I just bought the new accucell 80W (with XT60 input connector and usb port), http://www.hobbyking.com/hobbyking/store/__64345__Turnigy_Accucel_6_80W_10A_Balancer_Charger_LiHV_Capable.html

After successfully running cheali on a clone iMax B6 I am so fond of it I want it on the turnigy as well.

Does anyone have experience with running cheali on this platform? As far as I could see there is no ISP interface. There is room for a 5 pin header at the top, it could be an ISP (haven't traced the lines yet), but is missing one pin. It does seem to have Vcc and Gnd.

So far i had no luck connecting to the USB port, since the device won't be recognized under OSX:

kernel[0]: USBF:    62715.168    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 1 of Hub at 0x14000000)
kernel[0]: USBF:    62715.168    The IOUSBFamily was not able to enumerate a device.