Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.2.0

Operating System (OS)

Linux

OS Version

Pop! OS 22.04

Additional system information

Ryzen 2700X, RX 480, 32 gigs of ram... not relevant to this issue.

Printer

Sovol SV06 Plus

How to reproduce

1. Select the SV06 Plus printer.
2. Use Sovol Generic PLA as the filament
3. Use either the 0.20mm Standard or 0.18mm Optimal profiles, either works.
4. Add an Orca Cube to the build plate
5. Slice
6. Set the view to show the Speed
7. Look at the interior bridges, they are significantly faster than any other line, at the machine's max speed

Actual results

The internal bridges are 140mm/s

Expected results

The internal bridges should probably be something slower, like 38mm/s

Project file & Debug log uploads

OrcaCube_SV06Plus.zip

Checklist of files to include

• Log file
• Project file

Anything else?

The issue seems to be the Internal Bridge Speed, which is 150mm/s instead of 150%.

I'd double check the other Sovol printer profiles as well, to see if they have a similar issue.