Update README #2

ghost · 2020-12-15T11:09:34Z

No description provided.

jelly · 2020-12-15T11:18:41Z

This is a mirror which follows upstream and does not accept pull requests.

Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ torvalds#819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ torvalds#819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ASD and TA share the same firmware in SIENNA_CICHLID and only TA firmware is requested during boot, so only need release TA firmware when remove device. [ 83.877150] general protection fault, probably for non-canonical address 0x1269f97e6ed04095: 0000 [#1] SMP PTI [ 83.888076] CPU: 0 PID: 1312 Comm: modprobe Tainted: G W OE 5.9.0-rc5-deli-amd-vangogh-0.0.6.6-114-gdd99d5669a96-dirty #2 [ 83.901160] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018 [ 83.912353] RIP: 0010:free_fw_priv+0xc/0x120 [ 83.917531] Code: e8 99 cd b0 ff b8 a1 ff ff ff eb 9f 4c 89 f7 e8 8a cd b0 ff b8 f4 ff ff ff eb 90 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <4c> 8b 67 18 48 89 fb 4c 89 e7 e8 45 94 41 00 b8 ff ff ff ff f0 0f [ 83.937576] RSP: 0018:ffffbc34c13a3ce0 EFLAGS: 00010206 [ 83.943699] RAX: ffffffffbb681850 RBX: ffffa047f117eb60 RCX: 0000000080800055 [ 83.951879] RDX: ffffbc34c1d5f000 RSI: 0000000080800055 RDI: 1269f97e6ed04095 [ 83.959955] RBP: ffffbc34c13a3cf0 R08: 0000000000000000 R09: 0000000000000001 [ 83.968107] R10: ffffbc34c13a3cc8 R11: 00000000ffffff00 R12: ffffa047d6b23378 [ 83.976166] R13: ffffa047d6b23338 R14: ffffa047d6b240c8 R15: 0000000000000000 [ 83.984295] FS: 00007f74f6712540(0000) GS:ffffa047fbe00000(0000) knlGS:0000000000000000 [ 83.993323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.000056] CR2: 0000556a1cca4e18 CR3: 000000021faa8004 CR4: 00000000003706f0 [ 84.008128] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 84.016155] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 84.024174] Call Trace: [ 84.027514] release_firmware.part.11+0x4b/0x70 [ 84.033017] release_firmware+0x13/0x20 [ 84.037803] psp_sw_fini+0x77/0xb0 [amdgpu] [ 84.042857] amdgpu_device_fini+0x38c/0x5d0 [amdgpu] [ 84.048815] amdgpu_driver_unload_kms+0x43/0x70 [amdgpu] [ 84.055055] drm_dev_unregister+0x73/0xb0 [drm] [ 84.060499] drm_dev_unplug+0x28/0x30 [drm] [ 84.065598] amdgpu_dev_uninit+0x1b/0x40 [amdgpu] [ 84.071223] amdgpu_pci_remove+0x4e/0x70 [amdgpu] [ 84.076835] pci_device_remove+0x3e/0xc0 [ 84.081609] device_release_driver_internal+0xfb/0x1c0 [ 84.087558] driver_detach+0x4d/0xa0 [ 84.092041] bus_remove_driver+0x5f/0xe0 [ 84.096854] driver_unregister+0x2f/0x50 [ 84.101594] pci_unregister_driver+0x22/0xa0 [ 84.106806] amdgpu_exit+0x15/0x2b [amdgpu] Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Ido Schimmel says: ==================== nexthop: Various fixes This series contains various fixes for the nexthop code. The bugs were uncovered during the development of resilient nexthop groups. Patches #1-#2 fix the error path of nexthop_create_group(). I was not able to trigger these bugs with current code, but it is possible with the upcoming resilient nexthop groups code which adds a user controllable memory allocation further in the function. Patch #3 fixes wrong validation of netlink attributes. Patch #4 fixes wrong invocation of mausezahn in a selftest. ==================== Link: https://lore.kernel.org/r/20210107144824.1135691-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] #8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] #9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

The buffer list can have zero skb as following path: tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so we need to check the list before casting an &sk_buff. Fault report: [] tipc: Bulk publication failure [] general protection fault, probably for non-canonical [#1] PREEMPT [...] [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...] [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018 [] FS: 0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0 Fixes: af9b028 ("tipc: make media xmit call outside node spinlock context") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20210108071337.3598-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== mlxsw: core: Thermal control fixes This series includes two fixes for thermal control in mlxsw. Patch #1 validates that the alarm temperature threshold read from a transceiver is above the warning temperature threshold. If not, the current thresholds are maintained. It was observed that some transceiver might be unreliable and sometimes report a too low alarm temperature threshold which would result in thermal shutdown of the system. Patch #2 increases the temperature threshold above which thermal shutdown is triggered for the ASIC thermal zone. It is currently too low and might result in thermal shutdown under perfectly fine operational conditions. ==================== Link: https://lore.kernel.org/r/20210108145210.1229820-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

While testing the error paths of relocation I hit the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc6+ torvalds#217 Not tainted ------------------------------------------------------ mount/779 is trying to acquire lock: ffffa0e676945418 (&fs_info->balance_mutex){+.+.}-{3:3}, at: btrfs_recover_balance+0x2f0/0x340 but task is already holding lock: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-root-00){++++}-{3:3}: down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x27/0x100 btrfs_read_lock_root_node+0x31/0x40 btrfs_search_slot+0x462/0x8f0 btrfs_update_root+0x55/0x2b0 btrfs_drop_snapshot+0x398/0x750 clean_dirty_subvols+0xdf/0x120 btrfs_recover_relocation+0x534/0x5a0 btrfs_start_pre_rw_mount+0xcb/0x170 open_ctree+0x151f/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (sb_internal#2){.+.+}-{0:0}: start_transaction+0x444/0x700 insert_balance_item.isra.0+0x37/0x320 btrfs_balance+0x354/0xf40 btrfs_ioctl_balance+0x2cf/0x380 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->balance_mutex){+.+.}-{3:3}: __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 __mutex_lock+0x7e/0x7b0 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &fs_info->balance_mutex --> sb_internal#2 --> btrfs-root-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-root-00); lock(sb_internal#2); lock(btrfs-root-00); lock(&fs_info->balance_mutex); *** DEADLOCK *** 2 locks held by mount/779: #0: ffffa0e60dc040e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380 #1: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 stack backtrace: CPU: 0 PID: 779 Comm: mount Not tainted 5.10.0-rc6+ torvalds#217 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 ? trace_call_bpf+0x139/0x260 __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 ? btrfs_recover_balance+0x2f0/0x340 __mutex_lock+0x7e/0x7b0 ? btrfs_recover_balance+0x2f0/0x340 ? btrfs_recover_balance+0x2f0/0x340 ? rcu_read_lock_sched_held+0x3f/0x80 ? kmem_cache_alloc_trace+0x2c4/0x2f0 ? btrfs_get_64+0x5e/0x100 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea ? rcu_read_lock_sched_held+0x3f/0x80 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? __kmalloc_track_caller+0x2f2/0x320 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 ? capable+0x3a/0x60 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is straightforward to fix, simply release the path before we setup the balance_ctl. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

In Linux, if a driver does disable_irq() and later does enable_irq() on its interrupt, I believe it's expecting these properties: * If an interrupt was pending when the driver disabled then it will still be pending after the driver re-enables. * If an edge-triggered interrupt comes in while an interrupt is disabled it should assert when the interrupt is re-enabled. If you think that the above sounds a lot like the disable_irq() and enable_irq() are supposed to be masking/unmasking the interrupt instead of disabling/enabling it then you've made an astute observation. Specifically when talking about interrupts, "mask" usually means to stop posting interrupts but keep tracking them and "disable" means to fully shut off interrupt detection. It's unfortunate that this is so confusing, but presumably this is all the way it is for historical reasons. Perhaps more confusing than the above is that, even though clients of IRQs themselves don't have a way to request mask/unmask vs. disable/enable calls, IRQ chips themselves can implement both. ...and yet more confusing is that if an IRQ chip implements disable/enable then they will be called when a client driver calls disable_irq() / enable_irq(). It does feel like some of the above could be cleared up. However, without any other core interrupt changes it should be clear that when an IRQ chip gets a request to "disable" an IRQ that it has to treat it like a mask of that IRQ. In any case, after that long interlude you can see that the "unmask and clear" can break things. Maulik tried to fix it so that we no longer did "unmask and clear" in commit 71266d9 ("pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback"), but it only handled the PDC case and it had problems (it caused sc7180-trogdor devices to fail to suspend). Let's fix. >From my understanding the source of the phantom interrupt in the were these two things: 1. One that could have been introduced in msm_gpio_irq_set_type() (only for the non-PDC case). 2. Edges could have been detected when a GPIO was muxed away. Fixing case #1 is easy. We can just add a clear in msm_gpio_irq_set_type(). Fixing case #2 is harder. Let's use a concrete example. In sc7180-trogdor.dtsi we configure the uart3 to have two pinctrl states, sleep and default, and mux between the two during runtime PM and system suspend (see geni_se_resources_{on,off}() for more details). The difference between the sleep and default state is that the RX pin is muxed to a GPIO during sleep and muxed to the UART otherwise. As per Qualcomm, when we mux the pin over to the UART function the PDC (or the non-PDC interrupt detection logic) is still watching it / latching edges. These edges don't cause interrupts because the current code masks the interrupt unless we're entering suspend. However, as soon as we enter suspend we unmask the interrupt and it's counted as a wakeup. Let's deal with the problem like this: * When we mux away, we'll mask our interrupt. This isn't necessary in the above case since the client already masked us, but it's a good idea in general. * When we mux back will clear any interrupts and unmask. Fixes: 4b7618f ("pinctrl: qcom: Add irq_enable callback for msm gpio") Fixes: 71266d9 ("pinctrl: qcom: Move clearing pending IRQ to .irq_request_resources callback") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210114191601.v7.4.I7cf3019783720feb57b958c95c2b684940264cd1@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #2 - Don't allow tagged pointers to point to memslots - Filter out ARMv8.1+ PMU events on v8.0 hardware - Hide PMU registers from userspace when no PMU is configured - More PMU cleanups - Don't try to handle broken PSCI firmware - More sys_reg() to reg_to_encoding() conversions

