IKEA Styrbar Remote Control - No MQTT messages from pressing arrow buttons #23227

spynappels · 2025-04-01T08:18:46Z

spynappels
Apr 1, 2025

I am running Zigbee2Tasmota on a Sonoff Zigbee Bridge pro, and it's working really well.
I have got a few smart devices from IKEA and have noticed a few issues that I'm sure can be addressed with just a little more knowledge on my end, so I'm asking the hive mind here.

I have one of the Styrbar remote controls with the large light bulb image at the top and the small ilght bulb image on the bottom, as well as a left and right arrow on the respective sides. Both single press and long press of both the top and bottom button work well, but I'm having some issues around using the side buttons.

Single press of either left or right button does nothing, nothing is seen on the console at all. Long press of both the right and left buttons both result in a Power 1 MQTT message being sent, duplicating a single press of the top button.

I expect that the remote is sending something when the left and right buttons are single pressed, but that it is simply not mapped to anything. Equally, I believe the long press of either button is simply mapped to the same function as a single press of the top button.

My questions are as follows:

Can the "raw" message from the remote be seen in any way, either on the console or somewhere else?
Can these then be mapped to any specific functions, or can existing mappings be changed?
I can also see the battery level in the Tasmota UI, but I don't see it exposed in any of the MQTT messages relating to this device, can that also be pulled from somewhere?

I have read the docs for Z2T multiple times, but unfortunately it is not 100% clear how the low level messages need to be formatted. I am ingesting the MQTT messages into Node-Red, but I'd like to be able to use the additional buttons on the remote control and also show battery level in my home dashboard. I'm comfortable working on the command line and console, I just need some pointers.

Thanks for any help.
Stefan

s-hadinger · 2025-04-01T08:45:41Z

s-hadinger
Apr 1, 2025
Collaborator

Setting weblog 3 or seriallog 3 will show you the details of the frames received. This is a good starting point to understanding what is happening.

Also, some device need a "magic spell" or specific bindings. It should be useful to have also detailed logs of what is happening during pairing. We will then get information about supported clusters.

0 replies

spynappels · 2025-04-01T09:15:55Z

spynappels
Apr 1, 2025
Author

So I assume if I'm accessing the Console through the WebUI, I suppose I use weblog 3 in my case?
I'll try that later when I get home, thanks.
Is there any documentation on creating specific bindings?

0 replies

spynappels · 2025-04-01T21:08:20Z

spynappels
Apr 1, 2025
Author

Hmm, interesting. the left and right arrows show nothing when weblog 3 is enabled. Is there a chance that it may not transmit anything? I don't have an RF sniffer to check...

3 replies

s-hadinger Apr 2, 2025
Collaborator

Indeed, if you see nothing it probably means that they send nothing. Can you provide the log when pairing the device?

robvanoostenrijk Jul 29, 2025

I am experiencing the same issue as @spynappels.

The remote receives on and off:

ON:

ZIG: {"ZbEZSPReceived":"45000004010600010100010000CDBCCB9A22FFFF0301020102"}
ZIG: {"ZbZCLReceived":{"groupid":0,"clusterid":"0x0006","srcaddr":"0x229A","srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"LinkQuality":89,"securityuse":0,"seqnumber":205,"fc":"0x01","frametype":1,"direction":0,"disableresp":0,"manuf":"0x0000","transact":2,"cmdid":"0x01","payload":""}}
ZigbeeZCLSend device: 0x229A, endpoint:1, cluster:0x0006, cmd:0x0B, send:"0100"
ZIG: ZbEZSPSend 3400009A220401060001010000000002010510020B0100
ZIG: ZbZCLRawReceived: {"0x229A":{"0006!01":"","Power":1,"Endpoint":1,"LinkQuality":89}}
RSL: SENSOR = {"ZbReceived":{"0x229A":{"Device":"0x229A","Name":"Remote","0006!01":"","Power":1,"Endpoint":1,"LinkQuality":89}}}
ZIG: {"ZbEZSPReceived":"340000E8"}
ZIG: {"ZbEZSPReceived":"3F00009A2204010600010100000000E8010000"}

OFF:

