[Draft] Append BTF ID to type ID in libbpf CO-RE relocation #12
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Second approach to inform driver about metadata. Let user decide if metadata should be supported or not. Add this flag to allow user to inform driver that metadata is used. Set flag is sent to driver via exsisting ndo_bpf call in flag field. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Definition is only a proposal. There should be free place for 8B of tx timestamp. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
As starting point add vlan id and rss hash if xdp metadata is supported. Add xd_metadata_support field in VSI to allow easy passing this value to ring configuration. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Function btf_get_type_id is needed to get correct BTF id to fill metadata by driver. BTF id is obtained while loading XDP program and saved in ring structure to be available in irq. Calling btf_get_type_id with null pointer as module will result in searching for BTF id in vmlinux. Signed-off-by: Ederson de Souza <ederson.desouza@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Example prints out BTF ID returned by a libbpf helper and received in data_meta. It's assumed, pointer to BTF ID is data - sizeof(u32). Possible improvements: - print out RSS and VLAN ID, use CO-RE functions for this (this way user can avoid defining full hints structure) - improve user application (currently it does not ) Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Type needs to be used in the kernel in order to be present in vmlinux BTF. Future Alex's changes to cpumap will ensure this, but for now we just declare a variable of the required type in a random place for testing purposes.
Ensure that xdp program is detached before user program termination. Print out trace_pipe. This allows to run example multiple times without additional commands.
It was tested on an untagged VLAN, so VID seem to be garbage. Hash looks fine, as well as hardcoded values.
Implementation of btf__obj_id() would probably need to change to a separate bpf syscall case, because just before commiting I've noticed that this implementation has problems with vmlinux BTF :(. Furthermore, syscall implementation would be useful when we'll need to access ids data from a userspace program that's not a libbpf loader (for example, when using AF_XDP). Everything aside this function should be OK and can be reviewed. Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
As I mentioned in the previous commit, current approach has problems with vmlinux, but works fine with kernel module BTFs. In this sample I've checked ids of struct ice_ring. You'd probably need to rmmod irdma in order to run the example. Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
alobakin
pushed a commit
that referenced
this pull request
Oct 20, 2021
…inux/kernel/git/saeed/linux Saeed Mahameed says: mlx5-updates-2021-10-18 Maor Maor Gottlieb says: ======================== Use hash to select the affinity port in VF LAG Current VF LAG architecture is based on QP association with a port. QP must be created after LAG is enabled to allow association with non-native port. VM Packets going on slow-path to eSwicth manager (SW path or hairpin) will be transmitted through a different QP than the VM. This means that Different packets of the same flow might egress from different physical ports. This patch-set solves this issue by moving the port selection to be based on the hash function defined by the bond. When the device is moved to VF LAG mode, the driver creates TTC (traffic type classifier) flow tables in order to classify the packet and steer it to the relevant hash function. Similar to what is done in the mlx5 RSS implementation. Each rule in the TTC table, forwards the packet to port selection flow table which has one hash split flow group which contains two "catch all" flow table entries. Each entry point to the relative uplink port. As shown below: ------------------- | FT | TTC rule -> | ----------- | | FG| FTE --|-|-----> uplink of port #1 | | FTE --|-|-----> uplink of port #2 | ----------- | ------------------- Hash split flow group is flow group that created as type of HASH_SPLIT and associated with match definer. The match definer define the fields which included in the hash calculation. The driver creates the match definer according to the xmit hash policy of the bond driver. Patches overview: ======================== Minor E-Switch updates: - Patch #12, dynamic allocation of dest array - Patch #13, increase number of forward destinations to 32 Signed-off-by: David S. Miller <davem@davemloft.net>
alobakin
pushed a commit
that referenced
this pull request
Nov 3, 2021
Attempting to defragment a Btrfs file containing a transparent huge page immediately deadlocks with the following stack trace: #0 context_switch (kernel/sched/core.c:4940:2) #1 __schedule (kernel/sched/core.c:6287:8) #2 schedule (kernel/sched/core.c:6366:3) #3 io_schedule (kernel/sched/core.c:8389:2) #4 wait_on_page_bit_common (mm/filemap.c:1356:4) #5 __lock_page (mm/filemap.c:1648:2) #6 lock_page (./include/linux/pagemap.h:625:3) #7 pagecache_get_page (mm/filemap.c:1910:4) #8 find_or_create_page (./include/linux/pagemap.h:420:9) #9 defrag_prepare_one_page (fs/btrfs/ioctl.c:1068:9) #10 defrag_one_range (fs/btrfs/ioctl.c:1326:14) #11 defrag_one_cluster (fs/btrfs/ioctl.c:1421:9) #12 btrfs_defrag_file (fs/btrfs/ioctl.c:1523:9) #13 btrfs_ioctl_defrag (fs/btrfs/ioctl.c:3117:9) #14 btrfs_ioctl (fs/btrfs/ioctl.c:4872:10) #15 vfs_ioctl (fs/ioctl.c:51:10) #16 __do_sys_ioctl (fs/ioctl.c:874:11) #17 __se_sys_ioctl (fs/ioctl.c:860:1) #18 __x64_sys_ioctl (fs/ioctl.c:860:1) #19 do_syscall_x64 (arch/x86/entry/common.c:50:14) #20 do_syscall_64 (arch/x86/entry/common.c:80:7) #21 entry_SYSCALL_64+0x7c/0x15b (arch/x86/entry/entry_64.S:113) A huge page is represented by a compound page, which consists of a struct page for each PAGE_SIZE page within the huge page. The first struct page is the "head page", and the remaining are "tail pages". Defragmentation attempts to lock each page in the range. However, lock_page() on a tail page actually locks the corresponding head page. So, if defragmentation tries to lock more than one struct page in a compound page, it tries to lock the same head page twice and deadlocks with itself. Ideally, we should be able to defragment transparent huge pages. However, THP for filesystems is currently read-only, so a lot of code is not ready to use huge pages for I/O. For now, let's just return ETXTBUSY. This can be reproduced with the following on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y: $ cat create_thp_file.c #include <fcntl.h> #include <stdbool.h> #include <stdio.h> #include <stdint.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> static const char zeroes[1024 * 1024]; static const size_t FILE_SIZE = 2 * 1024 * 1024; int main(int argc, char **argv) { if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } int fd = creat(argv[1], 0777); if (fd == -1) { perror("creat"); return EXIT_FAILURE; } size_t written = 0; while (written < FILE_SIZE) { ssize_t ret = write(fd, zeroes, sizeof(zeroes) < FILE_SIZE - written ? sizeof(zeroes) : FILE_SIZE - written); if (ret < 0) { perror("write"); return EXIT_FAILURE; } written += ret; } close(fd); fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } /* * Reserve some address space so that we can align the file mapping to * the huge page size. */ void *placeholder_map = mmap(NULL, FILE_SIZE * 2, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (placeholder_map == MAP_FAILED) { perror("mmap (placeholder)"); return EXIT_FAILURE; } void *aligned_address = (void *)(((uintptr_t)placeholder_map + FILE_SIZE - 1) & ~(FILE_SIZE - 1)); void *map = mmap(aligned_address, FILE_SIZE, PROT_READ | PROT_EXEC, MAP_SHARED | MAP_FIXED, fd, 0); if (map == MAP_FAILED) { perror("mmap"); return EXIT_FAILURE; } if (madvise(map, FILE_SIZE, MADV_HUGEPAGE) < 0) { perror("madvise"); return EXIT_FAILURE; } char *line = NULL; size_t line_capacity = 0; FILE *smaps_file = fopen("/proc/self/smaps", "r"); if (!smaps_file) { perror("fopen"); return EXIT_FAILURE; } for (;;) { for (size_t off = 0; off < FILE_SIZE; off += 4096) ((volatile char *)map)[off]; ssize_t ret; bool this_mapping = false; while ((ret = getline(&line, &line_capacity, smaps_file)) > 0) { unsigned long start, end, huge; if (sscanf(line, "%lx-%lx", &start, &end) == 2) { this_mapping = (start <= (uintptr_t)map && (uintptr_t)map < end); } else if (this_mapping && sscanf(line, "FilePmdMapped: %ld", &huge) == 1 && huge > 0) { return EXIT_SUCCESS; } } sleep(6); rewind(smaps_file); fflush(smaps_file); } } $ ./create_thp_file huge $ btrfs fi defrag -czstd ./huge Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
alobakin
pushed a commit
that referenced
this pull request
Nov 3, 2021
This reverts commit bbaf971. The kmaps in compression code are still needed and cause crashes on 32bit machines (ARM, x86). Reproducible eg. by running fstest btrfs/004 with enabled LZO or ZSTD compression. Example stacktrace with ZSTD on a 32bit ARM machine: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c4159ed3 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 210 Comm: kworker/u2:3 Not tainted 5.14.0-rc79+ #12 Hardware name: Allwinner sun4i/sun5i Families Workqueue: btrfs-delalloc btrfs_work_helper PC is at mmiocpy+0x48/0x330 LR is at ZSTD_compressStream_generic+0x15c/0x28c (mmiocpy) from [<c0629648>] (ZSTD_compressStream_generic+0x15c/0x28c) (ZSTD_compressStream_generic) from [<c06297dc>] (ZSTD_compressStream+0x64/0xa0) (ZSTD_compressStream) from [<c049444c>] (zstd_compress_pages+0x170/0x488) (zstd_compress_pages) from [<c0496798>] (btrfs_compress_pages+0x124/0x12c) (btrfs_compress_pages) from [<c043c068>] (compress_file_range+0x3c0/0x834) (compress_file_range) from [<c043c4ec>] (async_cow_start+0x10/0x28) (async_cow_start) from [<c0475c3c>] (btrfs_work_helper+0x100/0x230) (btrfs_work_helper) from [<c014ef68>] (process_one_work+0x1b4/0x418) (process_one_work) from [<c014f210>] (worker_thread+0x44/0x524) (worker_thread) from [<c0156aa4>] (kthread+0x180/0x1b0) (kthread) from [<c0100150>] Link: https://lore.kernel.org/all/CAJCQCtT+OuemovPO7GZk8Y8=qtOObr0XTDp8jh4OHD6y84AFxw@mail.gmail.com/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214839 Signed-off-by: David Sterba <dsterba@suse.com>
alobakin
pushed a commit
that referenced
this pull request
Nov 23, 2021
The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:
Indirect leak of 25133184 byte(s) in 207 object(s) allocated from:
#0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
#2 0x55defe6397e4 in symbol__hists util/annotate.c:952
#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
#9 0x55defe731e38 in machines__deliver_event util/session.c:1510
#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
#12 0x55defe740082 in do_flush util/ordered-events.c:244
#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
#15 0x55defe73837f in __perf_session__process_events util/session.c:2390
#16 0x55defe7385ff in perf_session__process_events util/session.c:2420
...
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
alobakin
pushed a commit
that referenced
this pull request
Nov 30, 2021
We got issue as follows: ================================================================================ UBSAN: Undefined behaviour in ./include/linux/ktime.h:42:14 signed integer overflow: -4966321760114568020 * 1000000000 cannot be represented in type 'long long int' CPU: 1 PID: 2186 Comm: syz-executor.2 Not tainted 4.19.90+ #12 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x170/0x1dc lib/dump_stack.c:118 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161 handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_mul_overflow+0x34/0x44 lib/ubsan.c:213 ktime_set include/linux/ktime.h:42 [inline] timespec64_to_ktime include/linux/ktime.h:78 [inline] io_timeout fs/io_uring.c:5153 [inline] io_issue_sqe+0x42c8/0x4550 fs/io_uring.c:5599 __io_queue_sqe+0x1b0/0xbc0 fs/io_uring.c:5988 io_queue_sqe+0x1ac/0x248 fs/io_uring.c:6067 io_submit_sqe fs/io_uring.c:6137 [inline] io_submit_sqes+0xed8/0x1c88 fs/io_uring.c:6331 __do_sys_io_uring_enter fs/io_uring.c:8170 [inline] __se_sys_io_uring_enter fs/io_uring.c:8129 [inline] __arm64_sys_io_uring_enter+0x490/0x980 fs/io_uring.c:8129 invoke_syscall arch/arm64/kernel/syscall.c:53 [inline] el0_svc_common+0x374/0x570 arch/arm64/kernel/syscall.c:121 el0_svc_handler+0x190/0x260 arch/arm64/kernel/syscall.c:190 el0_svc+0x10/0x218 arch/arm64/kernel/entry.S:1017 ================================================================================ As ktime_set only judge 'secs' if big than KTIME_SEC_MAX, but if we pass negative value maybe lead to overflow. To address this issue, we must check if 'sec' is negative. Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20211118015907.844807-1-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
alobakin
pushed a commit
that referenced
this pull request
Feb 8, 2022
Crashed at i.mx8qm platform when suspend if enable remote wakeup Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 244 Comm: kworker/u12:6 Not tainted 5.15.5-dirty #12 Hardware name: Freescale i.MX8QM MEK (DT) Workqueue: events_unbound async_run_entry_fn pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xhci_disable_hub_port_wake.isra.62+0x60/0xf8 lr : xhci_disable_hub_port_wake.isra.62+0x34/0xf8 sp : ffff80001394bbf0 x29: ffff80001394bbf0 x28: 0000000000000000 x27: ffff00081193b578 x26: ffff00081193b570 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00081193a29c x22: 0000000000020001 x21: 0000000000000001 x20: 0000000000000000 x19: ffff800014e90490 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000960 x9 : ffff80001394baa0 x8 : ffff0008145d1780 x7 : ffff0008f95b8e80 x6 : 000000001853b453 x5 : 0000000000000496 x4 : 0000000000000000 x3 : ffff00081193a29c x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000814591620 Call trace: xhci_disable_hub_port_wake.isra.62+0x60/0xf8 xhci_suspend+0x58/0x510 xhci_plat_suspend+0x50/0x78 platform_pm_suspend+0x2c/0x78 dpm_run_callback.isra.25+0x50/0xe8 __device_suspend+0x108/0x3c0 The basic flow: 1. run time suspend call xhci_suspend, xhci parent devices gate the clock. 2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend 3. xhci_suspend call xhci_disable_hub_port_wake, which access register, but clock already gated by run time suspend. This problem was hidden by power domain driver, which call run time resume before it. But the below commit remove it and make this issue happen. commit c1df456 ("PM: domains: Don't runtime resume devices at genpd_prepare()") This patch call run time resume before suspend to make sure clock is on before access register. Reviewed-by: Peter Chen <peter.chen@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Testeb-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220110172738.31686-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
walking-machine
pushed a commit
that referenced
this pull request
Mar 10, 2022
Ido Schimmel says: ==================== mlxsw: Various updates This patchset contains miscellaneous updates to mlxsw gathered over time. Patches #1-#2 fix recent regressions present in net-next. Patches #3-#11 are small cleanups performed while adding line card support in mlxsw. Patch #12 adds the SFF-8024 Identifier Value of OSFP transceiver in order to be able to dump their EEPROM contents over the ethtool IOCTL interface. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
walking-machine
pushed a commit
that referenced
this pull request
Mar 10, 2022
Ido Schimmel says:
====================
HW counters for soft devices
Petr says:
Offloading switch device drivers may be able to collect statistics of the
traffic taking place in the HW datapath that pertains to a certain soft
netdevice, such as a VLAN. In this patch set, add the necessary
infrastructure to allow exposing these statistics to the offloaded
netdevice in question, and add mlxsw offload.