Ido Schimmel says: ==================== mlxsw: Various fixes Patch #1 fixes wrong invocation of mausezahn in a couple of selftests. The tests started failing after Fedora updated their libnet package from version 1.1.6 to 1.2.1. With the fix the tests pass regardless of libnet version. Patch #2 fixes an issue in the mirroring to CPU code that results in policer configuration being overwritten. ==================== Link: https://lore.kernel.org/r/20210128144820.3280295-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to commit 165ae7a ("igb: Report speed and duplex as unknown when device is runtime suspended"), if we try to read speed and duplex sysfs while the device is runtime suspended, igc will complain and stops working: [ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached [ 123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 123.450056] #PF: supervisor read access in kernel mode [ 123.450058] #PF: error_code(0x0000) - not-present page [ 123.450059] PGD 0 P4D 0 [ 123.450064] Oops: 0000 [#1] SMP NOPTI [ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu [ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc] [ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4 [ 123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202 [ 123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000 [ 123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10 [ 123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000 [ 123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008 [ 123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290 [ 123.450094] FS: 00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000 [ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0 [ 123.450100] PKRU: 55555554 [ 123.450101] Call Trace: [ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc] [ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0 [ 123.450123] duplex_show+0x74/0xc0 [ 123.450129] dev_attr_show+0x1d/0x40 [ 123.450134] sysfs_kf_seq_show+0xa1/0x100 [ 123.450137] kernfs_seq_show+0x27/0x30 [ 123.450142] seq_read+0xb7/0x400 [ 123.450148] ? common_file_perm+0x72/0x170 [ 123.450151] kernfs_fop_read+0x35/0x1b0 [ 123.450155] vfs_read+0xb5/0x1b0 [ 123.450157] ksys_read+0x67/0xe0 [ 123.450160] __x64_sys_read+0x1a/0x20 [ 123.450164] do_syscall_64+0x38/0x90 [ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 123.450170] RIP: 0033:0x7f3b351fe142 [ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142 [ 123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003 [ 123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320 [ 123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0 [ 123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140 [ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel mei_me dell_wmi [ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake [ 123.450335] CR2: 0000000000000008 [ 123.450338] ---[ end trace 9f731e38b53c35cc ]--- The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks, and calls runtime resume and runtime suspend routine respectively. However, igc is like igb, runtime resume routine uses rtnl_lock() which upper ethtool layer also uses. So to prevent a deadlock on rtnl, take a different approach, use pm_runtime_suspended() to avoid reading register while device is runtime suspended. Fixes: 8c5ad0d ("igc: Add ethtool support") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Patch series "Fix the compatibility of zsmalloc and zswap". Patch #1 adds a flag to zpool, then zswap used to determine if zpool drivers such as zbud/z3fold/zsmalloc will enter an atomic context after mapping. The difference between zbud/z3fold and zsmalloc is that zsmalloc requires an atomic context that since its map function holds a preempt-disabled, but zbud/z3fold don't require an atomic context. So patch #2 sets flag sleep_mapped to true indicating that zbud/z3fold can sleep after mapping. zsmalloc didn't support sleep after mapping, so don't set that flag to true. This patch (of 2): Add a flag to zpool, named is "can_sleep_mapped", and have it set true for zbud/z3fold, not set this flag for zsmalloc, so its default value is false. Then zswap could go the current path if the flag is true; and if it's false, copy data from src to a temporary buffer, then unmap the handle, take the mutex, process the buffer instead of src to avoid sleeping function called from atomic context. [natechancellor@gmail.com: add return value in zswap_frontswap_load] Link: https://lkml.kernel.org/r/20210121214804.926843-1-natechancellor@gmail.com [tiantao6@hisilicon.com: fix potential memory leak] Link: https://lkml.kernel.org/r/1611538365-51811-1-git-send-email-tiantao6@hisilicon.com [colin.king@canonical.com: fix potential uninitialized pointer read on tmp] Link: https://lkml.kernel.org/r/20210128141728.639030-1-colin.king@canonical.com [tiantao6@hisilicon.com: fix variable 'entry' is uninitialized when used] Link: https://lkml.kernel.org/r/1611223030-58346-1-git-send-email-tiantao6@hisilicon.comLink: https://lkml.kernel.org/r/1611035683-12732-1-git-send-email-tiantao6@hisilicon.com Link: https://lkml.kernel.org/r/1611035683-12732-2-git-send-email-tiantao6@hisilicon.com Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reported-by: Mike Galbraith <efault@gmx.de> Cc: Barry Song <song.bao.hua@hisilicon.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 torvalds#10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED torvalds#11 touch_atime at ffffffffa4cf0000 torvalds#12 generic_file_read_iter at ffffffffa4c1f123 torvalds#13 new_sync_read at ffffffffa4ccdc8a torvalds#14 vfs_read at ffffffffa4cd0849 torvalds#15 ksys_read at ffffffffa4cd0bd1 torvalds#16 do_syscall_64 at ffffffffa4a052eb torvalds#17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f torvalds#10 __extent_writepage at ffffffffc03a4c01 torvalds#11 extent_write_cache_pages at ffffffffc03a500b torvalds#12 extent_writepages at ffffffffc03a6de2 torvalds#13 do_writepages at ffffffffa4c277eb torvalds#14 __filemap_fdatawrite_range at ffffffffa4c1e5bb torvalds#15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes torvalds#16 normal_work_helper at ffffffffc03b706c torvalds#17 process_one_work at ffffffffa4aba4e4 torvalds#18 worker_thread at ffffffffa4aba6fd torvalds#19 kthread at ffffffffa4ac0a3d torvalds#20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

…t context Running "perf mem record" in powerpc platforms with selinux enabled resulted in soft lockup's. Below call-trace was seen in the logs: CPU: 58 PID: 3751 Comm: sssd_nss Not tainted 5.11.0-rc7+ #2 NIP: c000000000dff3d4 LR: c000000000dff3d0 CTR: 0000000000000000 REGS: c000007fffab7d60 TRAP: 0100 Not tainted (5.11.0-rc7+) ... NIP _raw_spin_lock_irqsave+0x94/0x120 LR _raw_spin_lock_irqsave+0x90/0x120 Call Trace: 0xc00000000fd47260 (unreliable) skb_queue_tail+0x3c/0x90 audit_log_end+0x6c/0x180 common_lsm_audit+0xb0/0xe0 slow_avc_audit+0xa4/0x110 avc_has_perm+0x1c4/0x260 selinux_perf_event_open+0x74/0xd0 security_perf_event_open+0x68/0xc0 record_and_restart+0x6e8/0x7f0 perf_event_interrupt+0x22c/0x560 performance_monitor_exception0x4c/0x60 performance_monitor_common_virt+0x1c8/0x1d0 interrupt: f00 at _raw_spin_lock_irqsave+0x38/0x120 NIP: c000000000dff378 LR: c000000000b5fbbc CTR: c0000000007d47f0 REGS: c00000000fd47860 TRAP: 0f00 Not tainted (5.11.0-rc7+) ... NIP _raw_spin_lock_irqsave+0x38/0x120 LR skb_queue_tail+0x3c/0x90 interrupt: f00 0x38 (unreliable) 0xc00000000aae6200 audit_log_end+0x6c/0x180 audit_log_exit+0x344/0xf80 __audit_syscall_exit+0x2c0/0x320 do_syscall_trace_leave+0x148/0x200 syscall_exit_prepare+0x324/0x390 system_call_common+0xfc/0x27c The above trace shows that while the CPU was handling a performance monitor exception, there was a call to security_perf_event_open() function. In powerpc core-book3s, this function is called from perf_allow_kernel() check during recording of data address in the sample via perf_get_data_addr(). Commit da97e18 ("perf_event: Add support for LSM and SELinux checks") introduced security enhancements to perf. As part of this commit, the new security hook for perf_event_open() was added in all places where perf paranoid check was previously used. In powerpc core-book3s code, originally had paranoid checks in perf_get_data_addr() and power_pmu_bhrb_read(). So perf_paranoid_kernel() checks were replaced with perf_allow_kernel() in these PMU helper functions as well. The intention of paranoid checks in core-book3s was to verify privilege access before capturing some of the sample data. Along with paranoid checks, perf_allow_kernel() also does a security_perf_event_open(). Since these functions are accessed while recording a sample, we end up calling selinux_perf_event_open() in PMI context. Some of the security functions use spinlock like sidtab_sid2str_put(). If a perf interrupt hits under a spin lock and if we end up in calling selinux hook functions in PMI handler, this could cause a dead lock. Since the purpose of this security hook is to control access to perf_event_open(), it is not right to call this in interrupt context. The paranoid checks in powerpc core-book3s were done at interrupt time which is also not correct. Reference commits: Commit cd1231d ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()") Commit bb19af8 ("powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer") We only allow creation of events that have already passed the privilege checks in perf_event_open(). So these paranoid checks are not needed at event time. As a fix, patch uses 'event->attr.exclude_kernel' check to prevent exposing kernel address for userspace only sampling. Fixes: cd1231d ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()") Cc: stable@vger.kernel.org # v4.17+ Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1614247839-1428-1-git-send-email-atrajeev@linux.vnet.ibm.com

