Daniel Petre reported crashes in icmp_dst_unreach() with following call
graph:

#3 [ffff88003fc03938] __stack_chk_fail at ffffffff81037f77
#4 [ffff88003fc03948] icmp_send at ffffffff814d5fec
#5 [ffff88003fc03ae8] ipv4_link_failure at ffffffff814a1795
#6 [ffff88003fc03af8] ipgre_tunnel_xmit at ffffffff814e7965
#7 [ffff88003fc03b78] dev_hard_start_xmit at ffffffff8146e032
#8 [ffff88003fc03bc8] sch_direct_xmit at ffffffff81487d66
#9 [ffff88003fc03c08] __qdisc_run at ffffffff81487efd
#10 [ffff88003fc03c48] dev_queue_xmit at ffffffff8146e5a7
#11 [ffff88003fc03c88] ip_finish_output at ffffffff814ab596

Daniel found a similar problem mentioned in
 http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html

And indeed this is the root cause : skb->cb[] contains data fooling IP
stack.

We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure()
is called. Or else skb->cb[] might contain garbage from GSO segmentation
layer.

A similar fix was tested on linux-3.9, but gre code was refactored in
linux-3.10. I'll send patches for stable kernels as well.

Many thanks to Daniel for providing reports, patches and testing !

Reported-by: Daniel Petre <daniel.petre@rcs-rds.ro>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Several people reported the warning: "kernel BUG at kernel/timer.c:729!"
and the stack trace is:

	#7 [ffff880214d25c10] mod_timer+501 at ffffffff8106d905
	#8 [ffff880214d25c50] br_multicast_del_pg.isra.20+261 at ffffffffa0731d25 [bridge]
	#9 [ffff880214d25c80] br_multicast_disable_port+88 at ffffffffa0732948 [bridge]
	#10 [ffff880214d25cb0] br_stp_disable_port+154 at ffffffffa072bcca [bridge]
	#11 [ffff880214d25ce8] br_device_event+520 at ffffffffa072a4e8 [bridge]
	#12 [ffff880214d25d18] notifier_call_chain+76 at ffffffff8164aafc
	#13 [ffff880214d25d50] raw_notifier_call_chain+22 at ffffffff810858f6
	#14 [ffff880214d25d60] call_netdevice_notifiers+45 at ffffffff81536aad
	#15 [ffff880214d25d80] dev_close_many+183 at ffffffff81536d17
	#16 [ffff880214d25dc0] rollback_registered_many+168 at ffffffff81537f68
	#17 [ffff880214d25de8] rollback_registered+49 at ffffffff81538101
	#18 [ffff880214d25e10] unregister_netdevice_queue+72 at ffffffff815390d8
	#19 [ffff880214d25e30] __tun_detach+272 at ffffffffa074c2f0 [tun]
	#20 [ffff880214d25e88] tun_chr_close+45 at ffffffffa074c4bd [tun]
	#21 [ffff880214d25ea8] __fput+225 at ffffffff8119b1f1
	#22 [ffff880214d25ef0] ____fput+14 at ffffffff8119b3fe
	#23 [ffff880214d25f00] task_work_run+159 at ffffffff8107cf7f
	#24 [ffff880214d25f30] do_notify_resume+97 at ffffffff810139e1
	#25 [ffff880214d25f50] int_signal+18 at ffffffff8164f292

this is due to I forgot to check if mp->timer is armed in
br_multicast_del_pg(). This bug is introduced by
commit 9f00b2e (bridge: only expire the mdb entry
when query is received).

Same for __br_mdb_del().

Tested-by: poma <pomidorabelisima@gmail.com>
Reported-by: LiYonghua <809674045@qq.com>
Reported-by: Robert Hancock <hancockrwd@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

…s struct file

The following call chain:
------------------------------------------------------------
nfs4_get_vfs_file
- nfsd_open
  - dentry_open
    - do_dentry_open
      - __get_file_write_access
        - get_write_access
          - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
------------------------------------------------------------

can result in the following state:
------------------------------------------------------------
struct nfs4_file {
...
  fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0},
  fi_access = {{
      counter = 0x1
    }, {
      counter = 0x0
    }},
...
------------------------------------------------------------

1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NULL, hence nfsd_open() is called where we get status set to an error
and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach
nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented.

2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but
nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented.
Thus we leave a landmine in the form of the nfs4_file data structure in
an incorrect state.

3) Eventually, when __nfs4_file_put_access() is called it finds
fi_access[O_WRONLY] being non-zero, it decrements it and calls
nfs4_file_put_fd() which tries to fput -ETXTBSY.
------------------------------------------------------------
...
     [exception RIP: fput+0x9]
     RIP: ffffffff81177fa9  RSP: ffff88062e365c90  RFLAGS: 00010282
     RAX: ffff880c2b3d99cc  RBX: ffff880c2b3d9978  RCX: 0000000000000002
     RDX: dead000000100101  RSI: 0000000000000001  RDI: ffffffffffffffe6
     RBP: ffff88062e365c90   R8: ffff88041fe797d8   R9: ffff88062e365d58
     R10: 0000000000000008  R11: 0000000000000000  R12: 0000000000000001
     R13: 0000000000000007  R14: 0000000000000000  R15: 0000000000000000
     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd]
 #10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd]
 #11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd]
 #12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd]
 #13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd]
 #14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd]
 #15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd]
 #16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc]
 #17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc]
 #18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd]
 #19 [ffff88062e365ee8] kthread at ffffffff81090886
 #20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a
------------------------------------------------------------

Cc: stable@vger.kernel.org
Signed-off-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

In several places, this snippet is used when removing neigh entries:

	list_del(&neigh->list);
	ipoib_neigh_free(neigh);

The list_del() removes neigh from the associated struct ipoib_path, while
ipoib_neigh_free() removes neigh from the device's neigh entry lookup
table.  Both of these operations are protected by the priv->lock
spinlock.  The table however is also protected via RCU, and so naturally
the lock is not held when doing reads.

This leads to a race condition, in which a thread may successfully look
up a neigh entry that has already been deleted from neigh->list.  Since
the previous deletion will have marked the entry with poison, a second
list_del() on the object will cause a panic:

  #5 [ffff8802338c3c70] general_protection at ffffffff815108c5
     [exception RIP: list_del+16]
     RIP: ffffffff81289020  RSP: ffff8802338c3d20  RFLAGS: 00010082
     RAX: dead000000200200  RBX: ffff880433e60c88  RCX: 0000000000009e6c
     RDX: 0000000000000246  RSI: ffff8806012ca298  RDI: ffff880433e60c88
     RBP: ffff8802338c3d30   R8: ffff8806012ca2e8   R9: 00000000ffffffff
     R10: 0000000000000001  R11: 0000000000000000  R12: ffff8804346b2020
     R13: ffff88032a3e7540  R14: ffff8804346b26e0  R15: 0000000000000246
     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
  #6 [ffff8802338c3d38] ipoib_cm_tx_handler at ffffffffa066fe0a [ib_ipoib]
  #7 [ffff8802338c3d98] cm_process_work at ffffffffa05149a7 [ib_cm]
  #8 [ffff8802338c3de8] cm_work_handler at ffffffffa05161aa [ib_cm]
  #9 [ffff8802338c3e38] worker_thread at ffffffff81090e10
 #10 [ffff8802338c3ee8] kthread at ffffffff81096c66
 #11 [ffff8802338c3f48] kernel_thread at ffffffff8100c0ca

We move the list_del() into ipoib_neigh_free(), so that deletion happens
only once, after the entry has been successfully removed from the lookup
table.  This same behavior is already used in ipoib_del_neighs_by_gid()
and __ipoib_reap_neigh().

Signed-off-by: Jim Foraker <foraker1@llnl.gov>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Reviewed-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

When booting secondary CPUs, announce_cpu() is called to show which cpu has
been brought up. For example:

[    0.402751] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 OK
[    0.525667] smpboot: Booting Node   1, Processors  #6 #7 #8 #9 #10 #11 OK
[    0.755592] smpboot: Booting Node   0, Processors  #12 #13 #14 #15 #16 #17 OK
[    0.890495] smpboot: Booting Node   1, Processors  #18 #19 #20 #21 #22 #23

But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum
possible cpu id. It should use the maximum present cpu id in case not all
CPUs booted up.

Signed-off-by: Libin <huawei.libin@huawei.com>
Cc: <guohanjun@huawei.com>
Cc: <wangyijing@huawei.com>
Cc: <fenghua.yu@intel.com>
Cc: <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com
[ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

When parsing lines from objdump a line containing source code starting
with a numeric label is mistaken for a line of disassembly starting with
a memory address.

Current validation fails to recognise that the "memory address" is out
of range and calculates an invalid offset which later causes this
segfault:

Program received signal SIGSEGV, Segmentation fault.
0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50)
    at util/annotate.c:631
631				hits += h->addr[offset++];
(gdb) bt
 #0  0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50)
    at util/annotate.c:631
 #1  0x00000000004d65e3 in annotate_browser__calc_percent (browser=0x7fffffffd130, evsel=0xa01da0) at ui/browsers/annotate.c:364
 #2  0x00000000004d7433 in annotate_browser__run (browser=0x7fffffffd130, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:672
 #3  0x00000000004d80c9 in symbol__tui_annotate (sym=0xc989a0, map=0xa02660, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:962
 #4  0x00000000004d7aa0 in hist_entry__tui_annotate (he=0xdf73f0, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:823
 #5  0x00000000004dd648 in perf_evsel__hists_browse (evsel=0xa01da0, nr_events=1, helpline=
    0x58b768 "For a higher level overview, try: perf report --sort comm,dso", ev_name=0xa02cd0 "cycles", left_exits=false, hbt=
    0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1659
 #6  0x00000000004de372 in perf_evlist__tui_browse_hists (evlist=0xa01520, help=
    0x58b768 "For a higher level overview, try: perf report --sort comm,dso", hbt=0x0, min_pcnt=0, env=0xa011e0)
    at ui/browsers/hists.c:1950
 #7  0x000000000042cf6b in __cmd_report (rep=0x7fffffffd6c0) at builtin-report.c:581
 #8  0x000000000042e25d in cmd_report (argc=0, argv=0x7fffffffe4b0, prefix=0x0) at builtin-report.c:965
 #9  0x000000000041a0e1 in run_builtin (p=0x801548, argc=1, argv=0x7fffffffe4b0) at perf.c:319
 #10 0x000000000041a319 in handle_internal_command (argc=1, argv=0x7fffffffe4b0) at perf.c:376
 #11 0x000000000041a465 in run_argv (argcp=0x7fffffffe38c, argv=0x7fffffffe380) at perf.c:420
 #12 0x000000000041a707 in main (argc=1, argv=0x7fffffffe4b0) at perf.c:521

After the fix is applied the symbol can be annotated showing the
problematic line "1:      rep"

copy_user_generic_string  /usr/lib/debug/lib/modules/3.9.10-100.fc17.x86_64/vmlinux
             */
            ENTRY(copy_user_generic_string)
                    CFI_STARTPROC
                    ASM_STAC
                    andl %edx,%edx
              and    %edx,%edx
                    jz 4f
              je     37
                    cmpl $8,%edx
              cmp    $0x8,%edx
                    jb 2f           /* less than 8 bytes, go to byte copy loop */
              jb     33
                    ALIGN_DESTINATION
              mov    %edi,%ecx
              and    $0x7,%ecx
              je     28
              sub    $0x8,%ecx
              neg    %ecx
              sub    %ecx,%edx
        1a:   mov    (%rsi),%al
              mov    %al,(%rdi)
              inc    %rsi
              inc    %rdi
              dec    %ecx
              jne    1a
                    movl %edx,%ecx
        28:   mov    %edx,%ecx
                    shrl $3,%ecx
              shr    $0x3,%ecx
                    andl $7,%edx
              and    $0x7,%edx
            1:      rep
100.00        rep    movsq %ds:(%rsi),%es:(%rdi)
                    movsq
            2:      movl %edx,%ecx
        33:   mov    %edx,%ecx
            3:      rep
              rep    movsb %ds:(%rsi),%es:(%rdi)
                    movsb
            4:      xorl %eax,%eax
        37:   xor    %eax,%eax
              data32 xchg %ax,%ax
                    ASM_CLAC
                    ret
              retq

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379009721-27667-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

…ux/kernel/git/tip/tip

Pull x86 boot changes from Ingo Molnar:
 "Two changes that prettify and compactify the SMP bootup output from:

     smpboot: Booting Node   0, Processors  #1 #2 #3 OK
     smpboot: Booting Node   1, Processors  #4 #5 #6 #7 OK
     smpboot: Booting Node   2, Processors  #8 #9 #10 #11 OK
     smpboot: Booting Node   3, Processors  #12 #13 #14 #15 OK
     Brought up 16 CPUs

  to something like:

     x86: Booting SMP configuration:
     .... node  #0, CPUs:        #1  #2  #3
     .... node  #1, CPUs:    #4  #5  #6  #7
     .... node  #2, CPUs:    #8  #9 #10 #11
     .... node  #3, CPUs:   #12 #13 #14 #15
     x86: Booted up 4 nodes, 16 CPUs"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Further compress CPUs bootup message
  x86: Improve the printout of the SMP bootup CPU table

commit ec183d2 upstream.

Fixes segmentation fault using, for instance:

  (gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".

 Program received signal SIGSEGV, Segmentation fault.
  0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
  (gdb) bt
  #0  0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
  #1  0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:433
  #2  0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:498
  #3  0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:936
  #4  0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391
  #5  0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361
  #6  0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401
  #7  0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253
  #8  0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364
  #9  0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664
  #10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539
  #11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264
  #12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390
  #13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451
  #14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495
  #15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618
(gdb)

Intel PT attempts to find the sched:sched_switch tracepoint but that seg
faults if tracefs is not readable, because the error reporting structure
is null, as errors are not reported when automatically adding
tracepoints.  Fix by checking before using.

Committer note:

This doesn't take place in a kernel that supports
perf_event_attr.context_switch, that is the default way that will be
used for tracking context switches, only in older kernels, like 4.2, in
a machine with Intel PT (e.g. Broadwell) for non-priviledged users.

Further info from a similar patch by Wang:

The error is in tracepoint_error: it assumes the 'e' parameter is valid.

However, there are many situation a parse_event() can be called without
parse_events_error. See result of

  $ grep 'parse_events(.*NULL)' ./tools/perf/ -r'

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Tong Zhang <ztong@vt.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 1965817 ("perf tools: Enhance parsing events tracepoint error output")
Link: http://lkml.kernel.org/r/1453809921-24596-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b6bc1c7 upstream.

Function ib_create_qp() was failing to return an error when
rdma_rw_init_mrs() fails, causing a crash further down in ib_create_qp()
when trying to dereferece the qp pointer which was actually a negative
errno.

The crash:

crash> log|grep BUG
[  136.458121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
crash> bt
PID: 3736   TASK: ffff8808543215c0  CPU: 2   COMMAND: "kworker/u64:2"
 #0 [ffff88084d323340] machine_kexec at ffffffff8105fbb0
 #1 [ffff88084d3233b0] __crash_kexec at ffffffff81116758
 #2 [ffff88084d323480] crash_kexec at ffffffff8111682d
 #3 [ffff88084d3234b0] oops_end at ffffffff81032bd6
 #4 [ffff88084d3234e0] no_context at ffffffff8106e431
 #5 [ffff88084d323530] __bad_area_nosemaphore at ffffffff8106e610
 #6 [ffff88084d323590] bad_area_nosemaphore at ffffffff8106e6f4
 #7 [ffff88084d3235a0] __do_page_fault at ffffffff8106ebdc
 #8 [ffff88084d323620] do_page_fault at ffffffff8106f057
 #9 [ffff88084d323660] page_fault at ffffffff816e3148
    [exception RIP: ib_create_qp+427]
    RIP: ffffffffa02554fb  RSP: ffff88084d323718  RFLAGS: 00010246
    RAX: 0000000000000004  RBX: fffffffffffffff4  RCX: 000000018020001f
    RDX: ffff880830997fc0  RSI: 0000000000000001  RDI: ffff88085f407200
    RBP: ffff88084d323778   R8: 0000000000000001   R9: ffffea0020bae210
    R10: ffffea0020bae218  R11: 0000000000000001  R12: ffff88084d3237c8
    R13: 00000000fffffff4  R14: ffff880859fa5000  R15: ffff88082eb89800
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
#10 [ffff88084d323780] rdma_create_qp at ffffffffa0782681 [rdma_cm]
#11 [ffff88084d3237b0] nvmet_rdma_create_queue_ib at ffffffffa07c43f3 [nvmet_rdma]
#12 [ffff88084d323860] nvmet_rdma_alloc_queue at ffffffffa07c5ba9 [nvmet_rdma]
#13 [ffff88084d323900] nvmet_rdma_queue_connect at ffffffffa07c5c96 [nvmet_rdma]
#14 [ffff88084d323980] nvmet_rdma_cm_handler at ffffffffa07c6450 [nvmet_rdma]
#15 [ffff88084d3239b0] iw_conn_req_handler at ffffffffa0787480 [rdma_cm]
#16 [ffff88084d323a60] cm_conn_req_handler at ffffffffa0775f06 [iw_cm]
#17 [ffff88084d323ab0] process_event at ffffffffa0776019 [iw_cm]
#18 [ffff88084d323af0] cm_work_handler at ffffffffa0776170 [iw_cm]
#19 [ffff88084d323cb0] process_one_work at ffffffff810a1483
#20 [ffff88084d323d90] worker_thread at ffffffff810a211d
#21 [ffff88084d323ec0] kthread at ffffffff810a6c5c
#22 [ffff88084d323f50] ret_from_fork at ffffffff816e1ebf

Fixes: 632bc3f ("IB/core, RDMA RW API: Do not exceed QP SGE send limit")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4dfce57 upstream.