Across HW platforms, the counter itself very likely constitutes a limited
resource, and the act of counting may have a performance impact. Therefore
this patch set makes the HW statistics collection opt-in and togglable from
userspace on a per-netdevice basis.
Additionally, HW devices may have various limiting conditions under which
they can realize the counter. Therefore it is also possible to query
whether the requested counter is realized by any driver. In TC parlance,
which is to a degree reused in this patch set, two values are recognized:
"request" tracks whether the user enabled collecting HW statistics, and
"used" tracks whether any HW statistics are actually collected.
In the past, this author has expressed the opinion that `a typical user
doing "ip -s l sh", including various scripts, wants to see the full
picture and not worry what's going on where'. While that would be nice,
unfortunately it cannot work:
- Packets that trap from the HW datapath to the SW datapath would be
double counted.
For a given netdevice, some traffic can be purely a SW artifact, and some
may flow through the HW object corresponding to the netdevice. But some
traffic can also get trapped to the SW datapath after bumping the HW
counter. It is not clear how to make sure double-counting does not occur
in the SW datapath in that case, while still making sure that possibly
divergent SW forwarding path gets bumped as appropriate.
So simply adding HW and SW stats may work roughly, most of the time, but
there are scenarios where the result is nonsensical.
- HW devices will have limitations as to what type of traffic they can
count.
In case of mlxsw, which is part of this patch set, there is no reasonable
way to count all traffic going through a certain netdevice, such as a
VLAN netdevice enslaved to a bridge. It is however very simple to count
traffic flowing through an L3 object, such as a VLAN netdevice with an IP
address.
Similarly for physical netdevices, the L3 object at which the counter is
installed is the subport carrying untagged traffic.
These are not "just counters". It is important that the user understands
what is being counted. It would be incorrect to conflate these statistics
with another existing statistics suite.
To that end, this patch set introduces a statistics suite called "L3
stats". This label should make it easy to understand what is being counted,
and to decide whether a given device can or cannot implement this suite for
some type of netdevice. At the same time, the code is written to make
future extensions easy, should a device pop up that can implement a
different flavor of statistics suite (say L2, or an address-family-specific
suite).
For example, using a work-in-progress iproute2[1], to turn on and then list
the counters on a VLAN netdevice:
# ip stats set dev swp1.200 l3_stats on
# ip stats show dev swp1.200 group offload subgroup l3_stats
56: swp1.200: group offload subgroup l3_stats on used on
RX: bytes packets errors dropped missed mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
The patchset progresses as follows:
- Patch #1 is a cleanup.
- In patch #2, remove the assumption that all LINK_OFFLOAD_XSTATS are
dev-backed.
The only attribute defined under the nest is currently
IFLA_OFFLOAD_XSTATS_CPU_HIT. L3_STATS differs from CPU_HIT in that the
driver that supplies the statistics is not the same as the driver that
implements the netdevice. Make the code compatible with this in patch #2.
- In patch #3, add the possibility to filter inside nests.
The filter_mask field of RTM_GETSTATS header determines which
top-level attributes should be included in the netlink response. This
saves processing time by only including the bits that the user cares
about instead of always dumping everything. This is doubly important
for HW-backed statistics that would typically require a trip to the
device to fetch the stats. In this patch, the UAPI is extended to
allow filtering inside IFLA_STATS_LINK_OFFLOAD_XSTATS in particular,
but the scheme is easily extensible to other nests as well.
- In patch #4, propagate extack where we need it.
In patch #5, make it possible to propagate errors from drivers to the
user.
- In patch #6, add the in-kernel APIs for keeping track of the new stats
suite, and the notifiers that the core uses to communicate with the
drivers.
- In patch #7, add UAPI for obtaining the new stats suite.
- In patch #8, add a new UAPI message, RTM_SETSTATS, which will carry
the message to toggle the newly-added stats suite.
In patch #9, add the toggle itself.
At this point the core is ready for drivers to add support for the new
stats suite.
- In patches #10, #11 and #12, apply small tweaks to mlxsw code.
- In patch #13, add support for L3 stats, which are realized as RIF
counters.
- Finally in patch #14, a selftest is added to the net/forwarding
directory. Technically this is a HW-specific test, in that without a HW
implementing the counters, it just will not pass. But devices that
support L3 statistics at all are likely to be able to reuse this
selftest, so it seems appropriate to put it in the general forwarding
directory.
We also have a netdevsim implementation, and a corresponding selftest that
verifies specifically some of the core code. We intend to contribute these
later. Interested parties can take a look at the raw code at [2].
[1] https://github.com/pmachata/iproute2/commits/soft_counters
[2] https://github.com/pmachata/linux_mlxsw/commits/petrm_soft_counters_2
v2:
- Patch #3:
- Do not declare strict_start_type at the new policies, since they are
used with nla_parse_nested() (sans _deprecated).
- Use NLA_POLICY_NESTED to declare what the nest contents should be
- Use NLA_POLICY_MASK instead of BITFIELD32 for the filtering
attribute.
- Patch #6:
- s/monotonous/monotonic/ in commit message
- Use a newly-added struct rtnl_hw_stats64 for stats transfer
- Patch #7:
- Use a newly-added struct rtnl_hw_stats64 for stats transfer
- Patch #8:
- Do not declare strict_start_type at the new policies, since they are
used with nla_parse_nested() (sans _deprecated).
- Patch #13:
- Use a newly-added struct rtnl_hw_stats64 for stats transfer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
alobakin
pushed a commit
that referenced
this pull request
Mar 24, 2022
We are seeing below warnings: kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0 this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work has no chance to run in 5 seconds. By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing ATH11K_FLUSH_TIMEOUT to 50 we get below warnings: kernel: [ 120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds. kernel: [ 120.763169] Not tainted 5.10.90 #12 kernel: [ 120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [ 120.763186] task:wpa_supplicant state:D stack: 0 pid: 924 ppid: 1 flags:0x000043a0 kernel: [ 120.763201] Call Trace: kernel: [ 120.763214] __schedule+0x785/0x12fa kernel: [ 120.763224] ? lockdep_hardirqs_on_prepare+0xe2/0x1bb kernel: [ 120.763242] schedule+0x7e/0xa1 kernel: [ 120.763253] schedule_timeout+0x98/0xfe kernel: [ 120.763266] ? run_local_timers+0x4a/0x4a kernel: [ 120.763291] ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a] kernel: [ 120.763306] ? init_wait_entry+0x2e/0x2e kernel: [ 120.763343] __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763378] __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763411] ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763441] ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763473] __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763540] ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763572] ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763612] ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763654] cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763697] nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763715] genl_rcv_msg+0x392/0x3c2 kernel: [ 120.763750] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763782] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763802] ? genl_rcv+0x36/0x36 kernel: [ 120.763814] netlink_rcv_skb+0x89/0xf7 kernel: [ 120.763829] genl_rcv+0x28/0x36 kernel: [ 120.763840] netlink_unicast+0x179/0x24b kernel: [ 120.763854] netlink_sendmsg+0x393/0x401 kernel: [ 120.763872] sock_sendmsg+0x72/0x76 kernel: [ 120.763886] ____sys_sendmsg+0x170/0x1e6 kernel: [ 120.763897] ? copy_msghdr_from_user+0x7a/0xa2 kernel: [ 120.763914] ___sys_sendmsg+0x95/0xd1 kernel: [ 120.763940] __sys_sendmsg+0x85/0xbf kernel: [ 120.763956] do_syscall_64+0x43/0x55 kernel: [ 120.763966] entry_SYSCALL_64_after_hwframe+0x44/0xa9 kernel: [ 120.763977] RIP: 0033:0x79089f3fcc83 kernel: [ 120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e kernel: [ 120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83 kernel: [ 120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009 kernel: [ 120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000 kernel: [ 120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980 kernel: [ 120.764032] R13: 00007ffe604f0638 R14: 000059b40e98c360 R15: 00007ffe604f0558 ... kernel: [ 120.765230] INFO: task kworker/u32:26:4239 blocked for more than 20 seconds. kernel: [ 120.765238] Not tainted 5.10.90 #12 kernel: [ 120.765245] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [ 120.765253] task:kworker/u32:26 state:D stack: 0 pid: 4239 ppid: 2 flags:0x00004080 kernel: [ 120.765284] Workqueue: phy0 ieee80211_iface_work [mac80211] kernel: [ 120.765295] Call Trace: kernel: [ 120.765306] __schedule+0x785/0x12fa kernel: [ 120.765316] ? find_held_lock+0x3d/0xb2 kernel: [ 120.765331] schedule+0x7e/0xa1 kernel: [ 120.765340] schedule_preempt_disabled+0x15/0x1e kernel: [ 120.765349] __mutex_lock_common+0x561/0xc0d kernel: [ 120.765375] ? ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765390] mutex_lock_nested+0x20/0x26 kernel: [ 120.765416] ieee80211_sta_work+0x3e/0x1232 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765430] ? skb_dequeue+0x54/0x5e kernel: [ 120.765456] ? ieee80211_iface_work+0x7b/0x339 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.765485] process_one_work+0x270/0x504 kernel: [ 120.765501] worker_thread+0x215/0x376 kernel: [ 120.765514] kthread+0x159/0x168 kernel: [ 120.765526] ? pr_cont_work+0x5b/0x5b kernel: [ 120.765536] ? kthread_blkcg+0x31/0x31 kernel: [ 120.765550] ret_from_fork+0x22/0x30 ... kernel: [ 120.765867] Showing all locks held in the system: ... kernel: [ 120.766164] 5 locks held by wpa_supplicant/924: kernel: [ 120.766172] #0: ffffffffb1e63eb0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x36 kernel: [ 120.766197] #1: ffffffffb1e5b1c8 (rtnl_mutex){+.+.}-{3:3}, at: nl80211_pre_doit+0x2a/0x15c [cfg80211] kernel: [ 120.766238] #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: nl80211_deauthenticate+0xde/0x123 [cfg80211] kernel: [ 120.766279] #3: ffff99f09df12a48 (&local->mtx){+.+.}-{3:3}, at: ieee80211_destroy_auth_data+0x9b/0xe6 [mac80211] kernel: [ 120.766321] #4: ffff99f09df12ce0 (&local->chanctx_mtx){+.+.}-{3:3}, at: ieee80211_vif_release_channel+0x5e/0x81 [mac80211] ... kernel: [ 120.766585] 3 locks held by kworker/u32:26/4239: kernel: [ 120.766593] #0: ffff99f04458f948 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x19a/0x504 kernel: [ 120.766621] #1: ffffbad54b3cfe50 ((work_completion)(&sdata->work)){+.+.}-{0:0}, at: process_one_work+0x1c0/0x504 kernel: [ 120.766649] #2: ffff99f08347cd08 (&wdev->mtx){+.+.}-{3:3}, at: ieee80211_sta_work+0x3e/0x1232 [mac80211] With above info the issue is clear: First wmi_mgmt_tx_work is inserted to local->workqueue after sdata->work inserted, then wpa_supplicant acquires wdev->mtx in nl80211_deauthenticate and finally calls ath11k_mac_op_flush where it waits all mgmt. frames to be sent out by wmi_mgmt_tx_work. Meanwhile, sdata->work is blocked by wdev->mtx in ieee80211_sta_work, as a result wmi_mgmt_tx_work has no chance to run. Change to use ab->workqueue instead of local->workqueue to fix this issue. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220217084545.18844-1-quic_bqiang@quicinc.com
alobakin
pushed a commit
that referenced
this pull request
Apr 11, 2022
Ido Schimmel says: ==================== net/sched: Better error reporting for offload failures This patchset improves error reporting to user space when offload fails during the flow action setup phase. That is, when failures occur in the actions themselves, even before calling device drivers. Requested / reported in [1]. This is done by passing extack to the offload_act_setup() callback and making use of it in the various actions. Patches #1-#2 change matchall and flower to log error messages to user space in accordance with the verbose flag. Patch #3 passes extack to the offload_act_setup() callback from the various call sites, including matchall and flower. Patches #4-#11 make use of extack in the various actions to report offload failures. Patch #12 adds an error message when the action does not support offload at all. Patches #13-#14 change matchall and flower to stop overwriting more specific error messages. [1] https://lore.kernel.org/netdev/20220317185249.5mff5u2x624pjewv@skbuf/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
alobakin
pushed a commit
that referenced
this pull request
Apr 28, 2022
…date_bw [Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
alobakin
pushed a commit
that referenced
this pull request
Apr 28, 2022
Below steps end up with crash: - modprobe ice - devlink dev eswitch set $PF1_PCI mode switchdev - echo 64 > /sys/class/net/$PF1/device/sriov_numvfs - rmmod ice Calling ice_eswitch_port_start_xmit while the process of removing VFs is in progress ends up with NULL pointer dereference. That's because PR netdev is not released but some resources are already freed. Fix it by checking if ICE_VF_DIS bit is set. Call trace: [ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 1379.595284] #PF: supervisor read access in kernel mode [ 1379.595410] #PF: error_code(0x0000) - not-present page [ 1379.595535] PGD 0 P4D 0 [ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI [ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G OE 5.17.0-rc8_mrq_dev-queue+ #12 [ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019 [ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice] [ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00 [ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246 [ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000 [ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000 [ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001 [ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000 [ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000 [ 1379.597237] FS: 00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000 [ 1379.597414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0 [ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1379.598015] Call Trace: [ 1379.598153] <TASK> [ 1379.598294] dev_hard_start_xmit+0xd9/0x220 [ 1379.598444] sch_direct_xmit+0x8a/0x340 [ 1379.598592] __dev_queue_xmit+0xa3c/0xd30 [ 1379.598739] ? packet_parse_headers+0xb4/0xf0 [ 1379.598890] packet_sendmsg+0xa15/0x1620 [ 1379.599038] ? __check_object_size+0x46/0x140 [ 1379.599186] sock_sendmsg+0x5e/0x60 [ 1379.599330] ____sys_sendmsg+0x22c/0x270 [ 1379.599474] ? import_iovec+0x17/0x20 [ 1379.599622] ? sendmsg_copy_msghdr+0x59/0x90 [ 1379.599771] ___sys_sendmsg+0x81/0xc0 [ 1379.599917] ? __pollwait+0xd0/0xd0 [ 1379.600061] ? preempt_count_add+0x68/0xa0 [ 1379.600210] ? _raw_write_lock_irq+0x1a/0x40 [ 1379.600369] ? ep_done_scan+0xc9/0x110 [ 1379.600494] ? _raw_spin_unlock_irqrestore+0x25/0x40 [ 1379.600622] ? preempt_count_add+0x68/0xa0 [ 1379.600747] ? _raw_spin_lock_irq+0x1a/0x40 [ 1379.600899] ? __fget_light+0x8f/0x110 [ 1379.601024] __sys_sendmsg+0x49/0x80 [ 1379.601148] ? release_ds_buffers+0x50/0xe0 [ 1379.601274] do_syscall_64+0x3b/0x90 [ 1379.601399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 1379.601525] RIP: 0033:0x7f72c1e2e35d Fixes: f5396b8 ("ice: switchdev slow path") Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reported-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