ZIG: {"ZbEZSPReceived":"45000004010600010100010000CCD8D29A22FFFF0301010002"}
ZIG: {"ZbZCLReceived":{"groupid":0,"clusterid":"0x0006","srcaddr":"0x229A","srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"LinkQuality":107,"securityuse":0,"seqnumber":204,"fc":"0x01","frametype":1,"direction":0,"disableresp":0,"manuf":"0x0000","transact":1,"cmdid":"0x00","payload":""}}
ZigbeeZCLSend device: 0x229A, endpoint:1, cluster:0x0006, cmd:0x0B, send:"0000"
ZIG: ZbEZSPSend 3400009A220401060001010000000001010510010B0000
ZIG: ZbZCLRawReceived: {"0x229A":{"0006!00":"","Power":0,"Endpoint":1,"LinkQuality":107}}
RSL: SENSOR = {"ZbReceived":{"0x229A":{"Device":"0x229A","Name":"Remote","0006!00":"","Power":0,"Endpoint":1,"LinkQuality":107}}}
ZIG: {"ZbEZSPReceived":"340000E7"}
ZIG: {"ZbEZSPReceived":"3F00009A2204010600010100000000E7010000"}

Pairing:

ZIG: {"ZbEZSPReceived":"220000"}
ZIG: {"ZbEZSPReceived":"19009C"}
ZIG: {"ZbEZSPReceived":"360000DB"}
ZIG: {"ZbEZSPReceived":"45000500003600000000000000DBFF000000FFFF03043C01"}
ZIG: {"ZbEZSPReceived":"3F0006FCFF00003600000000000000DB010000"}
ZIG: {"ZbEZSPReceived":"230000009A2237780DFEFFF8E24404"}
ZIG: {"ZbEZSPReceived":"24009A2237780DFEFFF8E2440203FFFF"}
ZIG: {"ZbEZSPReceived":"24009A2237780DFEFFF8E24401000000"}
RSL: RESULT = {"ZbState":{"Status":34,"IEEEAddr":"0x44E2F8FFFE0D7837","ShortAddr":"0x229A","ParentNetwork":"0x0000","JoinStatus":1,"Decision":0}}
ZIG: {"ZbEZSPReceived":"230000019A2237780DFEFFF8E24404"}
ZIG: {"ZbEZSPReceived":"620037780DFEFFF8E244"}
ZIG: {"ZbEZSPReceived":"45000400001300000000040000BFDCD39A22FFFF0C819A2237780DFEFFF8E2448002"}
RSL: RESULT = {"ZbState":{"Status":30,"IEEEAddr":"0x44E2F8FFFE0D7837","ShortAddr":"0x229A","PowerSource":false,"ReceiveWhenIdle":false,"Security":false}}
ZIG: ZbEZSPSend 3400009A2200000500000040010000050103059A22
ZIG: {"ZbEZSPReceived":"340000DD"}
ZIG: {"ZbEZSPReceived":"3F0006FDFF00001300000000040000BFFF0000"}
ZIG: {"ZbEZSPReceived":"45000000000580000040010000C0E8D69A22FFFF0605009A22010102"}
RSL: RESULT = {"ZbState":{"Status":32,"ActiveEndpoints":["0x01"]}}
ZigbeeZCLSend device: 0x229A, endpoint:1, cluster:0x0000, cmd:0x00, send:"05000400000001000700FEFF"
ZIG: ZbEZSPSend 3400009A220401000001014001000001010F00010005000400000001000700FEFF
ZIG: {"ZbEZSPReceived":"3F00009A2200000500000040010000DD010000"}
ZIG: {"ZbEZSPReceived":"340000DE"}
ZIG: {"ZbEZSPReceived":"45000004010000010140010000C1DCD39A22FFFF3E180101050000421152656D6F746520436F6E74726F6C204E32040000420E494B4541206F662053776564656E000000200801000020010700003003FEFF8602"}
ZIG: {"ZbZCLReceived":{"groupid":0,"clusterid":"0x0000","srcaddr":"0x229A","srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"LinkQuality":110,"securityuse":0,"seqnumber":193,"fc":"0x18","frametype":0,"direction":1,"disableresp":1,"manuf":"0x0000","transact":1,"cmdid":"0x01","payload":"050000421152656D6F746520436F6E74726F6C204E32040000420E494B4541206F662053776564656E000000200801000020010700003003FEFF86"}}
ZIG: ZbZCLRawReceived: {"0x229A":{"0000/0005":"Remote Control N2","0000/0004":"IKEA of Sweden","0000/0000":8,"0000/0001":1,"0000/0007":3,"Endpoint":1,"LinkQuality":110}}
