When a multi-byte address space access is requested, acpi_ec_read()/
acpi_ec_write() is being called multiple times.

Abort such operations if a single call to acpi_ec_read() /
acpi_ec_write() fails, as the data read from / written to the EC
might be incomplete.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If an error code other than EINVAL, ENODEV or ETIME is returned
by acpi_ec_read() / acpi_ec_write(), then AE_OK is incorrectly
returned by acpi_ec_space_handler().

Fix this by only returning AE_OK on success, and return AE_ERROR
otherwise.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

…_seq_show()

The temperature and hysteresis of a trip point may change during a
mitigation episode it is involved in (it may even become invalid
altogether), so in order to avoid possible confusion related to that,
store the temperature and hysteresis of trip points at the time they
are crossed on the way up and print those values instead of their
current temperature and hysteresis.

Fixes: 7ef01f2 ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

… trips

Commit a6258fd ("thermal/debugfs: Make tze_seq_show() skip invalid
trips and trips with no stats") modified tze_seq_show() to skip invalid
trips, but it overlooked the fact that a trip may become invalid during
a mitigation eposide involving it, in which case its statistics should
still be reported.

For this reason, remove the invalid trip temperature check from the
main loop in tze_seq_show().

The trips that have never been valid will still be skipped after this
change because there are no statistics to report for them.

Fixes: a6258fd ("thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add a helper function called thermal_trip_crossed() to be invoked by
__thermal_zone_device_update() in order to notify user space, the
thermal debug code and the zone governor about trip crossing.

Subsequently, this will also be used in the case when a trip point
becomes invalid after being crossed on the way up.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

… mitigation become invalid

When a trip point becomes invalid after being crossed on the way up,
it is involved in a mitigation episode that needs to be adjusted to
compensate for the trip going away.

For this reason, introduce thermal_zone_trip_down() as a wrapper
around thermal_trip_crossed() and make thermal_zone_set_trip_temp()
call it if the new temperature of the trip at hand is equal to
THERMAL_TEMP_INVALID and it has been crossed on the way up to trigger
all of the necessary adjustments in user space, the thermal debug
code and the zone governor.

Fixes: 8c69a77 ("thermal: core: Fix the handling of invalid trip points")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

…h CPUs

Update cpupower's P-State frequency calculation and reporting with AMD
Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due
to a change in the PStateDef MSR layout in AMD Family 1Ah+.

Tested on 4th and 5th Gen AMD EPYC system

Signed-off-by: Ananth Narayan <Ananth.Narayan@amd.com>
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Since we have a dev_is_pnp() macro that utilises the address of the
pnp_bus_type variable, the users, which can be compiled as modules,
will fail to build. Convert the macro to be a function and export it
to the modules to prevent build breakage.

Reported-by: Woody Suwalski <terraluna977@gmail.com>
Closes: https://lore.kernel.org/r/cc8a93b2-2504-9754-e26c-5d5c3bd1265c@gmail.com
Fixes: 2a49b45 ("PNP: Add dev_is_pnp() macro")
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The pnp_bus_type is defined only when CONFIG_PNP=y, while being
not guarded by ifdeffery in the header. Moreover, it's not used
outside of the PNP code. Move it to the internal header to make
sure no-one will try to (ab)use it.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The powermanagement core does various actions when a powersupply changes.
It calls into notifiers, LED triggers, other power supplies and emits an uevent.

To make sure that all these actions happen properly call power_supply_changed().

Reported-by: Rajas Paranjpe <paranjperajas@gmail.com>
Closes: MrChromebox/firmware#420 (comment)
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When extra warnings are enabled, gcc points out a global variable
definition in a header:

In file included from drivers/cpufreq/amd-pstate-ut.c:29:
include/linux/amd-pstate.h:123:27: error: 'amd_pstate_mode_string' defined but not used [-Werror=unused-const-variable=]
  123 | static const char * const amd_pstate_mode_string[] = {
      |                           ^~~~~~~~~~~~~~~~~~~~~~

This header is only included from two files in the same directory,
and one of them uses only a single definition from it, so clean it
up by moving most of the contents into the driver that uses them,
and making shared bits a local header file.

Fixes: 36c5014 ("cpufreq: amd-pstate: optimize driver working mode selection in amd_pstate_param()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The nominal frequency in cpudata is maintained in MHz whereas all other
frequencies are in KHz. This means we have to convert nominal frequency
value to KHz before we do any interaction with other frequency values.

In amd_pstate_set_boost(), this conversion from MHz to KHz is missed,
fix that.

Tested on a AMD Zen4 EPYC server

Before:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151
409422

After:
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq
2151000
$ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq
400000
$ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq
2151000
1799527

Fixes: ec437d7 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors")
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Peter Jung <ptr1337@cachyos.org>
Cc: 5.17+ <stable@vger.kernel.org> # 5.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

…inux/kernel/git/shuah/linux into pm-tools

Merge cpupower utility fix for 6.10-rc2 from Shuah Khan:

"This cpupower fixes update for Linux 6.10-rc2 consists of one single
 fix to cpupower's P-State frequency calculation and reporting with
 AMD Family 1Ah+ processors, when using the acpi-cpufreq driver."