alobakin
pushed a commit
that referenced
this pull request
Jul 19, 2022
Ido Schimmel says: ==================== mlxsw: Unified bridge conversion - part 6/6 This is the sixth and final part of the conversion of mlxsw to the unified bridge model. It transitions the last bits of functionality that were under firmware's responsibility in the legacy model to the driver. The last patches flip the driver to the unified bridge model and clean up code that was used to make the conversion easier to review. Patchset overview: Patch #1 sets the egress VID for known unicast packets. For multicast packets, the egress VID is configured using the MPE table. See commit 8c2da08 ("mlxsw: spectrum_fid: Configure egress VID classification for multicast"). Patch #2 configures the VNI to FID classification that is used during decapsulation. Patch #3 configures ingress router interface (RIF) in FID classification records, so that when a packet reaches the router block, its ingress RIF is known. Care is taken to configure this in all the different flows (e.g., RIF set on a FID, {Port, VID} joins a FID that already has a RIF etc.). Patch #4 configures the egress VID for routed packets. For such packets, the egress VID is not set by the MPE table or by an FDB record at the egress bridge, but instead by a dedicated table that maps {Egress RIF, Egress port} to a VID. Patch #5 removes VID configuration from RIF creation as in the unified bridge model firmware no longer needs it. Patch #6 sets the egress FID to use in RIF configuration so that the device knows using which FID to bridge the packet after routing. Patches #7-#9 add a new 802.1Q family and associated VLAN RIFs. In the unified bridge model, we no longer need to emulate 802.1Q FIDs using 802.1D FIDs as VNI can be associated with both. Patches #10-#11 finally flip the driver to the unified bridge model. Patches #12-#13 clean up code that was used to make the conversion easier to review. v2: * Fix build failure [1] in patch #1. [1] https://lore.kernel.org/netdev/20220630201709.6e66a1bb@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
alobakin
pushed a commit
that referenced
this pull request
Oct 18, 2022
ASAN reports an use-after-free in btf_dump_name_dups:
ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928
READ of size 2 at 0xffff927006db thread T0
#0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614)
#1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127
#2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143
#3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212
#4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525
#5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552
#6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567
#7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912
#8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798
#9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282
#10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236
#11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#15 0xaaaab5d65990 (test_progs+0x185990)
0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0)
freed by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032
#7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232
#8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#12 0xaaaab5d65990 (test_progs+0x185990)
previously allocated by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070
#7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102
#8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162
#9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#13 0xaaaab5d65990 (test_progs+0x185990)
The reason is that the key stored in hash table name_map is a string
address, and the string memory is allocated by realloc() function, when
the memory is resized by realloc() later, the old memory may be freed,
so the address stored in name_map references to a freed memory, causing
use-after-free.
Fix it by storing duplicated string address in name_map.
Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com
alobakin
pushed a commit
that referenced
this pull request
Nov 14, 2022
In ata_tlink_add(), the return value of transport_add_device() is not checked. As a result, it causes null-ptr-deref while removing the module, because transport_remove_device() is called to remove the device that was not added. Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 CPU: 33 PID: 13850 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #12 pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x48/0x39c lr : device_del+0x44/0x39c Call trace: device_del+0x48/0x39c attribute_container_class_device_del+0x28/0x40 transport_remove_classdev+0x60/0x7c attribute_container_device_trigger+0x118/0x120 transport_remove_device+0x20/0x30 ata_tlink_delete+0x88/0xb0 [libata] ata_tport_delete+0x2c/0x60 [libata] ata_port_detach+0x148/0x1b0 [libata] ata_pci_remove_one+0x50/0x80 [libata] ahci_remove_one+0x4c/0x8c [ahci] Fix this by checking and handling return value of transport_add_device() in ata_tlink_add(). Fixes: d902747 ("[libata] Add ATA transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
alobakin
pushed a commit
that referenced
this pull request
Nov 14, 2022
Petr Machata says: ==================== mlxsw: Add 802.1X and MAB offload support This patchset adds 802.1X [1] and MAB [2] offload support in mlxsw. Patches #1-#3 add the required switchdev interfaces. Patches #4-#5 add the required packet traps for 802.1X. Patches #6-#10 are small preparations in mlxsw. Patch #11 adds locked bridge port support in mlxsw. Patches #12-#15 add mlxsw selftests. The patchset was also tested with the generic forwarding selftest ('bridge_locked_port.sh'). [1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=a21d9a670d81103db7f788de1a4a4a6e4b891a0b [2] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=a35ec8e38cdd1766f29924ca391a01de20163931 ==================== Link: https://lore.kernel.org/r/cover.1667902754.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Jun 14, 2024
We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
alobakin
pushed a commit
that referenced
this pull request
Jun 28, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alobakin
pushed a commit
that referenced
this pull request
Jun 28, 2024
Petr Machata says: ==================== selftest: Clean-up and stabilize mirroring tests The mirroring selftests work by sending ICMP traffic between two hosts. Along the way, this traffic is mirrored to a gretap netdevice, and counter taps are then installed strategically along the path of the mirrored traffic to verify the mirroring took place. The problem with this is that besides mirroring the primary traffic, any other service traffic is mirrored as well. At the same time, because the tests need to work in HW-offloaded scenarios, the ability of the device to do arbitrary packet inspection should not be taken for granted. Most tests therefore simply use matchall, one uses flower to match on IP address. As a result, the selftests are noisy. mirror_test() accommodated this noisiness by giving the counters an allowance of several packets. But that only works up to a point, and on busy systems won't be always enough. In this patch set, clean up and stabilize the mirroring selftests. The original intention was to port the tests over to UDP, but the logic of ICMP ends up being so entangled in the mirroring selftests that the changes feel overly invasive. Instead, ICMP is kept, but where possible, we match on ICMP message type, thus filtering out hits by other ICMP messages. Where this is not practical (where the counter tap is put on a device that carries encapsulated packets), switch the counter condition to _at least_ X observed packets. This is less robust, but barely so -- probably the only scenario that this would not catch is something like erroneous packet duplication, which would hopefully get caught by the numerous other tests in this extensive suite. - Patches #1 to #3 clean up parameters at various helpers. - Patches #4 to #6 stabilize the mirroring selftests as described above. - Mirroring tests currently allow testing SW datapath even on HW netdevices by trapping traffic to the SW datapath. This complicates the tests a bit without a good reason: to test SW datapath, just run the selftests on the veth topology. Thus in patch #7, drop support for this dual SW/HW testing. - At this point, some cleanups were either made possible by the previous patches, or were always possible. In patches #8 to #11, realize these cleanups. - In patch #12, fix mlxsw mirror_gre selftest to respect setting TESTS. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
alobakin
pushed a commit
that referenced
this pull request
Jul 1, 2024
…rnel/git/netfilter/nf-next into main Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: Patch #1 to #11 to shrink memory consumption for transaction objects: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. Series from Florian Westphal. For the record, I have mangled patch #1 to add nft_trans_container_*() and use if for every transaction object. I have also added BUILD_BUG_ON to ensure struct nft_trans always comes at the beginning of the container transaction object. And few minor cleanups, any new bugs are of my own. Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno. Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang. Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting default conntrack timeouts via nfnetlink_cttimeout API, from Lin Ma. Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use larger secctx names than the existing 256 bytes length. Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving nfnetlink_queue, from Florian Westphal. Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
alobakin
pushed a commit
that referenced
this pull request
Jul 5, 2024
KFENCE reports the following UAF: BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488 Use-after-free read at 0x0000000024629571 (in kfence-#12): __pci_enable_msi_range+0x2c0/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128 allocated by task 81 on cpu 7 at 10.808142s: __kmem_cache_alloc_node+0x1f0/0x2bc kmalloc_trace+0x44/0x138 msi_alloc_desc+0x3c/0x9c msi_domain_insert_msi_desc+0x30/0x78 msi_setup_msi_desc+0x13c/0x184 __pci_enable_msi_range+0x258/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 freed by task 81 on cpu 7 at 10.811436s: msi_domain_free_descs+0xd4/0x10c msi_domain_free_locked.part.0+0xc0/0x1d8 msi_domain_alloc_irqs_all_locked+0xb4/0xbc pci_msi_setup_msi_irqs+0x30/0x4c __pci_enable_msi_range+0x2a8/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 Descriptor allocation done in: __pci_enable_msi_range msi_capability_init msi_setup_msi_desc msi_insert_msi_desc msi_domain_insert_msi_desc msi_alloc_desc ... Freed in case of failure in __msi_domain_alloc_locked() __pci_enable_msi_range msi_capability_init pci_msi_setup_msi_irqs msi_domain_alloc_irqs_all_locked msi_domain_alloc_locked __msi_domain_alloc_locked => fails msi_domain_free_locked ... That failure propagates back to pci_msi_setup_msi_irqs() in msi_capability_init() which accesses the descriptor for unmasking in the error exit path. Cure it by copying the descriptor and using the copy for the error exit path unmask operation. [ tglx: Massaged change log ] Fixes: bf6e054 ("genirq/msi: Provide msi_device_populate/destroy_sysfs()") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mostafa Saleh <smostafa@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Heelgas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240624203729.1094506-1-smostafa@google.com
alobakin
pushed a commit
that referenced
this pull request
Jul 16, 2024
Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff80008a92f5b0 x29: ffff80008a92f5b0 x28: ffff80008a92f610 x27: ffff80008a92f728 x26: 0000000000000cc0 x25: 000000000000000d x24: ffff0000cf00c858 x23: ffff80008a92f610 x22: ffffffdfc0600000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0600000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000018000000000 x15: 3374004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 3374000000000000 x10: 3374e1c0ffff6000 x9 : ffffb463a84c681c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00011c976ce0 x5 : ffffb463aa47e378 x4 : 0000000000000000 x3 : 0000000000000cc0 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 shmem_undo_range+0x2bc/0x6a8 shmem_fallocate+0x134/0x430 vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 This patch (of 4): The largest page cache order can be HPAGE_PMD_ORDER (13) on ARM64 with 64KB base page size. The xarray entry with this order can't be split as the following error messages indicate. ------------[ cut here ]------------ WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \ fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ sha1_ce virtio_net net_failover virtio_console virtio_blk failover \ dimlib virtio_mmio CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff800087a4f6c0 x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858 x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000 x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28 x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8 x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa0 xfs_flush_unmap_range+0x70/0x90 [xfs] xfs_file_fallocate+0xfc/0x4d8 [xfs] vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by decreasing MAX_PAGECACHE_ORDER to the largest supported order by xarray. For this specific case, MAX_PAGECACHE_ORDER is dropped from 13 to 11 when CONFIG_BASE_SMALL is disabled. Link: https://lkml.kernel.org/r/20240627003953.1262512-1-gshan@redhat.com Link: https://lkml.kernel.org/r/20240627003953.1262512-2-gshan@redhat.com Fixes: 793917d ("mm/readahead: Add large folio readahead") Signed-off-by: Gavin Shan <gshan@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Zhenyu Zhang <zhenyzha@redhat.com> Cc: <stable@vger.kernel.org> [5.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alobakin
pushed a commit
that referenced
this pull request
Aug 28, 2024
We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 Fixes: 18cb261 ("bonding: support hardware encryption offload to slaves") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
alobakin
pushed a commit
that referenced
this pull request
Aug 28, 2024
Ido Schimmel says:
====================
Unmask upper DSCP bits - part 1
tl;dr - This patchset starts to unmask the upper DSCP bits in the IPv4
flow key in preparation for allowing IPv4 FIB rules to match on DSCP.