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. # perf test -v 4 4: Read samples using the mmap interface : --- start --- test child forked, pid 139782 mmap size 528384B ================================================================= ==139782==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55 #6 0x564ba1e278fb in run_test tests/builtin-test.c:428 #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458 #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679 #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825 torvalds#10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 torvalds#11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Read samples using the mmap interface: FAILED! failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 24 24: Number of exit events of a simple workload : --- start --- test child forked, pid 145915 mmap size 528384B ================================================================= ==145915==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63 #3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74 #4 0x561cf4d798fb in run_test tests/builtin-test.c:428 #5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458 #6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679 #7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825 #8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Number of exit events of a simple workload: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist has the maps with its own refcounts so we don't need to set the pointers to NULL. Otherwise following error was reported by Asan. Also change the goto label since it doesn't need to have two. # perf test -v 25 25: Software clock events period values : --- start --- test child forked, pid 149154 mmap size 528384B mmap size 528384B ================================================================= ==149154==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63 #3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65 #4 0x56260d26d8fb in run_test tests/builtin-test.c:428 #5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458 #6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679 #7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825 #8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308 ... test child finished with 1 ---- end ---- Software clock events period values : FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 torvalds#10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 torvalds#11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 torvalds#12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 torvalds#13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 torvalds#14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 torvalds#15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 torvalds#16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 torvalds#17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. $ perf test -v 28 28: Use a dummy software event to keep tracking: --- start --- test child forked, pid 156810 mmap size 528384B ================================================================= ==156810==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84 #6 0x55cc625e38fb in run_test tests/builtin-test.c:428 #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458 #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679 #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825 torvalds#10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 torvalds#11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Use a dummy software event to keep tracking: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The evlist and cpu/thread maps should be released together. Otherwise the following error was reported by Asan. $ perf test -v 35 35: Track with sched_switch : --- start --- test child forked, pid 159287 Using CPUID GenuineIntel-6-8E-C mmap size 528384B 1295 events recorded ================================================================= ==159287==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350 #6 0x5652f56e18fb in run_test tests/builtin-test.c:428 #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458 #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679 #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825 torvalds#10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 torvalds#11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Track with sched_switch: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It missed to call perf_thread_map__put() after using the map. $ perf test -v 43 43: Synthesize thread map : --- start --- test child forked, pid 162640 ================================================================= ==162640==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164 #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23 #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46 #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97 #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428 #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458 #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679 #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825 #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Synthesize thread map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should be released after printing the map. $ perf test -v 52 52: Print cpu map : --- start --- test child forked, pid 172233 ================================================================= ==172233==ERROR: LeakSanitizer: detected memory leaks Direct leak of 156 byte(s) in 1 object(s) allocated from: #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237 #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102 #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120 #5 0x55e63afff8fb in run_test tests/builtin-test.c:428 #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458 #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679 #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825 #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 torvalds#10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s). test child finished with 1 ---- end ---- Print cpu map: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It should release the maps at the end. $ perf test -v 71 71: Convert perf time to TSC : --- start --- test child forked, pid 178744 mmap size 528384B 1st event perf time 59207256505278 tsc 13187166645142 rdtsc time 59207256542151 tsc 13187166723020 2nd event perf time 59207256543749 tsc 13187166726393 ================================================================= ==178744==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79 #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149 #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166 #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181 #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73 #6 0x55b6209828fb in run_test tests/builtin-test.c:428 #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458 #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679 #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825 torvalds#10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 torvalds#11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Convert perf time to TSC: FAILED! Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

I got a segfault when using -r option with event groups. The option makes it run the workload multiple times and it will reuse the evlist and evsel for each run. While most of resources are allocated and freed properly, the id hash in the evlist was not and it resulted in the bug. You can see it with the address sanitizer like below: $ perf stat -r 100 -e '{cycles,instructions}' true ================================================================= ==693052==ERROR: AddressSanitizer: heap-use-after-free on address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8 WRITE of size 8 at 0x6080000003d0 thread T0 #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644 #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237 #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244 #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285 #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765 #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782 #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895 #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014 #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446 #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 torvalds#10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 torvalds#11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 torvalds#12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539 torvalds#13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308 torvalds#14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9) Actually the nodes in the hash table are struct perf_stream_id and they were freed in the previous run. Fix it by resetting the hash. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains various fixes for mlxsw. Patch #1 fixes a race condition in a selftest. The race and fix are explained in detail in the changelog. Patch #2 re-adds a link mode that was wrongly removed, resulting in a regression in some setups. Patch #3 fixes a race condition in route installation with nexthop objects. Please consider patches #2 and #3 for stable. ==================== Link: https://lore.kernel.org/r/20210225165721.1322424-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Michael Chan says: ==================== bnxt_en: Error recovery bug fixes. Two error recovery related bug fixes for 2 corner cases. Please queue patch #2 for -stable. Thanks. ==================== Link: https://lore.kernel.org/r/1614332590-17865-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

label err_eni_release is reachable when eni_start() fail. In eni_start() it calls dev->phy->start() in the last step, if start() fail we don't need to call phy->stop(), if start() is never called, we neither need to call phy->stop(), otherwise null-ptr-deref will happen. In order to fix this issue, don't call phy->stop() in label err_eni_release [ 4.875714] ================================================================== [ 4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni] [ 4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95 [ 4.876778] [ 4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2 [ 4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94 [ 4.877876] Call Trace: [ 4.878009] dump_stack+0x7d/0xa3 [ 4.878191] kasan_report.cold+0x10c/0x10e [ 4.878410] ? __slab_free+0x2f0/0x340 [ 4.878612] ? suni_stop+0x47/0x100 [suni] [ 4.878832] suni_stop+0x47/0x100 [suni] [ 4.879043] eni_do_release+0x3b/0x70 [eni] [ 4.879269] eni_init_one.cold+0x1152/0x1747 [eni] [ 4.879528] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 4.879768] ? eni_ioctl+0x270/0x270 [eni] [ 4.879990] ? __mutex_lock_slowpath+0x10/0x10 [ 4.880226] ? eni_ioctl+0x270/0x270 [eni] [ 4.880448] local_pci_probe+0x6f/0xb0 [ 4.880650] pci_device_probe+0x171/0x240 [ 4.880864] ? pci_device_remove+0xe0/0xe0 [ 4.881086] ? kernfs_create_link+0xb6/0x110 [ 4.881315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0 [ 4.881594] really_probe+0x161/0x420 [ 4.881791] driver_probe_device+0x6d/0xd0 [ 4.882010] device_driver_attach+0x82/0x90 [ 4.882233] ? device_driver_attach+0x90/0x90 [ 4.882465] __driver_attach+0x60/0x100 [ 4.882671] ? device_driver_attach+0x90/0x90 [ 4.882903] bus_for_each_dev+0xe1/0x140 [ 4.883114] ? subsys_dev_iter_exit+0x10/0x10 [ 4.883346] ? klist_node_init+0x61/0x80 [ 4.883557] bus_add_driver+0x254/0x2a0 [ 4.883764] driver_register+0xd3/0x150 [ 4.883971] ? 0xffffffffc0038000 [ 4.884149] do_one_initcall+0x84/0x250 [ 4.884355] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 4.884674] ? unpoison_range+0xf/0x30 [ 4.884875] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.885150] ? unpoison_range+0xf/0x30 [ 4.885352] ? unpoison_range+0xf/0x30 [ 4.885557] do_init_module+0xf8/0x350 [ 4.885760] load_module+0x3fe6/0x4340 [ 4.885960] ? vm_unmap_ram+0x1d0/0x1d0 [ 4.886166] ? ____kasan_kmalloc.constprop.0+0x84/0xa0 [ 4.886441] ? module_frob_arch_sections+0x20/0x20 [ 4.886697] ? __do_sys_finit_module+0x108/0x170 [ 4.886941] __do_sys_finit_module+0x108/0x170 [ 4.887178] ? __ia32_sys_init_module+0x40/0x40 [ 4.887419] ? file_open_root+0x200/0x200 [ 4.887634] ? do_sys_open+0x85/0xe0 [ 4.887826] ? filp_open+0x50/0x50 [ 4.888009] ? fpregs_assert_state_consistent+0x4d/0x60 [ 4.888287] ? exit_to_user_mode_prepare+0x2f/0x130 [ 4.888547] do_syscall_64+0x33/0x40 [ 4.888739] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 4.889010] RIP: 0033:0x7ff62fcf1cf7 [ 4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71 [ 4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7 [ 4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003 [ 4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001 [ 4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0 [ 4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001 [ 4.892439] ================================================================== Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

