Bambu Studio Version

2.0.1.50

Where is the application from?

Bambu Lab Official website

OS version

macOS 15.4

Additional system information

No response

Printer

BambuLab P1S

How to reproduce

After setting the material to PETG in Bambu Studio and slicing the model, the print job is sent to the printer with the correct PETG material setting. However, when the printer starts, it uses a nozzle temperature of 220°C and a bed temperature of 55°C, which are the default settings for generic PLA instead of the appropriate settings for PETG.

Steps to Reproduce:

• Open Bambu Studio.
• Set the material to PETG.
• Slice the model.
• Send the print job to the printer, which is also set to use PETG.
• Start the print job.
• Observe the nozzle and bed temperatures during printing.

Actual results

The printer uses PLA settings (220°C for the nozzle and 55°C for the bed) instead of the correct PETG settings.

Expected results

The printer should use the correct temperature settings for PETG which is 250°C for the nozzle and 70°C for the bed.

Project file & Debug log uploads

debug_Thu_Apr_10_16_48_06_1044.log.0.zip

Checklist of files to include

• Log file
• Project file