There have been several reports over the years of NULL pointer
dereferences in xfs_trans_log_inode during xfs_fsr processes,
when the process is doing an fput and tearing down extents
on the temporary inode, something like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
PID: 29439  TASK: ffff880550584fa0  CPU: 6   COMMAND: "xfs_fsr"
    [exception RIP: xfs_trans_log_inode+0x10]
 #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs]
#10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs]
#11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs]
#12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs]
#13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs]
#14 [ffff8800a57bbe00] evict at ffffffff811e1b67
#15 [ffff8800a57bbe28] iput at ffffffff811e23a5
#16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8
#17 [ffff8800a57bbe88] dput at ffffffff811dd06c
#18 [ffff8800a57bbea8] __fput at ffffffff811c823b
#19 [ffff8800a57bbef0] ____fput at ffffffff811c846e
#20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27
#21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c
#22 [ffff8800a57bbf50] int_signal at ffffffff8161405d

As it turns out, this is because the i_itemp pointer, along
with the d_ops pointer, has been overwritten with zeros
when we tear down the extents during truncate.  When the in-core
inode fork on the temporary inode used by xfs_fsr was originally
set up during the extent swap, we mistakenly looked at di_nextents
to determine whether all extents fit inline, but this misses extents
generated by speculative preallocation; we should be using if_bytes
instead.

This mistake corrupts the in-memory inode, and code in
xfs_iext_remove_inline eventually gets bad inputs, causing
it to memmove and memset incorrect ranges; this became apparent
because the two values in ifp->if_u2.if_inline_ext[1] contained
what should have been in d_ops and i_itemp; they were memmoved due
to incorrect array indexing and then the original locations
were zeroed with memset, again due to an array overrun.

Fix this by properly using i_df.if_bytes to determine the number
of extents, not di_nextents.

Thanks to dchinner for looking at this with me and spotting the
root cause.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d1f1c0e upstream.

Starting with commit d94a461 ("ath9k: use ieee80211_tx_status_noskb
where possible") the driver uses rcu_read_lock() && rcu_read_unlock(), yet on
returning early in ath_tx_edma_tasklet() the unlock is missing leading to stalls
and suspicious RCU usage:

 ===============================
 [ INFO: suspicious RCU usage. ]
 4.9.0-rc8 #11 Not tainted
 -------------------------------
 kernel/rcu/tree.c:705 Illegal idle entry in RCU read-side critical section.!

 other info that might help us debug this:

 RCU used illegally from idle CPU!
 rcu_scheduler_active = 1, debug_locks = 0
 RCU used illegally from extended quiescent state!
 1 lock held by swapper/7/0:
 #0:
  (
 rcu_read_lock
 ){......}
 , at:
 [<ffffffffa06ed110>] ath_tx_edma_tasklet+0x0/0x450 [ath9k]

 stack backtrace:
 CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.0-rc8 #11
 Hardware name: Acer Aspire V3-571G/VA50_HC_CR, BIOS V2.21 12/16/2013
  ffff88025efc3f38 ffffffff8132b1e5 ffff88017ede4540 0000000000000001
  ffff88025efc3f68 ffffffff810a25f7 ffff88025efcee60 ffff88017edebdd8
  ffff88025eeb5400 0000000000000091 ffff88025efc3f88 ffffffff810c3cd4
 Call Trace:
  <IRQ>
  [<ffffffff8132b1e5>] dump_stack+0x68/0x93
  [<ffffffff810a25f7>] lockdep_rcu_suspicious+0xd7/0x110
  [<ffffffff810c3cd4>] rcu_eqs_enter_common.constprop.85+0x154/0x200
  [<ffffffff810c5a54>] rcu_irq_exit+0x44/0xa0
  [<ffffffff81058631>] irq_exit+0x61/0xd0
  [<ffffffff81018d25>] do_IRQ+0x65/0x110
  [<ffffffff81672189>] common_interrupt+0x89/0x89
  <EOI>
  [<ffffffff814ffe11>] ? cpuidle_enter_state+0x151/0x200
  [<ffffffff814ffee2>] cpuidle_enter+0x12/0x20
  [<ffffffff8109a6ae>] call_cpuidle+0x1e/0x40
  [<ffffffff8109a8f6>] cpu_startup_entry+0x146/0x220
  [<ffffffff810336f8>] start_secondary+0x148/0x170

Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Fixes: d94a461 ("ath9k: use ieee80211_tx_status_noskb where possible")
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 45caeaa ]

As Eric Dumazet pointed out this also needs to be fixed in IPv6.
v2: Contains the IPv6 tcp/Ipv6 dccp patches as well.

We have seen a few incidents lately where a dst_enty has been freed
with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that
dst_entry. If the conditions/timings are right a crash then ensues when the
freed dst_entry is referenced later on. A Common crashing back trace is:

 #8 [] page_fault at ffffffff8163e648
    [exception RIP: __tcp_ack_snd_check+74]
.
.
 #9 [] tcp_rcv_established at ffffffff81580b64
#10 [] tcp_v4_do_rcv at ffffffff8158b54a
#11 [] tcp_v4_rcv at ffffffff8158cd02
#12 [] ip_local_deliver_finish at ffffffff815668f4
#13 [] ip_local_deliver at ffffffff81566bd9
#14 [] ip_rcv_finish at ffffffff8156656d
#15 [] ip_rcv at ffffffff81566f06
#16 [] __netif_receive_skb_core at ffffffff8152b3a2
#17 [] __netif_receive_skb at ffffffff8152b608
#18 [] netif_receive_skb at ffffffff8152b690
#19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3]
#20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3]
#21 [] net_rx_action at ffffffff8152bac2
#22 [] __do_softirq at ffffffff81084b4f
#23 [] call_softirq at ffffffff8164845c
#24 [] do_softirq at ffffffff81016fc5
#25 [] irq_exit at ffffffff81084ee5
#26 [] do_IRQ at ffffffff81648ff8

Of course it may happen with other NIC drivers as well.

It's found the freed dst_entry here:

 224 static bool tcp_in_quickack_mode(struct sock *sk)↩
 225 {↩
 226 ▹       const struct inet_connection_sock *icsk = inet_csk(sk);↩
 227 ▹       const struct dst_entry *dst = __sk_dst_get(sk);↩
 228 ↩
 229 ▹       return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩
 230 ▹       ▹       (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩
 231 }↩

But there are other backtraces attributed to the same freed dst_entry in
netfilter code as well.

All the vmcores showed 2 significant clues:

- Remote hosts behind the default gateway had always been redirected to a
different gateway. A rtable/dst_entry will be added for that host. Making
more dst_entrys with lower reference counts. Making this more probable.

- All vmcores showed a postitive LockDroppedIcmps value, e.g:

LockDroppedIcmps                  267

A closer look at the tcp_v4_err() handler revealed that do_redirect() will run
regardless of whether user space has the socket locked. This can result in a
race condition where the same dst_entry cached in sk->sk_dst_entry can be
decremented twice for the same socket via:

do_redirect()->__sk_dst_check()-> dst_release().

Which leads to the dst_entry being prematurely freed with another socket
pointing to it via sk->sk_dst_cache and a subsequent crash.

To fix this skip do_redirect() if usespace has the socket locked. Instead let
the redirect take place later when user space does not have the socket
locked.

The dccp/IPv6 code is very similar in this respect, so fixing it there too.

As Eric Garver pointed out the following commit now invalidates routes. Which
can set the dst->obsolete flag so that ipv4_dst_check() returns null and
triggers the dst_release().

Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.")
Cc: Eric Garver <egarver@redhat.com>
Cc: Hannes Sowa <hsowa@redhat.com>
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mipsxx_pmu_handle_shared_irq() calls irq_work_run() while holding the
pmuint_rwlock for read.  irq_work_run() can, via perf_pending_event(),
call try_to_wake_up() which can try to take rq->lock.

However, perf can also call perf_pmu_enable() (and thus take the
pmuint_rwlock for write) while holding the rq->lock, from
finish_task_switch() via perf_event_context_sched_in().

This leads to an ABBA deadlock:

 PID: 3855   TASK: 8f7ce288  CPU: 2   COMMAND: "process"
  #0 [89c39ac8] __delay at 803b5be4
  #1 [89c39ac8] do_raw_spin_lock at 8008fdcc
  #2 [89c39af8] try_to_wake_up at 8006e47c
  #3 [89c39b38] pollwake at 8018eab0
  #4 [89c39b68] __wake_up_common at 800879f4
  #5 [89c39b98] __wake_up at 800880e4
  #6 [89c39bc8] perf_event_wakeup at 8012109c
  #7 [89c39be8] perf_pending_event at 80121184
  #8 [89c39c08] irq_work_run_list at 801151f0
  #9 [89c39c38] irq_work_run at 80115274
 #10 [89c39c50] mipsxx_pmu_handle_shared_irq at 8002cc7c

 PID: 1481   TASK: 8eaac6a8  CPU: 3   COMMAND: "process"
  #0 [8de7f900] do_raw_write_lock at 800900e0
  #1 [8de7f918] perf_event_context_sched_in at 80122310
  #2 [8de7f938] __perf_event_task_sched_in at 80122608
  #3 [8de7f958] finish_task_switch at 8006b8a4
  #4 [8de7f998] __schedule at 805e4dc4
  #5 [8de7f9f8] schedule at 805e5558
  #6 [8de7fa10] schedule_hrtimeout_range_clock at 805e9984
  #7 [8de7fa70] poll_schedule_timeout at 8018e8f8
  #8 [8de7fa88] do_select at 8018f338
  #9 [8de7fd88] core_sys_select at 8018f5cc
 #10 [8de7fee0] sys_select at 8018f854
 #11 [8de7ff28] syscall_common at 80028fc8

The lock seems to be there to protect the hardware counters so there is
no need to hold it across irq_work_run().

Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We must avoid any recursion into lockdep if KCSAN is enabled on utilities
used by lockdep. One manifestation of this is corruption of lockdep's
IRQ trace state (if TRACE_IRQFLAGS), resulting in spurious warnings
(see below).  This commit fixes this by:

1. Using raw_local_irq{save,restore} in kcsan_setup_watchpoint().
2. Disabling lockdep in kcsan_report().

Tested with:

  CONFIG_LOCKDEP=y
  CONFIG_DEBUG_LOCKDEP=y
  CONFIG_TRACE_IRQFLAGS=y

This fix eliminates spurious warnings such as the following one:

    WARNING: CPU: 0 PID: 2 at kernel/locking/lockdep.c:4406 check_flags.part.0+0x101/0x220
    Modules linked in:
    CPU: 0 PID: 2 Comm: kthreadd Not tainted 5.5.0-rc1+ #11
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
    RIP: 0010:check_flags.part.0+0x101/0x220
    <snip>
    Call Trace:
     lock_is_held_type+0x69/0x150
     freezer_fork+0x20b/0x370
     cgroup_post_fork+0x2c9/0x5c0
     copy_process+0x2675/0x3b40
     _do_fork+0xbe/0xa30
     ? _raw_spin_unlock_irqrestore+0x40/0x50
     ? match_held_lock+0x56/0x250
     ? kthread_park+0xf0/0xf0
     kernel_thread+0xa6/0xd0
     ? kthread_park+0xf0/0xf0
     kthreadd+0x321/0x3d0
     ? kthread_create_on_cpu+0x130/0x130
     ret_from_fork+0x3a/0x50
    irq event stamp: 64
    hardirqs last  enabled at (63): [<ffffffff9a7995d0>] _raw_spin_unlock_irqrestore+0x40/0x50
    hardirqs last disabled at (64): [<ffffffff992a96d2>] kcsan_setup_watchpoint+0x92/0x460
    softirqs last  enabled at (32): [<ffffffff990489b8>] fpu__copy+0xe8/0x470
    softirqs last disabled at (30): [<ffffffff99048939>] fpu__copy+0x69/0x470

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:

    Direct leak of 28 byte(s) in 4 object(s) allocated from:
        #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
        #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
        #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
        #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
        #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
        #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
        #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
        #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
        #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
        #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
        #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
        #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
        #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
        #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
        #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
        #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
        #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
        #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
        #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
        #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
        #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
        #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
        #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
        #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
        #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
        #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
        #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)

The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.

Free the token variable before calling read_token in order to plug the
leak.

Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following deadlock was captured. The first process is holding 'kernfs_mutex'
and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device,
this pending bio list would be flushed by second process 'md127_raid1', but
it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace
sysfs_notify() can fix it. There were other sysfs_notify() invoked from io
path, removed all of them.

 PID: 40430  TASK: ffff8ee9c8c65c40  CPU: 29  COMMAND: "probe_file"
  #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec
  #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06
  #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6
  #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs]
  #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs]
  #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs]
  #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs]
  #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs]
  #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs]
  #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7
 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93
 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968
 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2
 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445
 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f
 #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a
 #16 [ffffb87c4df37958] new_slab at ffffffff9a251430
 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85
 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d
 #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89
 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10
 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854
 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377
 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b
 #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118
 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83
 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619
 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af
 #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566
 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787
 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d
 #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e
 #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949
 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad
     RIP: 00007f617a5f2905  RSP: 00007f607334f838  RFLAGS: 00000246
     RAX: ffffffffffffffda  RBX: 00007f6064044b20  RCX: 00007f617a5f2905
     RDX: 00007f6064044b20  RSI: 00007f6064044b20  RDI: 00007f6064005890
     RBP: 00007f6064044aa0   R8: 0000000000000030   R9: 000000000000011c
     R10: 0000000000000013  R11: 0000000000000246  R12: 00007f606417e6d0
     R13: 00007f6064044aa0  R14: 00007f6064044b10  R15: 00000000ffffffff
     ORIG_RAX: 0000000000000006  CS: 0033  SS: 002b

 PID: 927    TASK: ffff8f15ac5dbd80  CPU: 42  COMMAND: "md127_raid1"
  #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec
  #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06
  #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e
  #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc
  #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013
  #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f
  #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83
  #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a
  #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696
  #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5
 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c
 #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1]
 #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348
 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005
 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

This patch is to fix a crash:

 #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2
 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7
 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e
    [exception RIP: f2fs_is_compressed_page+34]
    RIP: ffffffffa2ba83a2  RSP: ffffb6580689f9d8  RFLAGS: 00010213
    RAX: 0000000000000001  RBX: fffffc0f50b34bc0  RCX: 0000000000002122
    RDX: 0000000000002123  RSI: 0000000000000c00  RDI: fffffc0f50b34bc0
    RBP: ffff97e815a40178   R8: 0000000000000000   R9: ffff97e83ffc9000
    R10: 0000000000032300  R11: 0000000000032380  R12: ffffb6580689fa38
    R13: fffffc0f50b34bc0  R14: ffff97e825cbd000  R15: 0000000000000c00
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98
 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69
 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777
 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a
 #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466
 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46
 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29
 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95
 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574
 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582
 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1
 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1
 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6
 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4
 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28
 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7
 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e
 #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c

This occurred when umount f2fs if enable F2FS_FS_COMPRESSION
with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check
validity of pid for page_private.

Signed-off-by: Yu Changchun <yuchangchun1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

https://bugzilla.kernel.org/show_bug.cgi?id=208565

PID: 257    TASK: ecdd0000  CPU: 0   COMMAND: "init"
  #0 [<c0b420ec>] (__schedule) from [<c0b423c8>]
  #1 [<c0b423c8>] (schedule) from [<c0b459d4>]
  #2 [<c0b459d4>] (rwsem_down_read_failed) from [<c0b44fa0>]
  #3 [<c0b44fa0>] (down_read) from [<c044233c>]
  #4 [<c044233c>] (f2fs_truncate_blocks) from [<c0442890>]
  #5 [<c0442890>] (f2fs_truncate) from [<c044d408>]
  #6 [<c044d408>] (f2fs_evict_inode) from [<c030be18>]
  #7 [<c030be18>] (evict) from [<c030a558>]
  #8 [<c030a558>] (iput) from [<c047c600>]
  #9 [<c047c600>] (f2fs_sync_node_pages) from [<c0465414>]
 #10 [<c0465414>] (f2fs_write_checkpoint) from [<c04575f4>]
 #11 [<c04575f4>] (f2fs_sync_fs) from [<c0441918>]
 #12 [<c0441918>] (f2fs_do_sync_file) from [<c0441098>]
 #13 [<c0441098>] (f2fs_sync_file) from [<c0323fa0>]
 #14 [<c0323fa0>] (vfs_fsync_range) from [<c0324294>]
 #15 [<c0324294>] (do_fsync) from [<c0324014>]
 #16 [<c0324014>] (sys_fsync) from [<c0108bc0>]

This can be caused by flush_dirty_inode() in f2fs_sync_node_pages() where
iput() requires f2fs_lock_op() again resulting in livelock.