No functional changes are expected.
The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.
It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.
In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset starts to unmask the upper DSCP bits in the various places
that invoke the core FIB lookup functions directly (patches #1-#7) and
in the input route path (patches #8-#12). Future patchsets will do the
same in the output route path.
No functional changes are expected as commit 1fa3314 ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.
====================
Link: https://patch.msgid.link/20240821125251.1571445-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Aug 30, 2024
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17 ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Sep 3, 2024
Ido Schimmel says:
====================
Unmask upper DSCP bits - part 2
tl;dr - This patchset continues to unmask the upper DSCP bits in the
IPv4 flow key in preparation for allowing IPv4 FIB rules to match on
DSCP. No functional changes are expected. Part 1 was merged in commit
("Merge branch 'unmask-upper-dscp-bits-part-1'").
The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.
It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.
In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset continues to unmask the upper DSCP bits, but this time in
the output route path.
Patches #1-#3 unmask the upper DSCP bits in the various places that
invoke the core output route lookup functions directly.
Patches #4-#6 do the same in three helpers that are widely used in the
output path to initialize the TOS field in the IPv4 flow key.
The rest of the patches continue to unmask these bits in call sites that
invoke the following wrappers around the core lookup functions:
Patch #7 - __ip_route_output_key()
Patches #8-#12 - ip_route_output_flow()
The next patchset will handle the callers of ip_route_output_ports() and
ip_route_output_key().
No functional changes are expected as commit 1fa3314 ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.
Changes since v1 [1]:
* Remove IPTOS_RT_MASK in patch #7 instead of in patch #6
[1] https://lore.kernel.org/netdev/20240827111813.2115285-1-idosch@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
alobakin
pushed a commit
that referenced
this pull request
Nov 4, 2024
Daniel Machon says:
====================
net: sparx5: add support for lan969x switch device
== Description:
This series is the second of a multi-part series, that prepares and adds
support for the new lan969x switch driver.
The upstreaming efforts is split into multiple series (might change a
bit as we go along):
1) Prepare the Sparx5 driver for lan969x (merged)
--> 2) add support lan969x (same basic features as Sparx5
provides excl. FDMA and VCAP).
3) Add support for lan969x VCAP, FDMA and RGMII
== Lan969x in short:
The lan969x Ethernet switch family [1] provides a rich set of
switching features and port configurations (up to 30 ports) from 10Mbps
to 10Gbps, with support for RGMII, SGMII, QSGMII, USGMII, and USXGMII,
ideal for industrial & process automation infrastructure applications,
transport, grid automation, power substation automation, and ring &
intra-ring topologies. The LAN969x family is hardware and software
compatible and scalable supporting 46Gbps to 102Gbps switch bandwidths.
== Preparing Sparx5 for lan969x:
The main preparation work for lan969x has already been merged [1].
After this series is applied, lan969x will have the same functionality
as Sparx5, except for VCAP and FDMA support. QoS features that requires
the VCAP (e.g. PSFP, port mirroring) will obviously not work until VCAP
support is added later.
== Patch breakdown:
Patch #1-#4 do some preparation work for lan969x
Patch #5 adds new registers required by lan969x
Patch #6 adds initial match data for all lan969x targets
Patch #7 defines the lan969x register differences
Patch #8 adds lan969x constants to match data
Patch #9 adds some lan969x ops in bulk
Patch #10 adds PTP function to ops
Patch #11 adds lan969x_calendar.c for calculating the calendar
Patch #12 makes additional use of the is_sparx5() macro to branch out
in certain places.
Patch #13 documents lan969x in the dt-bindings
Patch #14 adds lan969x compatible string to sparx5 driver
Patch #15 introduces new concept of per-target features
[1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com/
v1: https://lore.kernel.org/20241021-sparx5-lan969x-switch-driver-2-v1-0-c8c49ef21e0f@microchip.com
====================
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-0-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Nov 21, 2024
…buckets_create Commit b035f5a ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64. However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16. This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16], resulting in kmem_buckets_create() attempting to create a kmem_cache for size 16 twice. This duplication triggers warnings on boot: [ 2.325108] ------------[ cut here ]------------ [ 2.325135] kmem_cache of name 'memdup_user-16' already exists [ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.327957] Modules linked in: [ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.328942] sp : ffff800083d6fc50 [ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598 [ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000 [ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030 [ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.329291] Call trace: [ 2.329407] __kmem_cache_create_args+0xb8/0x3b0 [ 2.329499] kmem_buckets_create+0xfc/0x320 [ 2.329526] init_user_buckets+0x34/0x78 [ 2.329540] do_one_initcall+0x64/0x3c8 [ 2.329550] kernel_init_freeable+0x26c/0x578 [ 2.329562] kernel_init+0x3c/0x258 [ 2.329574] ret_from_fork+0x10/0x20 [ 2.329698] ---[ end trace 0000000000000000 ]--- [ 2.403704] ------------[ cut here ]------------ [ 2.404716] kmem_cache of name 'msg_msg-16' already exists [ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0 [ 2.404842] Modules linked in: [ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12 [ 2.405026] Tainted: [W]=WARN [ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024 [ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0 [ 2.405111] sp : ffff800083d6fc50 [ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598 [ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000 [ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388 [ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030 [ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120 [ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000 [ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 2.405287] Call trace: [ 2.405293] __kmem_cache_create_args+0xb8/0x3b0 [ 2.405305] kmem_buckets_create+0xfc/0x320 [ 2.405315] init_msg_buckets+0x34/0x78 [ 2.405326] do_one_initcall+0x64/0x3c8 [ 2.405337] kernel_init_freeable+0x26c/0x578 [ 2.405348] kernel_init+0x3c/0x258 [ 2.405360] ret_from_fork+0x10/0x20 [ 2.405370] ---[ end trace 0000000000000000 ]--- To address this, alias kmem_cache for sizes smaller than min alignment to the aligned sized kmem_cache, as done with the default system kmalloc bucket. Fixes: b32801d ("mm/slab: Introduce kmem_buckets_create() and family") Cc: <stable@vger.kernel.org> # v6.11+ Signed-off-by: Koichiro Den <koichiro.den@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
alobakin
pushed a commit
that referenced
this pull request
Jan 10, 2025
syzbot presented an use-after-free report [0] regarding ipvlan and linkwatch. ipvlan does not hold a refcnt of the lower device unlike vlan and macvlan. If the linkwatch work is triggered for the ipvlan dev, the lower dev might have already been freed, resulting in UAF of ipvlan->phy_dev in ipvlan_get_iflink(). We can delay the lower dev unregistration like vlan and macvlan by holding the lower dev's refcnt in dev->netdev_ops->ndo_init() and releasing it in dev->priv_destructor(). Jakub pointed out calling .ndo_XXX after unregister_netdevice() has returned is error prone and suggested [1] addressing this UAF in the core by taking commit 750e516 ("net: avoid potential UAF in default_operstate()") further. Let's assume unregistering devices DOWN and use RCU protection in default_operstate() not to race with the device unregistration. [0]: BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944 CPU: 0 UID: 0 PID: 6944 Comm: kworker/u8:35 Not tainted 6.13.0-rc2-g9bc5c9515b48 #12 4c3cb9e8b4565456f6a355f312ff91f4f29b3c47 Hardware name: linux,dummy-virt (DT) Workqueue: events_unbound linkwatch_event Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:484 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load4_noabort+0x20/0x30 mm/kasan/report_generic.c:380 ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 dev_get_iflink+0x7c/0xd8 net/core/dev.c:674 default_operstate net/core/link_watch.c:45 [inline] rfc2863_policy+0x144/0x360 net/core/link_watch.c:72 linkwatch_do_dev+0x60/0x228 net/core/link_watch.c:175 __linkwatch_run_queue+0x2f4/0x5b8 net/core/link_watch.c:239 linkwatch_event+0x64/0xa8 net/core/link_watch.c:282 process_one_work+0x700/0x1398 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3391 kthread+0x2b0/0x360 kernel/kthread.c:389 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 Allocated by task 9303: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4283 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4289 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:650 alloc_netdev_mqs+0xb4/0x1118 net/core/dev.c:11209 rtnl_create_link+0x2b8/0xb60 net/core/rtnetlink.c:3595 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3771 __rtnl_newlink net/core/rtnetlink.c:3896 [inline] rtnl_newlink+0x122c/0x15c0 net/core/rtnetlink.c:4011 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x2ec/0x438 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __arm64_sys_sendto+0xe4/0x110 net/socket.c:2200 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Freed by task 10200: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x48/0x68 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kfree+0x140/0x420 mm/slub.c:4746 kvfree+0x4c/0x68 mm/util.c:693 netdev_release+0x94/0xc8 net/core/net-sysfs.c:2034 device_release+0x98/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x2b0/0x438 lib/kobject.c:737 netdev_run_todo+0xdd8/0xf48 net/core/dev.c:10924 rtnl_unlock net/core/rtnetlink.c:152 [inline] rtnl_net_unlock net/core/rtnetlink.c:209 [inline] rtnl_dellink+0x484/0x680 net/core/rtnetlink.c:3526 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] ____sys_sendmsg+0x410/0x708 net/socket.c:2583 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2672 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 The buggy address belongs to the object at ffff0000d768c000 which belongs to the cache kmalloc-cg-4k of size 4096 The buggy address is located 224 bytes inside of freed 4096-byte region [ffff0000d768c000, ffff0000d768d000) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x117688 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff0000c77ef981 flags: 0xbfffe0000000040(head|node=0|zone=2|lastcpupid=0x1ffff) page_type: f5(slab) raw: 0bfffe0000000040 ffff0000c000f500 dead000000000100 dead000000000122 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff0000c77ef981 head: 0bfffe0000000040 ffff0000c000f500 dead000000000100 dead000000000122 head: 0000000000000000 0000000000040004 00000001f5000000 ffff0000c77ef981 head: 0bfffe0000000003 fffffdffc35da201 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0000d768bf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff0000d768c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff0000d768c080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff0000d768c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0000d768c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 8c55fac ("net: linkwatch: only report IF_OPER_LOWERLAYERDOWN if iflink is actually down") Reported-by: syzkaller <syzkaller@googlegroups.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20250102174400.085fd8ac@kernel.org/ [1] Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250106071911.64355-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Feb 5, 2025
libtraceevent parses and returns an array of argument fields, sometimes
larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr",
idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6
elements max, creating an out-of-bounds access. This runtime error is
found by UBsan. The error message:
$ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1
builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]'
#0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966
#1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110
#2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436
#3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897
#4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335
#5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502
#6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351
#7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404
#8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448
#9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556
#10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360
#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6)
0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1
Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint")
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Mar 17, 2025
Chia-Yu Chang says: ==================== AccECN protocol preparation patch series Please find the v7 v7 (03-Mar-2025) - Move 2 new patches added in v6 to the next AccECN patch series v6 (27-Dec-2024) - Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>) - Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14 - Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN) * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN) - Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>) - Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>) v5 (5-Nov-2024) - Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>) - Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>) - Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety - Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>) v4 (21-Oct-2024) - Fix line length warning of patches #2, #4, #8, #10, #11, #14 - Fix spaces preferred around '|' (ctx:VxV) warning of patch #7 - Add missing CC'ed of patches #4, #12, #14 v3 (19-Oct-2024) - Fix build error in v2 v2 (18-Oct-2024) - Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>) The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
alobakin
pushed a commit
that referenced
this pull request
Apr 1, 2025
perf test 11 hwmon fails on s390 with this error
# ./perf test -Fv 11
--- start ---
---- end ----
11.1: Basic parsing test : Ok
--- start ---
Testing 'temp_test_hwmon_event1'
Using CPUID IBM,3931,704,A01,3.7,002f
temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/
FAILED tests/hwmon_pmu.c:189 Unexpected config for
'temp_test_hwmon_event1', 292470092988416 != 655361
---- end ----
11.2: Parsing without PMU name : FAILED!