pert script tests fails with segmentation fault as below: 92: perf script tests: --- start --- test child forked, pid 103769 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB /tmp/perf-test-script.7rbftEpOzX/perf.data (9 samples) ] /usr/libexec/perf-core/tests/shell/script.sh: line 35: 103780 Segmentation fault (core dumped) perf script -i "${perfdatafile}" -s "${db_test}" --- Cleaning up --- ---- end(-1) ---- 92: perf script tests : FAILED! Backtrace pointed to : #0 0x0000000010247dd0 in maps.machine () #1 0x00000000101d178c in db_export.sample () #2 0x00000000103412c8 in python_process_event () #3 0x000000001004eb28 in process_sample_event () #4 0x000000001024fcd0 in machines.deliver_event () #5 0x000000001025005c in perf_session.deliver_event () #6 0x00000000102568b0 in __ordered_events__flush.part.0 () #7 0x0000000010251618 in perf_session.process_events () #8 0x0000000010053620 in cmd_script () #9 0x00000000100b5a28 in run_builtin () torvalds#10 0x00000000100b5f94 in handle_internal_command () torvalds#11 0x0000000010011114 in main () Further investigation reveals that this occurs in the `perf script tests`, because it uses `db_test.py` script. This script sets `perf_db_export_mode = True`. With `perf_db_export_mode` enabled, if a sample originates from a hypervisor, perf doesn't set maps for "[H]" sample in the code. Consequently, `al->maps` remains NULL when `maps__machine(al->maps)` is called from `db_export__sample`. As al->maps can be NULL in case of Hypervisor samples , use thread->maps because even for Hypervisor sample, machine should exist. If we don't have machine for some reason, return -1 to avoid segmentation fault. Reported-by: Disha Goel <disgoel@linux.ibm.com> Signed-off-by: Aditya Bodkhe <aditya.b1@linux.ibm.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Link: https://lore.kernel.org/r/20250429065132.36839-1-adityab1@linux.ibm.com Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Without the change `perf `hangs up on charaster devices. On my system it's enough to run system-wide sampler for a few seconds to get the hangup: $ perf record -a -g --call-graph=dwarf $ perf report # hung `strace` shows that hangup happens on reading on a character device `/dev/dri/renderD128` $ strace -y -f -p 2780484 strace: Process 2780484 attached pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached It's call trace descends into `elfutils`: $ gdb -p 2780484 (gdb) bt #0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0) at ../sysdeps/unix/sysv/linux/pread64.c:25 #1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1 #2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0) at util/dso.h:537 #6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114 #7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242 #8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 #9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 torvalds#10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 torvalds#11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1 torvalds#12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0, thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127, best_effort=best_effort@entry=false) at util/thread.h:152 torvalds#13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939 torvalds#14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2920 torvalds#15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440, sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true) at util/machine.c:2970 torvalds#16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440, sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198 torvalds#17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0, evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127 torvalds#18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127, arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255 torvalds#19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540, evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334 torvalds#20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0, file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367 torvalds#21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245 torvalds#22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324 torvalds#23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224, file_path=0x105ffbf0 "perf.data") at util/session.c:1419 torvalds#24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0, --Type <RET> for more, q to quit, c to continue without paging-- quit prog=prog@entry=0x7fff9df81220) at util/session.c:2132 torvalds#25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220) at util/session.c:2181 torvalds#26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226 torvalds#27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390 torvalds#28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076 torvalds#29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827 torvalds#30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:351 torvalds#31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404 torvalds#32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448 torvalds#33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556 The hangup happens because nothing in` perf` or `elfutils` checks if a mapped file is easily readable. The change conservatively skips all non-regular files. Signed-off-by: Sergei Trofimovich <slyich@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Symbolize stack traces by creating a live machine. Add this functionality to dump_stack and switch dump_stack users to use it. Switch TUI to use it. Add stack traces to the child test function which can be useful to diagnose blocked code. Example output: ``` $ perf test -vv PERF_RECORD_ ... 7: PERF_RECORD_* events & perf_sample fields: 7: PERF_RECORD_* events & perf_sample fields : Running (1 active) ^C Signal (2) while running tests. Terminating tests with the same signal Internal test harness failure. Completing any started tests: : 7: PERF_RECORD_* events & perf_sample fields: ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #2 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 #3 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 #4 0x7fc12fef1393 in __nanosleep nanosleep.c:26 #5 0x7fc12ff02d68 in __sleep sleep.c:55 #6 0x55788c63196b in test__PERF_RECORD perf-record.c:0 #7 0x55788c620fb0 in run_test_child builtin-test.c:0 #8 0x55788c5bd18d in start_command run-command.c:127 #9 0x55788c621ef3 in __cmd_test builtin-test.c:0 torvalds#10 0x55788c6225bf in cmd_test ??:0 torvalds#11 0x55788c5afbd0 in run_builtin perf.c:0 torvalds#12 0x55788c5afeeb in handle_internal_command perf.c:0 torvalds#13 0x55788c52b383 in main ??:0 torvalds#14 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 torvalds#15 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 torvalds#16 0x55788c52b9d1 in _start ??:0 ---- unexpected signal (2) ---- #0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0 #1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #2 0x7fc12fea3a14 in pthread_sigmask@GLIBC_2.2.5 pthread_sigmask.c:45 #3 0x7fc12fe49fd9 in __GI___sigprocmask sigprocmask.c:26 #4 0x7fc12ff2601b in __longjmp_chk longjmp.c:36 #5 0x55788c6210c0 in print_test_result.isra.0 builtin-test.c:0 #6 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0 #7 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64 #8 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72 #9 0x7fc12fef1393 in __nanosleep nanosleep.c:26 torvalds#10 0x7fc12ff02d68 in __sleep sleep.c:55 torvalds#11 0x55788c63196b in test__PERF_RECORD perf-record.c:0 torvalds#12 0x55788c620fb0 in run_test_child builtin-test.c:0 torvalds#13 0x55788c5bd18d in start_command run-command.c:127 torvalds#14 0x55788c621ef3 in __cmd_test builtin-test.c:0 torvalds#15 0x55788c6225bf in cmd_test ??:0 torvalds#16 0x55788c5afbd0 in run_builtin perf.c:0 torvalds#17 0x55788c5afeeb in handle_internal_command perf.c:0 torvalds#18 0x55788c52b383 in main ??:0 torvalds#19 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74 torvalds#20 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128 torvalds#21 0x55788c52b9d1 in _start ??:0 7: PERF_RECORD_* events & perf_sample fields : Skip (permissions) ``` Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250624210500.2121303-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Calling perf top with branch filters enabled on Intel CPU's with branch counters logging (A.K.A LBR event logging [1]) support results in a segfault. $ perf top -e '{cpu_core/cpu-cycles/,cpu_core/event=0xc6,umask=0x3,frontend=0x11,name=frontend_retired_dsb_miss/}' -j any,counter ... Thread 27 "perf" received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fffafff76c0 (LWP 949003)] perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 653 *width = env->cpu_pmu_caps ? env->br_cntr_width : (gdb) bt #0 perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653 #1 0x00000000005b1599 in symbol__account_br_cntr (branch=0x7fffcc3db580, evsel=0xfea2d0, offset=12, br_cntr=8) at util/annotate.c:345 #2 0x00000000005b17fb in symbol__account_cycles (addr=5658172, start=5658160, sym=0x7fffcc0ee420, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:389 #3 0x00000000005b1976 in addr_map_symbol__account_cycles (ams=0x7fffcd7b01d0, start=0x7fffcd7b02b0, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:422 #4 0x000000000068d57f in hist__account_cycles (bs=0x110d288, al=0x7fffafff6540, sample=0x7fffafff6760, nonany_branch_mode=false, total_cycles=0x0, evsel=0xfea2d0) at util/hist.c:2850 #5 0x0000000000446216 in hist_iter__top_callback (iter=0x7fffafff6590, al=0x7fffafff6540, single=true, arg=0x7fffffff9e00) at builtin-top.c:737 #6 0x0000000000689787 in hist_entry_iter__add (iter=0x7fffafff6590, al=0x7fffafff6540, max_stack_depth=127, arg=0x7fffffff9e00) at util/hist.c:1359 #7 0x0000000000446710 in perf_event__process_sample (tool=0x7fffffff9e00, event=0x110d250, evsel=0xfea2d0, sample=0x7fffafff6760, machine=0x108c968) at builtin-top.c:845 #8 0x0000000000447735 in deliver_event (qe=0x7fffffffa120, qevent=0x10fc200) at builtin-top.c:1211 #9 0x000000000064ccae in do_flush (oe=0x7fffffffa120, show_progress=false) at util/ordered-events.c:245 torvalds#10 0x000000000064d005 in __ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP, timestamp=0) at util/ordered-events.c:324 torvalds#11 0x000000000064d0ef in ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP) at util/ordered-events.c:342 torvalds#12 0x00000000004472a9 in process_thread (arg=0x7fffffff9e00) at builtin-top.c:1120 torvalds#13 0x00007ffff6e7dba8 in start_thread (arg=<optimized out>) at pthread_create.c:448 torvalds#14 0x00007ffff6f01b8c in __GI___clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:78 The cause is that perf_env__find_br_cntr_info tries to access a null pointer pmu_caps in the perf_env struct. A similar issue exists for homogeneous core systems which use the cpu_pmu_caps structure. Fix this by populating cpu_pmu_caps and pmu_caps structures with values from sysfs when calling perf top with branch stack sampling enabled. [1], LBR event logging introduced here: https://lore.kernel.org/all/20231025201626.3000228-5-kan.liang@linux.intel.com/ Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Thomas Falcon <thomas.falcon@intel.com> Link: https://lore.kernel.org/r/20250612163659.1357950-2-thomas.falcon@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Some architectures (e.g. arm64) only support memory hotplug operations on a restricted set of physical addresses. This applies even when we are faking some CXL fixed memory windows for the purposes of cxl_test. That range can be queried with mhp_get_pluggable_range(true). Use the minimum of that the top of that range and iomem_resource.end to establish the 64GiB region used by cxl_test. From thread #2 which was related to the issue in #1. [ dj: Add CONFIG_MEMORY_HOTPLUG config check, from Alison ] Link: https://lore.kernel.org/linux-cxl/20250522145622.00002633@huawei.com/ #2 Reported-by: Itaru Kitayama <itaru.kitayama@linux.dev> Closes: pmem/ndctl#278 #1 Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com <mailto:itaru.kitayama@fujitsu.com> Tested-by: Marc Herbert <marc.herbert@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250527153451.82858-1-Jonathan.Cameron@huawei.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>

When the root of a nested PCIe bridge configuration is unplugged, the pnv_php driver leaked the allocated IRQ resources for the child bridges' hotplug event notifications, resulting in a panic. Fix this by walking all child buses and deallocating all its IRQ resources before calling pci_hp_remove_devices(). Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so that it is only destroyed in pnv_php_free_slot(), instead of pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will now be called by workers triggered by hot unplug interrupts, so the workqueue needs to stay allocated. The abridged kernel panic that occurs without this patch is as follows: WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2 Call Trace: msi_device_data_release+0x34/0x9c (unreliable) release_nodes+0x64/0x13c devres_release_all+0xc0/0x140 device_del+0x2d4/0x46c pci_destroy_dev+0x5c/0x194 pci_hp_remove_devices+0x90/0x128 pci_hp_remove_devices+0x44/0x128 pnv_php_disable_slot+0x54/0xd4 power_write_file+0xf8/0x18c pci_slot_attr_store+0x40/0x5c sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x3bc/0x50c ksys_write+0x84/0x140 system_call_exception+0x124/0x230 system_call_vectored_common+0x15c/0x2ec Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com> Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> [bhelgaas: tidy comments] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com

With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] Reported-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>