Reported-by: Zhiguo Niu <Zhiguo.Niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

The restart handler is executed during the shutdown phase which is
atomic/irq-less. The i2c framework supports atomic transfers since
commit 63b9698 ("i2c: core: introduce callbacks for atomic
transfers") to address this use case. Using i2c regmap in that
situation is not allowed:

[  165.177465] [ BUG: Invalid wait context ]
[  165.181479] 5.8.0-rc3-00003-g0e9088558027-dirty #11 Not tainted
[  165.187400] -----------------------------
[  165.191410] systemd-shutdow/1 is trying to lock:
[  165.196030] d85b4438 (rn5t618:170:(&rn5t618_regmap_config)->lock){+.+.}-{3:3}, at: regmap_update_bits_base+0x30/0x70
[  165.206573] other info that might help us debug this:
[  165.211625] context-{4:4}
[  165.214248] 2 locks held by systemd-shutdow/1:
[  165.218691]  #0: c131c47c (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x204
[  165.227405]  #1: c131efb (rcu_read_lock){....}-{1:2}, at: __atomic_notifier_call_chain+0x0/0x118
[  165.236288] stack backtrace:
[  165.239174] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.8.0-rc3-00003-g0e9088558027-dirty #11
[  165.248220] Hardware name: Freescale i.MX6 SoloLite (Device Tree)
[  165.254330] [<c0112110>] (unwind_backtrace) from [<c010bfa0>] (show_stack+0x10/0x14)
[  165.262084] [<c010bfa0>] (show_stack) from [<c058093c>] (dump_stack+0xe8/0x120)
[  165.269407] [<c058093c>] (dump_stack) from [<c01835a4>] (__lock_acquire+0x81c/0x2ca0)
[  165.277246] [<c01835a4>] (__lock_acquire) from [<c0186344>] (lock_acquire+0xe4/0x490)
[  165.285090] [<c0186344>] (lock_acquire) from [<c0c98638>] (__mutex_lock+0x74/0x954)
[  165.292756] [<c0c98638>] (__mutex_lock) from [<c0c98f34>] (mutex_lock_nested+0x1c/0x24)
[  165.300769] [<c0c98f34>] (mutex_lock_nested) from [<c07593ec>] (regmap_update_bits_base+0x30/0x70)
[  165.309741] [<c07593ec>] (regmap_update_bits_base) from [<c076b838>] (rn5t618_trigger_poweroff_sequence+0x34/0x64)
[  165.320097] [<c076b838>] (rn5t618_trigger_poweroff_sequence) from [<c076b874>] (rn5t618_restart+0xc/0x2c)
[  165.329669] [<c076b874>] (rn5t618_restart) from [<c01514f8>] (notifier_call_chain+0x48/0x80)
[  165.338113] [<c01514f8>] (notifier_call_chain) from [<c01516a8>] (__atomic_notifier_call_chain+0x70/0x118)
[  165.347770] [<c01516a8>] (__atomic_notifier_call_chain) from [<c0151768>] (atomic_notifier_call_chain+0x18/0x20)
[  165.357949] [<c0151768>] (atomic_notifier_call_chain) from [<c010a828>] (machine_restart+0x68/0x80)
[  165.367001] [<c010a828>] (machine_restart) from [<c0153224>] (__do_sys_reboot+0x11c/0x204)
[  165.375272] [<c0153224>] (__do_sys_reboot) from [<c0100080>] (ret_fast_syscall+0x0/0x28)
[  165.383364] Exception stack(0xd80a5fa8 to 0xd80a5ff0)
[  165.388420] 5fa0:                   00406948 00000000 fee1dead 28121969 01234567 73299b00
[  165.396602] 5fc0: 00406948 00000000 00000000 00000058 be91abc8 00000000 be91ab60 004056f8
[  165.404781] 5fe0: 00000058 be91aabc b6ed4d45 b6e56746

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

…s metrics" test

Linux 5.9 introduced perf test case "Parse and process metrics" and
on s390 this test case always dumps core:

  [root@t35lp67 perf]# ./perf test -vvvv -F 67
  67: Parse and process metrics                             :
  --- start ---
  metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
  parsing metric: inst_retired.any / cpu_clk_unhalted.thread
  Segmentation fault (core dumped)
  [root@t35lp67 perf]#

I debugged this core dump and gdb shows this call chain:

  (gdb) where
   #0  0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6
   #1  0x000003ffabc293de in strcasestr () from /lib64/libc.so.6
   #2  0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any",
            n=<optimized out>)
       at util/metricgroup.c:368
   #3  find_metric (map=<optimized out>, map=<optimized out>,
           metric=0x1e6ea20 "inst_retired.any")
      at util/metricgroup.c:765
   #4  __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0,
           metric_no_group=<optimized out>, m=<optimized out>)
      at util/metricgroup.c:844
   #5  resolve_metric (ids=0x0, map=0x0, metric_list=0x0,
          metric_no_group=<optimized out>)
      at util/metricgroup.c:881
   #6  metricgroup__add_metric (metric=<optimized out>,
        metric_no_group=metric_no_group@entry=false, events=<optimized out>,
        events@entry=0x3ffd84fb878, metric_list=0x0,
        metric_list@entry=0x3ffd84fb868, map=0x0)
      at util/metricgroup.c:943
   #7  0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>,
        metric_list=0x3ffd84fb868, events=0x3ffd84fb878,
        metric_no_group=<optimized out>, list=<optimized out>)
      at util/metricgroup.c:988
   #8  parse_groups (perf_evlist=perf_evlist@entry=0x1e70260,
          str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>,
          metric_no_merge=<optimized out>,
          fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>,
          metric_events=0x3ffd84fba58, map=0x1)
      at util/metricgroup.c:1040
   #9  0x0000000001103eb2 in metricgroup__parse_groups_test(
  	evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>,
  	str=str@entry=0x12f34b2 "IPC",
  	metric_no_group=metric_no_group@entry=false,
  	metric_no_merge=metric_no_merge@entry=false,
  	metric_events=0x3ffd84fba58)
      at util/metricgroup.c:1082
   #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0,
          ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC",
  	vals=0x3ffd84fbad8, name=0x12f34b2 "IPC")
      at tests/parse-metric.c:159
   #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8,
  	name=0x12f34b2 "IPC")
      at tests/parse-metric.c:189
   #12 test_ipc () at tests/parse-metric.c:208
.....
..... omitted many more lines

This test case was added with
commit 218ca91 ("perf tests: Add parse metric test for frontend metric").

When I compile with make DEBUG=y it works fine and I do not get a core dump.

It turned out that the above listed function call chain worked on a struct
pmu_event array which requires a trailing element with zeroes which was
missing. The marco map_for_each_event() loops over that array tests for members
metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes
the issue.

Output after:

  [root@t35lp46 perf]# ./perf test 67
  67: Parse and process metrics                             : Ok
  [root@t35lp46 perf]#

Committer notes:

As Ian remarks, this is not s390 specific:

<quote Ian>
  This also shows up with address sanitizer on all architectures
  (perhaps change the patch title) and perhaps add a "Fixes: <commit>"
  tag.

  =================================================================
  ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address
  0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp
  0x7ffd24327c58
  READ of size 8 at 0x55c93b4d59e8 thread T0
      #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2
      #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9
      #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9
      #3 0x55c93a1528db in metricgroup__add_metric
  tools/perf/util/metricgroup.c:943:9
      #4 0x55c93a151996 in metricgroup__add_metric_list
  tools/perf/util/metricgroup.c:988:9
      #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8
      #6 0x55c93a1513e1 in metricgroup__parse_groups_test
  tools/perf/util/metricgroup.c:1082:9
      #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8
      #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9
      #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2
      #10 0x55c93a00f1e8 in test__parse_metric
  tools/perf/tests/parse-metric.c:345:2
      #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9
      #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9
      #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4
      #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9
      #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11
      #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8
      #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2
      #18 0x55c939e45f7e in main tools/perf/perf.c:539:3

  0x55c93b4d59e8 is located 0 bytes to the right of global variable
  'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25'
  (0x55c93b4d54a0) of size 1352
  SUMMARY: AddressSanitizer: global-buffer-overflow
  tools/perf/util/metricgroup.c:764:2 in find_metric
  Shadow bytes around the buggy address:
    0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9
    0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
    0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
    0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00
    0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
  Shadow byte legend (one shadow byte represents 8 application bytes):
    Addressable:           00
    Partially addressable: 01 02 03 04 05 06 07
    Heap left redzone:	   fa
    Freed heap region:	   fd
    Stack left redzone:	   f1
    Stack mid redzone:	   f2
    Stack right redzone:     f3
    Stack after return:	   f5
    Stack use after scope:   f8
    Global redzone:          f9
    Global init order:	   f6
    Poisoned by user:        f7
    Container overflow:	   fc
    Array cookie:            ac
    Intra object redzone:    bb
    ASan internal:           fe
    Left alloca redzone:     ca
    Right alloca redzone:    cb
    Shadow gap:              cc
</quote>

I'm also adding the missing "Fixes" tag and setting just .name to NULL,
as doing it that way is more compact (the compiler will zero out
everything else) and the table iterators look for .name being NULL as
the sentinel marking the end of the table.

Fixes: 0a507af ("perf tests: Add parse metric test for ipc metric")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The aliases were never released causing the following leaks:

  Indirect leak of 1224 byte(s) in 9 object(s) allocated from:
    #0 0x7feefb830628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
    #1 0x56332c8f1b62 in __perf_pmu__new_alias util/pmu.c:322
    #2 0x56332c8f401f in pmu_add_cpu_aliases_map util/pmu.c:778
    #3 0x56332c792ce9 in __test__pmu_event_aliases tests/pmu-events.c:295
    #4 0x56332c792ce9 in test_aliases tests/pmu-events.c:367
    #5 0x56332c76a09b in run_test tests/builtin-test.c:410
    #6 0x56332c76a09b in test_and_print tests/builtin-test.c:440
    #7 0x56332c76ce69 in __cmd_test tests/builtin-test.c:695
    #8 0x56332c76ce69 in cmd_test tests/builtin-test.c:807
    #9 0x56332c7d2214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #10 0x56332c6701a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #11 0x56332c6701a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #12 0x56332c6701a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #13 0x7feefb359cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: 956a783 ("perf test: Test pmu-events aliases")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evsel->unit borrows a pointer of pmu event or alias instead of
owns a string.  But tool event (duration_time) passes a result of
strdup() caused a leak.

It was found by ASAN during metric test:

  Direct leak of 210 byte(s) in 70 object(s) allocated from:
    #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
    #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414
    #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414
    #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
    #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
    #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141
    #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406
    #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393
    #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415
    #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498
    #10 0x559fbbc0109b in run_test tests/builtin-test.c:410
    #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
    #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
    #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
    #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The test_generic_metric() missed to release entries in the pctx.  Asan
reported following leak (and more):

  Direct leak of 128 byte(s) in 1 object(s) allocated from:
    #0 0x7f4c9396980e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
    #1 0x55f7e748cc14 in hashmap_grow (/home/namhyung/project/linux/tools/perf/perf+0x90cc14)
    #2 0x55f7e748d497 in hashmap__insert (/home/namhyung/project/linux/tools/perf/perf+0x90d497)
    #3 0x55f7e7341667 in hashmap__set /home/namhyung/project/linux/tools/perf/util/hashmap.h:111
    #4 0x55f7e7341667 in expr__add_ref util/expr.c:120
    #5 0x55f7e7292436 in prepare_metric util/stat-shadow.c:783
    #6 0x55f7e729556d in test_generic_metric util/stat-shadow.c:858
    #7 0x55f7e712390b in compute_single tests/parse-metric.c:128
    #8 0x55f7e712390b in __compute_metric tests/parse-metric.c:180
    #9 0x55f7e712446d in compute_metric tests/parse-metric.c:196
    #10 0x55f7e712446d in test_dcache_l2 tests/parse-metric.c:295
    #11 0x55f7e712446d in test__parse_metric tests/parse-metric.c:355
    #12 0x55f7e70be09b in run_test tests/builtin-test.c:410
    #13 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
    #14 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
    #15 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
    #16 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #17 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #18 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #19 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #20 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: 6d432c4 ("perf tools: Add test_generic_metric function")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The metricgroup__add_metric() can find multiple match for a metric group
and it's possible to fail.  Also it can fail in the middle like in
resolve_metric() even for single metric.

In those cases, the intermediate list and ids will be leaked like:

  Direct leak of 3 byte(s) in 1 object(s) allocated from:
    #0 0x7f4c938f40b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5)
    #1 0x55f7e71c1bef in __add_metric util/metricgroup.c:683
    #2 0x55f7e71c31d0 in add_metric util/metricgroup.c:906
    #3 0x55f7e71c3844 in metricgroup__add_metric util/metricgroup.c:940
    #4 0x55f7e71c488d in metricgroup__add_metric_list util/metricgroup.c:993
    #5 0x55f7e71c488d in parse_groups util/metricgroup.c:1045
    #6 0x55f7e71c60a4 in metricgroup__parse_groups_test util/metricgroup.c:1087
    #7 0x55f7e71235ae in __compute_metric tests/parse-metric.c:164
    #8 0x55f7e7124650 in compute_metric tests/parse-metric.c:196
    #9 0x55f7e7124650 in test_recursion_fail tests/parse-metric.c:318
    #10 0x55f7e7124650 in test__parse_metric tests/parse-metric.c:356
    #11 0x55f7e70be09b in run_test tests/builtin-test.c:410
    #12 0x55f7e70be09b in test_and_print tests/builtin-test.c:440
    #13 0x55f7e70c101a in __cmd_test tests/builtin-test.c:661
    #14 0x55f7e70c101a in cmd_test tests/builtin-test.c:807
    #15 0x55f7e7126214 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #16 0x55f7e6fc41a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #17 0x55f7e6fc41a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #18 0x55f7e6fc41a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #19 0x7f4c93492cc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: 83de0b7 ("perf metric: Collect referenced metrics in struct metric_ref_node")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The following leaks were detected by ASAN:

  Indirect leak of 360 byte(s) in 9 object(s) allocated from:
    #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
    #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
    #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
    #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
    #4 0x560578e07045 in test__pmu tests/pmu.c:155
    #5 0x560578de109b in run_test tests/builtin-test.c:410
    #6 0x560578de109b in test_and_print tests/builtin-test.c:440
    #7 0x560578de401a in __cmd_test tests/builtin-test.c:661
    #8 0x560578de401a in cmd_test tests/builtin-test.c:807
    #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: cff7f95 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Like evlist cpu map, evsel's cpu map should have a proper refcount.

As it's created with a refcount, we don't need to get an extra count.
Thanks to Arnaldo for the simpler suggestion.

This, together with the following patch, fixes the following ASAN
report:

  Direct leak of 840 byte(s) in 70 object(s) allocated from:
    #0 0x7fe36703f628 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x107628)
    #1 0x559fbbf611ca in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x559fbbf6229c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
    #3 0x559fbbcc6c6d in __add_event util/parse-events.c:357
    #4 0x559fbbcc6c6d in add_event_tool util/parse-events.c:408
    #5 0x559fbbcc6c6d in parse_events_add_tool util/parse-events.c:1414
    #6 0x559fbbd8474d in parse_events_parse util/parse-events.y:439
    #7 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096
    #8 0x559fbbcc95da in __parse_events util/parse-events.c:2141
    #9 0x559fbbc2788b in check_parse_id tests/pmu-events.c:406
    #10 0x559fbbc2788b in check_parse_id tests/pmu-events.c:393
    #11 0x559fbbc2788b in check_parse_fake tests/pmu-events.c:436
    #12 0x559fbbc2788b in metric_parse_fake tests/pmu-events.c:553
    #13 0x559fbbc27e2d in test_parsing_fake tests/pmu-events.c:599
    #14 0x559fbbc27e2d in test_parsing_fake tests/pmu-events.c:574
    #15 0x559fbbc0109b in run_test tests/builtin-test.c:410
    #16 0x559fbbc0109b in test_and_print tests/builtin-test.c:440
    #17 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695
    #18 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807
    #19 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #20 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #21 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #22 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #23 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308

And I've failed which commit introduced this bug as the code was
heavily changed since then. ;-/

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200917060219.1287863-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

AddressSanitizer found a use-after-free bug in the symbol code which
manifested as 'perf top' segfaulting.

  ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80
  READ of size 1 at 0x60b00c48844b thread T193
      #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310
      #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286
      #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614
      #3 0x5650d804568f in __hists__add_entry util/hist.c:754
      #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772
      #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997
      #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242
      #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845
      #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208
      #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245
      #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324
      #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120
      #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442
      #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81

When updating hist maps it's also necessary to update the hist symbol
reference because the old one gets freed in map__put().

While this bug was probably introduced with 5c24b67 ("perf
tools: Replace map->referenced & maps->removed_maps with map->refcnt"),
the symbol objects were leaked until c087e94 ("perf machine:
Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so
the bug was masked.

Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL")
Reported-by: Yunzhao Li <yunzhao@cloudflare.com>
Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com>
Cc: Ian Rogers <irogers@google.com>
Cc: kernel-team@cloudflare.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org # v5.13+
Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.

So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage.  So it shouldn't access it
unconditionally.

I got a segfault, when I wanted to see cgroup profiles.

  $ sudo perf record -a --all-cgroups --synth=cgroup true

  $ sudo perf report -s cgroup

  Program received signal SIGSEGV, Segmentation fault.
  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  48		return RC_CHK_ACCESS(map)->dso;
  (gdb) bt
  #0  0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
  #1  0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
  #2  0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
  #3  0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
      at util/hist.c:644
  #4  0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
  #5  0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
      sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
  #6  0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
  #7  0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
      at util/hist.c:1260
  #8  0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
      machine=0x5555560388e8) at builtin-report.c:334
  #9  0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
  #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
      sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
  #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
      file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
  #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
  #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
  #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
  #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
  #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
      at util/session.c:780
  #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
      file_path=0x555556038ff0 "perf.data") at util/session.c:1406

As you can see the entry->ms.map was NULL even if he->ms.map has a
value.  This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same.  I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).

Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We're seeing crashes from rq_qos_wake_function that look like this:

  BUG: unable to handle page fault for address: ffffafe180a40084
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
  Oops: Oops: 0002 [#1] PREEMPT SMP PTI
  CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
  RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
  Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
  RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
  RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
  RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
  R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
  R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
  FS:  0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   <IRQ>
   try_to_wake_up+0x5a/0x6a0
   rq_qos_wake_function+0x71/0x80
   __wake_up_common+0x75/0xa0
   __wake_up+0x36/0x60
   scale_up.part.0+0x50/0x110
   wb_timer_fn+0x227/0x450
   ...

So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).

p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.

What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:

rq_qos_wait()                           rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
                                        data->got_token = true;
                                        list_del_init(&curr->entry);
if (data.got_token)
        break;
finish_wait(&rqw->wait, &data.wq);
  ^- returns immediately because
     list_empty_careful(&wq_entry->entry)
     is true
... return, go do something else ...
                                        wake_up_process(data->task)
                                          (NO LONGER VALID!)-^

Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.

The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.

Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().

Fixes: 38cfb5a ("blk-wbt: improve waking of tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT
creates this splat when an MPTCP socket is created:

  =============================
  WARNING: suspicious RCU usage
  6.12.0-rc2+ #11 Not tainted
  -----------------------------
  net/mptcp/sched.c:44 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  rcu_scheduler_active = 2, debug_locks = 1
  no locks held by mptcp_connect/176.

  stack backtrace:
  CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
   <TASK>
   dump_stack_lvl (lib/dump_stack.c:123)
   lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
   mptcp_sched_find (net/mptcp/sched.c:44 (discriminator 7))
   mptcp_init_sock (net/mptcp/protocol.c:2867 (discriminator 1))
   ? sock_init_data_uid (arch/x86/include/asm/atomic.h:28)
   inet_create.part.0.constprop.0 (net/ipv4/af_inet.c:386)
   ? __sock_create (include/linux/rcupdate.h:347 (discriminator 1))
   __sock_create (net/socket.c:1576)
   __sys_socket (net/socket.c:1671)
   ? __pfx___sys_socket (net/socket.c:1712)
   ? do_user_addr_fault (arch/x86/mm/fault.c:1419 (discriminator 1))
   __x64_sys_socket (net/socket.c:1728)
   do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1))
   entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

That's because when the socket is initialised, rcu_read_lock() is not
used despite the explicit comment written above the declaration of
mptcp_sched_find() in sched.c. Adding the missing lock/unlock avoids the
warning.

Fixes: 1730b2b ("mptcp: add sched in mptcp_sock")
Cc: stable@vger.kernel.org
Closes: multipath-tcp/mptcp_net-next#523
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241021-net-mptcp-sched-lock-v1-1-637759cf061c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Disable strict aliasing, as has been done in the kernel proper for decades
(literally since before git history) to fix issues where gcc will optimize
away loads in code that looks 100% correct, but is _technically_ undefined
behavior, and thus can be thrown away by the compiler.

E.g. arm64's vPMU counter access test casts a uint64_t (unsigned long)
pointer to a u64 (unsigned long long) pointer when setting PMCR.N via
u64p_replace_bits(), which gcc-13 detects and optimizes away, i.e. ignores
the result and uses the original PMCR.

The issue is most easily observed by making set_pmcr_n() noinline and
wrapping the call with printf(), e.g. sans comments, for this code:

  printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n);
  set_pmcr_n(&pmcr, pmcr_n);
  printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n);

gcc-13 generates:

 0000000000401c90 <set_pmcr_n>:
  401c90:       f9400002        ldr     x2, [x0]
  401c94:       b3751022        bfi     x2, x1, #11, #5
  401c98:       f9000002        str     x2, [x0]
  401c9c:       d65f03c0        ret

 0000000000402660 <test_create_vpmu_vm_with_pmcr_n>:
  402724:       aa1403e3        mov     x3, x20
  402728:       aa1503e2        mov     x2, x21
  40272c:       aa1603e0        mov     x0, x22
  402730:       aa1503e1        mov     x1, x21
  402734:       940060ff        bl      41ab30 <_IO_printf>
  402738:       aa1403e1        mov     x1, x20
  40273c:       910183e0        add     x0, sp, #0x60
  402740:       97fffd54        bl      401c90 <set_pmcr_n>
  402744:       aa1403e3        mov     x3, x20
  402748:       aa1503e2        mov     x2, x21
  40274c:       aa1503e1        mov     x1, x21
  402750:       aa1603e0        mov     x0, x22
  402754:       940060f        bl      41ab30 <_IO_printf>

with the value stored in [sp + 0x60] ignored by both printf() above and
in the test proper, resulting in a false failure due to vcpu_set_reg()
simply storing the original value, not the intended value.

  $ ./vpmu_counter_access
  Random seed: 0x6b8b4567
  orig = 3040, next = 3040, want = 0
  orig = 3040, next = 3040, want = 0
  ==== Test Assertion Failure ====
    aarch64/vpmu_counter_access.c:505: pmcr_n == get_pmcr_n(pmcr)
    pid=71578 tid=71578 errno=9 - Bad file descriptor
       1        0x400673: run_access_test at vpmu_counter_access.c:522
       2         (inlined by) main at vpmu_counter_access.c:643
       3        0x4132d7: __libc_start_call_main at libc-start.o:0
       4        0x413653: __libc_start_main at ??:0
       5        0x40106f: _start at ??:0
    Failed to update PMCR.N to 0 (received: 6)

Somewhat bizarrely, gcc-11 also exhibits the same behavior, but only if
set_pmcr_n() is marked noinline, whereas gcc-13 fails even if set_pmcr_n()
is inlined in its sole caller.

Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=116912
Signed-off-by: Sean Christopherson <seanjc@google.com>

Daniel Machon says:

====================
net: sparx5: add support for lan969x switch device

== Description:

This series is the second of a multi-part series, that prepares and adds
support for the new lan969x switch driver.

The upstreaming efforts is split into multiple series (might change a
bit as we go along):

        1) Prepare the Sparx5 driver for lan969x (merged)

    --> 2) add support lan969x (same basic features as Sparx5
           provides excl. FDMA and VCAP).

        3) Add support for lan969x VCAP, FDMA and RGMII

== Lan969x in short:

The lan969x Ethernet switch family [1] provides a rich set of
switching features and port configurations (up to 30 ports) from 10Mbps
to 10Gbps, with support for RGMII, SGMII, QSGMII, USGMII, and USXGMII,
ideal for industrial & process automation infrastructure applications,
transport, grid automation, power substation automation, and ring &
intra-ring topologies. The LAN969x family is hardware and software
compatible and scalable supporting 46Gbps to 102Gbps switch bandwidths.

== Preparing Sparx5 for lan969x:

The main preparation work for lan969x has already been merged [1].

After this series is applied, lan969x will have the same functionality
as Sparx5, except for VCAP and FDMA support. QoS features that requires
the VCAP (e.g. PSFP, port mirroring) will obviously not work until VCAP
support is added later.

== Patch breakdown:

Patch #1-#4  do some preparation work for lan969x

Patch #5     adds new registers required by lan969x

Patch #6     adds initial match data for all lan969x targets

Patch #7     defines the lan969x register differences

Patch #8     adds lan969x constants to match data

Patch #9     adds some lan969x ops in bulk

Patch #10    adds PTP function to ops

Patch #11    adds lan969x_calendar.c for calculating the calendar

Patch #12    makes additional use of the is_sparx5() macro to branch out
             in certain places.

Patch #13    documents lan969x in the dt-bindings

Patch #14    adds lan969x compatible string to sparx5 driver

Patch #15    introduces new concept of per-target features

[1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com/

v1: https://lore.kernel.org/20241021-sparx5-lan969x-switch-driver-2-v1-0-c8c49ef21e0f@microchip.com
====================

Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-0-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This commit provides a watchdog timer that sets a limit of how long a
single sub-test could run:
- if sub-test runs for 10 seconds, the name of the test is printed
  (currently the name of the test is printed only after it finishes);
- if sub-test runs for 120 seconds, the running thread is terminated
  with SIGSEGV (to trigger crash_handler() and get a stack trace).

Specifically:
- the timer is armed on each call to run_one_test();
- re-armed at each call to test__start_subtest();
- is stopped when exiting run_one_test().

Default timeout could be overridden using '-w' or '--watchdog-timeout'
options. Value 0 can be used to turn the timer off.
Here is an example execution:

    $ ./ssh-exec.sh ./test_progs -w 5 -t \
      send_signal/send_signal_perf_thread_remote,send_signal/send_signal_nmi_thread_remote
    WATCHDOG: test case send_signal/send_signal_nmi_thread_remote executes for 5 seconds, terminating with SIGSEGV
    Caught signal #11!
    Stack trace:
    ./test_progs(crash_handler+0x1f)[0x9049ef]
    /lib64/libc.so.6(+0x40d00)[0x7f1f1184fd00]
    /lib64/libc.so.6(read+0x4a)[0x7f1f1191cc4a]
    ./test_progs[0x720dd3]
    ./test_progs[0x71ef7a]
    ./test_progs(test_send_signal+0x1db)[0x71edeb]
    ./test_progs[0x9066c5]
    ./test_progs(main+0x5ed)[0x9054ad]
    /lib64/libc.so.6(+0x2a088)[0x7f1f11839088]
    /lib64/libc.so.6(__libc_start_main+0x8b)[0x7f1f1183914b]
    ./test_progs(_start+0x25)[0x527385]
    #292     send_signal:FAIL
    test_send_signal_common:PASS:reading pipe 0 nsec
    test_send_signal_common:PASS:reading pipe error: size 0 0 nsec
    test_send_signal_common:PASS:incorrect result 0 nsec
    test_send_signal_common:PASS:pipe_write 0 nsec
    test_send_signal_common:PASS:setpriority 0 nsec

Timer is implemented using timer_{create,start} librt API.
Internally librt uses pthreads for SIGEV_THREAD timers,
so this change adds a background timer thread to the test process.
Because of this a few checks in tests 'bpf_iter' and 'iters'
need an update to account for an extra thread.

For parallelized scenario the watchdog is also created for each worker
fork. If one of the workers gets stuck, it would be terminated by a
watchdog. In theory, this might lead to a scenario when all worker
threads are exhausted, however this should not be a problem for
server_main(), as it would exit with some of the tests not run.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

During the update procedure, when overwrite element in a pre-allocated
htab, the freeing of old_element is protected by the bucket lock. The
reason why the bucket lock is necessary is that the old_element has
already been stashed in htab->extra_elems after alloc_htab_elem()
returns. If freeing the old_element after the bucket lock is unlocked,
the stashed element may be reused by concurrent update procedure and the
freeing of old_element will run concurrently with the reuse of the
old_element. However, the invocation of check_and_free_fields() may
acquire a spin-lock which violates the lockdep rule because its caller
has already held a raw-spin-lock (bucket lock). The following warning
will be reported when such race happens:

  BUG: scheduling while atomic: test_progs/676/0x00000003
  3 locks held by test_progs/676:
  #0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830
  #1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500
  #2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0
  Modules linked in: bpf_testmod(O)
  Preemption disabled at:
  [<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500
  CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11
  Tainted: [W]=WARN, [O]=OOT_MODULE
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)...
  Call Trace:
  <TASK>
  dump_stack_lvl+0x57/0x70
  dump_stack+0x10/0x20
  __schedule_bug+0x120/0x170
  __schedule+0x300c/0x4800
  schedule_rtlock+0x37/0x60
  rtlock_slowlock_locked+0x6d9/0x54c0
  rt_spin_lock+0x168/0x230
  hrtimer_cancel_wait_running+0xe9/0x1b0
  hrtimer_cancel+0x24/0x30
  bpf_timer_delete_work+0x1d/0x40
  bpf_timer_cancel_and_free+0x5e/0x80
  bpf_obj_free_fields+0x262/0x4a0
  check_and_free_fields+0x1d0/0x280
  htab_map_update_elem+0x7fc/0x1500
  bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43
  bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e
  bpf_prog_test_run_syscall+0x322/0x830
  __sys_bpf+0x135d/0x3ca0
  __x64_sys_bpf+0x75/0xb0
  x64_sys_call+0x1b5/0xa10
  do_syscall_64+0x3b/0xc0
  entry_SYSCALL_64_after_hwframe+0x4b/0x53
  ...
  </TASK>

It seems feasible to break the reuse and refill of per-cpu extra_elems
into two independent parts: reuse the per-cpu extra_elems with bucket
lock being held and refill the old_element as per-cpu extra_elems after
the bucket lock is unlocked. However, it will make the concurrent
overwrite procedures on the same CPU return unexpected -E2BIG error when
the map is full.

Therefore, the patch fixes the lock problem by breaking the cancelling
of bpf_timer into two steps for PREEMPT_RT:
1) use hrtimer_try_to_cancel() and check its return value
2) if the timer is running, use hrtimer_cancel() through a kworker to
   cancel it again
Considering that the current implementation of hrtimer_cancel() will try
to acquire a being held softirq_expiry_lock when the current timer is
running, these steps above are reasonable. However, it also has
downside. When the timer is running, the cancelling of the timer is
delayed when releasing the last map uref. The delay is also fixable
(e.g., break the cancelling of bpf timer into two parts: one part in
locked scope, another one in unlocked scope), it can be revised later if
necessary.

It is a bit hard to decide the right fix tag. One reason is that the
problem depends on PREEMPT_RT which is enabled in v6.12. Considering the
softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced
in v5.15, the bpf_timer commit is used in the fixes tag and an extra
depends-on tag is added to state the dependency on PREEMPT_RT.

Fixes: b00628b ("bpf: Introduce bpf timers.")
Depends-on: v6.12+ with PREEMPT_RT enabled
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/bpf/20241106084527.4gPrMnHt@linutronix.de
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://lore.kernel.org/r/20250117101816.2101857-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

libtraceevent parses and returns an array of argument fields, sometimes
larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr",
idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6
elements max, creating an out-of-bounds access. This runtime error is
found by UBsan. The error message:

  $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1
  builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]'
    #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966
    #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110
    #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436
    #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897
    #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335
    #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502
    #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351
    #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404
    #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448
    #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556
    #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
    #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360
    #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6)

     0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1)                                      = 1

Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint")
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Chia-Yu Chang says:

====================
AccECN protocol preparation patch series

Please find the v7

v7 (03-Mar-2025)
- Move 2 new patches added in v6 to the next AccECN patch series

v6 (27-Dec-2024)
- Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>)
- Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14
- Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN)
  * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption
  * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN)
- Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>)
- Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>)

v5 (5-Nov-2024)
- Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>)
- Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>)
- Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety
- Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>)

v4 (21-Oct-2024)
- Fix line length warning of patches #2, #4, #8, #10, #11, #14
- Fix spaces preferred around '|' (ctx:VxV) warning of patch #7
- Add missing CC'ed of patches #4, #12, #14

v3 (19-Oct-2024)
- Fix build error in v2

v2 (18-Oct-2024)
- Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>)

The full patch series can be found in
https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/

The Accurate ECN draft can be found in
https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Once inside 'ext4_xattr_inode_dec_ref_all' we should
ignore xattrs entries past the 'end' entry.

