Name

ngx_headers_more - Set and clear input and output headers...more than "add"!

This module is not distributed with the Nginx source. See the installation instructions.

Table of Contents

Name
Version
Synopsis
Description
Directives
Limitations
Installation
Compatibility
Community
- English Mailing List
- Chinese Mailing List
Bugs and Patches
Source Repository
Changes
Test Suite
TODO
Getting involved
Authors
Copyright & License
See Also

Version

This document describes headers-more-nginx-module v0.34 released on 17 July 2022.

Synopsis

 # set the Server output header
 more_set_headers 'Server: my-server';

 # set and clear output headers
 location /bar {
     more_set_headers 'X-MyHeader: blah' 'X-MyHeader2: foo';
     more_set_headers -t 'text/plain text/css' 'Content-Type: text/foo';
     more_set_headers -s '400 404 500 503' -s 413 'Foo: Bar';
     more_clear_headers 'Content-Type';

     # your proxy_pass/memcached_pass/or any other config goes here...
 }

 # set output headers
 location /type {
     more_set_headers 'Content-Type: text/plain';
     # ...
 }

 # set input headers
 location /foo {
     set $my_host 'my dog';
     more_set_input_headers 'Host: $my_host';
     more_set_input_headers -t 'text/plain' 'X-Foo: bah';

     # now $host and $http_host have their new values...
     # ...
 }

 # replace input header X-Foo *only* if it already exists
 more_set_input_headers -r 'X-Foo: howdy';

Description

This module allows you to add, set, or clear any output or input header that you specify.

This is an enhanced version of the standard headers module because it provides more utilities like resetting or clearing "builtin headers" like Content-Type, Content-Length, and Server.

It also allows you to specify an optional HTTP status code criteria using the -s option and an optional content type criteria using the -t option while modifying the output headers with the more_set_headers and more_clear_headers directives. For example,

 more_set_headers -s 404 -t 'text/html' 'X-Foo: Bar';

You can also specify multiple MIME types to filter out in a single -t option. For example,

more_set_headers -t 'text/html text/plain' 'X-Foo: Bar';

Never use other parameters like charset=utf-8 in the -t option values; they will not work as you would expect.

Input headers can be modified as well. For example

 location /foo {
     more_set_input_headers 'Host: foo' 'User-Agent: faked';
     # now $host, $http_host, $user_agent, and
     #   $http_user_agent all have their new values.
 }

The option -t is also available in the more_set_input_headers and more_clear_input_headers directives (for request header filtering) while the -s option is not allowed.

Unlike the standard headers module, this module's directives will by default apply to all the status codes, including 4xx and 5xx.

Back to TOC

Directives

Back to TOC

more_set_headers

syntax: more_set_headers [-t <content-type list>]... [-s <status-code list>]... [-a] <new-header>...

default: no

context: http, server, location, location if

phase: output-header-filter

Replaces (if any) or adds (if not any) the specified output headers when the response status code matches the codes specified by the -s option AND the response content type matches the types specified by the -t option.

If the "-a" option is specified, the specified output headers can be appended directly without clearing the old fields. The behavior of builtin headers such as "Content-Type", "Content-Length", "Server", etc. cannot be changed.

If either -s or -t is not specified or has an empty list value, then no match is required. Therefore, the following directive set the Server output header to the custom value for any status code and any content type:

   more_set_headers    "Server: my_server";

Existing response headers with the same name are always overridden. If you want to add headers incrementally, use the standard add_header directive instead.

A single directive can set/add multiple output headers. For example

   more_set_headers 'Foo: bar' 'Baz: bah';

Multiple occurrences of the options are allowed in a single directive. Their values will be merged together. For instance

   more_set_headers -s 404 -s '500 503' 'Foo: bar';

is equivalent to

   more_set_headers -s '404 500 503' 'Foo: bar';

The new header should be the one of the forms:

Name: Value
Name:
Name

The last two effectively clear the value of the header Name.

Nginx variables are allowed in header values. For example:

    set $my_var "dog";
    more_set_headers "Server: $my_var";

But variables won't work in header keys due to performance considerations.

Multiple set/clear header directives are allowed in a single location, and they're executed sequentially.