[ Upstream commit 8b428f4 ] nbd grabs device lock nbd->config_lock for updating nr_hw_queues, this ways cause the following lock dependency: -> #2 (&disk->open_mutex){+.+.}-{4:4}: lock_acquire kernel/locking/lockdep.c:5871 [inline] lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828 __mutex_lock_common kernel/locking/mutex.c:602 [inline] __mutex_lock+0x166/0x1292 kernel/locking/mutex.c:747 mutex_lock_nested+0x14/0x1c kernel/locking/mutex.c:799 __del_gendisk+0x132/0xac6 block/genhd.c:706 del_gendisk+0xf6/0x19a block/genhd.c:819 nbd_dev_remove+0x3c/0xf2 drivers/block/nbd.c:268 nbd_dev_remove_work+0x1c/0x26 drivers/block/nbd.c:284 process_one_work+0x96a/0x1f32 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3321 [inline] worker_thread+0x5ce/0xde8 kernel/workqueue.c:3402 kthread+0x39c/0x7d4 kernel/kthread.c:464 ret_from_fork_kernel+0x2a/0xbb2 arch/riscv/kernel/process.c:214 ret_from_fork_kernel_asm+0x16/0x18 arch/riscv/kernel/entry.S:327 -> #1 (&set->update_nr_hwq_lock){++++}-{4:4}: lock_acquire kernel/locking/lockdep.c:5871 [inline] lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828 down_write+0x9c/0x19a kernel/locking/rwsem.c:1577 blk_mq_update_nr_hw_queues+0x3e/0xb86 block/blk-mq.c:5041 nbd_start_device+0x140/0xb2c drivers/block/nbd.c:1476 nbd_genl_connect+0xae0/0x1b24 drivers/block/nbd.c:2201 genl_family_rcv_msg_doit+0x206/0x2e6 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x514/0x78e net/netlink/genetlink.c:1210 netlink_rcv_skb+0x206/0x3be net/netlink/af_netlink.c:2534 genl_rcv+0x36/0x4c net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x4f0/0x82c net/netlink/af_netlink.c:1339 netlink_sendmsg+0x85e/0xdd6 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0xcc/0x160 net/socket.c:727 ____sys_sendmsg+0x63e/0x79c net/socket.c:2566 ___sys_sendmsg+0x144/0x1e6 net/socket.c:2620 __sys_sendmsg+0x188/0x246 net/socket.c:2652 __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __riscv_sys_sendmsg+0x70/0xa2 net/socket.c:2655 syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112 do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341 handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197 -> #0 (&nbd->config_lock){+.+.}-{4:4}: check_noncircular+0x132/0x146 kernel/locking/lockdep.c:2178 check_prev_add kernel/locking/lockdep.c:3168 [inline] check_prevs_add kernel/locking/lockdep.c:3287 [inline] validate_chain kernel/locking/lockdep.c:3911 [inline] __lock_acquire+0x12b2/0x24ea kernel/locking/lockdep.c:5240 lock_acquire kernel/locking/lockdep.c:5871 [inline] lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828 __mutex_lock_common kernel/locking/mutex.c:602 [inline] __mutex_lock+0x166/0x1292 kernel/locking/mutex.c:747 mutex_lock_nested+0x14/0x1c kernel/locking/mutex.c:799 refcount_dec_and_mutex_lock+0x60/0xd8 lib/refcount.c:118 nbd_config_put+0x3a/0x610 drivers/block/nbd.c:1423 nbd_release+0x94/0x15c drivers/block/nbd.c:1735 blkdev_put_whole+0xac/0xee block/bdev.c:721 bdev_release+0x3fe/0x600 block/bdev.c:1144 blkdev_release+0x1a/0x26 block/fops.c:684 __fput+0x382/0xa8c fs/file_table.c:465 ____fput+0x1c/0x26 fs/file_table.c:493 task_work_run+0x16a/0x25e kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0x118/0x134 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_trap_ecall_u+0x3f0/0x530 arch/riscv/kernel/traps.c:355 handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197 Also it isn't necessary to require nbd->config_lock, because blk_mq_update_nr_hw_queues() does grab tagset lock for sync everything. Fixes the issue by releasing ->config_lock & retry in case of concurrent updating nr_hw_queues. Fixes: 98e68f6 ("block: prevent adding/deleting disk during updating nr_hw_queues") Reported-by: syzbot+2bcecf3c38cb3e8fdc8d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6855034f.a00a0220.137b3.0031.GAE@google.com Reviewed-by: Yu Kuai <yukuai3@huawei.com> Cc: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Link: https://lore.kernel.org/r/20250709111744.2353050-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 36670b6 ] During beacon miss handling, ath12k driver iterates over active virtual interfaces (vifs) and attempts to access the radio object (ar) via arvif->deflink->ar. However, after commit aa80f12 ("wifi: ath12k: defer vdev creation for MLO"), arvif is linked to a radio only after vdev creation, typically when a channel is assigned or a scan is requested. For P2P capable devices, a default P2P interface is created by wpa_supplicant along with regular station interfaces, these serve as dummy interfaces for P2P-capable stations, lack an associated netdev and initiate frequent scans to discover neighbor p2p devices. When a scan is initiated on such P2P vifs, driver selects destination radio (ar) based on scan frequency, creates a scan vdev, and attaches arvif to the radio. Once the scan completes or is aborted, the scan vdev is deleted, detaching arvif from the radio and leaving arvif->ar uninitialized. While handling beacon miss for station interfaces, P2P interface is also encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter() tries to dereference the uninitialized arvif->deflink->ar. Fix this by verifying that vdev is created for the arvif before accessing its ar during beacon miss handling and similar vif iterator callbacks. ========================================================================== wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ #2 PREEMPT(full) RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k] Call Trace: __iterate_interfaces+0x11a/0x410 [mac80211] ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211] ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k] ath12k_roam_event+0x393/0x560 [ath12k] ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k] ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k] ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k] ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k] ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k] ath12k_pci_ce_workqueue+0x69/0x120 [ath12k] process_one_work+0xe3a/0x1430 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: aa80f12 ("wifi: ath12k: defer vdev creation for MLO") Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250618185635.750470-1-rameshkumar.sundaram@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5fb9042 ] The issue was reproduced on NV10 using IGT pci_unplug test. It is expected that `amdgpu_driver_postclose_kms()` is called prior to `amdgpu_drm_release()`. However, the bug is that `amdgpu_fpriv` was freed in `amdgpu_driver_postclose_kms()`, and then later accessed in `amdgpu_drm_release()` via a call to `amdgpu_userq_mgr_fini()`. As a result, KASAN detected a use-after-free condition, as shown in the log below. The proposed fix is to move the calls to `amdgpu_eviction_fence_destroy()` and `amdgpu_userq_mgr_fini()` into `amdgpu_driver_postclose_kms()`, so they are invoked before `amdgpu_fpriv` is freed. This also ensures symmetry with the initialization path in `amdgpu_driver_open_kms()`, where the following components are initialized: - `amdgpu_userq_mgr_init()` - `amdgpu_eviction_fence_init()` - `amdgpu_ctx_mgr_init()` Correspondingly, in `amdgpu_driver_postclose_kms()` we should clean up using: - `amdgpu_userq_mgr_fini()` - `amdgpu_eviction_fence_destroy()` - `amdgpu_ctx_mgr_fini()` This change eliminates the use-after-free and improves consistency in resource management between open and close paths. [ +0.094367] ================================================================== [ +0.000026] BUG: KASAN: slab-use-after-free in amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000866] Write of size 8 at addr ffff88811c068c60 by task amd_pci_unplug/1737 [ +0.000026] CPU: 3 UID: 0 PID: 1737 Comm: amd_pci_unplug Not tainted 6.14.0+ #2 [ +0.000008] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000003] dump_stack_lvl+0x76/0xa0 [ +0.000010] print_report+0xce/0x600 [ +0.000009] ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000790] ? srso_return_thunk+0x5/0x5f [ +0.000007] ? kasan_complete_mode_report_info+0x76/0x200 [ +0.000008] ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000684] kasan_report+0xbe/0x110 [ +0.000007] ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000601] __asan_report_store8_noabort+0x17/0x30 [ +0.000007] amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu] [ +0.000801] ? __pfx_amdgpu_userq_mgr_fini+0x10/0x10 [amdgpu] [ +0.000819] ? srso_return_thunk+0x5/0x5f [ +0.000008] amdgpu_drm_release+0xa3/0xe0 [amdgpu] [ +0.000604] __fput+0x354/0xa90 [ +0.000010] __fput_sync+0x59/0x80 [ +0.000005] __x64_sys_close+0x7d/0xe0 [ +0.000006] x64_sys_call+0x2505/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000004] ? kasan_record_aux_stack+0xae/0xd0 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? kmem_cache_free+0x398/0x580 [ +0.000006] ? __fput+0x543/0xa90 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __fput+0x543/0xa90 [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? irqentry_exit+0x43/0x50 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? exc_page_fault+0x7c/0x110 [ +0.000006] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000005] RIP: 0033:0x7ffff7b14f67 [ +0.000005] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff [ +0.000004] RSP: 002b:00007fffffffe358 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ +0.000006] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67 [ +0.000003] RDX: 0000000000000000 RSI: 00007ffff7f5755a RDI: 0000000000000003 [ +0.000003] RBP: 00007fffffffe380 R08: 0000555555568170 R09: 0000000000000000 [ +0.000003] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8 [ +0.000003] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040 [ +0.000007] </TASK> [ +0.000286] Allocated by task 425 on cpu 11 at 29.751192s: [ +0.000013] kasan_save_stack+0x28/0x60 [ +0.000008] kasan_save_track+0x18/0x70 [ +0.000006] kasan_save_alloc_info+0x38/0x60 [ +0.000006] __kasan_kmalloc+0xc1/0xd0 [ +0.000005] __kmalloc_cache_noprof+0x1bd/0x430 [ +0.000006] amdgpu_driver_open_kms+0x172/0x760 [amdgpu] [ +0.000521] drm_file_alloc+0x569/0x9a0 [ +0.000008] drm_client_init+0x1b7/0x410 [ +0.000007] drm_fbdev_client_setup+0x174/0x470 [ +0.000007] drm_client_setup+0x8a/0xf0 [ +0.000006] amdgpu_pci_probe+0x50b/0x10d0 [amdgpu] [ +0.000482] local_pci_probe+0xe7/0x1b0 [ +0.000008] pci_device_probe+0x5bf/0x890 [ +0.000005] really_probe+0x1fd/0x950 [ +0.000007] __driver_probe_device+0x307/0x410 [ +0.000005] driver_probe_device+0x4e/0x150 [ +0.000006] __driver_attach+0x223/0x510 [ +0.000005] bus_for_each_dev+0x102/0x1a0 [ +0.000006] driver_attach+0x3d/0x60 [ +0.000005] bus_add_driver+0x309/0x650 [ +0.000005] driver_register+0x13d/0x490 [ +0.000006] __pci_register_driver+0x1ee/0x2b0 [ +0.000006] xfrm_ealg_get_byidx+0x43/0x50 [xfrm_algo] [ +0.000008] do_one_initcall+0x9c/0x3e0 [ +0.000007] do_init_module+0x29e/0x7f0 [ +0.000006] load_module+0x5c75/0x7c80 [ +0.000006] init_module_from_file+0x106/0x180 [ +0.000007] idempotent_init_module+0x377/0x740 [ +0.000006] __x64_sys_finit_module+0xd7/0x180 [ +0.000006] x64_sys_call+0x1f0b/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000005] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000013] Freed by task 1737 on cpu 9 at 76.455063s: [ +0.000010] kasan_save_stack+0x28/0x60 [ +0.000006] kasan_save_track+0x18/0x70 [ +0.000005] kasan_save_free_info+0x3b/0x60 [ +0.000006] __kasan_slab_free+0x54/0x80 [ +0.000005] kfree+0x127/0x470 [ +0.000006] amdgpu_driver_postclose_kms+0x455/0x760 [amdgpu] [ +0.000485] drm_file_free.part.0+0x5b1/0xba0 [ +0.000007] drm_file_free+0x13/0x30 [ +0.000006] drm_client_release+0x1c4/0x2b0 [ +0.000006] drm_fbdev_ttm_fb_destroy+0xd2/0x120 [drm_ttm_helper] [ +0.000007] put_fb_info+0x97/0xe0 [ +0.000006] unregister_framebuffer+0x197/0x380 [ +0.000005] drm_fb_helper_unregister_info+0x94/0x100 [ +0.000005] drm_fbdev_client_unregister+0x3c/0x80 [ +0.000007] drm_client_dev_unregister+0x144/0x330 [ +0.000006] drm_dev_unregister+0x49/0x1b0 [ +0.000006] drm_dev_unplug+0x4c/0xd0 [ +0.000006] amdgpu_pci_remove+0x58/0x130 [amdgpu] [ +0.000482] pci_device_remove+0xae/0x1e0 [ +0.000006] device_remove+0xc7/0x180 [ +0.000006] device_release_driver_internal+0x3d4/0x5a0 [ +0.000007] device_release_driver+0x12/0x20 [ +0.000006] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000005] remove_store+0xd7/0xf0 [ +0.000007] dev_attr_store+0x3f/0x80 [ +0.000006] sysfs_kf_write+0x125/0x1d0 [ +0.000005] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000007] vfs_write+0x90d/0xe70 [ +0.000006] ksys_write+0x119/0x220 [ +0.000006] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000005] do_syscall_64+0x7c/0x170 [ +0.000005] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000013] The buggy address belongs to the object at ffff88811c068000 which belongs to the cache kmalloc-rnd-01-4k of size 4096 [ +0.000016] The buggy address is located 3168 bytes inside of freed 4096-byte region [ffff88811c068000, ffff88811c069000) [ +0.000022] The buggy address belongs to the physical page: [ +0.000010] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88811c06e000 pfn:0x11c068 [ +0.000006] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ +0.000006] flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff) [ +0.000007] page_type: f5(slab) [ +0.000007] raw: 0017ffffc0000040 ffff88810004c140 dead000000000122 0000000000000000 [ +0.000005] raw: ffff88811c06e000 0000000080040002 00000000f5000000 0000000000000000 [ +0.000006] head: 0017ffffc0000040 ffff88810004c140 dead000000000122 0000000000000000 [ +0.000005] head: ffff88811c06e000 0000000080040002 00000000f5000000 0000000000000000 [ +0.000006] head: 0017ffffc0000003 ffffea0004701a01 ffffffffffffffff 0000000000000000 [ +0.000005] head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 [ +0.000004] page dumped because: kasan: bad access detected [ +0.000011] Memory state around the buggy address: [ +0.000009] ffff88811c068b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff88811c068b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] >ffff88811c068c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ^ [ +0.000010] ffff88811c068c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ffff88811c068d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ================================================================== Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com> Cc: Jesse Zhang <Jesse.Zhang@amd.com> Cc: Arvind Yadav <arvind.yadav@amd.com> v2: drop amdgpu_drm_release() and assign drm_release() as the callback directly.