This fixes the following KASAN reported issue:

==================================================================
BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
Read of size 4 at addr ffff888012c120c4 by task repro/2065

CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1fd/0x300
 ? tcp_gro_dev_warn+0x260/0x260
 ? _printk+0xc0/0x100
 ? read_lock_is_recursive+0x10/0x10
 ? irq_work_queue+0x72/0xf0
 ? __virt_addr_valid+0x17b/0x4b0
 print_address_description+0x78/0x390
 print_report+0x107/0x1f0
 ? __virt_addr_valid+0x17b/0x4b0
 ? __virt_addr_valid+0x3ff/0x4b0
 ? __phys_addr+0xb5/0x160
 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 kasan_report+0xcc/0x100
 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 ? ext4_xattr_delete_inode+0xd30/0xd30
 ? __ext4_journal_ensure_credits+0x5f0/0x5f0
 ? __ext4_journal_ensure_credits+0x2b/0x5f0
 ? inode_update_timestamps+0x410/0x410
 ext4_xattr_delete_inode+0xb64/0xd30
 ? ext4_truncate+0xb70/0xdc0
 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20
 ? __ext4_mark_inode_dirty+0x670/0x670
 ? ext4_journal_check_start+0x16f/0x240
 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0
 ext4_evict_inode+0xc8c/0xff0
 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0
 ? do_raw_spin_unlock+0x53/0x8a0
 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0
 evict+0x4ac/0x950
 ? proc_nr_inodes+0x310/0x310
 ? trace_ext4_drop_inode+0xa2/0x220
 ? _raw_spin_unlock+0x1a/0x30
 ? iput+0x4cb/0x7e0
 do_unlinkat+0x495/0x7c0
 ? try_break_deleg+0x120/0x120
 ? 0xffffffff81000000
 ? __check_object_size+0x15a/0x210
 ? strncpy_from_user+0x13e/0x250
 ? getname_flags+0x1dc/0x530
 __x64_sys_unlinkat+0xc8/0xf0
 do_syscall_64+0x65/0x110
 entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x434ffd
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107
RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001
 </TASK>

The buggy address belongs to the object at ffff888012c12000
 which belongs to the cache filp of size 360
The buggy address is located 196 bytes inside of
 freed 360-byte region [ffff888012c12000, ffff888012c12168)

The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x40(head|node=0|zone=0)
page_type: f5(slab)
raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000
head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                           ^
 ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
 ffff888012c12180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Reported-by: syzbot+b244bda78289b00204ed@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b244bda78289b00204ed
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Bhupesh <bhupesh@igalia.com>
Link: https://patch.msgid.link/20250128082751.124948-2-bhupesh@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

perf test 11 hwmon fails on s390 with this error

 # ./perf test -Fv 11
 --- start ---
 ---- end ----
 11.1: Basic parsing test             : Ok
 --- start ---
 Testing 'temp_test_hwmon_event1'
 Using CPUID IBM,3931,704,A01,3.7,002f
 temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/
 FAILED tests/hwmon_pmu.c:189 Unexpected config for
    'temp_test_hwmon_event1', 292470092988416 != 655361
 ---- end ----
 11.2: Parsing without PMU name       : FAILED!
 --- start ---
 Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/'
 FAILED tests/hwmon_pmu.c:189 Unexpected config for
    'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/',
    292470092988416 != 655361
 ---- end ----
 11.3: Parsing with PMU name          : FAILED!
 #

The root cause is in member test_event::config which is initialized
to 0xA0001 or 655361. During event parsing a long list event parsing
functions are called and end up with this gdb call stack:

 #0  hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8,
	term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623
 #1  hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8,
	terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662
 #2  0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0,
	attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false,
	apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519
 #3  0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8,
	head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8)
	at util/pmu.c:1545
 #4  0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8,
	list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090,
	auto_merge_stats=true, alternate_hw_config=10)
	at util/parse-events.c:1508
 #5  0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8,
	event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10,
	const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0)
	at util/parse-events.c:1592
 #6  0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8,
	scanner=0x16878c0) at util/parse-events.y:293
 #7  0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8
	"temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8)
	at util/parse-events.c:1867
 #8  0x000000000126a1e8 in __parse_events (evlist=0x168b580,
	str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0,
	err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true,
	fake_tp=false) at util/parse-events.c:2136
 #9  0x00000000011e36aa in parse_events (evlist=0x168b580,
	str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8)
	at /root/linux/tools/perf/util/parse-events.h:41
 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false)
	at tests/hwmon_pmu.c:164
 #11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false)
	at tests/hwmon_pmu.c:219
 #12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368
	<suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23

where the attr::config is set to value 292470092988416 or 0x10a0000000000
in line 625 of file ./util/hwmon_pmu.c:

   attr->config = key.type_and_num;

However member key::type_and_num is defined as union and bit field:

   union hwmon_pmu_event_key {
        long type_and_num;
        struct {
                int num :16;
                enum hwmon_type type :8;
        };
   };

s390 is big endian and Intel is little endian architecture.
The events for the hwmon dummy pmu have num = 1 or num = 2 and
type is set to HWMON_TYPE_TEMP (which is 10).
On s390 this assignes member key::type_and_num the value of
0x10a0000000000 (which is 292470092988416) as shown in above
trace output.

Fix this and export the structure/union hwmon_pmu_event_key
so the test shares the same implementation as the event parsing
functions for union and bit fields. This should avoid
endianess issues on all platforms.

Output after:
 # ./perf test -F 11
 11.1: Basic parsing test         : Ok
 11.2: Parsing without PMU name   : Ok
 11.3: Parsing with PMU name      : Ok
 #

Fixes: 531ee0f ("perf test: Add hwmon "PMU" test")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Ian told me that there are many memory leaks in the hierarchy mode.  I
can easily reproduce it with the follwing command.

  $ make DEBUG=1 EXTRA_CFLAGS=-fsanitize=leak

  $ perf record --latency -g -- ./perf test -w thloop

  $ perf report -H --stdio
  ...
  Indirect leak of 168 byte(s) in 21 object(s) allocated from:
      #0 0x7f3414c16c65 in malloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:75
      #1 0x55ed3602346e in map__get util/map.h:189
      #2 0x55ed36024cc4 in hist_entry__init util/hist.c:476
      #3 0x55ed36025208 in hist_entry__new util/hist.c:588
      #4 0x55ed36027c05 in hierarchy_insert_entry util/hist.c:1587
      #5 0x55ed36027e2e in hists__hierarchy_insert_entry util/hist.c:1638
      #6 0x55ed36027fa4 in hists__collapse_insert_entry util/hist.c:1685
      #7 0x55ed360283e8 in hists__collapse_resort util/hist.c:1776
      #8 0x55ed35de0323 in report__collapse_hists /home/namhyung/project/linux/tools/perf/builtin-report.c:735
      #9 0x55ed35de15b4 in __cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1119
      #10 0x55ed35de43dc in cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1867
      #11 0x55ed35e66767 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:351
      #12 0x55ed35e66a0e in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:404
      #13 0x55ed35e66b67 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:448
      #14 0x55ed35e66eb0 in main /home/namhyung/project/linux/tools/perf/perf.c:556
      #15 0x7f340ac33d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
  ...

  $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak'
  93

I found that hist_entry__delete() missed to release child entries in the
hierarchy tree (hroot_{in,out}).  It needs to iterate the child entries
and call hist_entry__delete() recursively.

After this change:

  $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak'
  0

Reported-by: Ian Rogers <irogers@google.com>
Tested-by Thomas Falcon <thomas.falcon@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250307061250.320849-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The env.pmu_mapping can be leaked when it reads data from a pipe on AMD.
For a pipe data, it reads the header data including pmu_mapping from
PERF_RECORD_HEADER_FEATURE runtime.  But it's already set in:

  perf_session__new()
    __perf_session__new()
      evlist__init_trace_event_sample_raw()
        evlist__has_amd_ibs()
          perf_env__nr_pmu_mappings()

Then it'll overwrite that when it processes the HEADER_FEATURE record.
Here's a report from address sanitizer.

  Direct leak of 2689 byte(s) in 1 object(s) allocated from:
    #0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98
    #1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64
    #2 0x5595a7d414ef in strbuf_init util/strbuf.c:25
    #3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362
    #4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517
    #5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315
    #6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23
    #7 0x5595a7d7f893 in __perf_session__new util/session.c:179
    #8 0x5595a7b79572 in perf_session__new util/session.h:115
    #9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603
    #10 0x5595a7c019eb in run_builtin perf.c:351
    #11 0x5595a7c01c92 in handle_internal_command perf.c:404
    #12 0x5595a7c01deb in run_argv perf.c:448
    #13 0x5595a7c02134 in main perf.c:556
    #14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58

Let's free the existing pmu_mapping data if any.

Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

…ge_order()

Patch series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT", v3.

Let's add an "easy" way to decide -- without false positives, without
page-mapcounts and without page table/rmap scanning -- whether a large
folio is "certainly mapped exclusively" into a single MM, or whether it
"maybe mapped shared" into multiple MMs.

Use that information to implement Copy-on-Write reuse, to convert
folio_likely_mapped_shared() to folio_maybe_mapped_share(), and to
introduce a kernel config option that lets us not use+maintain per-page
mapcounts in large folios anymore.

The bigger picture was presented at LSF/MM [1].

This series is effectively a follow-up on my early work [2], which
implemented a more precise, but also more complicated, way to identify
whether a large folio is "mapped shared" into multiple MMs or "mapped
exclusively" into a single MM.


1 Patch Organization
====================

Patch #1 -> #6: make more room in order-1 folios, so we have two
                "unsigned long" available for our purposes

Patch #7 -> #11: preparations

Patch #12: MM owner tracking for large folios

Patch #13: COW reuse for PTE-mapped anon THP

Patch #14: folio_maybe_mapped_shared()

Patch #15 -> #20: introduce and implement CONFIG_NO_PAGE_MAPCOUNT


2 MM owner tracking
===================

We assign each MM a unique ID ("MM ID"), to be able to squeeze more
information in our folios.  On 32bit we use 15-bit IDs, on 64bit we use
31-bit IDs.

For each large folios, we now store two MM-ID+mapcount ("slot")
combinations:
* mm0_id + mm0_mapcount
* mm1_id + mm1_mapcount

On 32bit, we use a 16-bit per-MM mapcount, on 64bit an ordinary 32bit
mapcount.  This way, we require 2x "unsigned long" on 32bit and 64bit for
both slots.

Paired with the large mapcount, we can reliably identify whether one of
these MMs is the current owner (-> owns all mappings) or even holds all
folio references (-> owns all mappings, and all references are from
mappings).

As long as only two MMs map folio pages at a time, we can reliably and
precisely identify whether a large folio is "mapped shared" or "mapped
exclusively".

Any additional MM that starts mapping the folio while there are no free
slots becomes an "untracked MM".  If one such "untracked MM" is the last
one mapping a folio exclusively, we will not detect the folio as "mapped
exclusively" but instead as "maybe mapped shared".  (exception: only a
single mapping remains)

So that's where the approach gets imprecise.

For now, we use a bit-spinlock to sync the large mapcount + slots, and
make sure we do keep the machinery fast, to not degrade (un)map
performance drastically: for example, we make sure to only use a single
atomic (when grabbing the bit-spinlock), like we would already perform
when updating the large mapcount.


3 CONFIG_NO_PAGE_MAPCOUNT
=========================

patch #15 -> #20 spell out and document what exactly is affected when not
maintaining the per-page mapcounts in large folios anymore.

Most importantly, as we cannot maintain folio->_nr_pages_mapped anymore
when (un)mapping pages, we'll account a complete folio as mapped if a
single page is mapped.  In addition, we'll not detect partially mapped
anonymous folios as such in all cases yet.

Likely less relevant changes include that we might now under-estimate the
USS (Unique Set Size) of a process, but never over-estimate it.

The goal is to make CONFIG_NO_PAGE_MAPCOUNT the default at some point, to
then slowly make it the only option, as we learn about real-life impacts
and possible ways to mitigate them.


4 Performance
=============

Detailed performance numbers were included in v1 [3], and not that much
changed between v1 and v2.

I did plenty of measurements on different systems in the meantime, that
all revealed slightly different results.

The pte-mapped-folio micro-benchmarks [4] are fairly sensitive to code
layout changes on some systems.  Especially the fork() benchmark started
being more-shaky-than-before on recent kernels for some reason.

In summary, with my micro-benchmarks:

* Small folios are not impacted.

* CoW performance seems to be mostly unchanged across all folios sizes.

* CoW reuse performance of large folios now matches CoW reuse
  performance of small folios, because we now actually implement the CoW
  reuse optimization.  On an Intel Xeon Silver 4210R I measured a ~65%
  reduction in runtime, on an arm64 system I measured ~54% reduction.

* munmap() performance improves with CONFIG_NO_PAGE_MAPCOUNT.  I saw
  double-digit % reduction (up to ~30% on an Intel Xeon Silver 4210R and
  up to ~70% on an AmpereOne A192-32X) with larger folios.  The larger the
  folios, the larger the performance improvement.

* munmao() performance very slightly (couple percent) degrades without
  CONFIG_NO_PAGE_MAPCOUNT for smaller folios.  For larger folios, there
  seems to be no change at all.

* fork() performance improves with CONFIG_NO_PAGE_MAPCOUNT.  I saw
  double-digit % reduction (up to ~20% on an Intel Xeon Silver 4210R and
  up to ~10% on an AmpereOne A192-32X) with larger folios.  The larger the
  folios, the larger the performance improvement.

* While fork() performance without CONFIG_NO_PAGE_MAPCOUNT seems to be
  almost unchanged on some systems, I saw some degradation for smaller
  folios on the AmpereOne A192-32X.  I did not investigate the details
  yet, but I suspect code layout changes or suboptimal code placement /
  inlining.

I'm not to worried about the fork() micro-benchmarks for smaller folios
given how shaky the results are lately and by how much we improved fork()
performance recently.

I also ran case-anon-cow-rand and case-anon-cow-seq part of
vm-scalability, to assess the scalability and the impact of the
bit-spinlock.  My measurements on a two 2-socket 10-core Intel Xeon Silver
4210R CPU revealed no significant changes.

Similarly, running these benchmarks with 2 MiB THPs enabled on the
AmpereOne A192-32X with 192 cores, I got < 1% difference with < 1% stdev,
which is nice.

So far, I did not get my hands on a similarly large system with multiple
sockets.

I found no other fitting scalability benchmarks that seem to really hammer
on concurrent mapping/unmapping of large folio pages like
case-anon-cow-seq does.


5 Concerns
==========

5.1 Bit spinlock
----------------

I'm not quite happy about the bit-spinlock, but so far it does not seem to
affect scalability in my measurements.

If it ever becomes a problem we could either investigate improving the
locking, or simply stopping the MM tracking once there are "too many
mappings" and simply assume that the folio is "mapped shared" until it was
freed.

This would be similar (but slightly different) to the "0,1,2,stopped"
counting idea Willy had at some point.  Adding that logic to "stop
tracking" adds more code to the hot path, so I avoided that for now.


5.2 folio_maybe_mapped_shared()
-------------------------------

I documented the change from folio_likely_mapped_shared() to
folio_maybe_mapped_shared() quite extensively.  If we run into surprises,
I have some ideas on how to resolve them.  For now, I think we should be
fine.


5.3 Added code to map/unmap hot path
------------------------------------

So far, it looks like the added code on the rmap hot path does not really
seem to matter much in the bigger picture.  I'd like to further reduce it
(and possibly improve fork() performance further), but I don't easily see
how right now.  Well, and I am out of puff 🙂

Having that said, alternatives I considered (e.g., per-MM per-folio
mapcount) would add a lot more overhead to these hot paths.


6 Future Work
=============

6.1 Large mapcount
------------------

It would be very handy if the large mapcount would count how often folio
pages are actually mapped into page tables: a PMD on x86-64 would count
512 times.  Calculating the average per-page mapcount will be easy, and
remapping (PMD->PTE) folios would get even faster.

That would also remove the need for the entire mapcount (except for
PMD-sized folios for memory statistics reasons ...), and allow for mapping
folios larger than PMDs (e.g., 4 MiB) easily.

We likely would also have to take the same number of folio references to
make our folio_mapcount() == folio_ref_count() work, and we'd want to be
able to avoid mapcount+refcount overflows: this could already become an
issue with pte-mapped PUD-sized folios (fsdax).

One approach we discussed in the THP cabal meeting is (1) extending the
mapcount for large folios to 64bit (at least on 64bit systems) and (2)
keeping the refcount at 32bit, but (3) having exactly one reference if the
the mapcount != 0.

It should be doable, but there are some corner cases to consider on the
unmap path; it is something that I will be looking into next.


6.2 hugetlb
-----------

I'd love to make use of the same tracking also for hugetlb.

The real problem is PMD table sharing: getting a page mapped by MM X and
unmapped by MM Y will not work.  With mshare, that problem should not
exist (all mapping/unmapping will be routed through the mshare MM).

[1] https://lwn.net/Articles/974223/
[2] https://lore.kernel.org/linux-mm/a9922f58-8129-4f15-b160-e0ace581bcbe@redhat.com/T/
[3] https://lkml.kernel.org/r/20240829165627.2256514-1-david@redhat.com
[4] https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/pte-mapped-folio-benchmarks.c


This patch (of 20):

Let's factor it out into a simple helper function.  This helper will also
come in handy when working with code where we know that our folio is
large.

Maybe in the future we'll have the order readily available for small and
large folios; in that case, folio_large_order() would simply translate to
folio_order().

Link: https://lkml.kernel.org/r/20250303163014.1128035-1-david@redhat.com
Link: https://lkml.kernel.org/r/20250303163014.1128035-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirks^H^Hski <luto@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: tejun heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().

An example from v5.4, similar problem also exists in upstream:

    crash> bt 2091206
    PID: 2091206  TASK: ffff2050df92a300  CPU: 109  COMMAND: "kworker/u260:0"
     #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
     #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
     #2 [ffff800084a2f880] schedule at ffff800040bfa4b4
     #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
     #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
     #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
     #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
     #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
     #8 [ffff800084a2fa60] generic_make_request at ffff800040570138
     #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
    #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
    #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
    #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
    #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
    #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
    #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
    #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
    #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
    #18 [ffff800084a2fe70] kthread at ffff800040118de4

After commit 2def284 ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.

Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait().

Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Tianxiang Peng <txpeng@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if
the TCP connection isn't established when nvmet_tcp_set_queue_sock() is
called then queue->state_change isn't set and sock->sk->sk_state_change
isn't replaced.

As such we don't need to restore sock->sk->sk_state_change if
queue->state_change is NULL.