RSL: SENSOR = {"ZbReceived":{"0x229A":{"Device":"0x229A","Name":"Remote","ModelId":"Remote Control N2","Manufacturer":"IKEA of Sweden","ZCLVersion":8,"AppVersion":1,"PowerSource":3,"Endpoint":1,"LinkQuality":110}}}
ZIG: {"ZbEZSPReceived":"3F00009A2204010000010140010000DE010000"}
ZIG: ZbEZSPSend 3400009A2200000400000040010000060104069A2201
ZIG: {"ZbEZSPReceived":"340000DF"}
ZIG: {"ZbEZSPReceived":"45000000000480000040010000C2DCD39A22FFFF2706009A2222010401200801070000010003002000001057FC7CFC0603000500060008001900001002"}
RSL: RESULT = {"ZbState":{"Status":33,"Device":"0x229A","Endpoint":"0x01","ProfileId":"0x0104","DeviceId":"0x0820","DeviceVersion":1,"InClusters":["0x0000","0x0001","0x0003","0x0020","0x1000","0xFC57","0xFC7C"],"OutClusters":["0x0003","0x0005","0x0006","0x0008","0x0019","0x1000"]}}
ZIG: {"ZbEZSPReceived":"3F00009A2200000400000040010000DF010000"}
ZIG: {"ZbEZSPReceived":"45000000000200000040010000C3DCD39A22FFFF0382000002"}
ZIG: {"ZbEZSPReceived":"9B0037780DFEFFF8E24406"}
ZIG: auto-bind `ZbBind {"Device":"0x229A","Endpoint":1,"Cluster":"0x0006"}`
ZIG: ZbEZSPSend 3400009A22000021000000400100000701160737780DFEFFF8E2440106000303AD4DFEFF840D0401
ZIG: {"ZbEZSPReceived":"340000E3"}
ZIG: {"ZbEZSPReceived":"45000000002180000040010000C6E4D59A22FFFF02070002"}
RSL: RESULT = {"ZbBind":{"Device":"0x229A","Name":"Remote","Status":0,"StatusMessage":"SUCCESS"}}
ZIG: {"ZbEZSPReceived":"3F00009A2200002100000040010000E3010000"}
ZIG: auto-bind `ZbBind {"Device":"0x229A","Endpoint":1,"Cluster":"0x0008"}`
ZIG: ZbEZSPSend 3400009A22000021000000400100000801160837780DFEFFF8E2440108000303AD4DFEFF840D0401
ZIG: {"ZbEZSPReceived":"340000E4"}
ZIG: {"ZbEZSPReceived":"45000000002180000040010000C7E0D49A22FFFF02080002"}
RSL: RESULT = {"ZbBind":{"Device":"0x229A","Name":"Remote","Status":0,"StatusMessage":"SUCCESS"}}
ZIG: {"ZbEZSPReceived":"3F00009A2200002100000040010000E4010000"}
ZIG: {"ZbEZSPReceived":"45000400003600000000000000C8E0D49A22FFFF0301B40102"}
ZIG: {"ZbEZSPReceived":"4500040401030001FF00010000C9E0D49A22FFFF0301000102"}
ZIG: {"ZbZCLReceived":{"groupid":0,"clusterid":"0x0003","srcaddr":"0x229A","srcendpoint":1,"dstendpoint":255,"wasbroadcast":1,"LinkQuality":113,"securityuse":0,"seqnumber":201,"fc":"0x01","frametype":1,"direction":0,"disableresp":0,"manuf":"0x0000","transact":0,"cmdid":"0x01","payload":""}}
ZigbeeZCLSend device: 0x229A, endpoint:1, cluster:0x0003, cmd:0x0B, send:"0100"
ZIG: ZbEZSPSend 3400009A220401030001010000000000010510000B0100
ZIG: ZbZCLRawReceived: {"0x229A":{"0003!01":"","IdentifyQuery":true,"Endpoint":1,"LinkQuality":113}}
RSL: SENSOR = {"ZbReceived":{"0x229A":{"Device":"0x229A","Name":"Remote","0003!01":"","IdentifyQuery":true,"Endpoint":1,"LinkQuality":113}}}
ZIG: {"ZbEZSPReceived":"340000E5"}
ZIG: {"ZbEZSPReceived":"3F00009A2204010300010100000000E5010000"}
ZIG: {"ZbEZSPReceived":"3F0006FCFF00003600000000000000C8FF0000"}
ZIG: {"ZbEZSPReceived":"3F0006FFFF0401030001FF00010000C9FF0000"}
ZIG: {"ZbEZSPReceived":"620037780DFEFFF8E244"}
ZIG: {"ZbEZSPReceived":"45000400000000000000040000CAB4C99A22FFFF0B8303AD4DFEFF840D04000002"}
ZIG: {"ZbEZSPReceived":"3F0006FDFF00000000000000040000CAFF0000"}
ZIG: {"ZbEZSPReceived":"45000400000600000000010000CBECD79A22FFFF0902FDFF04010119000002"}
ZIG: {"ZbEZSPReceived":"3F0006FDFF00000600000000010000CBFF0000"}
ZIG: {"ZbEZSPReceived":"19009D"}