(Alex) Fixes: adba092 ("drm/amdgpu: Fix Illegal opcode in command stream Error") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a886d26 ] [ +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733 [ +0.000027] CPU: 10 UID: 0 PID: 1733 Comm: amd_pci_unplug Tainted: G W 6.14.0+ #2 [ +0.000009] Tainted: [W]=WARN [ +0.000003] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000003] dump_stack_lvl+0x76/0xa0 [ +0.000011] print_report+0xce/0x600 [ +0.000009] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? kasan_complete_mode_report_info+0x76/0x200 [ +0.000007] ? kasan_addr_to_slab+0xd/0xb0 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000707] kasan_report+0xbe/0x110 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000541] __asan_report_load8_noabort+0x14/0x30 [ +0.000005] amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000535] ? stop_cpsch+0x396/0x600 [amdgpu] [ +0.000556] ? stop_cpsch+0x429/0x600 [amdgpu] [ +0.000536] ? __pfx_amdgpu_userq_suspend+0x10/0x10 [amdgpu] [ +0.000536] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? kgd2kfd_suspend+0x132/0x1d0 [amdgpu] [ +0.000542] amdgpu_device_fini_hw+0x581/0xe90 [amdgpu] [ +0.000485] ? down_write+0xbb/0x140 [ +0.000007] ? __mutex_unlock_slowpath.constprop.0+0x317/0x360 [ +0.000005] ? __pfx_amdgpu_device_fini_hw+0x10/0x10 [amdgpu] [ +0.000482] ? __kasan_check_write+0x14/0x30 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? up_write+0x55/0xb0 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? blocking_notifier_chain_unregister+0x6c/0xc0 [ +0.000008] amdgpu_driver_unload_kms+0x69/0x90 [amdgpu] [ +0.000484] amdgpu_pci_remove+0x93/0x130 [amdgpu] [ +0.000482] pci_device_remove+0xae/0x1e0 [ +0.000008] device_remove+0xc7/0x180 [ +0.000008] device_release_driver_internal+0x3d4/0x5a0 [ +0.000007] device_release_driver+0x12/0x20 [ +0.000004] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000005] remove_store+0xd7/0xf0 [ +0.000005] ? __pfx_remove_store+0x10/0x10 [ +0.000006] ? __pfx__copy_from_iter+0x10/0x10 [ +0.000006] ? __pfx_dev_attr_store+0x10/0x10 [ +0.000006] dev_attr_store+0x3f/0x80 [ +0.000006] sysfs_kf_write+0x125/0x1d0 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __kasan_check_write+0x14/0x30 [ +0.000005] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000005] ? rw_verify_area+0x70/0x420 [ +0.000005] ? __pfx_kernfs_fop_write_iter+0x10/0x10 [ +0.000006] vfs_write+0x90d/0xe70 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pfx_vfs_write+0x10/0x10 [ +0.000004] ? local_clock+0x15/0x30 [ +0.000008] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_slab_free+0x5f/0x80 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fdget_pos+0x1d3/0x500 [ +0.000007] ksys_write+0x119/0x220 [ +0.000005] ? putname+0x1c/0x30 [ +0.000006] ? __pfx_ksys_write+0x10/0x10 [ +0.000007] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __pfx___x64_sys_openat+0x10/0x10 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? irqentry_exit+0x43/0x50 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? exc_page_fault+0x7c/0x110 [ +0.000006] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000006] RIP: 0033:0x7480c0b14887 [ +0.000005] Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ +0.000005] RSP: 002b:00007fff142b0058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ +0.000006] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007480c0b14887 [ +0.000003] RDX: 0000000000000001 RSI: 00007480c0e7365a RDI: 0000000000000004 [ +0.000003] RBP: 00007fff142b0080 R08: 0000563b2e73c170 R09: 0000000000000000 [ +0.000003] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff142b02f8 [ +0.000003] R13: 0000563b159a72a9 R14: 0000563b159a9d48 R15: 00007480c0f19040 [ +0.000008] </TASK> [ +0.000445] Allocated by task 427 on cpu 5 at 29.342331s: [ +0.000011] kasan_save_stack+0x28/0x60 [ +0.000006] kasan_save_track+0x18/0x70 [ +0.000006] kasan_save_alloc_info+0x38/0x60 [ +0.000005] __kasan_kmalloc+0xc1/0xd0 [ +0.000006] __kmalloc_cache_noprof+0x1bd/0x430 [ +0.000007] amdgpu_driver_open_kms+0x172/0x760 [amdgpu] [ +0.000493] drm_file_alloc+0x569/0x9a0 [ +0.000007] drm_client_init+0x1b7/0x410 [ +0.000007] drm_fbdev_client_setup+0x174/0x470 [ +0.000006] drm_client_setup+0x8a/0xf0 [ +0.000006] amdgpu_pci_probe+0x510/0x10c0 [amdgpu] [ +0.000483] local_pci_probe+0xe7/0x1b0 [ +0.000006] pci_device_probe+0x5bf/0x890 [ +0.000006] really_probe+0x1fd/0x950 [ +0.000005] __driver_probe_device+0x307/0x410 [ +0.000006] driver_probe_device+0x4e/0x150 [ +0.000005] __driver_attach+0x223/0x510 [ +0.000006] bus_for_each_dev+0x102/0x1a0 [ +0.000005] driver_attach+0x3d/0x60 [ +0.000006] bus_add_driver+0x309/0x650 [ +0.000005] driver_register+0x13d/0x490 [ +0.000006] __pci_register_driver+0x1ee/0x2b0 [ +0.000006] rfcomm_dlc_clear_state+0x69/0x220 [rfcomm] [ +0.000011] do_one_initcall+0x9c/0x3e0 [ +0.000007] do_init_module+0x29e/0x7f0 [ +0.000006] load_module+0x5c75/0x7c80 [ +0.000006] init_module_from_file+0x106/0x180 [ +0.000006] idempotent_init_module+0x377/0x740 [ +0.000006] __x64_sys_finit_module+0xd7/0x180 [ +0.000006] x64_sys_call+0x1f0b/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000005] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000013] Freed by task 1733 on cpu 5 at 59.907086s: [ +0.000011] kasan_save_stack+0x28/0x60 [ +0.000006] kasan_save_track+0x18/0x70 [ +0.000005] kasan_save_free_info+0x3b/0x60 [ +0.000005] __kasan_slab_free+0x54/0x80 [ +0.000006] kfree+0x127/0x470 [ +0.000006] amdgpu_driver_postclose_kms+0x455/0x760 [amdgpu] [ +0.000493] drm_file_free.part.0+0x5b1/0xba0 [ +0.000006] drm_file_free+0x13/0x30 [ +0.000006] drm_client_release+0x1c4/0x2b0 [ +0.000006] drm_fbdev_ttm_fb_destroy+0xd2/0x120 [drm_ttm_helper] [ +0.000007] put_fb_info+0x97/0xe0 [ +0.000007] unregister_framebuffer+0x197/0x380 [ +0.000005] drm_fb_helper_unregister_info+0x94/0x100 [ +0.000005] drm_fbdev_client_unregister+0x3c/0x80 [ +0.000007] drm_client_dev_unregister+0x144/0x330 [ +0.000006] drm_dev_unregister+0x49/0x1b0 [ +0.000006] drm_dev_unplug+0x4c/0xd0 [ +0.000006] amdgpu_pci_remove+0x58/0x130 [amdgpu] [ +0.000484] pci_device_remove+0xae/0x1e0 [ +0.000008] device_remove+0xc7/0x180 [ +0.000007] device_release_driver_internal+0x3d4/0x5a0 [ +0.000006] device_release_driver+0x12/0x20 [ +0.000007] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000006] remove_store+0xd7/0xf0 [ +0.000006] dev_attr_store+0x3f/0x80 [ +0.000005] sysfs_kf_write+0x125/0x1d0 [ +0.000006] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000006] vfs_write+0x90d/0xe70 [ +0.000006] ksys_write+0x119/0x220 [ +0.000006] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000005] do_syscall_64+0x7c/0x170 [ +0.000006] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000012] The buggy address belongs to the object at ffff88812eec8000 which belongs to the cache kmalloc-rnd-07-4k of size 4096 [ +0.000016] The buggy address is located 3160 bytes inside of freed 4096-byte region [ffff88812eec8000, ffff88812eec9000) [ +0.000023] The buggy address belongs to the physical page: [ +0.000009] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12eec8 [ +0.000007] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ +0.000005] flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff) [ +0.000007] page_type: f5(slab) [ +0.000008] raw: 0017ffffc0000040 ffff888100054500 dead000000000122 0000000000000000 [ +0.000005] raw: 0000000000000000 0000000080040004 00000000f5000000 0000000000000000 [ +0.000006] head: 0017ffffc0000040 ffff888100054500 dead000000000122 0000000000000000 [ +0.000005] head: 0000000000000000 0000000080040004 00000000f5000000 0000000000000000 [ +0.000006] head: 0017ffffc0000003 ffffea0004bbb201 ffffffffffffffff 0000000000000000 [ +0.000005] head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 [ +0.000005] page dumped because: kasan: bad access detected [ +0.000010] Memory state around the buggy address: [ +0.000009] ffff88812eec8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff88812eec8b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] >ffff88812eec8c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ^ [ +0.000010] ffff88812eec8c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ffff88812eec8d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000011] ================================================================== The use-after-free occurs because a delayed work item (`suspend_work`) may still be pending or running when resources it accesses are freed during device removal or file close. The previous code used `flush_work(&fpriv->evf_mgr.suspend_work.work)`, which does not wait for delayed work that has not yet started. As a result, the delayed work could run after its memory was freed, causing a use-after-free. By switching to `flush_delayed_work(&fpriv->evf_mgr.suspend_work)`, we ensure that the kernel waits for both queued and delayed work to finish before freeing memory, closing this race. Fixes: adba092 ("drm/amdgpu: Fix Illegal opcode in command stream Error") Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 17ce3e5 ] syzbot reported that the netfilter bpf prog can be called without migration disabled in xmit path. Then the assertion in __bpf_prog_run() fails, triggering the splat below. [0] Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf(). [0]: BUG: assuming non migratable context at ./include/linux/filter.h:703 in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session 3 locks held by sshd-session/5829: #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline] #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395 #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470 #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline] #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline] #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241 CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 __cant_migrate kernel/sched/core.c:8860 [inline] __cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834 __bpf_prog_run include/linux/filter.h:703 [inline] bpf_prog_run include/linux/filter.h:725 [inline] nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline] nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623 nf_hook+0x370/0x680 include/linux/netfilter.h:272 NF_HOOK_COND include/linux/netfilter.h:305 [inline] ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433 dst_output include/net/dst.h:459 [inline] ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527 __tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479 tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline] tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838 __tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021 tcp_push+0x225/0x700 net/ipv4/tcp.c:759 tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359 tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396 inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] sock_write_iter+0x4aa/0x5b0 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x6c7/0x1150 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe7d365d407 Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff RSP: Fixes: fd9c663 ("bpf: minimal support for programs hooked into netfilter framework") Reported-by: syzbot+40f772d37250b6d10efc@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6879466d.a00a0220.3af5df.0022.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Tested-by: syzbot+40f772d37250b6d10efc@syzkaller.appspotmail.com Acked-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20250722224041.112292-1-kuniyu@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4668619 ] When the root of a nested PCIe bridge configuration is unplugged, the pnv_php driver leaked the allocated IRQ resources for the child bridges' hotplug event notifications, resulting in a panic. Fix this by walking all child buses and deallocating all its IRQ resources before calling pci_hp_remove_devices(). Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so that it is only destroyed in pnv_php_free_slot(), instead of pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will now be called by workers triggered by hot unplug interrupts, so the workqueue needs to stay allocated. The abridged kernel panic that occurs without this patch is as follows: WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2 Call Trace: msi_device_data_release+0x34/0x9c (unreliable) release_nodes+0x64/0x13c devres_release_all+0xc0/0x140 device_del+0x2d4/0x46c pci_destroy_dev+0x5c/0x194 pci_hp_remove_devices+0x90/0x128 pci_hp_remove_devices+0x44/0x128 pnv_php_disable_slot+0x54/0xd4 power_write_file+0xf8/0x18c pci_slot_attr_store+0x40/0x5c sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x3bc/0x50c ksys_write+0x84/0x140 system_call_exception+0x124/0x230 system_call_vectored_common+0x15c/0x2ec Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com> Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> [bhelgaas: tidy comments] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 17ec2f9 upstream. Let the guest set DEBUGCTL.RTM_DEBUG if RTM is supported according to the guest CPUID model, as debug support is supposed to be available if RTM is supported, and there are no known downsides to letting the guest debug RTM aborts. Note, there are no known bug reports related to RTM_DEBUG, the primary motivation is to reduce the probability of breaking existing guests when a future change adds a missing consistency check on vmcs12.GUEST_DEBUGCTL (KVM currently lets L2 run with whatever hardware supports; whoops). Note #2, KVM already emulates DR6.RTM, and doesn't restrict access to DR7.RTM. Fixes: 83c5291 ("KVM: x86: expose Intel cpu new features (HLE, RTM) to guest") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250610232010.162191-5-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7d34ec3 upstream. With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] Reported-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b500 ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") introduced an IRQ lock inversion issue. Fix this lock inversion by changing the spin_lock_irq() calls into spin_lock_irqsave() calls in code that can be called either from interrupt context or from thread context. This patch fixes the following lockdep complaint: WARNING: possible irq lock inversion dependency detected 6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE -------------------------------------------------------- kworker/u28:0/12 just changed the state of lock: ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110 but this lock took another, HARDIRQ-unsafe lock in the past: (shost->host_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(shost->host_lock); local_irq_disable(); lock(&hba->clk_gating.lock); lock(shost->host_lock); <Interrupt> lock(&hba->clk_gating.lock); *** DEADLOCK *** 4 locks held by kworker/u28:0/12: #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104 the shortest dependencies between 2nd lock and 1st lock: -> (shost->host_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 SOFTIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10 ... acquired at: _raw_spin_lock_irqsave+0x5c/0x80 __ufshcd_release+0x78/0x118 ufshcd_send_uic_cmd+0xe4/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 -> (&hba->clk_gating.lock){-...}-{2:2} { IN-HARDIRQ-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_hold+0x34/0x14c ufshcd_send_uic_cmd+0x28/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10 ... acquired at: mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 stack backtrace: CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: async async_run_entry_fn Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_irq_inversion_bug+0x2fc/0x304 mark_lock_irq+0x388/0x4fc mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