This avoids NULL pointer dereferences such as this:

[  286.462026][    C0] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  286.462814][    C0] #PF: supervisor instruction fetch in kernel mode
[  286.463796][    C0] #PF: error_code(0x0010) - not-present page
[  286.464392][    C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0
[  286.465086][    C0] Oops: Oops: 0010 [#1] SMP KASAN PTI
[  286.465559][    C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary)
[  286.466393][    C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[  286.467147][    C0] RIP: 0010:0x0
[  286.467420][    C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[  286.467977][    C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246
[  286.468425][    C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43
[  286.469019][    C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100
[  286.469545][    C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c
[  286.470072][    C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3
[  286.470585][    C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268
[  286.471070][    C0] FS:  00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000
[  286.471644][    C0] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  286.472543][    C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0
[  286.473500][    C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  286.474467][    C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
[  286.475453][    C0] Call Trace:
[  286.476102][    C0]  <IRQ>
[  286.476719][    C0]  tcp_fin+0x2bb/0x440
[  286.477429][    C0]  tcp_data_queue+0x190f/0x4e60
[  286.478174][    C0]  ? __build_skb_around+0x234/0x330
[  286.478940][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.479659][    C0]  ? __pfx_tcp_data_queue+0x10/0x10
[  286.480431][    C0]  ? tcp_try_undo_loss+0x640/0x6c0
[  286.481196][    C0]  ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[  286.482046][    C0]  ? kvm_clock_get_cycles+0x14/0x30
[  286.482769][    C0]  ? ktime_get+0x66/0x150
[  286.483433][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.484146][    C0]  tcp_rcv_established+0x6e4/0x2050
[  286.484857][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.485523][    C0]  ? ipv4_dst_check+0x160/0x2b0
[  286.486203][    C0]  ? __pfx_tcp_rcv_established+0x10/0x10
[  286.486917][    C0]  ? lock_release+0x217/0x2c0
[  286.487595][    C0]  tcp_v4_do_rcv+0x4d6/0x9b0
[  286.488279][    C0]  tcp_v4_rcv+0x2af8/0x3e30
[  286.488904][    C0]  ? raw_local_deliver+0x51b/0xad0
[  286.489551][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.490198][    C0]  ? __pfx_tcp_v4_rcv+0x10/0x10
[  286.490813][    C0]  ? __pfx_raw_local_deliver+0x10/0x10
[  286.491487][    C0]  ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack]
[  286.492275][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.492900][    C0]  ip_protocol_deliver_rcu+0x8f/0x370
[  286.493579][    C0]  ip_local_deliver_finish+0x297/0x420
[  286.494268][    C0]  ip_local_deliver+0x168/0x430
[  286.494867][    C0]  ? __pfx_ip_local_deliver+0x10/0x10
[  286.495498][    C0]  ? __pfx_ip_local_deliver_finish+0x10/0x10
[  286.496204][    C0]  ? ip_rcv_finish_core+0x19a/0x1f20
[  286.496806][    C0]  ? lock_release+0x217/0x2c0
[  286.497414][    C0]  ip_rcv+0x455/0x6e0
[  286.497945][    C0]  ? __pfx_ip_rcv+0x10/0x10
[  286.498550][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.499137][    C0]  ? __pfx_ip_rcv_finish+0x10/0x10
[  286.499763][    C0]  ? lock_release+0x217/0x2c0
[  286.500327][    C0]  ? dl_scaled_delta_exec+0xd1/0x2c0
[  286.500922][    C0]  ? __pfx_ip_rcv+0x10/0x10
[  286.501480][    C0]  __netif_receive_skb_one_core+0x166/0x1b0
[  286.502173][    C0]  ? __pfx___netif_receive_skb_one_core+0x10/0x10
[  286.502903][    C0]  ? lock_acquire+0x2b2/0x310
[  286.503487][    C0]  ? process_backlog+0x372/0x1350
[  286.504087][    C0]  ? lock_release+0x217/0x2c0
[  286.504642][    C0]  process_backlog+0x3b9/0x1350
[  286.505214][    C0]  ? process_backlog+0x372/0x1350
[  286.505779][    C0]  __napi_poll.constprop.0+0xa6/0x490
[  286.506363][    C0]  net_rx_action+0x92e/0xe10
[  286.506889][    C0]  ? __pfx_net_rx_action+0x10/0x10
[  286.507437][    C0]  ? timerqueue_add+0x1f0/0x320
[  286.507977][    C0]  ? sched_clock_cpu+0x68/0x540
[  286.508492][    C0]  ? lock_acquire+0x2b2/0x310
[  286.509043][    C0]  ? kvm_sched_clock_read+0xd/0x20
[  286.509607][    C0]  ? handle_softirqs+0x1aa/0x7d0
[  286.510187][    C0]  handle_softirqs+0x1f2/0x7d0
[  286.510754][    C0]  ? __pfx_handle_softirqs+0x10/0x10
[  286.511348][    C0]  ? irqtime_account_irq+0x181/0x290
[  286.511937][    C0]  ? __dev_queue_xmit+0x85d/0x3450
[  286.512510][    C0]  do_softirq.part.0+0x89/0xc0
[  286.513100][    C0]  </IRQ>
[  286.513548][    C0]  <TASK>
[  286.513953][    C0]  __local_bh_enable_ip+0x112/0x140
[  286.514522][    C0]  ? __dev_queue_xmit+0x85d/0x3450
[  286.515072][    C0]  __dev_queue_xmit+0x872/0x3450
[  286.515619][    C0]  ? nft_do_chain+0xe16/0x15b0 [nf_tables]
[  286.516252][    C0]  ? __pfx___dev_queue_xmit+0x10/0x10
[  286.516817][    C0]  ? selinux_ip_postroute+0x43c/0xc50
[  286.517433][    C0]  ? __pfx_selinux_ip_postroute+0x10/0x10
[  286.518061][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.518606][    C0]  ? ip_output+0x164/0x4a0
[  286.519149][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.519671][    C0]  ? ip_finish_output2+0x17d5/0x1fb0
[  286.520258][    C0]  ip_finish_output2+0xb4b/0x1fb0
[  286.520787][    C0]  ? __pfx_ip_finish_output2+0x10/0x10
[  286.521355][    C0]  ? __ip_finish_output+0x15d/0x750
[  286.521890][    C0]  ip_output+0x164/0x4a0
[  286.522372][    C0]  ? __pfx_ip_output+0x10/0x10
[  286.522872][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.523402][    C0]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
[  286.524031][    C0]  ? __pfx_ip_finish_output+0x10/0x10
[  286.524605][    C0]  ? __ip_queue_xmit+0x999/0x2260
[  286.525200][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.525744][    C0]  ? ipv4_dst_check+0x16a/0x2b0
[  286.526279][    C0]  ? lock_release+0x217/0x2c0
[  286.526793][    C0]  __ip_queue_xmit+0x1883/0x2260
[  286.527324][    C0]  ? __skb_clone+0x54c/0x730
[  286.527827][    C0]  __tcp_transmit_skb+0x209b/0x37a0
[  286.528374][    C0]  ? __pfx___tcp_transmit_skb+0x10/0x10
[  286.528952][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.529472][    C0]  ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[  286.530152][    C0]  ? trace_hardirqs_on+0x12/0x120
[  286.530691][    C0]  tcp_write_xmit+0xb81/0x88b0
[  286.531224][    C0]  ? mod_memcg_state+0x4d/0x60
[  286.531736][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.532253][    C0]  __tcp_push_pending_frames+0x90/0x320
[  286.532826][    C0]  tcp_send_fin+0x141/0xb50
[  286.533352][    C0]  ? __pfx_tcp_send_fin+0x10/0x10
[  286.533908][    C0]  ? __local_bh_enable_ip+0xab/0x140
[  286.534495][    C0]  inet_shutdown+0x243/0x320
[  286.535077][    C0]  nvme_tcp_alloc_queue+0xb3b/0x2590 [nvme_tcp]
[  286.535709][    C0]  ? do_raw_spin_lock+0x129/0x260
[  286.536314][    C0]  ? __pfx_nvme_tcp_alloc_queue+0x10/0x10 [nvme_tcp]
[  286.536996][    C0]  ? do_raw_spin_unlock+0x54/0x1e0
[  286.537550][    C0]  ? _raw_spin_unlock+0x29/0x50
[  286.538127][    C0]  ? do_raw_spin_lock+0x129/0x260
[  286.538664][    C0]  ? __pfx_do_raw_spin_lock+0x10/0x10
[  286.539249][    C0]  ? nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp]
[  286.539892][    C0]  ? __wake_up+0x40/0x60
[  286.540392][    C0]  nvme_tcp_alloc_admin_queue+0xd5/0x340 [nvme_tcp]
[  286.541047][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.541589][    C0]  nvme_tcp_setup_ctrl+0x8b/0x7a0 [nvme_tcp]
[  286.542254][    C0]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
[  286.542887][    C0]  ? __pfx_nvme_tcp_setup_ctrl+0x10/0x10 [nvme_tcp]
[  286.543568][    C0]  ? trace_hardirqs_on+0x12/0x120
[  286.544166][    C0]  ? _raw_spin_unlock_irqrestore+0x35/0x60
[  286.544792][    C0]  ? nvme_change_ctrl_state+0x196/0x2e0 [nvme_core]
[  286.545477][    C0]  nvme_tcp_create_ctrl+0x839/0xb90 [nvme_tcp]
[  286.546126][    C0]  nvmf_dev_write+0x3db/0x7e0 [nvme_fabrics]
[  286.546775][    C0]  ? rw_verify_area+0x69/0x520
[  286.547334][    C0]  vfs_write+0x218/0xe90
[  286.547854][    C0]  ? do_syscall_64+0x9f/0x190
[  286.548408][    C0]  ? trace_hardirqs_on_prepare+0xdb/0x120
[  286.549037][    C0]  ? syscall_exit_to_user_mode+0x93/0x280
[  286.549659][    C0]  ? __pfx_vfs_write+0x10/0x10
[  286.550259][    C0]  ? do_syscall_64+0x9f/0x190
[  286.550840][    C0]  ? syscall_exit_to_user_mode+0x8e/0x280
[  286.551516][    C0]  ? trace_hardirqs_on_prepare+0xdb/0x120
[  286.552180][    C0]  ? syscall_exit_to_user_mode+0x93/0x280
[  286.552834][    C0]  ? ksys_read+0xf5/0x1c0
[  286.553386][    C0]  ? __pfx_ksys_read+0x10/0x10
[  286.553964][    C0]  ksys_write+0xf5/0x1c0
[  286.554499][    C0]  ? __pfx_ksys_write+0x10/0x10
[  286.555072][    C0]  ? trace_hardirqs_on_prepare+0xdb/0x120
[  286.555698][    C0]  ? syscall_exit_to_user_mode+0x93/0x280
[  286.556319][    C0]  ? do_syscall_64+0x54/0x190
[  286.556866][    C0]  do_syscall_64+0x93/0x190
[  286.557420][    C0]  ? rcu_read_unlock+0x17/0x60
[  286.557986][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.558526][    C0]  ? lock_release+0x217/0x2c0
[  286.559087][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.559659][    C0]  ? count_memcg_events.constprop.0+0x4a/0x60
[  286.560476][    C0]  ? exc_page_fault+0x7a/0x110
[  286.561064][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.561647][    C0]  ? lock_release+0x217/0x2c0
[  286.562257][    C0]  ? do_user_addr_fault+0x171/0xa00
[  286.562839][    C0]  ? do_user_addr_fault+0x4a2/0xa00
[  286.563453][    C0]  ? irqentry_exit_to_user_mode+0x84/0x270
[  286.564112][    C0]  ? rcu_is_watching+0x11/0xb0
[  286.564677][    C0]  ? irqentry_exit_to_user_mode+0x84/0x270
[  286.565317][    C0]  ? trace_hardirqs_on_prepare+0xdb/0x120
[  286.565922][    C0]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  286.566542][    C0] RIP: 0033:0x7fe3c05e6504
[  286.567102][    C0] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 8b 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
[  286.568931][    C0] RSP: 002b:00007fff76444f58 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[  286.569807][    C0] RAX: ffffffffffffffda RBX: 000000003b40d930 RCX: 00007fe3c05e6504
[  286.570621][    C0] RDX: 00000000000000cf RSI: 000000003b40d930 RDI: 0000000000000003
[  286.571443][    C0] RBP: 0000000000000003 R08: 00000000000000cf R09: 000000003b40d930
[  286.572246][    C0] R10: 0000000000000000 R11: 0000000000000202 R12: 000000003b40cd60
[  286.573069][    C0] R13: 00000000000000cf R14: 00007fe3c07417f8 R15: 00007fe3c073502e
[  286.573886][    C0]  </TASK>

Closes: https://lore.kernel.org/linux-nvme/5hdonndzoqa265oq3bj6iarwtfk5dewxxjtbjvn5uqnwclpwt6@a2n6w3taxxex/
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

… prevent wrong idmap generation

The PTE_MAYBE_NG macro sets the nG page table bit according to the value
of "arm64_use_ng_mappings". This variable is currently placed in the
.bss section. create_init_idmap() is called before the .bss section
initialisation which is done in early_map_kernel(). Therefore,
data/test_prot in create_init_idmap() could be set incorrectly through
the PAGE_KERNEL -> PROT_DEFAULT -> PTE_MAYBE_NG macros.

   # llvm-objdump-21 --syms vmlinux-gcc | grep arm64_use_ng_mappings
     ffff800082f242a8 g     O .bss    0000000000000001 arm64_use_ng_mappings

The create_init_idmap() function disassembly compiled with llvm-21:

  // create_init_idmap()
  ffff80008255c058: d10103f     	sub	sp, sp, #0x40
  ffff80008255c05c: a9017bfd     	stp	x29, x30, [sp, #0x10]
  ffff80008255c060: a90257f6     	stp	x22, x21, [sp, #0x20]
  ffff80008255c064: a9034ff4     	stp	x20, x19, [sp, #0x30]
  ffff80008255c068: 910043fd     	add	x29, sp, #0x10
  ffff80008255c06c: 90003fc8     	adrp	x8, 0xffff800082d54000
  ffff80008255c070: d280e06a     	mov	x10, #0x703     // =1795
  ffff80008255c074: 91400409     	add	x9, x0, #0x1, lsl #12 // =0x1000
  ffff80008255c078: 394a4108     	ldrb	w8, [x8, #0x290] ------------- (1)
  ffff80008255c07c: f2e00d0a     	movk	x10, #0x68, lsl #48
  ffff80008255c080: f90007e9     	str	x9, [sp, #0x8]
  ffff80008255c084: aa0103f3     	mov	x19, x1
  ffff80008255c088: aa0003f4     	mov	x20, x0
  ffff80008255c08c: 14000000     	b	0xffff80008255c08c <__pi_create_init_idmap+0x34>
  ffff80008255c090: aa082d56     	orr	x22, x10, x8, lsl #11 -------- (2)

Note (1) is loading the arm64_use_ng_mappings value in w8 and (2) is set
the text or data prot with the w8 value to set PTE_NG bit. If the .bss
section isn't initialized, x8 could include a garbage value and generate
an incorrect mapping.

Annotate arm64_use_ng_mappings as __read_mostly so that it is placed in
the .data section.

Fixes: 84b04d3 ("arm64: kernel: Create initial ID map from C code")
Cc: stable@vger.kernel.org # 6.9.x
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250502180412.3774883-1-yeoreum.yun@arm.com
[catalin.marinas@arm.com: use __read_mostly instead of __ro_after_init]
[catalin.marinas@arm.com: slight tweaking of the code comment]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

ACPICA commit 1c28da2242783579d59767617121035dafba18c3

This was originally done in NetBSD:
NetBSD/src@b69d1ac
and is the correct alternative to the smattering of `memcpy`s I
previously contributed to this repository.

This also sidesteps the newly strict checks added in UBSAN:
llvm/llvm-project@7926744

Before this change we see the following UBSAN stack trace in Fuchsia:

  #0    0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e
  #1.2  0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c
  #1.1  0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c
  #1    0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c
  #2    0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f
  #3    0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723
  #4    0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e
  #5    0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089
  #6    0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169
  #7    0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a
  #8    0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7
  #9    0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979
  #10   0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f
  #11   0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf
  #12   0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278
  #13   0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87
  #14   0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d
  #15   0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e
  #16   0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad
  #17   0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e
  #18   0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7
  #19   0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342
  #20   0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3
  #21   0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616
  #22   0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323
  #23   0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76
  #24   0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831
  #25   0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc
  #26   0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58
  #27   0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159
  #28   0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414
  #29   0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d
  #30   0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7
  #31   0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66
  #32   0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9
  #33   0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d
  #34   0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983
  #35   0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e
  #36   0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509
  #37   0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958
  #38   0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247
  #39   0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962
  #40   0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30
  #41   0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d

Link: acpica/acpica@1c28da22
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4664267.LvFx2qVVIh@rjwysocki.net
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
[ rjw: Pick up the tag from Tamir ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Biju Das <biju.das.jz@bp.renesas.com> says:

The CAN-FD module on RZ/G3E is very similar to the one on both R-Car V4H
and RZ/G2L, but differs in some hardware parameters:
 * No external clock, but instead has ram clock.
 * Support up to 6 channels.
 * 20 interrupts.