--- start ---
Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/'
FAILED tests/hwmon_pmu.c:189 Unexpected config for
'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/',
292470092988416 != 655361
---- end ----
11.3: Parsing with PMU name : FAILED!
#
The root cause is in member test_event::config which is initialized
to 0xA0001 or 655361. During event parsing a long list event parsing
functions are called and end up with this gdb call stack:
#0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8,
term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623
#1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8,
terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662
#2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0,
attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false,
apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519
#3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8,
head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8)
at util/pmu.c:1545
#4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8,
list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090,
auto_merge_stats=true, alternate_hw_config=10)
at util/parse-events.c:1508
#5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8,
event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10,
const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0)
at util/parse-events.c:1592
#6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8,
scanner=0x16878c0) at util/parse-events.y:293
#7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8
"temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8)
at util/parse-events.c:1867
#8 0x000000000126a1e8 in __parse_events (evlist=0x168b580,
str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0,
err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true,
fake_tp=false) at util/parse-events.c:2136
#9 0x00000000011e36aa in parse_events (evlist=0x168b580,
str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8)
at /root/linux/tools/perf/util/parse-events.h:41
#10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false)
at tests/hwmon_pmu.c:164
#11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false)
at tests/hwmon_pmu.c:219
#12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368
<suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23
where the attr::config is set to value 292470092988416 or 0x10a0000000000
in line 625 of file ./util/hwmon_pmu.c:
attr->config = key.type_and_num;
However member key::type_and_num is defined as union and bit field:
union hwmon_pmu_event_key {
long type_and_num;
struct {
int num :16;
enum hwmon_type type :8;
};
};
s390 is big endian and Intel is little endian architecture.
The events for the hwmon dummy pmu have num = 1 or num = 2 and
type is set to HWMON_TYPE_TEMP (which is 10).
On s390 this assignes member key::type_and_num the value of
0x10a0000000000 (which is 292470092988416) as shown in above
trace output.
Fix this and export the structure/union hwmon_pmu_event_key
so the test shares the same implementation as the event parsing
functions for union and bit fields. This should avoid
endianess issues on all platforms.
Output after:
# ./perf test -F 11
11.1: Basic parsing test : Ok
11.2: Parsing without PMU name : Ok
11.3: Parsing with PMU name : Ok
#
Fixes: 531ee0f ("perf test: Add hwmon "PMU" test")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Apr 1, 2025
Ian told me that there are many memory leaks in the hierarchy mode. I
can easily reproduce it with the follwing command.
$ make DEBUG=1 EXTRA_CFLAGS=-fsanitize=leak
$ perf record --latency -g -- ./perf test -w thloop
$ perf report -H --stdio
...
Indirect leak of 168 byte(s) in 21 object(s) allocated from:
#0 0x7f3414c16c65 in malloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:75
#1 0x55ed3602346e in map__get util/map.h:189
#2 0x55ed36024cc4 in hist_entry__init util/hist.c:476
#3 0x55ed36025208 in hist_entry__new util/hist.c:588
#4 0x55ed36027c05 in hierarchy_insert_entry util/hist.c:1587
#5 0x55ed36027e2e in hists__hierarchy_insert_entry util/hist.c:1638
#6 0x55ed36027fa4 in hists__collapse_insert_entry util/hist.c:1685
#7 0x55ed360283e8 in hists__collapse_resort util/hist.c:1776
#8 0x55ed35de0323 in report__collapse_hists /home/namhyung/project/linux/tools/perf/builtin-report.c:735
#9 0x55ed35de15b4 in __cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1119
#10 0x55ed35de43dc in cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1867
#11 0x55ed35e66767 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:351
#12 0x55ed35e66a0e in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:404
#13 0x55ed35e66b67 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:448
#14 0x55ed35e66eb0 in main /home/namhyung/project/linux/tools/perf/perf.c:556
#15 0x7f340ac33d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
...
$ perf report -H --stdio 2>&1 | grep -c '^Indirect leak'
93
I found that hist_entry__delete() missed to release child entries in the
hierarchy tree (hroot_{in,out}). It needs to iterate the child entries
and call hist_entry__delete() recursively.
After this change:
$ perf report -H --stdio 2>&1 | grep -c '^Indirect leak'
0
Reported-by: Ian Rogers <irogers@google.com>
Tested-by Thomas Falcon <thomas.falcon@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250307061250.320849-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Apr 1, 2025
The env.pmu_mapping can be leaked when it reads data from a pipe on AMD.
For a pipe data, it reads the header data including pmu_mapping from
PERF_RECORD_HEADER_FEATURE runtime. But it's already set in:
perf_session__new()
__perf_session__new()
evlist__init_trace_event_sample_raw()
evlist__has_amd_ibs()
perf_env__nr_pmu_mappings()
Then it'll overwrite that when it processes the HEADER_FEATURE record.
Here's a report from address sanitizer.
Direct leak of 2689 byte(s) in 1 object(s) allocated from:
#0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98
#1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64
#2 0x5595a7d414ef in strbuf_init util/strbuf.c:25
#3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362
#4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517
#5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315
#6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23
#7 0x5595a7d7f893 in __perf_session__new util/session.c:179
#8 0x5595a7b79572 in perf_session__new util/session.h:115
#9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603
#10 0x5595a7c019eb in run_builtin perf.c:351
#11 0x5595a7c01c92 in handle_internal_command perf.c:404
#12 0x5595a7c01deb in run_argv perf.c:448
#13 0x5595a7c02134 in main perf.c:556
#14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Let's free the existing pmu_mapping data if any.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Apr 3, 2025
When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().
An example from v5.4, similar problem also exists in upstream:
crash> bt 2091206
PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0"
#0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
#1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
#2 [ffff800084a2f880] schedule at ffff800040bfa4b4
#3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
#4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
#5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
#6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
#7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
#8 [ffff800084a2fa60] generic_make_request at ffff800040570138
#9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
#10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
#11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
#12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
#13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
#14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
#15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
#16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
#17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
#18 [ffff800084a2fe70] kthread at ffff800040118de4
After commit 2def284 ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.
Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait().
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Tianxiang Peng <txpeng@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
alobakin
pushed a commit
that referenced
this pull request
Apr 3, 2025
…ge_order() Patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT", v3. Let's add an "easy" way to decide -- without false positives, without page-mapcounts and without page table/rmap scanning -- whether a large folio is "certainly mapped exclusively" into a single MM, or whether it "maybe mapped shared" into multiple MMs. Use that information to implement Copy-on-Write reuse, to convert folio_likely_mapped_shared() to folio_maybe_mapped_share(), and to introduce a kernel config option that lets us not use+maintain per-page mapcounts in large folios anymore. The bigger picture was presented at LSF/MM [1]. This series is effectively a follow-up on my early work [2], which implemented a more precise, but also more complicated, way to identify whether a large folio is "mapped shared" into multiple MMs or "mapped exclusively" into a single MM. 1 Patch Organization ==================== Patch #1 -> #6: make more room in order-1 folios, so we have two "unsigned long" available for our purposes Patch #7 -> #11: preparations Patch #12: MM owner tracking for large folios Patch #13: COW reuse for PTE-mapped anon THP Patch #14: folio_maybe_mapped_shared() Patch #15 -> #20: introduce and implement CONFIG_NO_PAGE_MAPCOUNT 2 MM owner tracking =================== We assign each MM a unique ID ("MM ID"), to be able to squeeze more information in our folios. On 32bit we use 15-bit IDs, on 64bit we use 31-bit IDs. For each large folios, we now store two MM-ID+mapcount ("slot") combinations: * mm0_id + mm0_mapcount * mm1_id + mm1_mapcount On 32bit, we use a 16-bit per-MM mapcount, on 64bit an ordinary 32bit mapcount. This way, we require 2x "unsigned long" on 32bit and 64bit for both slots. Paired with the large mapcount, we can reliably identify whether one of these MMs is the current owner (-> owns all mappings) or even holds all folio references (-> owns all mappings, and all references are from mappings). As long as only two MMs map folio pages at a time, we can reliably and precisely identify whether a large folio is "mapped shared" or "mapped exclusively". Any additional MM that starts mapping the folio while there are no free slots becomes an "untracked MM". If one such "untracked MM" is the last one mapping a folio exclusively, we will not detect the folio as "mapped exclusively" but instead as "maybe mapped shared". (exception: only a single mapping remains) So that's where the approach gets imprecise. For now, we use a bit-spinlock to sync the large mapcount + slots, and make sure we do keep the machinery fast, to not degrade (un)map performance drastically: for example, we make sure to only use a single atomic (when grabbing the bit-spinlock), like we would already perform when updating the large mapcount. 3 CONFIG_NO_PAGE_MAPCOUNT ========================= patch #15 -> #20 spell out and document what exactly is affected when not maintaining the per-page mapcounts in large folios anymore. Most importantly, as we cannot maintain folio->_nr_pages_mapped anymore when (un)mapping pages, we'll account a complete folio as mapped if a single page is mapped. In addition, we'll not detect partially mapped anonymous folios as such in all cases yet. Likely less relevant changes include that we might now under-estimate the USS (Unique Set Size) of a process, but never over-estimate it. The goal is to make CONFIG_NO_PAGE_MAPCOUNT the default at some point, to then slowly make it the only option, as we learn about real-life impacts and possible ways to mitigate them. 4 Performance ============= Detailed performance numbers were included in v1 [3], and not that much changed between v1 and v2. I did plenty of measurements on different systems in the meantime, that all revealed slightly different results. The pte-mapped-folio micro-benchmarks [4] are fairly sensitive to code layout changes on some systems. Especially the fork() benchmark started being more-shaky-than-before on recent kernels for some reason. In summary, with my micro-benchmarks: * Small folios are not impacted. * CoW performance seems to be mostly unchanged across all folios sizes. * CoW reuse performance of large folios now matches CoW reuse performance of small folios, because we now actually implement the CoW reuse optimization. On an Intel Xeon Silver 4210R I measured a ~65% reduction in runtime, on an arm64 system I measured ~54% reduction. * munmap() performance improves with CONFIG_NO_PAGE_MAPCOUNT. I saw double-digit % reduction (up to ~30% on an Intel Xeon Silver 4210R and up to ~70% on an AmpereOne A192-32X) with larger folios. The larger the folios, the larger the performance improvement. * munmao() performance very slightly (couple percent) degrades without CONFIG_NO_PAGE_MAPCOUNT for smaller folios. For larger folios, there seems to be no change at all. * fork() performance improves with CONFIG_NO_PAGE_MAPCOUNT. I saw double-digit % reduction (up to ~20% on an Intel Xeon Silver 4210R and up to ~10% on an AmpereOne A192-32X) with larger folios. The larger the folios, the larger the performance improvement. * While fork() performance without CONFIG_NO_PAGE_MAPCOUNT seems to be almost unchanged on some systems, I saw some degradation for smaller folios on the AmpereOne A192-32X. I did not investigate the details yet, but I suspect code layout changes or suboptimal code placement / inlining. I'm not to worried about the fork() micro-benchmarks for smaller folios given how shaky the results are lately and by how much we improved fork() performance recently. I also ran case-anon-cow-rand and case-anon-cow-seq part of vm-scalability, to assess the scalability and the impact of the bit-spinlock. My measurements on a two 2-socket 10-core Intel Xeon Silver 4210R CPU revealed no significant changes. Similarly, running these benchmarks with 2 MiB THPs enabled on the AmpereOne A192-32X with 192 cores, I got < 1% difference with < 1% stdev, which is nice. So far, I did not get my hands on a similarly large system with multiple sockets. I found no other fitting scalability benchmarks that seem to really hammer on concurrent mapping/unmapping of large folio pages like case-anon-cow-seq does. 5 Concerns ========== 5.1 Bit spinlock ---------------- I'm not quite happy about the bit-spinlock, but so far it does not seem to affect scalability in my measurements. If it ever becomes a problem we could either investigate improving the locking, or simply stopping the MM tracking once there are "too many mappings" and simply assume that the folio is "mapped shared" until it was freed. This would be similar (but slightly different) to the "0,1,2,stopped" counting idea Willy had at some point. Adding that logic to "stop tracking" adds more code to the hot path, so I avoided that for now. 5.2 folio_maybe_mapped_shared() ------------------------------- I documented the change from folio_likely_mapped_shared() to folio_maybe_mapped_shared() quite extensively. If we run into surprises, I have some ideas on how to resolve them. For now, I think we should be fine. 5.3 Added code to map/unmap hot path ------------------------------------ So far, it looks like the added code on the rmap hot path does not really seem to matter much in the bigger picture. I'd like to further reduce it (and possibly improve fork() performance further), but I don't easily see how right now. Well, and I am out of puff 🙂 Having that said, alternatives I considered (e.g., per-MM per-folio mapcount) would add a lot more overhead to these hot paths. 6 Future Work ============= 6.1 Large mapcount ------------------ It would be very handy if the large mapcount would count how often folio pages are actually mapped into page tables: a PMD on x86-64 would count 512 times. Calculating the average per-page mapcount will be easy, and remapping (PMD->PTE) folios would get even faster. That would also remove the need for the entire mapcount (except for PMD-sized folios for memory statistics reasons ...), and allow for mapping folios larger than PMDs (e.g., 4 MiB) easily. We likely would also have to take the same number of folio references to make our folio_mapcount() == folio_ref_count() work, and we'd want to be able to avoid mapcount+refcount overflows: this could already become an issue with pte-mapped PUD-sized folios (fsdax). One approach we discussed in the THP cabal meeting is (1) extending the mapcount for large folios to 64bit (at least on 64bit systems) and (2) keeping the refcount at 32bit, but (3) having exactly one reference if the the mapcount != 0. It should be doable, but there are some corner cases to consider on the unmap path; it is something that I will be looking into next. 6.2 hugetlb ----------- I'd love to make use of the same tracking also for hugetlb. The real problem is PMD table sharing: getting a page mapped by MM X and unmapped by MM Y will not work. With mshare, that problem should not exist (all mapping/unmapping will be routed through the mshare MM). [1] https://lwn.net/Articles/974223/ [2] https://lore.kernel.org/linux-mm/a9922f58-8129-4f15-b160-e0ace581bcbe@redhat.com/T/ [3] https://lkml.kernel.org/r/20240829165627.2256514-1-david@redhat.com [4] https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/pte-mapped-folio-benchmarks.c This patch (of 20): Let's factor it out into a simple helper function. This helper will also come in handy when working with code where we know that our folio is large. Maybe in the future we'll have the order readily available for small and large folios; in that case, folio_large_order() would simply translate to folio_order(). Link: https://lkml.kernel.org/r/20250303163014.1128035-1-david@redhat.com Link: https://lkml.kernel.org/r/20250303163014.1128035-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lance Yang <ioworker0@gmail.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alobakin
pushed a commit
that referenced
this pull request
May 12, 2025
… prevent wrong idmap generation
The PTE_MAYBE_NG macro sets the nG page table bit according to the value
of "arm64_use_ng_mappings". This variable is currently placed in the
.bss section. create_init_idmap() is called before the .bss section
initialisation which is done in early_map_kernel(). Therefore,
data/test_prot in create_init_idmap() could be set incorrectly through
the PAGE_KERNEL -> PROT_DEFAULT -> PTE_MAYBE_NG macros.