…dlock When a user creates a dualpi2 qdisc it automatically sets a timer. This timer will run constantly and update the qdisc's probability field. The issue is that the timer acquires the qdisc root lock and runs in hardirq. The qdisc root lock is also acquired in dev.c whenever a packet arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq, it may interrupt the packet processing running in softirq. If that happens and it runs on the same CPU, it will acquire the same lock and cause a deadlock. The following splat shows up when running a kernel compiled with lock debugging: [ +0.000224] WARNING: inconsistent lock state [ +0.000224] 6.16.0+ torvalds#10 Not tainted [ +0.000169] -------------------------------- [ +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes: [ +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140 [ +0.000000] {IN-HARDIRQ-W} state was registered at: [ +0.000000] lock_acquire.part.0+0xb6/0x220 [ +0.000000] _raw_spin_lock+0x31/0x80 [ +0.000000] dualpi2_timer+0x6f/0x270 [ +0.000000] __hrtimer_run_queues+0x1c5/0x360 [ +0.000000] hrtimer_interrupt+0x115/0x260 [ +0.000000] __sysvec_apic_timer_interrupt+0x6d/0x1a0 [ +0.000000] sysvec_apic_timer_interrupt+0x6e/0x80 [ +0.000000] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ +0.000000] pv_native_safe_halt+0xf/0x20 [ +0.000000] default_idle+0x9/0x10 [ +0.000000] default_idle_call+0x7e/0x1e0 [ +0.000000] do_idle+0x1e8/0x250 [ +0.000000] cpu_startup_entry+0x29/0x30 [ +0.000000] rest_init+0x151/0x160 [ +0.000000] start_kernel+0x6f3/0x700 [ +0.000000] x86_64_start_reservations+0x24/0x30 [ +0.000000] x86_64_start_kernel+0xc8/0xd0 [ +0.000000] common_startup_64+0x13e/0x148 [ +0.000000] irq event stamp: 6884 [ +0.000000] hardirqs last enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270 [ +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270 [ +0.000000] softirqs last enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270 [ +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 [ +0.000000] ---- [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] <Interrupt> [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] *** DEADLOCK *** [ +0.000000] 4 locks held by ping/156: [ +0.000000] #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40 [ +0.000000] #1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190 [ +0.000000] #2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950 [ +0.000000] #3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140 I am able to reproduce it consistently when running the following: tc qdisc add dev lo handle 1: root dualpi2 ping -f 127.0.0.1 To fix it, make the timer run in softirq. Fixes: 320d031 ("sched: Struct definition and parsing of dualpi2 qdisc") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250815135317.664993-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 4611d88 ] The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: <TASK> bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b500 ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eabcac8 ] Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") introduced an IRQ lock inversion issue. Fix this lock inversion by changing the spin_lock_irq() calls into spin_lock_irqsave() calls in code that can be called either from interrupt context or from thread context. This patch fixes the following lockdep complaint: WARNING: possible irq lock inversion dependency detected 6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE -------------------------------------------------------- kworker/u28:0/12 just changed the state of lock: ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110 but this lock took another, HARDIRQ-unsafe lock in the past: (shost->host_lock){+.+.}-{2:2} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(shost->host_lock); local_irq_disable(); lock(&hba->clk_gating.lock); lock(shost->host_lock); <Interrupt> lock(&hba->clk_gating.lock); *** DEADLOCK *** 4 locks held by kworker/u28:0/12: #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104 the shortest dependencies between 2nd lock and 1st lock: -> (shost->host_lock){+.+.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 SOFTIRQ-ON-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock+0x48/0x64 ufshcd_sl_intr+0x4c/0xa08 ufshcd_threaded_intr+0x70/0x12c irq_thread_fn+0x48/0xa8 irq_thread+0x130/0x1ec kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10 ... acquired at: _raw_spin_lock_irqsave+0x5c/0x80 __ufshcd_release+0x78/0x118 ufshcd_send_uic_cmd+0xe4/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 -> (&hba->clk_gating.lock){-...}-{2:2} { IN-HARDIRQ-W at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 INITIAL USE at: lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_hold+0x34/0x14c ufshcd_send_uic_cmd+0x28/0x118 ufshcd_dme_set_attr+0x88/0x1c8 ufs_google_phy_initialization+0x68/0x418 [ufs] ufs_google_link_startup_notify+0x78/0x27c [ufs] ufshcd_link_startup+0x84/0x720 ufshcd_init+0xf3c/0x1330 ufshcd_pltfrm_init+0x728/0x7d8 ufs_google_probe+0x30/0x84 [ufs] platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa4/0x160 driver_probe_device+0x44/0x23c __driver_attach_async_helper+0x60/0xd4 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 } ... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10 ... acquired at: mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 stack backtrace: CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: async async_run_entry_fn Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_irq_inversion_bug+0x2fc/0x304 mark_lock_irq+0x388/0x4fc mark_lock+0x1c4/0x224 __lock_acquire+0x438/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 ufshcd_release_scsi_cmd+0x60/0x110 ufshcd_compl_one_cqe+0x2c0/0x3f4 ufshcd_mcq_poll_cqe_lock+0xb0/0x104 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a] __handle_irq_event_percpu+0x104/0x32c handle_irq_event+0x40/0x9c handle_fasteoi_irq+0x170/0x2e8 generic_handle_domain_irq+0x58/0x80 gic_handle_irq+0x48/0x104 call_on_irq_stack+0x3c/0x50 do_interrupt_handler+0x7c/0xd8 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c _raw_spin_unlock_irqrestore+0x3c/0x6c debug_object_assert_init+0x16c/0x21c __mod_timer+0x4c/0x48c schedule_timeout+0xd4/0x16c io_schedule_timeout+0x48/0x70 do_wait_for_common+0x100/0x194 wait_for_completion_io_timeout+0x48/0x6c blk_execute_rq+0x124/0x17c scsi_execute_cmd+0x18c/0x3f8 scsi_probe_and_add_lun+0x204/0xd74 __scsi_add_device+0xbc/0x120 ufshcd_async_scan+0x80/0x3c0 async_run_entry_fn+0x4c/0x17c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: André Draszik <andre.draszik@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

In gicv5_irs_of_init_affinity() a WARN_ON() is triggered if: 1) a phandle in the "cpus" property does not correspond to a valid OF node 2 a CPU logical id does not exist for a given OF cpu_node #1 is a firmware bug and should be reported as such but does not warrant a WARN_ON() backtrace. #2 is not necessarily an error condition (eg a kernel can be booted with nr_cpus=X limiting the number of cores artificially) and therefore there is no reason to clutter the kernel log with WARN_ON() output when the condition is hit. Rework the IRS affinity parsing code to remove undue WARN_ON()s thus making it less noisy. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250814094138.1611017-1-lpieralisi@kernel.org

With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci") Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq") Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com> Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If preparing a write bio fails then blk_zone_wplug_bio_work() calls bio_endio() with zwplug->lock held. If a device mapper driver is stacked on top of the zoned block device then this results in nested locking of zwplug->lock. The resulting lockdep complaint is a false positive because this is nested locking and not recursive locking. Suppress this false positive by calling blk_zone_wplug_bio_io_error() without holding zwplug->lock. This is safe because no code in blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This patch suppresses the following lockdep complaint: WARNING: possible recursive locking detected -------------------------------------------- kworker/3:0H/46 is trying to acquire lock: ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0 but task is already holding lock: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&zwplug->lock); lock(&zwplug->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/3:0H/46: #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c stack backtrace: CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: sdd_zwplugs blk_zone_wplug_bio_work Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_deadlock_bug+0x38c/0x398 __lock_acquire+0x13e8/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 blk_zone_write_plug_bio_endio+0x64/0x1f0 bio_endio+0x9c/0x240 __dm_io_complete+0x214/0x260 clone_endio+0xe8/0x214 bio_endio+0x218/0x240 blk_zone_wplug_bio_work+0x204/0x48c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: stable@vger.kernel.org Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Fixes: dd291d7 ("block: Introduce zone write plugging") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250825182720.1697203-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>

…ux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 changes for 6.17, take #2 - Correctly handle 'invariant' system registers for protected VMs - Improved handling of VNCR data aborts, including external aborts - Fixes for handling of FEAT_RAS for NV guests, providing a sane fault context during SEA injection and preventing the use of RASv1p1 fault injection hardware - Ensure that page table destruction when a VM is destroyed gives an opportunity to reschedule - Large fix to KVM's infrastructure for managing guest context loaded on the CPU, addressing issues where the output of AT emulation doesn't get reflected to the guest - Fix AT S12 emulation to actually perform stage-2 translation when necessary - Avoid attempting vLPI irqbypass when GICv4 has been explicitly disabled for a VM - Minor KVM + selftest fixes

When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== vxlan: Fix NPDs when using nexthop objects With FDB nexthop groups, VXLAN FDB entries do not necessarily point to a remote destination but rather to an FDB nexthop group. This means that first_remote_{rcu,rtnl}() can return NULL and a few places in the driver were not ready for that, resulting in NULL pointer dereferences. Patches #1-#2 fix these NPDs. Note that vxlan_fdb_find_uc() still dereferences the remote returned by first_remote_rcu() without checking that it is not NULL, but this function is only invoked by a single driver which vetoes the creation of FDB nexthop groups. I will patch this in net-next to make the code less fragile. Patch #3 adds a selftests which exercises these code paths and tests basic Tx functionality with FDB nexthop groups. I verified that the test crashes the kernel without the first two patches. ==================== Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When transmitting a PTP frame which is timestamp using 2 step, the following warning appears if CONFIG_PROVE_LOCKING is enabled: ============================= [ BUG: Invalid wait context ] 6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted ----------------------------- ptp4l/119 is trying to lock: c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac other info that might help us debug this: context-{4:4} 4 locks held by ptp4l/119: #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350 stack backtrace: CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE Hardware name: Generic DT based system Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x7c/0xac dump_stack_lvl from __lock_acquire+0x8e8/0x29dc __lock_acquire from lock_acquire+0x108/0x38c lock_acquire from __mutex_lock+0xb0/0xe78 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568 packet_sendmsg from __sys_sendto+0x110/0x19c __sys_sendto from sys_send+0x18/0x20 sys_send from ret_fast_syscall+0x0/0x1c Exception stack(0xf0b05fa8 to 0xf0b05ff0) 5fa0: 00000001 0000000 0000000 0004b47a 0000003a 00000000 5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000 5fe0: 00000001 bee9d420 00025a10 b6e75c7c So, instead of using the ts_lock for tx_queue, use the spinlock that skb_buff_head has. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 9776651 ] With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] <TASK> [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci") Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq") Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com> Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 198f36f upstream. If preparing a write bio fails then blk_zone_wplug_bio_work() calls bio_endio() with zwplug->lock held. If a device mapper driver is stacked on top of the zoned block device then this results in nested locking of zwplug->lock. The resulting lockdep complaint is a false positive because this is nested locking and not recursive locking. Suppress this false positive by calling blk_zone_wplug_bio_io_error() without holding zwplug->lock. This is safe because no code in blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This patch suppresses the following lockdep complaint: WARNING: possible recursive locking detected -------------------------------------------- kworker/3:0H/46 is trying to acquire lock: ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0 but task is already holding lock: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&zwplug->lock); lock(&zwplug->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/3:0H/46: #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c #1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c #2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c stack backtrace: CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G W OE 6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Spacecraft board based on MALIBU (DT) Workqueue: sdd_zwplugs blk_zone_wplug_bio_work Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xa0 dump_stack+0x18/0x24 print_deadlock_bug+0x38c/0x398 __lock_acquire+0x13e8/0x2e1c lock_acquire+0x134/0x2b4 _raw_spin_lock_irqsave+0x5c/0x80 blk_zone_write_plug_bio_endio+0x64/0x1f0 bio_endio+0x9c/0x240 __dm_io_complete+0x214/0x260 clone_endio+0xe8/0x214 bio_endio+0x218/0x240 blk_zone_wplug_bio_work+0x204/0x48c process_one_work+0x26c/0x65c worker_thread+0x33c/0x498 kthread+0x110/0x134 ret_from_fork+0x10/0x20 Cc: stable@vger.kernel.org Cc: Damien Le Moal <dlemoal@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Fixes: dd291d7 ("block: Introduce zone write plugging") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250825182720.1697203-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Update README

9d20014

jelly closed this Dec 15, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Update README #2

Update README #2

Uh oh!

ghost commented Dec 15, 2020

Uh oh!

jelly commented Dec 15, 2020

Uh oh!

Uh oh!

Update README #2

Update README #2

Uh oh!

Conversation

ghost commented Dec 15, 2020

Uh oh!

jelly commented Dec 15, 2020

Uh oh!

Uh oh!