v8->v9:
 * Collected tags.
 * Added missing header bitfield.h.
 * Fixed logical error ch->BIT(ch) in rcar_canfd_global_error().
 * Removed unneeded double space in rcar_canfd_setrnc().
 * Updated commit description in patch#15.
v7->v8:
 * Collected tags.
 * Updated commit description for patch#{5,9,15,16,17}.
 * Replaced the macro RCANFD_GERFL_EEF0_7->RCANFD_GERFL_EEF.
 * Dropped the redundant macro RCANFD_GERFL_EEF(ch).
 * Added patch for dropping the mask operation in RCANFD_GAFLCFG_SETRNC
   macro.
 * Converted RCANFD_GAFLCFG_SETRNC->rcar_canfd_setrnc().
 * Updated RCANFD_GAFLCFG macro by replacing the parameter ch->w, where w
   is the GAFLCFG index used in the hardware manual.
 * Renamed the parameter x->page_num in RCANFD_GAFLECTR_AFLPN macro to
   make it clear.
 * Renamed the parameter x->cftml in RCANFD_CFCC_CFTML macro to make it
   clear.
 * Updated {rzg2l,car_gen3_hw_info} with ch_interface_mode = 0.
 * Updated {rzg2l,rcar_gen3}_hw_info with shared_can_regs = 0.
 * Started using struct rcanfd_regs instead of LUT for reg offsets.
 * Started using struct rcar_canfd_shift_data instead of LUT for shift
   data.
 * Renamed only_internal_clks->external_clk to avoid negation.
 * Updated rcar_canfd_hw_info tables with external_clk entries.
 * Replaced 10->sizeof(name) in scnprintf().
v6->v7:
 * Collected tags
 * Replaced 'aswell'->'as well' in patch#11 commit description.
v5->v6:
 * Replaced RCANFD_RNC_PER_REG macro with rnc_stride variable.
 * Updated commit description for patch#7 and #8
 * Dropped mask_table:
     AFLPN_MASK is replaced by max_aflpn variable.
     CFTML_MASK is replaced by max_cftml variable.
     BITTIMING MASK's are replaced by {nom,data}_bittiming variables.
 * Collected tag from Geert.
v4->v5:
 * Collected tag from Geert.
 * The rules for R-Car Gen3/4 could be kept together, reducing the number
   of lines. Similar change for rzg2l-canfd aswell.
 * Keeping interrupts and resets together allows to keep a clear
   separation between RZ/G2L and RZ/G3E, at the expense of only
   a single line.
 * Retained the tags for binding patches as it is trivial changes.
 * Dropped the unused macro RCANFD_GAFLCFG_GETRNC.
 * Updated macro RCANFD_GERFL_ERR by using gpriv->channels_mask and
   dropped unused macro RCANFD_GERFL_EEF0_7.
 * Replaced RNC mask in RCANFD_GAFLCFG_SETRNC macro by using
   info->num_supported_rules variable.
 * Updated the macro RCANFD_GAFLCFG by using info->rnc_field_width
   variable.
 * Updated shift value in RCANFD_GAFLCFG_SETRNC macro by using a formula
   (32 - (n % rnc_per_reg + 1) * field_width).
 * Replaced the variable name shared_can_reg->shared_can_regs.
 * Improved commit description for patch{#11,#12}by replacing has->have.
 * Dropped RCANFD_EEF_MASK and RCANFD_RNC_MASK as it is taken
   care by gpriv->channels_mask and info->num_supported_rules.
 * Dropped RCANFD_FIRST_RNC_SH and RCANFD_SECOND_RNC_SH by using a
   formula (32 - (n % rnc_per_reg + 1) * rnc_field_width.
 * Improved commit description by "All SoCs supports extenal clock"->
   "All existing SoCs support an external clock".
 * Updated error description in probe as "cannot get enabled ram clock"
 * Updated r9a09g047_hw_info table.
v3->v4:
 * Added Rb tag from Rob for patch#2.
 * Added prefix RCANFD_* to enum rcar_canfd_reg_offset_id.
 * Added prefix RCANFD_* to enum rcar_canfd_mask_id.
 * Added prefix RCANFD_* to enum rcar_canfd_shift_id.
v2->v3:
 * Collected tags.
 * Dropped reg_gen4() and is_gen4() by adding mask_table, shift_table,
   regs, ch_interface_mode and shared_can_reg variables to
   struct rcar_canfd_hw_info.
v1->v2:
 * Split the series with fixes patch separately.
 * Added patch for Simplify rcar_canfd_probe() using
   of_get_available_child_by_name() as dependency patch hit on can-next.
 * Added Rb tag from Vincent Mailhol.
 * Dropped redundant comment from commit description for patch#3.

Link: https://patch.msgid.link/20250417054320.14100-1-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Drivers such as rxe, which use virtual DMA, must not call into the DMA
mapping core since they lack physical DMA capabilities. Otherwise, a NULL
pointer dereference is observed as shown below. This patch ensures the RDMA
core handles virtual and physical DMA paths appropriately.

This fixes the following kernel oops:

 BUG: kernel NULL pointer dereference, address: 00000000000002fc
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 1028eb067 P4D 1028eb067 PUD 105da0067 PMD 0
 Oops: Oops: 0000 [#1] SMP NOPTI
 CPU: 3 UID: 1000 PID: 1854 Comm: python3 Tainted: G        W           6.15.0-rc1+ #11 PREEMPT(voluntary)
 Tainted: [W]=WARN
 Hardware name: Trigkey Key N/Key N, BIOS KEYN101 09/02/2024
 RIP: 0010:hmm_dma_map_alloc+0x25/0x100
 Code: 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 49 89 d6 49 c1 e6 0c 41 55 41 54 53 49 39 ce 0f 82 c6 00 00 00 49 89 fc <f6> 87 fc 02 00 00 20 0f 84 af 00 00 00 49 89 f5 48 89 d3 49 89 cf
 RSP: 0018:ffffd3d3420eb830 EFLAGS: 00010246
 RAX: 0000000000001000 RBX: ffff8b727c7f7400 RCX: 0000000000001000
 RDX: 0000000000000001 RSI: ffff8b727c7f74b0 RDI: 0000000000000000
 RBP: ffffd3d3420eb858 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
 R13: 00007262a622a000 R14: 0000000000001000 R15: ffff8b727c7f74b0
 FS:  00007262a62a1080(0000) GS:ffff8b762ac3e000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000002fc CR3: 000000010a1f0004 CR4: 0000000000f72ef0
 PKRU: 55555554
 Call Trace:
  <TASK>
  ib_init_umem_odp+0xb6/0x110 [ib_uverbs]
  ib_umem_odp_get+0xf0/0x150 [ib_uverbs]
  rxe_odp_mr_init_user+0x71/0x170 [rdma_rxe]
  rxe_reg_user_mr+0x217/0x2e0 [rdma_rxe]
  ib_uverbs_reg_mr+0x19e/0x2e0 [ib_uverbs]
  ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd9/0x150 [ib_uverbs]
  ib_uverbs_cmd_verbs+0xd19/0xee0 [ib_uverbs]
  ? mmap_region+0x63/0xd0
  ? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]
  ib_uverbs_ioctl+0xba/0x130 [ib_uverbs]
  __x64_sys_ioctl+0xa4/0xe0
  x64_sys_call+0x1178/0x2660
  do_syscall_64+0x7e/0x170
  ? syscall_exit_to_user_mode+0x4e/0x250
  ? do_syscall_64+0x8a/0x170
  ? do_syscall_64+0x8a/0x170
  ? syscall_exit_to_user_mode+0x4e/0x250
  ? do_syscall_64+0x8a/0x170
  ? syscall_exit_to_user_mode+0x4e/0x250
  ? do_syscall_64+0x8a/0x170
  ? do_user_addr_fault+0x1d2/0x8d0
  ? irqentry_exit_to_user_mode+0x43/0x250
  ? irqentry_exit+0x43/0x50
  ? exc_page_fault+0x93/0x1d0
  entry_SYSCALL_64_after_hwframe+0x76/0x7e
 RIP: 0033:0x7262a6124ded
 Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1a 48 8b 45 c8 64 48 2b 04 25 28 00 00 00
 RSP: 002b:00007fffd08c3960 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
 RAX: ffffffffffffffda RBX: 00007fffd08c39f0 RCX: 00007262a6124ded
 RDX: 00007fffd08c3a10 RSI: 00000000c0181b01 RDI: 0000000000000007
 RBP: 00007fffd08c39b0 R08: 0000000014107820 R09: 00007fffd08c3b44
 R10: 000000000000000c R11: 0000000000000246 R12: 00007fffd08c3b44
 R13: 000000000000000c R14: 00007fffd08c3b58 R15: 0000000014107960
  </TASK>

Fixes: 1efe8c0 ("RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage")
Closes: https://lore.kernel.org/all/3e8f343f-7d66-4f7a-9f08-3910623e322f@gmail.com/
Signed-off-by: Daisuke Matsuda <dskmtsd@gmail.com>
Link: https://patch.msgid.link/20250524144328.4361-1-dskmtsd@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

…th()

KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth().

Call Trace:
[   97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8
[   97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550
[   97.285732]
[   97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11
[   97.287032] Hardware name: linux,dummy-virt (DT)
[   97.287815] Call trace:
[   97.288279]  dump_backtrace+0xa0/0x128
[   97.288946]  show_stack+0x20/0x38
[   97.289551]  dump_stack_lvl+0x78/0xc8
[   97.290203]  print_address_description.constprop.0+0x84/0x3c8
[   97.291159]  print_report+0xb0/0x280
[   97.291792]  kasan_report+0x84/0xd0
[   97.292421]  __asan_load8+0x9c/0xc0
[   97.293042]  regs_get_kernel_stack_nth+0xa8/0xc8
[   97.293835]  process_fetch_insn+0x770/0xa30
[   97.294562]  kprobe_trace_func+0x254/0x3b0
[   97.295271]  kprobe_dispatcher+0x98/0xe0
[   97.295955]  kprobe_breakpoint_handler+0x1b0/0x210
[   97.296774]  call_break_hook+0xc4/0x100
[   97.297451]  brk_handler+0x24/0x78
[   97.298073]  do_debug_exception+0xac/0x178
[   97.298785]  el1_dbg+0x70/0x90
[   97.299344]  el1h_64_sync_handler+0xcc/0xe8
[   97.300066]  el1h_64_sync+0x78/0x80
[   97.300699]  kernel_clone+0x0/0x500
[   97.301331]  __arm64_sys_clone+0x70/0x90
[   97.302084]  invoke_syscall+0x68/0x198
[   97.302746]  el0_svc_common.constprop.0+0x11c/0x150
[   97.303569]  do_el0_svc+0x38/0x50
[   97.304164]  el0_svc+0x44/0x1d8
[   97.304749]  el0t_64_sync_handler+0x100/0x130
[   97.305500]  el0t_64_sync+0x188/0x190
[   97.306151]
[   97.306475] The buggy address belongs to stack of task 1.sh/2550
[   97.307461]  and is located at offset 0 in frame:
[   97.308257]  __se_sys_clone+0x0/0x138
[   97.308910]
[   97.309241] This frame has 1 object:
[   97.309873]  [48, 184) 'args'
[   97.309876]
[   97.310749] The buggy address belongs to the virtual mapping at
[   97.310749]  [ffff800089270000, ffff800089279000) created by:
[   97.310749]  dup_task_struct+0xc0/0x2e8
[   97.313347]
[   97.313674] The buggy address belongs to the physical page:
[   97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a
[   97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff)
[   97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000
[   97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[   97.319445] page dumped because: kasan: bad access detected
[   97.320371]
[   97.320694] Memory state around the buggy address:
[   97.321511]  ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   97.322681]  ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00
[   97.325023]                          ^
[   97.325683]  ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3
[   97.326856]  ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00

This issue seems to be related to the behavior of some gcc compilers and
was also fixed on the s390 architecture before:

 commit d93a855 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")

As described in that commit, regs_get_kernel_stack_nth() has confirmed that
`addr` is on the stack, so reading the value at `*addr` should be allowed.
Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case.

Fixes: 0a8ea52 ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Link: https://lore.kernel.org/r/20250604005533.1278992-1-wutengda@huaweicloud.com
[will: Use '*addr' as the argument to READ_ONCE_NOCHECK()]
Signed-off-by: Will Deacon <will@kernel.org>

Since commit 6b9f29b ("riscv: Enable pcpu page first chunk
allocator"), if NUMA is enabled, the page percpu allocator may be used
on very sparse configurations, or when requested on boot with
percpu_alloc=page.

In that case, percpu data gets put in the vmalloc area. However,
sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data,
and simply assumes that __pa() would work. This causes the just started
hart to immediately access an invalid address and hang.

Fortunately, struct sbi_hart_boot_data is not too large, so we can
simply allocate an array for boot_data statically, putting it in the
kernel image.

This fixes NUMA=y SMP boot on Sophgo SG2042.

To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then
run with:

  qemu-system-riscv64 -M virt -smp 2 -nographic \
    -kernel arch/riscv/boot/Image \
    -append "percpu_alloc=page"

Kernel output:

[    0.000000] Booting Linux on hartid 0
[    0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025
...
[    0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712
...
[    0.083192] smp: Bringing up secondary CPUs ...
[    0.086722] ------------[ cut here ]------------
[    0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080)
[    0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8
[    0.088376] Modules linked in:
[    0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE
[    0.088833] Hardware name: riscv-virtio,qemu (DT)
[    0.088948] epc : __virt_to_phys+0xae/0xe8
[    0.089001]  ra : __virt_to_phys+0xae/0xe8
[    0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0
[    0.089057]  gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976
[    0.089076]  t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0
[    0.089095]  s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000
[    0.089113]  a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[    0.089131]  a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
[    0.089155]  s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001
[    0.089174]  s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec
[    0.089193]  s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000
[    0.089211]  s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7
[    0.089960]  t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8
[    0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003
[    0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8
[    0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8
[    0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c
[    0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258
[    0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c
[    0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc
[    0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244
[    0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90
[    0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118
[    0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8
[    0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4
[    0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c
[    0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0
[    0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18
[    0.090560] ---[ end trace 0000000000000000 ]---
[    1.179875] CPU1: failed to come online
[    1.190324] smp: Brought up 1 node, 1 CPU

Cc: stable@vger.kernel.org
Reported-by: Han Gao <rabenda.cn@gmail.com>
Fixes: 6b9f29b ("riscv: Enable pcpu page first chunk allocator")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250624-riscv-hsm-boot-data-array-v1-1-50b5eeafbe61@iscas.ac.cn
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>

cmpxchg_user_key() may be executed with a non-zero key; if then the storage
key of the page which belongs to the cmpxchg_user_key() code contains a key
with fetch-protection enabled the result is a protection exception:

Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 000000000000080b
Fault in home space mode while using kernel ASCE.
AS:0000000002528007 R3:00000001ffffc007 S:00000001ffffb801 P:000000000000013d
Oops: 0004 ilc:1 [#1]SMP
Modules linked in:
CPU: 3 UID: 0 PID: 791 Comm: memop Not tainted 6.16.0-rc1-00006-g3b568201d0a6-dirty #11 NONE
Hardware name: IBM 3931 A01 704 (z/VM 7.4.0)
Krnl PSW : 0794f00180000000 000003ffe0f4d91e (__cmpxchg_user_key1+0xbe/0x190)
           R:0 T:1 IO:1 EX:1 Key:9 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
Krnl GPRS: 070003ffdfbf6af0 0000000000070000 0000000095b5a300 0000000000000000
           00000000f1000000 0000000000000000 0000000000000090 0000000000000000
           0000000000000040 0000000000000018 000003ff9b23d000 0000037fe0ef7bd8
           000003ffdfbf7500 00000000962e4000 0000037f00ffffff 0000037fe0ef7aa0
Krnl Code: 000003ffe0f4d912: ad03f0a0            stosm   160(%r15),3
           000003ffe0f4d916: a7780000            lhi     %r7,0
          #000003ffe0f4d91a: b20a6000            spka    0(%r6)
          >000003ffe0f4d91e: b2790100            sacf    256
           000003ffe0f4d922: a56f0080            llill   %r6,128
           000003ffe0f4d926: 5810a000            l       %r1,0(%r10)
           000003ffe0f4d92a: 141e                nr      %r1,%r14
           000003ffe0f4d92c: c0e7ffffffff        xilf    %r14,4294967295
Call Trace:
 [<000003ffe0f4d91e>] __cmpxchg_user_key1+0xbe/0x190
 [<000003ffe0189c6e>] cmpxchg_guest_abs_with_key+0x2fe/0x370
 [<000003ffe016d28e>] kvm_s390_vm_mem_op_cmpxchg+0x17e/0x350
 [<000003ffe0173284>] kvm_arch_vm_ioctl+0x354/0x6f0
 [<000003ffe015fedc>] kvm_vm_ioctl+0x2cc/0x6e0
 [<000003ffe05348ae>] vfs_ioctl+0x2e/0x70
 [<000003ffe0535e70>] __s390x_sys_ioctl+0xe0/0x100
 [<000003ffe0f40f06>] __do_syscall+0x136/0x340
 [<000003ffe0f4cb2e>] system_call+0x6e/0x90
Last Breaking-Event-Address:
 [<000003ffe0f4d896>] __cmpxchg_user_key1+0x36/0x190

Fix this by defining all code ranges within cmpxchg_user_key() functions
which may be executed with a non-default key and explicitly initialize
storage keys by calling skey_regions_initialize().

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

Heiko Carstens says:

===================
A rather large series which is supposed to fix the crash below[1], which was
seen when running the memop kernel kvm selftest.

Problem is that cmpxchg_user_key() is executing code with a non-default
key. If a system is IPL'ed with "LOAD NORMAL", and in addition the previous
system used storage keys where the fetch-protection bit is set for some pages,
and the cmpxchg_user_key() is located within such page a protection exception
will happen when executing such code.

Idea of this series is to register all code locations running with a
non-default key at compile time. All functions, which run with a non-default
key, then must explicitly call an init function which initializes the storage
key of all pages containing such code locations with default key, which
prevents such protection exceptions.

Furthermore all functions containing code which may be executed with a
non-default access key must be marked with __kprobes to prevent out-of-line
execution of any instruction of such functions, which would result in the same
problem.

By default the kernel will not issue any storage key changing instructions
like before, which will preserve the keyless-subset mode optimizations in
hosts.

Other possible implementations which I discarded:

- Moving the code to an own section. This would require an s390 specific
  change to modpost.c, which complains about section mismatches (EX_TABLE
  entries in non-default text section). No other architecture has something
  similar, so let's keep this architecture specific hack local.

- Just apply the default storage key to the whole kprobes text
  section. However this would add special s390 semantics to the kprobes text
  section, which no other architecture has. History has shown that such hacks
  fire back sooner or later.

