  [   19.325852] Workqueue: events_unbound deferred_probe_work_func

The stack trace is a bit misleading as dw_pcie_host_deinit() doesn't
directly call pci_bus_release_domain_nr(). The issue turns out to be in
pci_remove_root_bus() which first calls pci_remove_bus() which frees the
struct pci_bus when its struct device is released. Then
pci_bus_release_domain_nr() is called and accesses the freed struct
pci_bus. Reordering these fixes the issue.

Fixes: c14f7cc ("PCI: Assign PCI domain IDs by ida_alloc()")
Link: https://lore.kernel.org/r/20230329123835.2724518-1-robh@kernel.org
Link: https://lore.kernel.org/r/b529cb69-0602-9eed-fc02-2f068707a006@nvidia.com
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org	# v6.2+
Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
…cal section

[ Upstream commit 85b2b9c ]

A circular lock dependency splat has been seen involving down_trylock():

  ======================================================
  WARNING: possible circular locking dependency detected
  6.12.0-41.el10.s390x+debug
  ------------------------------------------------------
  dd/32479 is trying to acquire lock:
  0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90

  but task is already holding lock:
  000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0

  the existing dependency chain (in reverse order) is:
  -> #4 (&zone->lock){-.-.}-{2:2}:
  -> #3 (hrtimer_bases.lock){-.-.}-{2:2}:
  -> #2 (&rq->__lock){-.-.}-{2:2}:
  -> #1 (&p->pi_lock){-.-.}-{2:2}:
  -> #0 ((console_sem).lock){-.-.}-{2:2}:

The console_sem -> pi_lock dependency is due to calling try_to_wake_up()
while holding the console_sem raw_spinlock. This dependency can be broken
by using wake_q to do the wakeup instead of calling try_to_wake_up()
under the console_sem lock. This will also make the semaphore's
raw_spinlock become a terminal lock without taking any further locks
underneath it.

The hrtimer_bases.lock is a raw_spinlock while zone->lock is a
spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via
the debug_objects_fill_pool() helper function in the debugobjects code.

  -> #4 (&zone->lock){-.-.}-{2:2}:
         __lock_acquire+0xe86/0x1cc0
         lock_acquire.part.0+0x258/0x630
         lock_acquire+0xb8/0xe0
         _raw_spin_lock_irqsave+0xb4/0x120
         rmqueue_bulk+0xac/0x8f0
         __rmqueue_pcplist+0x580/0x830
         rmqueue_pcplist+0xfc/0x470
         rmqueue.isra.0+0xdec/0x11b0
         get_page_from_freelist+0x2ee/0xeb0
         __alloc_pages_noprof+0x2c2/0x520
         alloc_pages_mpol_noprof+0x1fc/0x4d0
         alloc_pages_noprof+0x8c/0xe0
         allocate_slab+0x320/0x460
         ___slab_alloc+0xa58/0x12b0
         __slab_alloc.isra.0+0x42/0x60
         kmem_cache_alloc_noprof+0x304/0x350
         fill_pool+0xf6/0x450
         debug_object_activate+0xfe/0x360
         enqueue_hrtimer+0x34/0x190
         __run_hrtimer+0x3c8/0x4c0
         __hrtimer_run_queues+0x1b2/0x260
         hrtimer_interrupt+0x316/0x760
         do_IRQ+0x9a/0xe0
         do_irq_async+0xf6/0x160

Normally a raw_spinlock to spinlock dependency is not legitimate
and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled,
but debug_objects_fill_pool() is an exception as it explicitly
allows this dependency for non-PREEMPT_RT kernel without causing
PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is
legitimate and not a bug.

Anyway, semaphore is the only locking primitive left that is still
using try_to_wake_up() to do wakeup inside critical section, all the
other locking primitives had been migrated to use wake_q to do wakeup
outside of the critical section. It is also possible that there are
other circular locking dependencies involving printk/console_sem or
other existing/new semaphores lurking somewhere which may show up in
the future. Let just do the migration now to wake_q to avoid headache
like this.

Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
[ Upstream commit b61e69b ]

syzbot report a deadlock in diFree. [1]

When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4,
which does not match the mounted loop device, causing the mapping of the
mounted loop device to be invalidated.

When creating the directory and creating the inode of iag in diReadSpecial(),
read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the
metapage data it returns is corrupted, which causes the nlink value of 0 to be
assigned to the iag inode when executing copy_from_dinode(), which ultimately
causes a deadlock when entering diFree().

To avoid this, first check the nlink value of dinode before setting iag inode.

[1]
WARNING: possible recursive locking detected
6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted
--------------------------------------------
syz-executor301/5309 is trying to acquire lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889

but task is already holding lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(imap->im_aglock[index]));
  lock(&(imap->im_aglock[index]));

 *** DEADLOCK ***

 May be due to missing lock nesting notation

5 locks held by syz-executor301/5309:
 #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515
 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline]
 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026
 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline]
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline]
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669

stack backtrace:
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037
 check_deadlock kernel/locking/lockdep.c:3089 [inline]
 validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891
 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202
 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
 __mutex_lock_common kernel/locking/mutex.c:608 [inline]
 __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156
 evict+0x4e8/0x9b0 fs/inode.c:725
 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline]
 duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022
 diNewIAG fs/jfs/jfs_imap.c:2597 [inline]
 diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669
 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590
 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225
 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
 do_mkdirat+0x264/0x3a0 fs/namei.c:4280
 __do_sys_mkdirat fs/namei.c:4295 [inline]
 __se_sys_mkdirat fs/namei.c:4293 [inline]
 __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Reported-by: syzbot+355da3b3a74881008e8f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=355da3b3a74881008e8f
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
commit 78cfd17 upstream.

Undefined behavior is triggered when bnxt_qplib_alloc_init_hwq is called
with hwq_attr->aux_depth != 0 and hwq_attr->aux_stride == 0.
In that case, "roundup_pow_of_two(hwq_attr->aux_stride)" gets called.
roundup_pow_of_two is documented as undefined for 0.

Fix it in the one caller that had this combination.