I noticed that there are 6 endpoint clusters advertised:

0x0003 - Identify
0x0005 - Scenes
0x0006 - ON/OFF
0x0008 - Level Control
0x0019 - OTA
0x1000 - Touchlink

On ZigBee pairing the following binds are made:

ZbBind {"Device":"0x229A","Endpoint":1,"Cluster":"0x0006"}
ZbBind {"Device":"0x229A","Endpoint":1,"Cluster":"0x0008"}

Pressing the arrow buttons gives no indication on the Tasmota console with weblog 3.

However, after manually binding the 0x0005 - Scenes cluster using the following,

ZbBind {"Device":"0x229A","Endpoint":1,"Cluster":"0x0005"}

The console now shows messages for the arrow keys:

ZIG: ZbZCLRawReceived: {"0x229A":{"0005!07":"00010D00","ArrowClick":0,"Endpoint":1,"LinkQuality":120}}
RSL: SENSOR = {"ZbReceived":{"0x229A":{"Device":"0x229A","Name":"Remote","0005!07":"00010D00","ArrowClick":0,"Endpoint":1,"LinkQuality":120}}}
ZIG: {"ZbEZSPReceived":"340000F0"}
ZIG: {"ZbEZSPReceived":"3F00009A2204010500010100000000F0010000"}
ZIG: {"ZbEZSPReceived":"45000004010500010100010000D6E8D69A22FFFF09057C110A0701010D0002"}
ZIG: {"ZbZCLReceived":{"groupid":0,"clusterid":"0x0005","srcaddr":"0x229A","srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"LinkQuality":118,"securityuse":0,"seqnumber":214,"fc":"0x05","frametype":1,"direction":0,"disableresp":0,"manuf":"0x117C","transact":10,"cmdid":"0x07","payload":"01010D00"}}
ZigbeeZCLSend device: 0x229A, endpoint:1, cluster:0x0005, cmd:0x0B, send:"0700"
ZIG: ZbEZSPSend 3400009A22040105000101000000000A0107147C110A0B0700
ZIG: ZbZCLRawReceived: {"0x229A":{"0005!07":"01010D00","ArrowClick":1,"Endpoint":1,"LinkQuality":118}}
RSL: SENSOR = {"ZbReceived":{"0x229A":{"Device":"0x229A","Name":"Remote","0005!07":"01010D00","ArrowClick":1,"Endpoint":1,"LinkQuality":118}}}
ZIG: {"ZbEZSPReceived":"340000F1"}
ZIG: {"ZbEZSPReceived":"3F00009A2204010500010100000000F1010000"}

s-hadinger Aug 2, 2025
Collaborator

Good finding, thanks

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

IKEA Styrbar Remote Control - No MQTT messages from pressing arrow buttons #23227

Uh oh!

{{title}}

Uh oh!

Replies: 3 comments 3 replies

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Select a reply

Uh oh!

IKEA Styrbar Remote Control - No MQTT messages from pressing arrow buttons #23227

Uh oh!

spynappels Apr 1, 2025

Replies: 3 comments · 3 replies

Uh oh!

s-hadinger Apr 1, 2025 Collaborator

Uh oh!

spynappels Apr 1, 2025 Author

Uh oh!

spynappels Apr 1, 2025 Author

Uh oh!

s-hadinger Apr 2, 2025 Collaborator

Uh oh!

robvanoostenrijk Jul 29, 2025

Uh oh!

s-hadinger Aug 2, 2025 Collaborator

spynappels
Apr 1, 2025

Replies: 3 comments 3 replies

s-hadinger
Apr 1, 2025
Collaborator

spynappels
Apr 1, 2025
Author

spynappels
Apr 1, 2025
Author

s-hadinger Apr 2, 2025
Collaborator

s-hadinger Aug 2, 2025
Collaborator