Furthermore, and to keep this whole stuff quite simple, this only works for
code locations in core kernel code, not within modules. After this series
there is no module code left with such code, and as of now I don't see any new
kernel code which runs with a non-default access key.

Note: the original crash can be reproduced by replacing

page_set_storage_key(real, PAGE_DEFAULT_KEY, 1);

with

page_set_storage_key(real, 8, 1);

in arch/s390/kernel/skey.c:__skey_regions_initialize()

And then run tools/testing/selftests/kvm/s390/memop from the kernel selftests.

[1]:

Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 000000000000080b
Fault in home space mode while using kernel ASCE.
AS:0000000002528007 R3:00000001ffffc007 S:00000001ffffb801 P:000000000000013d
Oops: 0004 ilc:1 [#1]SMP
Modules linked in:
CPU: 3 UID: 0 PID: 791 Comm: memop Not tainted 6.16.0-rc1-00006-g3b568201d0a6-dirty #11 NONE
Hardware name: IBM 3931 A01 704 (z/VM 7.4.0)
Krnl PSW : 0794f00180000000 000003ffe0f4d91e (__cmpxchg_user_key1+0xbe/0x190)
           R:0 T:1 IO:1 EX:1 Key:9 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
Krnl GPRS: 070003ffdfbf6af0 0000000000070000 0000000095b5a300 0000000000000000
           00000000f1000000 0000000000000000 0000000000000090 0000000000000000
           0000000000000040 0000000000000018 000003ff9b23d000 0000037fe0ef7bd8
           000003ffdfbf7500 00000000962e4000 0000037f00ffffff 0000037fe0ef7aa0
Krnl Code: 000003ffe0f4d912: ad03f0a0            stosm   160(%r15),3
           000003ffe0f4d916: a7780000            lhi     %r7,0
          #000003ffe0f4d91a: b20a6000            spka    0(%r6)
          >000003ffe0f4d91e: b2790100            sacf    256
           000003ffe0f4d922: a56f0080            llill   %r6,128
           000003ffe0f4d926: 5810a000            l       %r1,0(%r10)
           000003ffe0f4d92a: 141e                nr      %r1,%r14
           000003ffe0f4d92c: c0e7ffffffff        xilf    %r14,4294967295
Call Trace:
 [<000003ffe0f4d91e>] __cmpxchg_user_key1+0xbe/0x190
 [<000003ffe0189c6e>] cmpxchg_guest_abs_with_key+0x2fe/0x370
 [<000003ffe016d28e>] kvm_s390_vm_mem_op_cmpxchg+0x17e/0x350
 [<000003ffe0173284>] kvm_arch_vm_ioctl+0x354/0x6f0
 [<000003ffe015fedc>] kvm_vm_ioctl+0x2cc/0x6e0
 [<000003ffe05348ae>] vfs_ioctl+0x2e/0x70
 [<000003ffe0535e70>] __s390x_sys_ioctl+0xe0/0x100
 [<000003ffe0f40f06>] __do_syscall+0x136/0x340
 [<000003ffe0f4cb2e>] system_call+0x6e/0x90
Last Breaking-Event-Address:
 [<000003ffe0f4d896>] __cmpxchg_user_key1+0x36/0x190
===================

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

pert script tests fails with segmentation fault as below:

  92: perf script tests:
  --- start ---
  test child forked, pid 103769
  DB test
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.012 MB /tmp/perf-test-script.7rbftEpOzX/perf.data (9 samples) ]
  /usr/libexec/perf-core/tests/shell/script.sh: line 35:
  103780 Segmentation fault      (core dumped)
  perf script -i "${perfdatafile}" -s "${db_test}"
  --- Cleaning up ---
  ---- end(-1) ----
  92: perf script tests                                               : FAILED!

Backtrace pointed to :
	#0  0x0000000010247dd0 in maps.machine ()
	#1  0x00000000101d178c in db_export.sample ()
	#2  0x00000000103412c8 in python_process_event ()
	#3  0x000000001004eb28 in process_sample_event ()
	#4  0x000000001024fcd0 in machines.deliver_event ()
	#5  0x000000001025005c in perf_session.deliver_event ()
	#6  0x00000000102568b0 in __ordered_events__flush.part.0 ()
	#7  0x0000000010251618 in perf_session.process_events ()
	#8  0x0000000010053620 in cmd_script ()
	#9  0x00000000100b5a28 in run_builtin ()
	#10 0x00000000100b5f94 in handle_internal_command ()
	#11 0x0000000010011114 in main ()

Further investigation reveals that this occurs in the `perf script tests`,
because it uses `db_test.py` script. This script sets `perf_db_export_mode = True`.

With `perf_db_export_mode` enabled, if a sample originates from a hypervisor,
perf doesn't set maps for "[H]" sample in the code. Consequently, `al->maps` remains NULL
when `maps__machine(al->maps)` is called from `db_export__sample`.

As al->maps can be NULL in case of Hypervisor samples , use thread->maps
because even for Hypervisor sample, machine should exist.
If we don't have machine for some reason, return -1 to avoid segmentation fault.

Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Link: https://lore.kernel.org/r/20250429065132.36839-1-adityab1@linux.ibm.com
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Without the change `perf `hangs up on charaster devices. On my system
it's enough to run system-wide sampler for a few seconds to get the
hangup:

    $ perf record -a -g --call-graph=dwarf
    $ perf report
    # hung

`strace` shows that hangup happens on reading on a character device
`/dev/dri/renderD128`

    $ strace -y -f -p 2780484
    strace: Process 2780484 attached
    pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached

It's call trace descends into `elfutils`:

    $ gdb -p 2780484
    (gdb) bt
    #0  0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0)
        at ../sysdeps/unix/sysv/linux/pread64.c:25
    #1  0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1
    #2  0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #3  0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #4  0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 ()
       from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #5  0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0)
        at util/dso.h:537
    #6  0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114
    #7  frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242
    #8  0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #9  0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
    #12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0,
        thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127,
        best_effort=best_effort@entry=false) at util/thread.h:152
    #13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0,
        sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939
    #14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540,
        max_stack=127, symbols=true) at util/machine.c:2920
    #15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440,
        sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true)
        at util/machine.c:2970
    #16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440,
        sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198
    #17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0,
        evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127
    #18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127,
        arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255
    #19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540,
        evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334
    #20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0,
        file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367
    #21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245
    #22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324
    #23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224,
        file_path=0x105ffbf0 "perf.data") at util/session.c:1419
    #24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0,
    --Type <RET> for more, q to quit, c to continue without paging--
    quit
        prog=prog@entry=0x7fff9df81220) at util/session.c:2132
    #25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220)
        at util/session.c:2181
    #26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226
    #27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390
    #28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076
    #29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827
    #30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0)
        at perf.c:351
    #31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404
    #32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448
    #33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556

The hangup happens because nothing in` perf` or `elfutils` checks if a
mapped file is easily readable.

The change conservatively skips all non-regular files.

Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Symbolize stack traces by creating a live machine. Add this
functionality to dump_stack and switch dump_stack users to use
it. Switch TUI to use it. Add stack traces to the child test function
which can be useful to diagnose blocked code.

Example output:
```
$ perf test -vv PERF_RECORD_
...
  7: PERF_RECORD_* events & perf_sample fields:
  7: PERF_RECORD_* events & perf_sample fields                       : Running (1 active)
^C
Signal (2) while running tests.
Terminating tests with the same signal
Internal test harness failure. Completing any started tests:
:  7: PERF_RECORD_* events & perf_sample fields:

---- unexpected signal (2) ----
    #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0
    #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
    #2 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64
    #3 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72
    #4 0x7fc12fef1393 in __nanosleep nanosleep.c:26
    #5 0x7fc12ff02d68 in __sleep sleep.c:55
    #6 0x55788c63196b in test__PERF_RECORD perf-record.c:0
    #7 0x55788c620fb0 in run_test_child builtin-test.c:0
    #8 0x55788c5bd18d in start_command run-command.c:127
    #9 0x55788c621ef3 in __cmd_test builtin-test.c:0
    #10 0x55788c6225bf in cmd_test ??:0
    #11 0x55788c5afbd0 in run_builtin perf.c:0
    #12 0x55788c5afeeb in handle_internal_command perf.c:0
    #13 0x55788c52b383 in main ??:0
    #14 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74
    #15 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
    #16 0x55788c52b9d1 in _start ??:0

---- unexpected signal (2) ----
    #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0
    #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
    #2 0x7fc12fea3a14 in pthread_sigmask@GLIBC_2.2.5 pthread_sigmask.c:45
    #3 0x7fc12fe49fd9 in __GI___sigprocmask sigprocmask.c:26
    #4 0x7fc12ff2601b in __longjmp_chk longjmp.c:36
    #5 0x55788c6210c0 in print_test_result.isra.0 builtin-test.c:0
    #6 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
    #7 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64
    #8 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72
    #9 0x7fc12fef1393 in __nanosleep nanosleep.c:26
    #10 0x7fc12ff02d68 in __sleep sleep.c:55
    #11 0x55788c63196b in test__PERF_RECORD perf-record.c:0
    #12 0x55788c620fb0 in run_test_child builtin-test.c:0
    #13 0x55788c5bd18d in start_command run-command.c:127
    #14 0x55788c621ef3 in __cmd_test builtin-test.c:0
    #15 0x55788c6225bf in cmd_test ??:0
    #16 0x55788c5afbd0 in run_builtin perf.c:0
    #17 0x55788c5afeeb in handle_internal_command perf.c:0
    #18 0x55788c52b383 in main ??:0
    #19 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74
    #20 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
    #21 0x55788c52b9d1 in _start ??:0
  7: PERF_RECORD_* events & perf_sample fields                       : Skip (permissions)
```

Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250624210500.2121303-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Calling perf top with branch filters enabled on Intel CPU's
with branch counters logging (A.K.A LBR event logging [1]) support
results in a segfault.

$ perf top  -e '{cpu_core/cpu-cycles/,cpu_core/event=0xc6,umask=0x3,frontend=0x11,name=frontend_retired_dsb_miss/}' -j any,counter
...
Thread 27 "perf" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffafff76c0 (LWP 949003)]
perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653
653			*width = env->cpu_pmu_caps ? env->br_cntr_width :
(gdb) bt
 #0  perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653
 #1  0x00000000005b1599 in symbol__account_br_cntr (branch=0x7fffcc3db580, evsel=0xfea2d0, offset=12, br_cntr=8) at util/annotate.c:345
 #2  0x00000000005b17fb in symbol__account_cycles (addr=5658172, start=5658160, sym=0x7fffcc0ee420, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:389
 #3  0x00000000005b1976 in addr_map_symbol__account_cycles (ams=0x7fffcd7b01d0, start=0x7fffcd7b02b0, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:422
 #4  0x000000000068d57f in hist__account_cycles (bs=0x110d288, al=0x7fffafff6540, sample=0x7fffafff6760, nonany_branch_mode=false, total_cycles=0x0, evsel=0xfea2d0) at util/hist.c:2850
 #5  0x0000000000446216 in hist_iter__top_callback (iter=0x7fffafff6590, al=0x7fffafff6540, single=true, arg=0x7fffffff9e00) at builtin-top.c:737
 #6  0x0000000000689787 in hist_entry_iter__add (iter=0x7fffafff6590, al=0x7fffafff6540, max_stack_depth=127, arg=0x7fffffff9e00) at util/hist.c:1359
 #7  0x0000000000446710 in perf_event__process_sample (tool=0x7fffffff9e00, event=0x110d250, evsel=0xfea2d0, sample=0x7fffafff6760, machine=0x108c968) at builtin-top.c:845
 #8  0x0000000000447735 in deliver_event (qe=0x7fffffffa120, qevent=0x10fc200) at builtin-top.c:1211
 #9  0x000000000064ccae in do_flush (oe=0x7fffffffa120, show_progress=false) at util/ordered-events.c:245
 #10 0x000000000064d005 in __ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP, timestamp=0) at util/ordered-events.c:324
 #11 0x000000000064d0ef in ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP) at util/ordered-events.c:342
 #12 0x00000000004472a9 in process_thread (arg=0x7fffffff9e00) at builtin-top.c:1120
 #13 0x00007ffff6e7dba8 in start_thread (arg=<optimized out>) at pthread_create.c:448
 #14 0x00007ffff6f01b8c in __GI___clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:78

The cause is that perf_env__find_br_cntr_info tries to access a
null pointer pmu_caps in the perf_env struct. A similar issue exists
for homogeneous core systems which use the cpu_pmu_caps structure.

Fix this by populating cpu_pmu_caps and pmu_caps structures with
values from sysfs when calling perf top with branch stack sampling
enabled.

[1], LBR event logging introduced here:
https://lore.kernel.org/all/20231025201626.3000228-5-kan.liang@linux.intel.com/

Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250612163659.1357950-2-thomas.falcon@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Add JIT support for the load_acquire and store_release instructions. The
implementation is similar to the kernel where:

        load_acquire  => plain load -> lwsync
        store_release => lwsync -> plain store

To test the correctness of the implementation, following selftests were
run:

  [fedora@linux-kernel bpf]$ sudo ./test_progs -a \
  verifier_load_acquire,verifier_store_release,atomics
  #11/1    atomics/add:OK
  #11/2    atomics/sub:OK
  #11/3    atomics/and:OK
  #11/4    atomics/or:OK
  #11/5    atomics/xor:OK
  #11/6    atomics/cmpxchg:OK
  #11/7    atomics/xchg:OK
  #11      atomics:OK
  #519/1   verifier_load_acquire/load-acquire, 8-bit:OK
  #519/2   verifier_load_acquire/load-acquire, 8-bit @unpriv:OK
  #519/3   verifier_load_acquire/load-acquire, 16-bit:OK
  #519/4   verifier_load_acquire/load-acquire, 16-bit @unpriv:OK
  #519/5   verifier_load_acquire/load-acquire, 32-bit:OK
  #519/6   verifier_load_acquire/load-acquire, 32-bit @unpriv:OK
  #519/7   verifier_load_acquire/load-acquire, 64-bit:OK
  #519/8   verifier_load_acquire/load-acquire, 64-bit @unpriv:OK
  #519/9   verifier_load_acquire/load-acquire with uninitialized
  src_reg:OK
  #519/10  verifier_load_acquire/load-acquire with uninitialized src_reg
  @unpriv:OK
  #519/11  verifier_load_acquire/load-acquire with non-pointer src_reg:OK
  #519/12  verifier_load_acquire/load-acquire with non-pointer src_reg
  @unpriv:OK
  #519/13  verifier_load_acquire/misaligned load-acquire:OK
  #519/14  verifier_load_acquire/misaligned load-acquire @unpriv:OK
  #519/15  verifier_load_acquire/load-acquire from ctx pointer:OK
  #519/16  verifier_load_acquire/load-acquire from ctx pointer @unpriv:OK
  #519/17  verifier_load_acquire/load-acquire with invalid register R15:OK
  #519/18  verifier_load_acquire/load-acquire with invalid register R15
  @unpriv:OK
  #519/19  verifier_load_acquire/load-acquire from pkt pointer:OK
  #519/20  verifier_load_acquire/load-acquire from flow_keys pointer:OK
  #519/21  verifier_load_acquire/load-acquire from sock pointer:OK
  #519     verifier_load_acquire:OK
  #556/1   verifier_store_release/store-release, 8-bit:OK
  #556/2   verifier_store_release/store-release, 8-bit @unpriv:OK
  #556/3   verifier_store_release/store-release, 16-bit:OK
  #556/4   verifier_store_release/store-release, 16-bit @unpriv:OK
  #556/5   verifier_store_release/store-release, 32-bit:OK
  #556/6   verifier_store_release/store-release, 32-bit @unpriv:OK
  #556/7   verifier_store_release/store-release, 64-bit:OK
  #556/8   verifier_store_release/store-release, 64-bit @unpriv:OK
  #556/9   verifier_store_release/store-release with uninitialized
  src_reg:OK
  #556/10  verifier_store_release/store-release with uninitialized src_reg
  @unpriv:OK
  #556/11  verifier_store_release/store-release with uninitialized
  dst_reg:OK
  #556/12  verifier_store_release/store-release with uninitialized dst_reg
  @unpriv:OK
  #556/13  verifier_store_release/store-release with non-pointer
  dst_reg:OK
  #556/14  verifier_store_release/store-release with non-pointer dst_reg
  @unpriv:OK
  #556/15  verifier_store_release/misaligned store-release:OK
  #556/16  verifier_store_release/misaligned store-release @unpriv:OK
  #556/17  verifier_store_release/store-release to ctx pointer:OK
  #556/18  verifier_store_release/store-release to ctx pointer @unpriv:OK
  #556/19  verifier_store_release/store-release, leak pointer to stack:OK
  #556/20  verifier_store_release/store-release, leak pointer to stack
  @unpriv:OK
  #556/21  verifier_store_release/store-release, leak pointer to map:OK
  #556/22  verifier_store_release/store-release, leak pointer to map
  @unpriv:OK
  #556/23  verifier_store_release/store-release with invalid register
  R15:OK
  #556/24  verifier_store_release/store-release with invalid register R15
  @unpriv:OK
  #556/25  verifier_store_release/store-release to pkt pointer:OK
  #556/26  verifier_store_release/store-release to flow_keys pointer:OK
  #556/27  verifier_store_release/store-release to sock pointer:OK
  #556     verifier_store_release:OK
  Summary: 3/55 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250717202935.29018-2-puranjay@kernel.org