# llvm-objdump-21 --syms vmlinux-gcc | grep arm64_use_ng_mappings
ffff800082f242a8 g O .bss 0000000000000001 arm64_use_ng_mappings
The create_init_idmap() function disassembly compiled with llvm-21:
// create_init_idmap()
ffff80008255c058: d10103f sub sp, sp, #0x40
ffff80008255c05c: a9017bfd stp x29, x30, [sp, #0x10]
ffff80008255c060: a90257f6 stp x22, x21, [sp, #0x20]
ffff80008255c064: a9034ff4 stp x20, x19, [sp, #0x30]
ffff80008255c068: 910043fd add x29, sp, #0x10
ffff80008255c06c: 90003fc8 adrp x8, 0xffff800082d54000
ffff80008255c070: d280e06a mov x10, #0x703 // =1795
ffff80008255c074: 91400409 add x9, x0, #0x1, lsl #12 // =0x1000
ffff80008255c078: 394a4108 ldrb w8, [x8, #0x290] ------------- (1)
ffff80008255c07c: f2e00d0a movk x10, #0x68, lsl torvalds#48
ffff80008255c080: f90007e9 str x9, [sp, #0x8]
ffff80008255c084: aa0103f3 mov x19, x1
ffff80008255c088: aa0003f4 mov x20, x0
ffff80008255c08c: 14000000 b 0xffff80008255c08c <__pi_create_init_idmap+0x34>
ffff80008255c090: aa082d56 orr x22, x10, x8, lsl #11 -------- (2)
Note (1) is loading the arm64_use_ng_mappings value in w8 and (2) is set
the text or data prot with the w8 value to set PTE_NG bit. If the .bss
section isn't initialized, x8 could include a garbage value and generate
an incorrect mapping.
Annotate arm64_use_ng_mappings as __read_mostly so that it is placed in
the .data section.
Fixes: 84b04d3 ("arm64: kernel: Create initial ID map from C code")
Cc: stable@vger.kernel.org # 6.9.x
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250502180412.3774883-1-yeoreum.yun@arm.com
[catalin.marinas@arm.com: use __read_mostly instead of __ro_after_init]
[catalin.marinas@arm.com: slight tweaking of the code comment]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
alobakin
pushed a commit
that referenced
this pull request
May 12, 2025
Ido Schimmel says: ==================== vxlan: Convert FDB table to rhashtable The VXLAN driver currently stores FDB entries in a hash table with a fixed number of buckets (256), resulting in reduced performance as the number of entries grows. This patchset solves the issue by converting the driver to use rhashtable which maintains a more or less constant performance regardless of the number of entries. Measured transmitted packets per second using a single pktgen thread with varying number of entries when the transmitted packet always hits the default entry (worst case): Number of entries | Improvement ------------------|------------ 1k | +1.12% 4k | +9.22% 16k | +55% 64k | +585% 256k | +2460% The first patches are preparations for the conversion in the last patch. Specifically, the series is structured as follows: Patch #1 adds RCU read-side critical sections in the Tx path when accessing FDB entries. Targeting at net-next as I am not aware of any issues due to this omission despite the code being structured that way for a long time. Without it, traces will be generated when converting FDB lookup to rhashtable_lookup(). Patch #2-#5 simplify the creation of the default FDB entry (all-zeroes). Current code assumes that insertion into the hash table cannot fail, which will no longer be true with rhashtable. Patches #6-#10 add FDB entries to a linked list for entry traversal instead of traversing over them using the fixed size hash table which is removed in the last patch. Patches #11-#12 add wrappers for FDB lookup that make it clear when each should be used along with lockdep annotations. Needed as a preparation for rhashtable_lookup() that must be called from an RCU read-side critical section. Patch #13 treats dst cache initialization errors as non-fatal. See more info in the commit message. The current code happens to work because insertion into the fixed size hash table is slow enough for the per-CPU allocator to be able to create new chunks of per-CPU memory. Patch #14 adds an FDB key structure that includes the MAC address and source VNI. To be used as rhashtable key. Patch #15 does the conversion to rhashtable. ==================== Link: https://patch.msgid.link/20250415121143.345227-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
alobakin
pushed a commit
that referenced
this pull request
May 27, 2025
Biju Das <biju.das.jz@bp.renesas.com> says:
The CAN-FD module on RZ/G3E is very similar to the one on both R-Car V4H
and RZ/G2L, but differs in some hardware parameters:
* No external clock, but instead has ram clock.
* Support up to 6 channels.
* 20 interrupts.
v8->v9:
* Collected tags.
* Added missing header bitfield.h.
* Fixed logical error ch->BIT(ch) in rcar_canfd_global_error().
* Removed unneeded double space in rcar_canfd_setrnc().
* Updated commit description in patch#15.
v7->v8:
* Collected tags.
* Updated commit description for patch#{5,9,15,16,17}.
* Replaced the macro RCANFD_GERFL_EEF0_7->RCANFD_GERFL_EEF.
* Dropped the redundant macro RCANFD_GERFL_EEF(ch).
* Added patch for dropping the mask operation in RCANFD_GAFLCFG_SETRNC
macro.
* Converted RCANFD_GAFLCFG_SETRNC->rcar_canfd_setrnc().
* Updated RCANFD_GAFLCFG macro by replacing the parameter ch->w, where w
is the GAFLCFG index used in the hardware manual.
* Renamed the parameter x->page_num in RCANFD_GAFLECTR_AFLPN macro to
make it clear.
* Renamed the parameter x->cftml in RCANFD_CFCC_CFTML macro to make it
clear.
* Updated {rzg2l,car_gen3_hw_info} with ch_interface_mode = 0.
* Updated {rzg2l,rcar_gen3}_hw_info with shared_can_regs = 0.
* Started using struct rcanfd_regs instead of LUT for reg offsets.
* Started using struct rcar_canfd_shift_data instead of LUT for shift
data.
* Renamed only_internal_clks->external_clk to avoid negation.
* Updated rcar_canfd_hw_info tables with external_clk entries.
* Replaced 10->sizeof(name) in scnprintf().
v6->v7:
* Collected tags
* Replaced 'aswell'->'as well' in patch#11 commit description.
v5->v6:
* Replaced RCANFD_RNC_PER_REG macro with rnc_stride variable.
* Updated commit description for patch#7 and #8
* Dropped mask_table:
AFLPN_MASK is replaced by max_aflpn variable.
CFTML_MASK is replaced by max_cftml variable.
BITTIMING MASK's are replaced by {nom,data}_bittiming variables.
* Collected tag from Geert.
v4->v5:
* Collected tag from Geert.
* The rules for R-Car Gen3/4 could be kept together, reducing the number
of lines. Similar change for rzg2l-canfd aswell.
* Keeping interrupts and resets together allows to keep a clear
separation between RZ/G2L and RZ/G3E, at the expense of only
a single line.
* Retained the tags for binding patches as it is trivial changes.
* Dropped the unused macro RCANFD_GAFLCFG_GETRNC.
* Updated macro RCANFD_GERFL_ERR by using gpriv->channels_mask and
dropped unused macro RCANFD_GERFL_EEF0_7.
* Replaced RNC mask in RCANFD_GAFLCFG_SETRNC macro by using
info->num_supported_rules variable.
* Updated the macro RCANFD_GAFLCFG by using info->rnc_field_width
variable.
* Updated shift value in RCANFD_GAFLCFG_SETRNC macro by using a formula
(32 - (n % rnc_per_reg + 1) * field_width).
* Replaced the variable name shared_can_reg->shared_can_regs.
* Improved commit description for patch{#11,#12}by replacing has->have.
* Dropped RCANFD_EEF_MASK and RCANFD_RNC_MASK as it is taken
care by gpriv->channels_mask and info->num_supported_rules.
* Dropped RCANFD_FIRST_RNC_SH and RCANFD_SECOND_RNC_SH by using a
formula (32 - (n % rnc_per_reg + 1) * rnc_field_width.
* Improved commit description by "All SoCs supports extenal clock"->
"All existing SoCs support an external clock".
* Updated error description in probe as "cannot get enabled ram clock"
* Updated r9a09g047_hw_info table.
v3->v4:
* Added Rb tag from Rob for patch#2.
* Added prefix RCANFD_* to enum rcar_canfd_reg_offset_id.
* Added prefix RCANFD_* to enum rcar_canfd_mask_id.
* Added prefix RCANFD_* to enum rcar_canfd_shift_id.
v2->v3:
* Collected tags.
* Dropped reg_gen4() and is_gen4() by adding mask_table, shift_table,
regs, ch_interface_mode and shared_can_reg variables to
struct rcar_canfd_hw_info.
v1->v2:
* Split the series with fixes patch separately.
* Added patch for Simplify rcar_canfd_probe() using
of_get_available_child_by_name() as dependency patch hit on can-next.
* Added Rb tag from Vincent Mailhol.
* Dropped redundant comment from commit description for patch#3.