Directives inherited from an upper level scope (say, http block or server blocks) are executed before the directives in the location block.

Note that although more_set_headers is allowed in location if blocks, it is not allowed in the server if blocks, as in

   ?  # This is NOT allowed!
   ?  server {
   ?      if ($args ~ 'download') {
   ?          more_set_headers 'Foo: Bar';
   ?      }
   ?      ...
   ?  }

Behind the scene, use of this directive and its friend more_clear_headers will (lazily) register an ouput header filter that modifies r->headers_out the way you specify.

Back to TOC

more_clear_headers

syntax: more_clear_headers [-t <content-type list>]... [-s <status-code list>]... <new-header>...

default: no

context: http, server, location, location if

phase: output-header-filter

Clears the specified output headers.

In fact,

    more_clear_headers -s 404 -t 'text/plain' Foo Baz;

is exactly equivalent to

    more_set_headers -s 404 -t 'text/plain' "Foo: " "Baz: ";

or

    more_set_headers -s 404 -t 'text/plain' Foo Baz

See more_set_headers for more details.

The wildcard character, *, can also be used at the end of the header name to specify a pattern. For example, the following directive effectively clears any output headers starting by "X-Hidden-":

 more_clear_headers 'X-Hidden-*';

The * wildcard support was first introduced in v0.09.

Back to TOC

more_set_input_headers

syntax: more_set_input_headers [-r] [-t <content-type list>]... <new-header>...

default: no

context: http, server, location, location if

phase: rewrite tail

Very much like more_set_headers except that it operates on input headers (or request headers) and it only supports the -t option.

Note that using the -t option in this directive means filtering by the Content-Type request header, rather than the response header.

Behind the scene, use of this directive and its friend more_clear_input_headers will (lazily) register a rewrite phase handler that modifies r->headers_in the way you specify. Note that it always run at the end of the rewrite phase so that it runs after the standard rewrite module and works in subrequests as well.

If the -r option is specified, then the headers will be replaced to the new values only if they already exist.

Back to TOC

more_clear_input_headers

syntax: more_clear_input_headers [-t <content-type list>]... <new-header>...

default: no

context: http, server, location, location if

phase: rewrite tail

Clears the specified input headers.

In fact,

    more_clear_input_headers -t 'text/plain' Foo Baz;

is exactly equivalent to

    more_set_input_headers -t 'text/plain' "Foo: " "Baz: ";

or

    more_set_input_headers -t 'text/plain' Foo Baz

To remove request headers "Foo" and "Baz" for all incoming requests regardless of the content type, we can write

    more_clear_input_headers "Foo" "Baz";

See more_set_input_headers for more details.

The wildcard character, *, can also be used at the end of the header name to specify a pattern. For example, the following directive effectively clears any input headers starting by "X-Hidden-":

     more_clear_input_headers 'X-Hidden-*';

Back to TOC

Limitations

Unlike the standard headers module, this module does not automatically take care of the constraint among the Expires, Cache-Control, and Last-Modified headers. You have to get them right yourself or use the headers module together with this module.
You cannot remove the Connection response header using this module because the Connection response header is generated by the standard ngx_http_header_filter_module in the Nginx core, whose output header filter runs always after the filter of this module. The only way to actually remove the Connection header is to patch the Nginx core, that is, editing the C function ngx_http_header_filter in the src/http/ngx_http_header_filter_module.c file.

Back to TOC

Installation

Grab the nginx source code from nginx.org, for example, the version 1.17.8 (see nginx compatibility), and then build the source with this module:

 wget 'http://nginx.org/download/nginx-1.17.8.tar.gz'
 tar -xzvf nginx-1.17.8.tar.gz
 cd nginx-1.17.8/

 # Here we assume you would install you nginx under /opt/nginx/.
 ./configure --prefix=/opt/nginx \
     --add-module=/path/to/headers-more-nginx-module

 make
 make install

Download the latest version of the release tarball of this module from headers-more-nginx-module file list.

Starting from NGINX 1.9.11, you can also compile this module as a dynamic module, by using the --add-dynamic-module=PATH option instead of --add-module=PATH on the ./configure command line above. And then you can explicitly load the module in your nginx.conf via the load_module directive, for example,

load_module /path/to/modules/ngx_http_headers_more_filter_module.so;

Also, this module is included and enabled by default in the OpenResty bundle.

Back to TOC

Compatibility

The following versions of Nginx should work with this module:

1.21.x (last tested: 1.21.4)
1.19.x (last tested: 1.19.9)
1.17.x (last tested: 1.17.8)
1.16.x
1.15.x (last tested: 1.15.8)
1.14.x
1.13.x (last tested: 1.13.6)
1.12.x
1.11.x (last tested: 1.11.2)
1.10.x
1.9.x (last tested: 1.9.15)
1.8.x
1.7.x (last tested: 1.7.10)
1.6.x (last tested: 1.6.2)
1.5.x (last tested: 1.5.8)
1.4.x (last tested: 1.4.4)
1.3.x (last tested: 1.3.7)
1.2.x (last tested: 1.2.9)
1.1.x (last tested: 1.1.5)
1.0.x (last tested: 1.0.11)
0.9.x (last tested: 0.9.4)
0.8.x (last tested: 0.8.54)
0.7.x >= 0.7.44 (last tested: 0.7.68)

Earlier versions of Nginx like 0.6.x and 0.5.x will not work.

If you find that any particular version of Nginx above 0.7.44 does not work with this module, please consider reporting a bug.

Back to TOC

Community

Back to TOC

English Mailing List

The openresty-en mailing list is for English speakers.

Back to TOC

Chinese Mailing List

The openresty mailing list is for Chinese speakers.

Back to TOC

Bugs and Patches

Please submit bug reports, wishlists, or patches by

creating a ticket on the GitHub Issue Tracker,
or posting to the OpenResty community.

Back to TOC

Source Repository

Available on github at openresty/headers-more-nginx-module.

Back to TOC

Changes

The changes of every release of this module can be obtained from the OpenResty bundle's change logs:

http://openresty.org/#Changes

Back to TOC

Test Suite

This module comes with a Perl-driven test suite. The test cases are declarative too. Thanks to the Test::Nginx module in the Perl world.

To run it on your side:

 $ PATH=/path/to/your/nginx-with-headers-more-module:$PATH prove -r t

To run the test suite with valgrind's memcheck, use the following commands:

 $ export PATH=/path/to/your/nginx-with-headers-more-module:$PATH
 $ TEST_NGINX_USE_VALGRIND=1 prove -r t

You need to terminate any Nginx processes before running the test suite if you have changed the Nginx server binary.

Because a single nginx server (by default, localhost:1984) is used across all the test scripts (.t files), it's meaningless to run the test suite in parallel by specifying -jN when invoking the prove utility.

Some parts of the test suite requires modules proxy, rewrite, and echo to be enabled as well when building Nginx.

Back to TOC

TODO

Support variables in new headers' keys.

Back to TOC

Getting involved

You'll be very welcomed to submit patches to the author or just ask for a commit bit to the source repository on GitHub.

Back to TOC

Authors

Yichun "agentzh" Zhang (章亦春) <agentzh@gmail.com>, OpenResty Inc.
Bernd Dorn ( http://www.lovelysystems.com/ )

This wiki page is also maintained by the author himself, and everybody is encouraged to improve this page as well.

Back to TOC

Copyright & License

The code base is borrowed directly from the standard headers module in Nginx 0.8.24. This part of code is copyrighted by Igor Sysoev.

Copyright (c) 2009-2017, Yichun "agentzh" Zhang (章亦春) agentzh@gmail.com, OpenResty Inc.

Copyright (c) 2010-2013, Bernd Dorn.

The license text is available in the LICENSE file located in the root directory of the project.

Back to TOC

See Also

The original thread on the Nginx mailing list that inspires this module's development: "A question about add_header replication".
The orginal announcement thread on the Nginx mailing list: "The "headers_more" module: Set and clear output headers...more than 'add'!".
The original blog post about this module's initial development.
The echo module for Nginx module's automated testing.
The standard headers module.

Back to TOC

License

openresty/headers-more-nginx-module

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Contributors 15

Languages

Packages