* tag 'linux-cpupower-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
  tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs

Fix unchecked MSR access error for processors with no HWP support. On
such processors, maximum frequency can be changed by the system firmware
using ACPI event ACPI_PROCESSOR_NOTIFY_HIGEST_PERF_CHANGED. This results
in accessing HWP MSR 0x771.

Call Trace:
	<TASK>
	generic_exec_single+0x58/0x120
	smp_call_function_single+0xbf/0x110
	rdmsrl_on_cpu+0x46/0x60
	intel_pstate_get_hwp_cap+0x1b/0x70
	intel_pstate_update_limits+0x2a/0x60
	acpi_processor_notify+0xb7/0x140
	acpi_ev_notify_dispatch+0x3b/0x60

HWP MSR 0x771 can be only read on a CPU which supports HWP and enabled.
Hence intel_pstate_get_hwp_cap() can only be called when hwp_active is
true.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-pm/20240529155740.Hq2Hw7be@linutronix.de/
Fixes: e8217b4 ("cpufreq: intel_pstate: Update the maximum CPU frequency consistently")
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge ACPI EC driver fixes, an ACPI APEI fix and PNP fixes for
6.10-rc3:

 - Fix error handling during EC operation region accesses in the ACPI EC
   driver (Armin Wolf).

 - Fix a memory leak in the APEI error injection driver introduced
   during its converion to a platform driver (Dan Williams).

 - Fix build failures related to the dev_is_pnp() macro by redefining it
   as a proper function and exporting it to modules as appropriate and
   unexport pnp_bus_type which need not be exported any more (Andy
   Shevchenko).

* acpi-ec:
  ACPI: EC: Avoid returning AE_OK on errors in address space handler
  ACPI: EC: Abort address space access upon error

* acpi-apei:
  ACPI: APEI: EINJ: Fix einj_dev release leak

* pnp:
  PNP: Hide pnp_bus_type from the non-PNP code
  PNP: Make dev_is_pnp() to be a function and export it for modules

Merge cpufreq fixes for 6.10-rc3:

 - Fix a recently introduced unchecked HWP MSR access in the
   intel_pstate driver (Srinivas Pandruvada).

 - Add missing conversion from MHz to KHz to amd_pstate_set_boost()
   to address sysfs inteface inconsistency (Dhananjay Ugwekar).

 - Get rid of an excess global header file used by the amd-pstate
   cpufreq driver (Arnd Bergmann).

* pm-cpufreq:
  cpufreq: intel_pstate: Fix unchecked HWP MSR access
  cpufreq: amd-pstate: Fix the inconsistency in max frequency units
  cpufreq: amd-pstate: remove global header file

…git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix the intel_pstate and amd-pstate cpufreq drivers and the
  cpupower utility.

  Specifics:

   - Fix a recently introduced unchecked HWP MSR access in the
     intel_pstate driver (Srinivas Pandruvada)

   - Add missing conversion from MHz to KHz to amd_pstate_set_boost() to
     address sysfs inteface inconsistency and fix P-state frequency
     reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
     Ugwekar)

   - Get rid of an excess global header file used by the amd-pstate
     cpufreq driver (Arnd Bergmann)"

* tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Fix unchecked HWP MSR access
  cpufreq: amd-pstate: Fix the inconsistency in max frequency units
  cpufreq: amd-pstate: remove global header file
  tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs

…l/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
 "These fix the ACPI EC and AC drivers, the ACPI APEI error injection
  driver and build issues related to the dev_is_pnp() macro referring to
  pnp_bus_type that is not exported to modules.

  Specifics:

   - Fix error handling during EC operation region accesses in the ACPI
     EC driver (Armin Wolf)

   - Fix a memory leak in the APEI error injection driver introduced
     during its converion to a platform driver (Dan Williams)

   - Fix build failures related to the dev_is_pnp() macro by redefining
     it as a proper function and exporting it to modules as appropriate
     and unexport pnp_bus_type which need not be exported any more (Andy
     Shevchenko)

   - Update the ACPI AC driver to use power_supply_changed() to let the
     power supply core handle configuration changes properly (Thomas
     Weißschuh)"

* tag 'acpi-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: AC: Properly notify powermanagement core about changes
  PNP: Hide pnp_bus_type from the non-PNP code
  PNP: Make dev_is_pnp() to be a function and export it for modules
  ACPI: EC: Avoid returning AE_OK on errors in address space handler
  ACPI: EC: Abort address space access upon error
  ACPI: APEI: EINJ: Fix einj_dev release leak

…rnel/git/rafael/linux-pm

Pull thermal control fixes from Rafael Wysocki:
 "Fix issues related to the handling of invalid trip points in the
  thermal core and in the thermal debug code that have been overlooked
  by some recent thermal control core changes"

* tag 'thermal-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: trip: Trigger trip down notifications when trips involved in mitigation become invalid
  thermal: core: Introduce thermal_trip_crossed()
  thermal/debugfs: Allow tze_seq_show() to print statistics for invalid trips
  thermal/debugfs: Print initial trip temperature and hysteresis in tze_seq_show()