Link: https://patch.msgid.link/20250417054320.14100-1-biju.das.jz@bp.renesas.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
alobakin
pushed a commit
that referenced
this pull request
Jun 9, 2025
echo_skb_max should define the supported upper limit of echo_skb[] allocated inside the netdevice's priv. The corresponding size value provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT which is 17. But later echo_skb_max is rounded up to the nearest power of two (for the max case, that would be 32) and the tx/ack indices calculated further during tx/rx may exceed the upper array boundary. Kasan reported this for the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit function has actually caught the same thing earlier. BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528 Read of size 8 at addr ffff888105e4f078 by task swapper/4/0 CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary) Call Trace: <IRQ> dump_stack_lvl lib/dump_stack.c:122 print_report mm/kasan/report.c:521 kasan_report mm/kasan/report.c:634 kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528 kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605 kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656 kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684 kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733 __handle_irq_event_percpu kernel/irq/handle.c:158 handle_irq_event kernel/irq/handle.c:210 handle_edge_irq kernel/irq/chip.c:833 __common_interrupt arch/x86/kernel/irq.c:296 common_interrupt arch/x86/kernel/irq.c:286 </IRQ> Tx max count definitely matters for kvaser_pciefd_tx_avail(), but for seq numbers' generation that's not the case - we're free to calculate them as would be more convenient, not taking tx max count into account. The only downside is that the size of echo_skb[] should correspond to the max seq number (not tx max count), so in some situations a bit more memory would be consumed than could be. Thus make the size of the underlying echo_skb[] sufficient for the rounded max tx value. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 8256e0c ("can: kvaser_pciefd: Fix echo_skb race") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Link: https://patch.msgid.link/20250528192713.63894-1-pchelkin@ispras.ru Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
alobakin
pushed a commit
that referenced
this pull request
Jun 18, 2025
Petr Machata says: ==================== ipmr, ip6mr: Allow MC-routing locally-generated MC packets Multicast routing is today handled in the input path. Locally generated MC packets don't hit the IPMR code. Thus if a VXLAN remote address is multicast, the driver needs to set an OIF during route lookup. In practice that means that MC routing configuration needs to be kept in sync with the VXLAN FDB and MDB. Ideally, the VXLAN packets would be routed by the MC routing code instead. To that end, this patchset adds support to route locally generated multicast packets. However, an installation that uses a VXLAN underlay netdevice for which it also has matching MC routes, would get a different routing with this patch. Previously, the MC packets would be delivered directly to the underlay port, whereas now they would be MC-routed. In order to avoid this change in behavior, introduce an IPCB/IP6CB flag. Unless the flag is set, the new MC-routing code is skipped. All this is keyed to a new VXLAN attribute, IFLA_VXLAN_MC_ROUTE. Only when it is set does any of the above engage. In addition to that, and as is the case today with MC forwarding, IPV4_DEVCONF_MC_FORWARDING must be enabled for the netdevice that acts as a source of MC traffic (i.e. the VXLAN PHYS_DEV), so an MC daemon must be attached to the netdevice. When a VXLAN netdevice with a MC remote is brought up, the physical netdevice joins the indicated MC group. This is important for local delivery of MC packets, so it is still necessary to configure a physical netdevice -- the parameter cannot go away. The netdevice would however typically not be a front panel port, but a dummy. An MC daemon would then sit on top of that netdevice as well as any front panel ports that it needs to service, and have routes set up between the two. A way to configure the VXLAN netdevice to take advantage of the new MC routing would be: # ip link add name d up type dummy # ip link add name vx10 up type vxlan id 1000 dstport 4789 \ local 192.0.2.1 group 225.0.0.1 ttl 16 dev d mrcoute # ip link set dev vx10 master br # plus vlans etc. With the following MC routes: (192.0.2.1, 225.0.0.1) iif=d oil=swp1,swp2 # TX route (*, 225.0.0.1) iif=swp1 oil=d,swp2 # RX route (*, 225.0.0.1) iif=swp2 oil=d,swp1 # RX route The RX path has not changed, with the exception of an extra MC hop. Packets are delivered to the front panel port and MC-forwarded to the VXLAN physical port, here "d". Since the port has joined the multicast group, the packets are locally delivered, and end up being processed by the VXLAN netdevice. This patchset is based on earlier patches from Nikolay Aleksandrov and Roopa Prabhu, though it underwent significant changes. Roopa broadly presented the topic on LPC 2019 [0]. Patchset progression: - Patches #1 to #4 add ip_mr_output() - Patches #5 to #10 add ip6_mr_output() - Patch #11 adds the VXLAN bits to enable MR engagement - Patches #12 to #14 prepare selftest libraries - Patch #15 includes a new test suite [0] https://www.youtube.com/watch?v=xlReECfi-uo ==================== Link: https://patch.msgid.link/cover.1750113335.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Jul 11, 2025
In probe appletb_kbd_probe() a "struct appletb_kbd *kbd" is allocated via devm_kzalloc() to store touch bar keyboard related data. Later on if backlight_device_get_by_name() finds a backlight device with name "appletb_backlight" a timer (kbd->inactivity_timer) is setup with appletb_inactivity_timer() and the timer is armed to run after appletb_tb_dim_timeout (60) seconds. A use-after-free is triggered when failure occurs after the timer is armed. This ultimately means probe failure occurs and as a result the "struct appletb_kbd *kbd" which is device managed memory is freed. After 60 seconds the timer will have expired and __run_timers will attempt to access the timer (kbd->inactivity_timer) however the kdb structure has been freed causing a use-after free. [ 71.636938] ================================================================== [ 71.637915] BUG: KASAN: slab-use-after-free in __run_timers+0x7ad/0x890 [ 71.637915] Write of size 8 at addr ffff8881178c5958 by task swapper/1/0 [ 71.637915] [ 71.637915] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.16.0-rc2-00318-g739a6c93cc75-dirty #12 PREEMPT(voluntary) [ 71.637915] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 71.637915] Call Trace: [ 71.637915] <IRQ> [ 71.637915] dump_stack_lvl+0x53/0x70 [ 71.637915] print_report+0xce/0x670 [ 71.637915] ? __run_timers+0x7ad/0x890 [ 71.637915] kasan_report+0xce/0x100 [ 71.637915] ? __run_timers+0x7ad/0x890 [ 71.637915] __run_timers+0x7ad/0x890 [ 71.637915] ? __pfx___run_timers+0x10/0x10 [ 71.637915] ? update_process_times+0xfc/0x190 [ 71.637915] ? __pfx_update_process_times+0x10/0x10 [ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0 [ 71.637915] ? _raw_spin_lock_irq+0x80/0xe0 [ 71.637915] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 71.637915] run_timer_softirq+0x141/0x240 [ 71.637915] ? __pfx_run_timer_softirq+0x10/0x10 [ 71.637915] ? __pfx___hrtimer_run_queues+0x10/0x10 [ 71.637915] ? kvm_clock_get_cycles+0x18/0x30 [ 71.637915] ? ktime_get+0x60/0x140 [ 71.637915] handle_softirqs+0x1b8/0x5c0 [ 71.637915] ? __pfx_handle_softirqs+0x10/0x10 [ 71.637915] irq_exit_rcu+0xaf/0xe0 [ 71.637915] sysvec_apic_timer_interrupt+0x6c/0x80 [ 71.637915] </IRQ> [ 71.637915] [ 71.637915] Allocated by task 39: [ 71.637915] kasan_save_stack+0x33/0x60 [ 71.637915] kasan_save_track+0x14/0x30 [ 71.637915] __kasan_kmalloc+0x8f/0xa0 [ 71.637915] __kmalloc_node_track_caller_noprof+0x195/0x420 [ 71.637915] devm_kmalloc+0x74/0x1e0 [ 71.637915] appletb_kbd_probe+0x37/0x3c0 [ 71.637915] hid_device_probe+0x2d1/0x680 [ 71.637915] really_probe+0x1c3/0x690 [ 71.637915] __driver_probe_device+0x247/0x300 [ 71.637915] driver_probe_device+0x49/0x210 [...] [ 71.637915] [ 71.637915] Freed by task 39: [ 71.637915] kasan_save_stack+0x33/0x60 [ 71.637915] kasan_save_track+0x14/0x30 [ 71.637915] kasan_save_free_info+0x3b/0x60 [ 71.637915] __kasan_slab_free+0x37/0x50 [ 71.637915] kfree+0xcf/0x360 [ 71.637915] devres_release_group+0x1f8/0x3c0 [ 71.637915] hid_device_probe+0x315/0x680 [ 71.637915] really_probe+0x1c3/0x690 [ 71.637915] __driver_probe_device+0x247/0x300 [ 71.637915] driver_probe_device+0x49/0x210 [...] The root cause of the issue is that the timer is not disarmed on failure paths leading to it remaining active and accessing freed memory. To fix this call timer_delete_sync() to deactivate the timer. Another small issue is that timer_delete_sync is called unconditionally in appletb_kbd_remove(), fix this by checking for a valid kbd->backlight_dev before calling timer_delete_sync. Fixes: 93a0fc4 ("HID: hid-appletb-kbd: add support for automatic brightness control while using the touchbar") Cc: stable@vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reviewed-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
alobakin
pushed a commit
that referenced
this pull request
Aug 4, 2025
Without the change `perf `hangs up on charaster devices. On my system
it's enough to run system-wide sampler for a few seconds to get the
hangup:
$ perf record -a -g --call-graph=dwarf
$ perf report
# hung
`strace` shows that hangup happens on reading on a character device
`/dev/dri/renderD128`
$ strace -y -f -p 2780484
strace: Process 2780484 attached
pread64(101</dev/dri/renderD128>, strace: Process 2780484 detached
It's call trace descends into `elfutils`:
$ gdb -p 2780484
(gdb) bt
#0 0x00007f5e508f04b7 in __libc_pread64 (fd=101, buf=0x7fff9df7edb0, count=0, offset=0)
at ../sysdeps/unix/sysv/linux/pread64.c:25
#1 0x00007f5e52b79515 in read_file () from /<<NIX>>/elfutils-0.192/lib/libelf.so.1
#2 0x00007f5e52b25666 in libdw_open_elf () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#3 0x00007f5e52b25907 in __libdw_open_file () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#4 0x00007f5e52b120a9 in dwfl_report_elf@@ELFUTILS_0.156 ()
from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#5 0x000000000068bf20 in __report_module (al=al@entry=0x7fff9df80010, ip=ip@entry=139803237033216, ui=ui@entry=0x5369b5e0)
at util/dso.h:537
#6 0x000000000068c3d1 in report_module (ip=139803237033216, ui=0x5369b5e0) at util/unwind-libdw.c:114
#7 frame_callback (state=0x535aef10, arg=0x5369b5e0) at util/unwind-libdw.c:242
#8 0x00007f5e52b261d3 in dwfl_thread_getframes () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#9 0x00007f5e52b25bdb in get_one_thread_cb () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#10 0x00007f5e52b25faa in dwfl_getthreads () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#11 0x00007f5e52b26514 in dwfl_getthread_frames () from /<<NIX>>/elfutils-0.192/lib/libdw.so.1
#12 0x000000000068c6ce in unwind__get_entries (cb=cb@entry=0x5d4620 <unwind_entry>, arg=arg@entry=0x10cd5fa0,
thread=thread@entry=0x1076a290, data=data@entry=0x7fff9df80540, max_stack=max_stack@entry=127,
best_effort=best_effort@entry=false) at util/thread.h:152
#13 0x00000000005dae95 in thread__resolve_callchain_unwind (evsel=0x106006d0, thread=0x1076a290, cursor=0x10cd5fa0,
sample=0x7fff9df80540, max_stack=127, symbols=true) at util/machine.c:2939
#14 thread__resolve_callchain_unwind (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, sample=0x7fff9df80540,
max_stack=127, symbols=true) at util/machine.c:2920
#15 __thread__resolve_callchain (thread=0x1076a290, cursor=0x10cd5fa0, evsel=0x106006d0, evsel@entry=0x7fff9df80440,
sample=0x7fff9df80540, parent=parent@entry=0x7fff9df804a0, root_al=root_al@entry=0x7fff9df80440, max_stack=127, symbols=true)
at util/machine.c:2970
#16 0x00000000005d0cb2 in thread__resolve_callchain (thread=<optimized out>, cursor=<optimized out>, evsel=0x7fff9df80440,
sample=<optimized out>, parent=0x7fff9df804a0, root_al=0x7fff9df80440, max_stack=127) at util/machine.h:198
#17 sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fff9df804a0,
evsel=evsel@entry=0x106006d0, al=al@entry=0x7fff9df80440, max_stack=max_stack@entry=127) at util/callchain.c:1127
#18 0x0000000000617e08 in hist_entry_iter__add (iter=iter@entry=0x7fff9df80480, al=al@entry=0x7fff9df80440, max_stack_depth=127,
arg=arg@entry=0x7fff9df81ae0) at util/hist.c:1255
#19 0x000000000045d2d0 in process_sample_event (tool=0x7fff9df81ae0, event=<optimized out>, sample=0x7fff9df80540,
evsel=0x106006d0, machine=<optimized out>) at builtin-report.c:334
#20 0x00000000005e3bb1 in perf_session__deliver_event (session=0x105ff2c0, event=0x7f5c7d735ca0, tool=0x7fff9df81ae0,
file_offset=2914716832, file_path=0x105ffbf0 "perf.data") at util/session.c:1367
#21 0x00000000005e8d93 in do_flush (oe=0x105ffa50, show_progress=false) at util/ordered-events.c:245
#22 __ordered_events__flush (oe=0x105ffa50, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:324
#23 0x00000000005e1f64 in perf_session__process_user_event (session=0x105ff2c0, event=0x7f5c7d752b18, file_offset=2914835224,
file_path=0x105ffbf0 "perf.data") at util/session.c:1419
#24 0x00000000005e47c7 in reader__read_event (rd=rd@entry=0x7fff9df81260, session=session@entry=0x105ff2c0,
--Type <RET> for more, q to quit, c to continue without paging--
quit
prog=prog@entry=0x7fff9df81220) at util/session.c:2132
#25 0x00000000005e4b37 in reader__process_events (rd=0x7fff9df81260, session=0x105ff2c0, prog=0x7fff9df81220)
at util/session.c:2181
#26 __perf_session__process_events (session=0x105ff2c0) at util/session.c:2226
#27 perf_session__process_events (session=session@entry=0x105ff2c0) at util/session.c:2390
#28 0x0000000000460add in __cmd_report (rep=0x7fff9df81ae0) at builtin-report.c:1076
torvalds#29 cmd_report (argc=<optimized out>, argv=<optimized out>) at builtin-report.c:1827
torvalds#30 0x00000000004c5a40 in run_builtin (p=p@entry=0xd8f7f8 <commands+312>, argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0)
at perf.c:351
torvalds#31 0x00000000004c5d63 in handle_internal_command (argc=argc@entry=1, argv=argv@entry=0x7fff9df844b0) at perf.c:404
torvalds#32 0x0000000000442de3 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:448
torvalds#33 main (argc=<optimized out>, argv=0x7fff9df844b0) at perf.c:556
The hangup happens because nothing in` perf` or `elfutils` checks if a
mapped file is easily readable.