The undefined behavior was detected by UBSAN:
  UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
  shift exponent 64 is too large for 64-bit type 'long unsigned int'
  CPU: 24 PID: 1075 Comm: (udev-worker) Not tainted 6.9.0-rc6+ #4
  Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.7 10/25/2023
  Call Trace:
   <TASK>
   dump_stack_lvl+0x5d/0x80
   ubsan_epilogue+0x5/0x30
   __ubsan_handle_shift_out_of_bounds.cold+0x61/0xec
   __roundup_pow_of_two+0x25/0x35 [bnxt_re]
   bnxt_qplib_alloc_init_hwq+0xa1/0x470 [bnxt_re]
   bnxt_qplib_create_qp+0x19e/0x840 [bnxt_re]
   bnxt_re_create_qp+0x9b1/0xcd0 [bnxt_re]
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __kmalloc+0x1b6/0x4f0
   ? create_qp.part.0+0x128/0x1c0 [ib_core]
   ? __pfx_bnxt_re_create_qp+0x10/0x10 [bnxt_re]
   create_qp.part.0+0x128/0x1c0 [ib_core]
   ib_create_qp_kernel+0x50/0xd0 [ib_core]
   create_mad_qp+0x8e/0xe0 [ib_core]
   ? __pfx_qp_event_handler+0x10/0x10 [ib_core]
   ib_mad_init_device+0x2be/0x680 [ib_core]
   add_client_context+0x10d/0x1a0 [ib_core]
   enable_device_and_get+0xe0/0x1d0 [ib_core]
   ib_register_device+0x53c/0x630 [ib_core]
   ? srso_alias_return_thunk+0x5/0xfbef5
   bnxt_re_probe+0xbd8/0xe50 [bnxt_re]
   ? __pfx_bnxt_re_probe+0x10/0x10 [bnxt_re]
   auxiliary_bus_probe+0x49/0x80
   ? driver_sysfs_add+0x57/0xc0
   really_probe+0xde/0x340
   ? pm_runtime_barrier+0x54/0x90
   ? __pfx___driver_attach+0x10/0x10
   __driver_probe_device+0x78/0x110
   driver_probe_device+0x1f/0xa0
   __driver_attach+0xba/0x1c0
   bus_for_each_dev+0x8f/0xe0
   bus_add_driver+0x146/0x220
   driver_register+0x72/0xd0
   __auxiliary_driver_register+0x6e/0xd0
   ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re]
   bnxt_re_mod_init+0x3e/0xff0 [bnxt_re]
   ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re]
   do_one_initcall+0x5b/0x310
   do_init_module+0x90/0x250
   init_module_from_file+0x86/0xc0
   idempotent_init_module+0x121/0x2b0
   __x64_sys_finit_module+0x5e/0xb0
   do_syscall_64+0x82/0x160
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? syscall_exit_to_user_mode_prepare+0x149/0x170
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? syscall_exit_to_user_mode+0x75/0x230
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? do_syscall_64+0x8e/0x160
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __count_memcg_events+0x69/0x100
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? count_memcg_events.constprop.0+0x1a/0x30
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? handle_mm_fault+0x1f0/0x300
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? do_user_addr_fault+0x34e/0x640
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   entry_SYSCALL_64_after_hwframe+0x76/0x7e
  RIP: 0033:0x7f4e5132821d
  Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 db 0c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffca9c906a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
  RAX: ffffffffffffffda RBX: 0000563ec8a8f130 RCX: 00007f4e5132821d
  RDX: 0000000000000000 RSI: 00007f4e518fa07d RDI: 000000000000003b
  RBP: 00007ffca9c90760 R08: 00007f4e513f6b20 R09: 00007ffca9c906f0
  R10: 0000563ec8a8faa0 R11: 0000000000000246 R12: 00007f4e518fa07d
  R13: 0000000000020000 R14: 0000563ec8409e90 R15: 0000563ec8a8fa60
   </TASK>
  ---[ end trace ]---

Fixes: 0c4dcd6 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20240507103929.30003-1-mschmidt@redhat.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Harshit: backport to 5.15.y, this is a clean cherrypick from 6.1.y
commit ]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
commit fd7b4f9 upstream.

When CONFIG_KASAN_SW_TAGS and CONFIG_KASAN_STACK are enabled, the
object_is_on_stack() function may produce incorrect results due to the
presence of tags in the obj pointer, while the stack pointer does not have
tags.  This discrepancy can lead to incorrect stack object detection and
subsequently trigger warnings if CONFIG_DEBUG_OBJECTS is also enabled.

Example of the warning:

ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:557 __debug_object_init+0x330/0x364
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5 #4
Hardware name: linux,dummy-virt (DT)
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __debug_object_init+0x330/0x364
lr : __debug_object_init+0x330/0x364
sp : ffff800082ea7b40
x29: ffff800082ea7b40 x28: 98ff0000c0164518 x27: 98ff0000c0164534
x26: ffff800082d93ec8 x25: 0000000000000001 x24: 1cff0000c00172a0
x23: 0000000000000000 x22: ffff800082d93ed0 x21: ffff800081a24418
x20: 3eff800082ea7bb0 x19: efff800000000000 x18: 0000000000000000
x17: 00000000000000ff x16: 0000000000000047 x15: 206b63617473206e
x14: 0000000000000018 x13: ffff800082ea7780 x12: 0ffff800082ea78e
x11: 0ffff800082ea790 x10: 0ffff800082ea79d x9 : 34d77febe173e800
x8 : 34d77febe173e800 x7 : 0000000000000001 x6 : 0000000000000001
x5 : feff800082ea74b8 x4 : ffff800082870a90 x3 : ffff80008018d3c4
x2 : 0000000000000001 x1 : ffff800082858810 x0 : 0000000000000050
Call trace:
 __debug_object_init+0x330/0x364
 debug_object_init_on_stack+0x30/0x3c
 schedule_hrtimeout_range_clock+0xac/0x26c
 schedule_hrtimeout+0x1c/0x30
 wait_task_inactive+0x1d4/0x25c
 kthread_bind_mask+0x28/0x98
 init_rescuer+0x1e8/0x280
 workqueue_init+0x1a0/0x3cc
 kernel_init_freeable+0x118/0x200
 kernel_init+0x28/0x1f0
 ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated.
------------[ cut here ]------------

Link: https://lkml.kernel.org/r/20241113042544.19095-1-qun-wei.lin@mediatek.com
Signed-off-by: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Andrew Yang <andrew.yang@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Casper Li <casper.li@mediatek.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[Minor context change fixed]
Signed-off-by: Zhi Yang <Zhi.Yang@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request May 14, 2025
commit 30ba2d0 upstream.

Commit c14f7cc ("PCI: Assign PCI domain IDs by ida_alloc()")
introduced a use-after-free bug in the bus removal cleanup. The issue was
found with kfence:

  [   19.293351] BUG: KFENCE: use-after-free read in pci_bus_release_domain_nr+0x10/0x70

  [   19.302817] Use-after-free read at 0x000000007f3b80eb (in kfence-torvalds#115):
  [   19.309677]  pci_bus_release_domain_nr+0x10/0x70
  [   19.309691]  dw_pcie_host_deinit+0x28/0x78
  [   19.309702]  tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
  [   19.309734]  tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
  [   19.309752]  platform_probe+0x90/0xd8
  ...

  [   19.311457] kfence-torvalds#115: 0x00000000063a155a-0x00000000ba698da8, size=1072, cache=kmalloc-2k

  [   19.311469] allocated by task 96 on cpu 10 at 19.279323s:
  [   19.311562]  __kmem_cache_alloc_node+0x260/0x278
  [   19.311571]  kmalloc_trace+0x24/0x30
  [   19.311580]  pci_alloc_bus+0x24/0xa0
  [   19.311590]  pci_register_host_bridge+0x48/0x4b8
  [   19.311601]  pci_scan_root_bus_bridge+0xc0/0xe8
  [   19.311613]  pci_host_probe+0x18/0xc0
  [   19.311623]  dw_pcie_host_init+0x2c0/0x568
  [   19.311630]  tegra_pcie_dw_probe+0x610/0xb28 [pcie_tegra194]
  [   19.311647]  platform_probe+0x90/0xd8
  ...

  [   19.311782] freed by task 96 on cpu 10 at 19.285833s:
  [   19.311799]  release_pcibus_dev+0x30/0x40
  [   19.311808]  device_release+0x30/0x90
  [   19.311814]  kobject_put+0xa8/0x120
  [   19.311832]  device_unregister+0x20/0x30
  [   19.311839]  pci_remove_bus+0x78/0x88
  [   19.311850]  pci_remove_root_bus+0x5c/0x98
  [   19.311860]  dw_pcie_host_deinit+0x28/0x78
  [   19.311866]  tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194]
  [   19.311883]  tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194]
  [   19.311900]  platform_probe+0x90/0xd8
  ...

  [   19.313579] CPU: 10 PID: 96 Comm: kworker/u24:2 Not tainted 6.2.0 #4
  [   19.320171] Hardware name:  /, BIOS 1.0-d7fb19b 08/10/2022
  [   19.325852] Workqueue: events_unbound deferred_probe_work_func

The stack trace is a bit misleading as dw_pcie_host_deinit() doesn't
directly call pci_bus_release_domain_nr(). The issue turns out to be in
pci_remove_root_bus() which first calls pci_remove_bus() which frees the
struct pci_bus when its struct device is released. Then
pci_bus_release_domain_nr() is called and accesses the freed struct
pci_bus. Reordering these fixes the issue.

Fixes: c14f7cc ("PCI: Assign PCI domain IDs by ida_alloc()")
Link: https://lore.kernel.org/r/20230329123835.2724518-1-robh@kernel.org
Link: https://lore.kernel.org/r/b529cb69-0602-9eed-fc02-2f068707a006@nvidia.com
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org	# v6.2+
Cc: Pali Rohár <pali@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request May 20, 2025
commit be6e843 upstream.

When migrating a THP, concurrent access to the PMD migration entry during
a deferred split scan can lead to an invalid address access, as
illustrated below.  To prevent this invalid access, it is necessary to
check the PMD migration entry and return early.  In this context, there is
no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the
equality of the target folio.  Since the PMD migration entry is locked, it
cannot be served as the target.

Mailing list discussion and explanation from Hugh Dickins: "An anon_vma
lookup points to a location which may contain the folio of interest, but
might instead contain another folio: and weeding out those other folios is
precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of
replacing the wrong folio" comment a few lines above it) is for."

BUG: unable to handle page fault for address: ffffea60001db008
CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60
Call Trace:
<TASK>
try_to_migrate_one+0x28c/0x3730
rmap_walk_anon+0x4f6/0x770
unmap_folio+0x196/0x1f0
split_huge_page_to_list_to_order+0x9f6/0x1560
deferred_split_scan+0xac5/0x12a0
shrinker_debugfs_scan_write+0x376/0x470
full_proxy_write+0x15c/0x220
vfs_write+0x2fc/0xcb0
ksys_write+0x146/0x250
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e

The bug is found by syzkaller on an internal kernel, then confirmed on
upstream.

Link: https://lkml.kernel.org/r/20250421113536.3682201-1-gavinguo@igalia.com
Link: https://lore.kernel.org/all/20250414072737.1698513-1-gavinguo@igalia.com/
Link: https://lore.kernel.org/all/20250418085802.2973519-1-gavinguo@igalia.com/
Fixes: 84c3fc4 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Gavin Guo <gavinguo@igalia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Florent Revest <revest@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Jun 9, 2025
commit 78ab4be upstream.

A warning on driver removal started occurring after commit 9dd05df
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().

 WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
 Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
 RIP: 0010:__netif_napi_del_locked+0xf0/0x100
 Call Trace:
 <TASK>
 mt76_dma_cleanup+0x54/0x2f0 [mt76]
 mt7921_pci_remove+0xd5/0x190 [mt7921e]
 pci_device_remove+0x47/0xc0
 device_release_driver_internal+0x19e/0x200
 driver_detach+0x48/0x90
 bus_remove_driver+0x6d/0xf0
 pci_unregister_driver+0x2e/0xb0
 __do_sys_delete_module.isra.0+0x197/0x2e0
 do_syscall_64+0x7b/0x160
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 2ac515a ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Jun 9, 2025
[ Upstream commit 88f7f56 ]

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().

An example from v5.4, similar problem also exists in upstream:

    crash> bt 2091206
    PID: 2091206  TASK: ffff2050df92a300  CPU: 109  COMMAND: "kworker/u260:0"
     #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
     #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
     #2 [ffff800084a2f880] schedule at ffff800040bfa4b4
     #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
     #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
     #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
     #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
     #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
     #8 [ffff800084a2fa60] generic_make_request at ffff800040570138
     #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
    #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
    #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
    #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
    #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
    #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
    #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
    #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
    #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
    #18 [ffff800084a2fe70] kthread at ffff800040118de4

After commit 2def284 ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.

Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait().

Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Tianxiang Peng <txpeng@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Jun 9, 2025
commit 78ab4be upstream.

A warning on driver removal started occurring after commit 9dd05df
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().

 WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
 Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
 RIP: 0010:__netif_napi_del_locked+0xf0/0x100
 Call Trace:
 <TASK>
 mt76_dma_cleanup+0x54/0x2f0 [mt76]
 mt7921_pci_remove+0xd5/0x190 [mt7921e]
 pci_device_remove+0x47/0xc0
 device_release_driver_internal+0x19e/0x200
 driver_detach+0x48/0x90
 bus_remove_driver+0x6d/0xf0
 pci_unregister_driver+0x2e/0xb0
 __do_sys_delete_module.isra.0+0x197/0x2e0
 do_syscall_64+0x7b/0x160
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 2ac515a ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Jun 9, 2025
commit 78ab4be upstream.

A warning on driver removal started occurring after commit 9dd05df
("net: warn if NAPI instance wasn't shut down"). Disable tx napi before
deleting it in mt76_dma_cleanup().

 WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100
 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy)
 Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024
 RIP: 0010:__netif_napi_del_locked+0xf0/0x100
 Call Trace:
 <TASK>
 mt76_dma_cleanup+0x54/0x2f0 [mt76]
 mt7921_pci_remove+0xd5/0x190 [mt7921e]
 pci_device_remove+0x47/0xc0
 device_release_driver_internal+0x19e/0x200
 driver_detach+0x48/0x90
 bus_remove_driver+0x6d/0xf0
 pci_unregister_driver+0x2e/0xb0
 __do_sys_delete_module.isra.0+0x197/0x2e0
 do_syscall_64+0x7b/0x160
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

Tested with mt7921e but the same pattern can be actually applied to other
mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled
in their *_dma_init() functions and only toggled off and on again inside
their suspend/resume/reset paths. So it should be okay to disable tx
napi in such a generic way.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 2ac515a ("mt76: mt76x02: use napi polling for tx cleanup")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Tested-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Jun 9, 2025
[ Upstream commit 88f7f56 ]

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().

An example from v5.4, similar problem also exists in upstream:

    crash> bt 2091206
    PID: 2091206  TASK: ffff2050df92a300  CPU: 109  COMMAND: "kworker/u260:0"
     #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
     #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
     #2 [ffff800084a2f880] schedule at ffff800040bfa4b4
     #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
     #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
     #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
     #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
     #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
     #8 [ffff800084a2fa60] generic_make_request at ffff800040570138
     #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
    #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
    #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
    #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
    #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
    #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
    #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
    #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
    #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
    #18 [ffff800084a2fe70] kthread at ffff800040118de4

After commit 2def284 ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.

Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait().

Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Tianxiang Peng <txpeng@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Jun 23, 2025
[ Upstream commit ee684de ]

As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset    <-- size_t overflow here
- prog_end   = prog_start + prog_size

    prog_start        sec_start        prog_end        sec_end
        |                |                 |              |
        v                v                 v              v
    .....................|################################|............

The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8

    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947 ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").

Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <2524158037@qq.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Jun 23, 2025
commit c98cc97 upstream.

Running a modified trace-cmd record --nosplice where it does a mmap of the
ring buffer when '--nosplice' is set, caused the following lockdep splat:

 ======================================================
 WARNING: possible circular locking dependency detected
 6.15.0-rc7-test-00002-gfb7d03d8a82f torvalds#551 Not tainted
 ------------------------------------------------------
 trace-cmd/1113 is trying to acquire lock:
 ffff888100062888 (&buffer->mutex){+.+.}-{4:4}, at: ring_buffer_map+0x11c/0xe70

 but task is already holding lock:
 ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #5 (&cpu_buffer->mapping_lock){+.+.}-{4:4}:
        __mutex_lock+0x192/0x18c0
        ring_buffer_map+0xcf/0xe70
        tracing_buffers_mmap+0x1c4/0x3b0
        __mmap_region+0xd8d/0x1f70
        do_mmap+0x9d7/0x1010
        vm_mmap_pgoff+0x20b/0x390
        ksys_mmap_pgoff+0x2e9/0x440
        do_syscall_64+0x79/0x1c0
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 -> #4 (&mm->mmap_lock){++++}-{4:4}:
        __might_fault+0xa5/0x110
        _copy_to_user+0x22/0x80
        _perf_ioctl+0x61b/0x1b70
        perf_ioctl+0x62/0x90
        __x64_sys_ioctl+0x134/0x190
        do_syscall_64+0x79/0x1c0
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 -> #3 (&cpuctx_mutex){+.+.}-{4:4}:
        __mutex_lock+0x192/0x18c0
        perf_event_init_cpu+0x325/0x7c0
        perf_event_init+0x52a/0x5b0
        start_kernel+0x263/0x3e0
        x86_64_start_reservations+0x24/0x30
        x86_64_start_kernel+0x95/0xa0
        common_startup_64+0x13e/0x141

 -> #2 (pmus_lock){+.+.}-{4:4}:
        __mutex_lock+0x192/0x18c0
        perf_event_init_cpu+0xb7/0x7c0
        cpuhp_invoke_callback+0x2c0/0x1030
        __cpuhp_invoke_callback_range+0xbf/0x1f0
        _cpu_up+0x2e7/0x690
        cpu_up+0x117/0x170
        cpuhp_bringup_mask+0xd5/0x120
        bringup_nonboot_cpus+0x13d/0x170
        smp_init+0x2b/0xf0
        kernel_init_freeable+0x441/0x6d0
        kernel_init+0x1e/0x160
        ret_from_fork+0x34/0x70
        ret_from_fork_asm+0x1a/0x30

 -> #1 (cpu_hotplug_lock){++++}-{0:0}:
        cpus_read_lock+0x2a/0xd0
        ring_buffer_resize+0x610/0x14e0
        __tracing_resize_ring_buffer.part.0+0x42/0x120
        tracing_set_tracer+0x7bd/0xa80
        tracing_set_trace_write+0x132/0x1e0
        vfs_write+0x21c/0xe80
        ksys_write+0xf9/0x1c0
        do_syscall_64+0x79/0x1c0
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 -> #0 (&buffer->mutex){+.+.}-{4:4}:
        __lock_acquire+0x1405/0x2210
        lock_acquire+0x174/0x310
        __mutex_lock+0x192/0x18c0
        ring_buffer_map+0x11c/0xe70
        tracing_buffers_mmap+0x1c4/0x3b0
        __mmap_region+0xd8d/0x1f70
        do_mmap+0x9d7/0x1010
        vm_mmap_pgoff+0x20b/0x390
        ksys_mmap_pgoff+0x2e9/0x440
        do_syscall_64+0x79/0x1c0
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 other info that might help us debug this:

 Chain exists of:
   &buffer->mutex --> &mm->mmap_lock --> &cpu_buffer->mapping_lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&cpu_buffer->mapping_lock);
                                lock(&mm->mmap_lock);
                                lock(&cpu_buffer->mapping_lock);
   lock(&buffer->mutex);

  *** DEADLOCK ***

 2 locks held by trace-cmd/1113:
  #0: ffff888106b847e0 (&mm->mmap_lock){++++}-{4:4}, at: vm_mmap_pgoff+0x192/0x390
  #1: ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70

 stack backtrace:
 CPU: 5 UID: 0 PID: 1113 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00002-gfb7d03d8a82f torvalds#551 PREEMPT
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x6e/0xa0
  print_circular_bug.cold+0x178/0x1be
  check_noncircular+0x146/0x160
  __lock_acquire+0x1405/0x2210
  lock_acquire+0x174/0x310
  ? ring_buffer_map+0x11c/0xe70
  ? ring_buffer_map+0x11c/0xe70
  ? __mutex_lock+0x169/0x18c0
  __mutex_lock+0x192/0x18c0
  ? ring_buffer_map+0x11c/0xe70
  ? ring_buffer_map+0x11c/0xe70
  ? function_trace_call+0x296/0x370
  ? __pfx___mutex_lock+0x10/0x10
  ? __pfx_function_trace_call+0x10/0x10
  ? __pfx___mutex_lock+0x10/0x10
  ? _raw_spin_unlock+0x2d/0x50
  ? ring_buffer_map+0x11c/0xe70
  ? ring_buffer_map+0x11c/0xe70
  ? __mutex_lock+0x5/0x18c0
  ring_buffer_map+0x11c/0xe70
  ? do_raw_spin_lock+0x12d/0x270
  ? find_held_lock+0x2b/0x80
  ? _raw_spin_unlock+0x2d/0x50
  ? rcu_is_watching+0x15/0xb0
  ? _raw_spin_unlock+0x2d/0x50
  ? trace_preempt_on+0xd0/0x110
  tracing_buffers_mmap+0x1c4/0x3b0
  __mmap_region+0xd8d/0x1f70
  ? ring_buffer_lock_reserve+0x99/0xff0
  ? __pfx___mmap_region+0x10/0x10
  ? ring_buffer_lock_reserve+0x99/0xff0
  ? __pfx_ring_buffer_lock_reserve+0x10/0x10
  ? __pfx_ring_buffer_lock_reserve+0x10/0x10
  ? bpf_lsm_mmap_addr+0x4/0x10
  ? security_mmap_addr+0x46/0xd0
  ? lock_is_held_type+0xd9/0x130
  do_mmap+0x9d7/0x1010
  ? 0xffffffffc0370095
  ? __pfx_do_mmap+0x10/0x10
  vm_mmap_pgoff+0x20b/0x390
  ? __pfx_vm_mmap_pgoff+0x10/0x10
  ? 0xffffffffc0370095
  ksys_mmap_pgoff+0x2e9/0x440
  do_syscall_64+0x79/0x1c0
  entry_SYSCALL_64_after_hwframe+0x76/0x7e
 RIP: 0033:0x7fb0963a7de2
 Code: 00 00 00 0f 1f 44 00 00 41 f7 c1 ff 0f 00 00 75 27 55 89 cd 53 48 89 fb 48 85 ff 74 3b 41 89 ea 48 89 df b8 09 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 5b 5d c3 0f 1f 00 48 8b 05 e1 9f 0d 00 64
 RSP: 002b:00007ffdcc8fb878 EFLAGS: 00000246 ORIG_RAX: 0000000000000009
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb0963a7de2
 RDX: 0000000000000001 RSI: 0000000000001000 RDI: 0000000000000000
 RBP: 0000000000000001 R08: 0000000000000006 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007ffdcc8fbe68 R14: 00007fb096628000 R15: 00005633e01a5c90
  </TASK>

The issue is that cpus_read_lock() is taken within buffer->mutex. The
memory mapped pages are taken with the mmap_lock held. The buffer->mutex
is taken within the cpu_buffer->mapping_lock. There's quite a chain with
all these locks, where the deadlock can be fixed by moving the
cpus_read_lock() outside the taking of the buffer->mutex.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250527105820.0f45d045@gandalf.local.home
Fixes: 117c392 ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Jun 30, 2025
[ Upstream commit eedf3e3 ]

ACPICA commit 1c28da2242783579d59767617121035dafba18c3

This was originally done in NetBSD:
NetBSD/src@b69d1ac
and is the correct alternative to the smattering of `memcpy`s I
previously contributed to this repository.

This also sidesteps the newly strict checks added in UBSAN:
llvm/llvm-project@7926744

Before this change we see the following UBSAN stack trace in Fuchsia:

  #0    0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e
  #1.2  0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c
  #1.1  0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c
  #1    0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c
  #2    0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f
  #3    0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723
  #4    0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e
  #5    0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089
  #6    0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169
  #7    0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a
  #8    0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7
  #9    0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979
  #10   0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f
  #11   0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf
  #12   0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278
  #13   0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87
  #14   0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d
  #15   0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e
  #16   0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad
  #17   0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e
  #18   0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7
  #19   0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342
  #20   0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3
  #21   0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616
  #22   0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323
  #23   0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76
  #24   0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831
  #25   0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc
  #26   0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58
  #27   0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159
  #28   0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414
  #29   0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d
  #30   0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7
  #31   0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66
  #32   0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9
  #33   0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d
  #34   0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983
  #35   0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e
  #36   0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509
  #37   0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958
  #38   0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247
  #39   0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962
  #40   0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30
  #41   0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d

Link: acpica/acpica@1c28da22
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4664267.LvFx2qVVIh@rjwysocki.net
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
[ rjw: Pick up the tag from Tamir ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Jun 30, 2025
[ Upstream commit 1e9ac33 ]

Before the commit under the Fixes tag below, bnxt_ulp_stop() and
bnxt_ulp_start() were always invoked in pairs.  After that commit,
the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop()
has been called.  This may result in the RoCE driver's aux driver
.suspend() method being invoked twice.  The 2nd bnxt_re_suspend()
call will crash when it dereferences a NULL pointer:

(NULL ib_device): Handle device suspend call
BUG: kernel NULL pointer dereference, address: 0000000000000b78
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S                  6.15.0-rc1 #4 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en]
RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re]
Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00
RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff
RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff
R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070
R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bnxt_ulp_stop+0x69/0x90 [bnxt_en]
bnxt_sp_task+0x678/0x920 [bnxt_en]
? __schedule+0x514/0xf50
process_scheduled_works+0x9d/0x400
worker_thread+0x11c/0x260
? __pfx_worker_thread+0x10/0x10
kthread+0xfe/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2b/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30

Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag
is already set.  This will preserve the original symmetrical
bnxt_ulp_stop() and bnxt_ulp_start().

Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED
flag after taking the mutex to avoid any race condition.  And for
symmetry, only proceed in bnxt_ulp_start() if the
BNXT_EN_FLAG_ULP_STOPPED is set.

Fixes: 3c163f3 ("bnxt_en: Optimize recovery path ULP locking in the driver")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Co-developed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613231841.377988-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Jul 18, 2025
[ Upstream commit ee684de ]

As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset    <-- size_t overflow here
- prog_end   = prog_start + prog_size

    prog_start        sec_start        prog_end        sec_end
        |                |                 |              |
        v                v                 v              v
    .....................|################################|............

The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8

    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947 ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").

Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <2524158037@qq.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Jul 18, 2025
commit be6e843 upstream.

When migrating a THP, concurrent access to the PMD migration entry during
a deferred split scan can lead to an invalid address access, as
illustrated below.  To prevent this invalid access, it is necessary to
check the PMD migration entry and return early.  In this context, there is
no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the
equality of the target folio.  Since the PMD migration entry is locked, it
cannot be served as the target.

Mailing list discussion and explanation from Hugh Dickins: "An anon_vma
lookup points to a location which may contain the folio of interest, but
might instead contain another folio: and weeding out those other folios is
precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of
replacing the wrong folio" comment a few lines above it) is for."

BUG: unable to handle page fault for address: ffffea60001db008
CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60
Call Trace:
<TASK>
try_to_migrate_one+0x28c/0x3730
rmap_walk_anon+0x4f6/0x770
unmap_folio+0x196/0x1f0
split_huge_page_to_list_to_order+0x9f6/0x1560
deferred_split_scan+0xac5/0x12a0
shrinker_debugfs_scan_write+0x376/0x470
full_proxy_write+0x15c/0x220
vfs_write+0x2fc/0xcb0
ksys_write+0x146/0x250
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e

The bug is found by syzkaller on an internal kernel, then confirmed on
upstream.

Link: https://lkml.kernel.org/r/20250421113536.3682201-1-gavinguo@igalia.com
Link: https://lore.kernel.org/all/20250414072737.1698513-1-gavinguo@igalia.com/
Link: https://lore.kernel.org/all/20250418085802.2973519-1-gavinguo@igalia.com/
Fixes: 84c3fc4 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Gavin Guo <gavinguo@igalia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Florent Revest <revest@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[gavin: backport the migration checking logic to __split_huge_pmd]
Signed-off-by: Gavin Guo <gavinguo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Jul 18, 2025
[ Upstream commit ee684de ]

As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset    <-- size_t overflow here
- prog_end   = prog_start + prog_size

    prog_start        sec_start        prog_end        sec_end
        |                |                 |              |
        v                v                 v              v
    .....................|################################|............

The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8

    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947 ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").

Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <2524158037@qq.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Jul 18, 2025
commit be6e843 upstream.

When migrating a THP, concurrent access to the PMD migration entry during
a deferred split scan can lead to an invalid address access, as
illustrated below.  To prevent this invalid access, it is necessary to
check the PMD migration entry and return early.  In this context, there is
no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the
equality of the target folio.  Since the PMD migration entry is locked, it
cannot be served as the target.

Mailing list discussion and explanation from Hugh Dickins: "An anon_vma
lookup points to a location which may contain the folio of interest, but
might instead contain another folio: and weeding out those other folios is
precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of
replacing the wrong folio" comment a few lines above it) is for."

BUG: unable to handle page fault for address: ffffea60001db008
CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60
Call Trace:
<TASK>
try_to_migrate_one+0x28c/0x3730
rmap_walk_anon+0x4f6/0x770
unmap_folio+0x196/0x1f0
split_huge_page_to_list_to_order+0x9f6/0x1560
deferred_split_scan+0xac5/0x12a0
shrinker_debugfs_scan_write+0x376/0x470
full_proxy_write+0x15c/0x220
vfs_write+0x2fc/0xcb0
ksys_write+0x146/0x250
do_syscall_64+0x6a/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e

The bug is found by syzkaller on an internal kernel, then confirmed on
upstream.

Link: https://lkml.kernel.org/r/20250421113536.3682201-1-gavinguo@igalia.com
Link: https://lore.kernel.org/all/20250414072737.1698513-1-gavinguo@igalia.com/
Link: https://lore.kernel.org/all/20250418085802.2973519-1-gavinguo@igalia.com/
Fixes: 84c3fc4 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Gavin Guo <gavinguo@igalia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Florent Revest <revest@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[gavin: backport the migration checking logic to __split_huge_pmd]
Signed-off-by: Gavin Guo <gavinguo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Jul 18, 2025
… context

[ Upstream commit 9ca7a42 ]

The current use of a mutex to protect the notifier hashtable accesses
can lead to issues in the atomic context. It results in the below
kernel warnings:

  |  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258
  |  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0
  |  preempt_count: 1, expected: 0
  |  RCU nest depth: 0, expected: 0
  |  CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0 #4
  |  Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn
  |  Call trace:
  |   show_stack+0x18/0x24 (C)
  |   dump_stack_lvl+0x78/0x90
  |   dump_stack+0x18/0x24
  |   __might_resched+0x114/0x170
  |   __might_sleep+0x48/0x98
  |   mutex_lock+0x24/0x80
  |   handle_notif_callbacks+0x54/0xe0
  |   notif_get_and_handle+0x40/0x88
  |   generic_exec_single+0x80/0xc0
  |   smp_call_function_single+0xfc/0x1a0
  |   notif_pcpu_irq_work_fn+0x2c/0x38
  |   process_one_work+0x14c/0x2b4
  |   worker_thread+0x2e4/0x3e0
  |   kthread+0x13c/0x210
  |   ret_from_fork+0x10/0x20

To address this, replace the mutex with an rwlock to protect the notifier
hashtable accesses. This ensures that read-side locking does not sleep and
multiple readers can acquire the lock concurrently, avoiding unnecessary
contention and potential deadlocks. Writer access remains exclusive,
preserving correctness.

This change resolves warnings from lockdep about potential sleep in
atomic context.

Cc: Jens Wiklander <jens.wiklander@linaro.org>
Reported-by: Jérôme Forissier <jerome.forissier@linaro.org>
Closes: OP-TEE/optee_os#7394
Fixes: e057344 ("firmware: arm_ffa: Add interfaces to request notification callbacks")
Message-Id: <20250528-ffa_notif_fix-v1-3-5ed7bc7f8437@arm.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Jul 21, 2025
…ux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.16, take #4

- Gracefully fail initialising pKVM if the interrupt controller isn't
  GICv3

- Also gracefully fail initialising pKVM if the carveout allocation
  fails

- Fix the computing of the minimum MMIO range required for the host on
  stage-2 fault

- Fix the generation of the GICv3 Maintenance Interrupt in nested mode
tobetter pushed a commit that referenced this pull request Sep 1, 2025
commit f7fa852 upstream.

Add the SM6115 MDSS compatible to clients compatible list, as it also
needs that workaround.
Without this workaround, for example, QRB4210 RB2 which is based on
SM4250/SM6115 generates a lot of smmu unhandled context faults during
boot:

arm_smmu_context_fault: 116854 callbacks suppressed
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR    = 00000402 [Format=2 TF], SID=0x420
arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR    = 00000402 [Format=2 TF], SID=0x420

and also failed initialisation of lontium lt9611uxc, gpu and dpu is
observed:
(binding MDSS components triggered by lt9611uxc have failed)

 ------------[ cut here ]------------
 !aspace
 WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm]
 Modules linked in: ... (long list of modules)
 CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT
 Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : msm_gem_vma_init+0x150/0x18c [msm]
 lr : msm_gem_vma_init+0x150/0x18c [msm]
 sp : ffff80008144b280
  		...
 Call trace:
  msm_gem_vma_init+0x150/0x18c [msm] (P)
  get_vma_locked+0xc0/0x194 [msm]
  msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm]
  msm_gem_kernel_new+0x48/0x160 [msm]
  msm_gpu_init+0x34c/0x53c [msm]
  adreno_gpu_init+0x1b0/0x2d8 [msm]
  a6xx_gpu_init+0x1e8/0x9e0 [msm]
  adreno_bind+0x2b8/0x348 [msm]
  component_bind_all+0x100/0x230
  msm_drm_bind+0x13c/0x3d0 [msm]
  try_to_bring_up_aggregate_device+0x164/0x1d0
  __component_add+0xa4/0x174
  component_add+0x14/0x20
  dsi_dev_attach+0x20/0x34 [msm]
  dsi_host_attach+0x58/0x98 [msm]
  devm_mipi_dsi_attach+0x34/0x90
  lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc]
  lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc]
  i2c_device_probe+0x148/0x2a8
  really_probe+0xbc/0x2c0
  __driver_probe_device+0x78/0x120
  driver_probe_device+0x3c/0x154
  __driver_attach+0x90/0x1a0
  bus_for_each_dev+0x68/0xb8
  driver_attach+0x24/0x30
  bus_add_driver+0xe4/0x208
  driver_register+0x68/0x124
  i2c_register_driver+0x48/0xcc
  lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc]
  do_one_initcall+0x60/0x1d4
  do_init_module+0x54/0x1fc
  load_module+0x1748/0x1c8c
  init_module_from_file+0x74/0xa0
  __arm64_sys_finit_module+0x130/0x2f8
  invoke_syscall+0x48/0x104
  el0_svc_common.constprop.0+0xc0/0xe0
  do_el0_svc+0x1c/0x28
  el0_svc+0x2c/0x80
  el0t_64_sync_handler+0x10c/0x138
  el0t_64_sync+0x198/0x19c
 ---[ end trace 0000000000000000 ]---
 msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22
 msm_dpu 5e01000.display-controller: failed to load adreno gpu
 platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19
 msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22
 msm_dpu 5e01000.display-controller: adev bind failed: -22
 lt9611uxc 0-002b: failed to attach dsi to host
 lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22

Suggested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Fixes: 3581b70 ("drm/msm/disp/dpu1: add support for display on SM6115")
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20250613173238.15061-1-alexey.klimov@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tobetter pushed a commit that referenced this pull request Sep 1, 2025
[ Upstream commit d9cef55 ]

BPF CI testing report a UAF issue:

  [   16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003  0
  [   16.447134] #PF: supervisor read access in kernel mod  e
  [   16.447516] #PF: error_code(0x0000) - not-present pag  e
  [   16.447878] PGD 0 P4D   0
  [   16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT  I
  [   16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G           OE      6.13.0-rc3-g89e8a75fda73-dirty #4  2
  [   16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL  E
  [   16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201  4
  [   16.450201] Workqueue: smc_hs_wq smc_listen_wor  k
  [   16.450531] RIP: 0010:smc_listen_work+0xc02/0x159  0
  [   16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024  6
  [   16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030  0
  [   16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000  0
  [   16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000  5
  [   16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640  0
  [   16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092  0
  [   16.454996] FS:  0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000  0
  [   16.455557] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003  3
  [   16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef  0
  [   16.456459] PKRU: 5555555  4
  [   16.456654] Call Trace  :
  [   16.456832]  <TASK  >
  [   16.456989]  ? __die+0x23/0x7  0
  [   16.457215]  ? page_fault_oops+0x180/0x4c  0
  [   16.457508]  ? __lock_acquire+0x3e6/0x249  0
  [   16.457801]  ? exc_page_fault+0x68/0x20  0
  [   16.458080]  ? asm_exc_page_fault+0x26/0x3  0
  [   16.458389]  ? smc_listen_work+0xc02/0x159  0
  [   16.458689]  ? smc_listen_work+0xc02/0x159  0
  [   16.458987]  ? lock_is_held_type+0x8f/0x10  0
  [   16.459284]  process_one_work+0x1ea/0x6d  0
  [   16.459570]  worker_thread+0x1c3/0x38  0
  [   16.459839]  ? __pfx_worker_thread+0x10/0x1  0
  [   16.460144]  kthread+0xe0/0x11  0
  [   16.460372]  ? __pfx_kthread+0x10/0x1  0
  [   16.460640]  ret_from_fork+0x31/0x5  0
  [   16.460896]  ? __pfx_kthread+0x10/0x1  0
  [   16.461166]  ret_from_fork_asm+0x1a/0x3  0
  [   16.461453]  </TASK  >
  [   16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE)  ]
  [   16.462134] CR2: 000000000000003  0
  [   16.462380] ---[ end trace 0000000000000000 ]---
  [   16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590

The direct cause of this issue is that after smc_listen_out_connected(),
newclcsock->sk may be NULL since it will releases the smcsk. Therefore,
if the application closes the socket immediately after accept,
newclcsock->sk can be NULL. A possible execution order could be as
follows:

smc_listen_work                                 | userspace
-----------------------------------------------------------------
lock_sock(sk)                                   |
smc_listen_out_connected()                      |
| \- smc_listen_out                             |
|    | \- release_sock                          |
     | |- sk->sk_data_ready()                   |
                                                | fd = accept();
                                                | close(fd);
                                                |  \- socket->sk = NULL;
/* newclcsock->sk is NULL now */
SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk))

Since smc_listen_out_connected() will not fail, simply swapping the order
of the code can easily fix this issue.

Fixes: 3b2dec2 ("net/smc: restructure client and server code in af_smc")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20250818054618.41615-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tobetter pushed a commit that referenced this pull request Sep 2, 2025
commit 0bef512 upstream.

Based on a syzbot report, it appears many virtual
drivers do not yet use netdev_lockdep_set_classes(),
triggerring lockdep false positives.

WARNING: possible recursive locking detected
6.8.0-rc4-next-20240212-syzkaller #0 Not tainted

syz-executor.0/19016 is trying to acquire lock:
 ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
 ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline]
 ffff8880162cb298 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340

but task is already holding lock:
 ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
 ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline]
 ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
  lock(_xmit_ETHER#2);
  lock(_xmit_ETHER#2);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

9 locks held by syz-executor.0/19016:
  #0: ffffffff8f385208 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock net/core/rtnetlink.c:79 [inline]
  #0: ffffffff8f385208 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x82c/0x1040 net/core/rtnetlink.c:6603
  #1: ffffc90000a08c00 ((&in_dev->mr_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x600 kernel/time/timer.c:1697
  #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline]
  #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline]
  #2: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1360 net/ipv4/ip_output.c:228
  #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: local_bh_disable include/linux/bottom_half.h:20 [inline]
  #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: rcu_read_lock_bh include/linux/rcupdate.h:802 [inline]
  #3: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x2c4/0x3b10 net/core/dev.c:4284
  #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: spin_trylock include/linux/spinlock.h:361 [inline]
  #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: qdisc_run_begin include/net/sch_generic.h:195 [inline]
  #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_xmit_skb net/core/dev.c:3771 [inline]
  #4: ffff8880416e3258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x1262/0x3b10 net/core/dev.c:4325
  #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
  #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: __netif_tx_lock include/linux/netdevice.h:4452 [inline]
  #5: ffff8880223db4d8 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340
  #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline]
  #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline]
  #6: ffffffff8e131520 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1360 net/ipv4/ip_output.c:228
  #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: local_bh_disable include/linux/bottom_half.h:20 [inline]
  #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: rcu_read_lock_bh include/linux/rcupdate.h:802 [inline]
  #7: ffffffff8e131580 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x2c4/0x3b10 net/core/dev.c:4284
  #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: spin_trylock include/linux/spinlock.h:361 [inline]
  #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: qdisc_run_begin include/net/sch_generic.h:195 [inline]
  #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_xmit_skb net/core/dev.c:3771 [inline]
  #8: ffff888014d9d258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x1262/0x3b10 net/core/dev.c:4325

stack backtrace:
CPU: 1 PID: 19016 Comm: syz-executor.0 Not tainted 6.8.0-rc4-next-20240212-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
 <IRQ>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
  check_deadlock kernel/locking/lockdep.c:3062 [inline]
  validate_chain+0x15c1/0x58e0 kernel/locking/lockdep.c:3856
  __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137
  lock_acquire+0x1e4/0x530 kernel/locking/lockdep.c:5754
  __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
  _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
  spin_lock include/linux/spinlock.h:351 [inline]
  __netif_tx_lock include/linux/netdevice.h:4452 [inline]
  sch_direct_xmit+0x1c4/0x5f0 net/sched/sch_generic.c:340
  __dev_xmit_skb net/core/dev.c:3784 [inline]
  __dev_queue_xmit+0x1912/0x3b10 net/core/dev.c:4325
  neigh_output include/net/neighbour.h:542 [inline]
  ip_finish_output2+0xe66/0x1360 net/ipv4/ip_output.c:235
  iptunnel_xmit+0x540/0x9b0 net/ipv4/ip_tunnel_core.c:82
  ip_tunnel_xmit+0x20ee/0x2960 net/ipv4/ip_tunnel.c:831
  erspan_xmit+0x9de/0x1460 net/ipv4/ip_gre.c:720
  __netdev_start_xmit include/linux/netdevice.h:4989 [inline]
  netdev_start_xmit include/linux/netdevice.h:5003 [inline]
  xmit_one net/core/dev.c:3555 [inline]
  dev_hard_start_xmit+0x242/0x770 net/core/dev.c:3571
  sch_direct_xmit+0x2b6/0x5f0 net/sched/sch_generic.c:342
  __dev_xmit_skb net/core/dev.c:3784 [inline]
  __dev_queue_xmit+0x1912/0x3b10 net/core/dev.c:4325
  neigh_output include/net/neighbour.h:542 [inline]
  ip_finish_output2+0xe66/0x1360 net/ipv4/ip_output.c:235
  igmpv3_send_cr net/ipv4/igmp.c:723 [inline]
  igmp_ifc_timer_expire+0xb71/0xd90 net/ipv4/igmp.c:813
  call_timer_fn+0x17e/0x600 kernel/time/timer.c:1700
  expire_timers kernel/time/timer.c:1751 [inline]
  __run_timers+0x621/0x830 kernel/time/timer.c:2038
  run_timer_softirq+0x67/0xf0 kernel/time/timer.c:2051
  __do_softirq+0x2bc/0x943 kernel/softirq.c:554
  invoke_softirq kernel/softirq.c:428 [inline]
  __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633
  irq_exit_rcu+0x9/0x30 kernel/softirq.c:645
  instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1076 [inline]
  sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1076
 </IRQ>
 <TASK>
  asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
 RIP: 0010:resched_offsets_ok kernel/sched/core.c:10127 [inline]
 RIP: 0010:__might_resched+0x16f/0x780 kernel/sched/core.c:10142
Code: 00 4c 89 e8 48 c1 e8 03 48 ba 00 00 00 00 00 fc ff df 48 89 44 24 38 0f b6 04 10 84 c0 0f 85 87 04 00 00 41 8b 45 00 c1 e0 08 <01> d8 44 39 e0 0f 85 d6 00 00 00 44 89 64 24 1c 48 8d bc 24 a0 00
RSP: 0018:ffffc9000ee069e0 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8880296a9e00
RDX: dffffc0000000000 RSI: ffff8880296a9e00 RDI: ffffffff8bfe8fa0
RBP: ffffc9000ee06b00 R08: ffffffff82326877 R09: 1ffff11002b5ad1b
R10: dffffc0000000000 R11: ffffed1002b5ad1c R12: 0000000000000000
R13: ffff8880296aa23c R14: 000000000000062a R15: 1ffff92001dc0d44
  down_write+0x19/0x50 kernel/locking/rwsem.c:1578
  kernfs_activate fs/kernfs/dir.c:1403 [inline]
  kernfs_add_one+0x4af/0x8b0 fs/kernfs/dir.c:819
  __kernfs_create_file+0x22e/0x2e0 fs/kernfs/file.c:1056
  sysfs_add_file_mode_ns+0x24a/0x310 fs/sysfs/file.c:307
  create_files fs/sysfs/group.c:64 [inline]
  internal_create_group+0x4f4/0xf20 fs/sysfs/group.c:152
  internal_create_groups fs/sysfs/group.c:192 [inline]
  sysfs_create_groups+0x56/0x120 fs/sysfs/group.c:218
  create_dir lib/kobject.c:78 [inline]
  kobject_add_internal+0x472/0x8d0 lib/kobject.c:240
  kobject_add_varg lib/kobject.c:374 [inline]
  kobject_init_and_add+0x124/0x190 lib/kobject.c:457
  netdev_queue_add_kobject net/core/net-sysfs.c:1706 [inline]
  netdev_queue_update_kobjects+0x1f3/0x480 net/core/net-sysfs.c:1758
  register_queue_kobjects net/core/net-sysfs.c:1819 [inline]
  netdev_register_kobject+0x265/0x310 net/core/net-sysfs.c:2059
  register_netdevice+0x1191/0x19c0 net/core/dev.c:10298
  bond_newlink+0x3b/0x90 drivers/net/bonding/bond_netlink.c:576
  rtnl_newlink_create net/core/rtnetlink.c:3506 [inline]
  __rtnl_newlink net/core/rtnetlink.c:3726 [inline]
  rtnl_newlink+0x158f/0x20a0 net/core/rtnetlink.c:3739
  rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6606
  netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543
  netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
  netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367
  netlink_sendmsg+0xa3c/0xd70 net/netlink/af_netlink.c:1908
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg+0x221/0x270 net/socket.c:745
  __sys_sendto+0x3a4/0x4f0 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0xde/0x100 net/socket.c:2199
 do_syscall_64+0xfb/0x240
 entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7fc3fa87fa9c

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240212140700.2795436-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

2 participants