The change conservatively skips all non-regular files.
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250505174419.2814857-1-slyich@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Aug 4, 2025
Symbolize stack traces by creating a live machine. Add this
functionality to dump_stack and switch dump_stack users to use
it. Switch TUI to use it. Add stack traces to the child test function
which can be useful to diagnose blocked code.
Example output:
```
$ perf test -vv PERF_RECORD_
...
7: PERF_RECORD_* events & perf_sample fields:
7: PERF_RECORD_* events & perf_sample fields : Running (1 active)
^C
Signal (2) while running tests.
Terminating tests with the same signal
Internal test harness failure. Completing any started tests:
: 7: PERF_RECORD_* events & perf_sample fields:
---- unexpected signal (2) ----
#0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0
#1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
#2 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64
#3 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72
#4 0x7fc12fef1393 in __nanosleep nanosleep.c:26
#5 0x7fc12ff02d68 in __sleep sleep.c:55
#6 0x55788c63196b in test__PERF_RECORD perf-record.c:0
#7 0x55788c620fb0 in run_test_child builtin-test.c:0
#8 0x55788c5bd18d in start_command run-command.c:127
#9 0x55788c621ef3 in __cmd_test builtin-test.c:0
#10 0x55788c6225bf in cmd_test ??:0
#11 0x55788c5afbd0 in run_builtin perf.c:0
#12 0x55788c5afeeb in handle_internal_command perf.c:0
#13 0x55788c52b383 in main ??:0
#14 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74
#15 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
#16 0x55788c52b9d1 in _start ??:0
---- unexpected signal (2) ----
#0 0x55788c6210a3 in child_test_sig_handler builtin-test.c:0
#1 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
#2 0x7fc12fea3a14 in pthread_sigmask@GLIBC_2.2.5 pthread_sigmask.c:45
#3 0x7fc12fe49fd9 in __GI___sigprocmask sigprocmask.c:26
#4 0x7fc12ff2601b in __longjmp_chk longjmp.c:36
#5 0x55788c6210c0 in print_test_result.isra.0 builtin-test.c:0
#6 0x7fc12fe49df0 in __restore_rt libc_sigaction.c:0
#7 0x7fc12fe99687 in __internal_syscall_cancel cancellation.c:64
#8 0x7fc12fee5f7a in clock_nanosleep@GLIBC_2.2.5 clock_nanosleep.c:72
#9 0x7fc12fef1393 in __nanosleep nanosleep.c:26
#10 0x7fc12ff02d68 in __sleep sleep.c:55
#11 0x55788c63196b in test__PERF_RECORD perf-record.c:0
#12 0x55788c620fb0 in run_test_child builtin-test.c:0
#13 0x55788c5bd18d in start_command run-command.c:127
#14 0x55788c621ef3 in __cmd_test builtin-test.c:0
#15 0x55788c6225bf in cmd_test ??:0
#16 0x55788c5afbd0 in run_builtin perf.c:0
#17 0x55788c5afeeb in handle_internal_command perf.c:0
#18 0x55788c52b383 in main ??:0
#19 0x7fc12fe33ca8 in __libc_start_call_main libc_start_call_main.h:74
#20 0x7fc12fe33d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
#21 0x55788c52b9d1 in _start ??:0
7: PERF_RECORD_* events & perf_sample fields : Skip (permissions)
```
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250624210500.2121303-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Aug 4, 2025
Calling perf top with branch filters enabled on Intel CPU's
with branch counters logging (A.K.A LBR event logging [1]) support
results in a segfault.
$ perf top -e '{cpu_core/cpu-cycles/,cpu_core/event=0xc6,umask=0x3,frontend=0x11,name=frontend_retired_dsb_miss/}' -j any,counter
...
Thread 27 "perf" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffafff76c0 (LWP 949003)]
perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653
653 *width = env->cpu_pmu_caps ? env->br_cntr_width :
(gdb) bt
#0 perf_env__find_br_cntr_info (env=0xf66dc0 <perf_env>, nr=0x0, width=0x7fffafff62c0) at util/env.c:653
#1 0x00000000005b1599 in symbol__account_br_cntr (branch=0x7fffcc3db580, evsel=0xfea2d0, offset=12, br_cntr=8) at util/annotate.c:345
#2 0x00000000005b17fb in symbol__account_cycles (addr=5658172, start=5658160, sym=0x7fffcc0ee420, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:389
#3 0x00000000005b1976 in addr_map_symbol__account_cycles (ams=0x7fffcd7b01d0, start=0x7fffcd7b02b0, cycles=539, evsel=0xfea2d0, br_cntr=8) at util/annotate.c:422
#4 0x000000000068d57f in hist__account_cycles (bs=0x110d288, al=0x7fffafff6540, sample=0x7fffafff6760, nonany_branch_mode=false, total_cycles=0x0, evsel=0xfea2d0) at util/hist.c:2850
#5 0x0000000000446216 in hist_iter__top_callback (iter=0x7fffafff6590, al=0x7fffafff6540, single=true, arg=0x7fffffff9e00) at builtin-top.c:737
#6 0x0000000000689787 in hist_entry_iter__add (iter=0x7fffafff6590, al=0x7fffafff6540, max_stack_depth=127, arg=0x7fffffff9e00) at util/hist.c:1359
#7 0x0000000000446710 in perf_event__process_sample (tool=0x7fffffff9e00, event=0x110d250, evsel=0xfea2d0, sample=0x7fffafff6760, machine=0x108c968) at builtin-top.c:845
#8 0x0000000000447735 in deliver_event (qe=0x7fffffffa120, qevent=0x10fc200) at builtin-top.c:1211
#9 0x000000000064ccae in do_flush (oe=0x7fffffffa120, show_progress=false) at util/ordered-events.c:245
#10 0x000000000064d005 in __ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP, timestamp=0) at util/ordered-events.c:324
#11 0x000000000064d0ef in ordered_events__flush (oe=0x7fffffffa120, how=OE_FLUSH__TOP) at util/ordered-events.c:342
#12 0x00000000004472a9 in process_thread (arg=0x7fffffff9e00) at builtin-top.c:1120
#13 0x00007ffff6e7dba8 in start_thread (arg=<optimized out>) at pthread_create.c:448
#14 0x00007ffff6f01b8c in __GI___clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:78
The cause is that perf_env__find_br_cntr_info tries to access a
null pointer pmu_caps in the perf_env struct. A similar issue exists
for homogeneous core systems which use the cpu_pmu_caps structure.
Fix this by populating cpu_pmu_caps and pmu_caps structures with
values from sysfs when calling perf top with branch stack sampling
enabled.
[1], LBR event logging introduced here:
https://lore.kernel.org/all/20231025201626.3000228-5-kan.liang@linux.intel.com/
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250612163659.1357950-2-thomas.falcon@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
alobakin
pushed a commit
that referenced
this pull request
Aug 22, 2025
Receiving HSR frame with insufficient space to hold HSR tag in the skb can result in a crash (kernel BUG): [ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1 [ 45.392559] ------------[ cut here ]------------ [ 45.392912] kernel BUG at net/core/skbuff.c:211! [ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef) [ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0 <snip registers, remove unreliable trace> [ 45.402911] Call Trace: [ 45.403105] <IRQ> [ 45.404470] skb_push+0xcd/0xf0 [ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0 [ 45.406513] br_forward_finish+0x128/0x260 [ 45.408483] __br_forward+0x42d/0x590 [ 45.409464] maybe_deliver+0x2eb/0x420 [ 45.409763] br_flood+0x174/0x4a0 [ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0 [ 45.411618] br_handle_frame+0xac3/0x1230 [ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0 [ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0 [ 45.424478] __netif_receive_skb+0x22/0x170 [ 45.424806] process_backlog+0x242/0x6d0 [ 45.425116] __napi_poll+0xbb/0x630 [ 45.425394] net_rx_action+0x4d1/0xcc0 [ 45.427613] handle_softirqs+0x1a4/0x580 [ 45.427926] do_softirq+0x74/0x90 [ 45.428196] </IRQ> This issue was found by syzkaller. The panic happens in br_dev_queue_push_xmit() once it receives a corrupted skb with ETH header already pushed in linear data. When it attempts the skb_push() call, there's not enough headroom and skb_push() panics. The corrupted skb is put on the queue by HSR layer, which makes a sequence of unintended transformations when it receives a specific corrupted HSR frame (with incomplete TAG). Fix it by dropping and consuming frames that are not long enough to contain both ethernet and hsr headers. Alternative fix would be to check for enough headroom before skb_push() in br_dev_queue_push_xmit(). In the reproducer, this is injected via AF_PACKET, but I don't easily see why it couldn't be sent over the wire from adjacent network. Further Details: In the reproducer, the following network interface chain is set up: ┌────────────────┐ ┌────────────────┐ │ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐ └────────────────┘ └────────────────┘ │ │ ┌──────┐ ├─┤ hsr0 ├───┐ │ └──────┘ │ ┌────────────────┐ ┌────────────────┐ │ │┌────────┐ │ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │ └────────────────┘ └────────────────┘ ┌┼ bridge │ ││ │ │└────────┘ │ ┌───────┐ │ │ ... ├──────┘ └───────┘ To trigger the events leading up to crash, reproducer sends a corrupted HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'. The first HSR-layer function to process this frame is hsr_handle_frame(). It and then checks if the protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that the skb is long enough. For the crashing frame it is not, and hence the skb->network_header and skb->mac_len fields are set incorrectly, pointing after the end of the linear buffer. I will call this a BUG#1 and it is what is addressed by this patch. In the crashing scenario before the fix, the skb continues to go down the hsr path as follows. hsr_handle_frame() then calls this sequence hsr_forward_skb() fill_frame_info() hsr->proto_ops->fill_frame_info() hsr_fill_frame_info() hsr_fill_frame_info() contains a check that intends to check whether the skb actually contains the HSR header. But the check relies on the skb->mac_len field which was erroneously setup due to BUG#1, so the check passes and the execution continues back in the hsr_forward_skb(): hsr_forward_skb() hsr_forward_do() hsr->proto_ops->get_untagged_frame() hsr_get_untagged_frame() create_stripped_skb_hsr() In create_stripped_skb_hsr(), a copy of the skb is created and is further corrupted by operation that attempts to strip the HSR tag in a call to __pskb_copy(). The skb enters create_stripped_skb_hsr() with ethernet header pushed in linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of ethernet header into the headroom, creating skb_in with a headroom of size 8. The subsequent __pskb_copy() then creates an skb with headroom of just 2 and skb->len of just 12, this is how it looks after the copy: gdb) p skb->len $10 = 12 (gdb) p skb->data $11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373", (gdb) p skb->head $12 = (unsigned char *) 0xffff888041e45380 "" It seems create_stripped_skb_hsr() assumes that ETH header is pulled in the headroom when it's entered, because it just pulls HSR header on top. But that is not the case in our code-path and we end up with the corrupted skb instead. I will call this BUG#2 *I got confused here because it seems that under no conditions can create_stripped_skb_hsr() work well, the assumption it makes is not true during the processing of hsr frames - since the skb_push() in hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I missed something here.* Next, the execution arrives in hsr_deliver_master(). It calls skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have enough space for the pull (as it only has 12 bytes in total at this point). *The skb_pull() here further suggests that ethernet header is meant to be pushed through the whole hsr processing and create_stripped_skb_hsr() should pull it before doing the HSR header pull.* hsr_deliver_master() then puts the corrupted skb on the queue, it is then picked up from there by bridge frame handling layer and finally lands in br_dev_queue_push_xmit where it panics. Cc: stable@kernel.org Fixes: 48b491a ("net: hsr: fix mac_len checks") Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com Signed-off-by: Jakub Acs <acsjakub@amazon.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Pull request contains: